Mutations that affect regulation of the korB gene of Streptomyces lividans plasmid plJ101 alter plasmid transmission

Using the catechol dehydrogenase gene as a reporter, we isolated random mutations in the plJ101 korB gene operator/promoter (OP) region that affect korB expression and regulation. We mapped these mutations to inverted repeat sequences within the promoter and studied their effects on binding of the KorB repressor protein to the OP, on expression of the korB gene, and on plasmid transmission during mating. Additionally, we investigated the biological effects of KorB binding to a locus (sti, for st rong I ncompatibility) adjacent to the korB OP and implicated in plJ101 replication. Our results identify sites that influence the synthesis and autoregulation of KorB; they also show that interaction of KorB with sti affects repression of korB and transmission of plasmids to spores of recipients.     

Stability of plasmid vector plJ303 in Streptomyces lividans TK24 during laboratory-scale fermentations

Plasmid plJ303 stability in Streptomyces lividans cultures has been studied by measuring plasmid copy number under various growth conditions. An increase in mean plasmid copy number was normally seen during early rapid growth in both shaken culture and stirred vessel fermentations at 28 degrees C. Maximum copy numbers were consistently attained in early stationary phase followed by a decline (of variable amount) upon further incubation. The imposition of environmental stress (high growth temperature, i.e., 37 degrees C, and low dissolved oxygen tension, i.e., <5% air saturation) led to a plasmid copy number of zero and a 50% reduction, respectively. Interestingly, the relative proportions of plasmid topoisomers changed with time since progressively more supercoiled forms were observed throughout the stationary phase. Plasmid dimers were also observed in some cultures, and no evidence of structural plasmid instability was found. In general, this host-vector system seemed remarkably stable under normal growth conditions. However, copious organic acid production by the host was observed and was thought to be undesirable for good heterologous gene expression of a secreted protein. (c) 1993 John Wiley & Sons, Inc.     

Unraveling the essential role in conjugation of the Tra protein of Streptomyces lividans plasmid pIJ101

Plasmid pIJ101 from Streptomyces lividans encodes a single gene, tra, that is essential for both plasmid transfer and mobilization of chromosomes during mating. The tra gene product (Tra) is a membrane protein, a portion of which shows similarity to transfer proteins of other streptomycete plasmids as well as additional bacterial chromosome partitioning proteins. This paper reviews past and present work that has focused on elucidating the precise role of the Tra protein of pIJ101 in conjugation in Streptomyces.     

Cloning and expression of a Streptomyces cholesterol oxidase gene in Streptomyces lividans with plasmid pIJ702

The cholesterol oxidase gene (cho) of Streptomyces sp. was cloned into Streptomyces lividans with the vector pIJ702. Deletion analysis of the recombinant plasmid showed that entire coding sequence of the cho gene was located within a 2.5-kilobase segment of the chromosomal DNA obtained from the cholesterol oxidase-producing strain. When cloned cells of S. lividans were grown in an appropriate medium, the cells produced severalfold more cholesterol oxidase extracellularly than did the producing strain.     

Cloning and expression of a Streptomyces cholesterol oxidase gene in Streptomyces lividans with plasmid pIJ702.

The cholesterol oxidase gene (cho) of Streptomyces sp. was cloned into Streptomyces lividans with the vector pIJ702. Deletion analysis of the recombinant plasmid showed that entire coding sequence of the cho gene was located within a 2.5-kilobase segment of the chromosomal DNA obtained from the cholesterol oxidase-producing strain. When cloned cells of S. lividans were grown in an appropriate medium, the cells produced severalfold more cholesterol oxidase extracellularly than did the producing strain.     

Plasmid transfer in Streptomyces lividans: identification of a kil-kor system associated with the transfer region of pIJ101.

The 8.9-kilobase Streptomyces plasmid pIJ101 is self-transmissible at high frequency into recipient strains. By genetic analysis of the transfer region of the plasmid, we identified six plasmid-encoded loci involved in gene transfer and the associated pocking phenomenon. Two loci, kilA and kilB, could not be cloned into Streptomyces lividans on a minimal pIJ101-based replicon unless suitable kil-override (kor) genes were present, either in cis or in trans. korA could control the lethal effects of both kilA and kilB, whereas korB could control only the effects of kilB. KilB mutants were defective in their pocking reaction; kilA mutants produced no visible pocks whatsoever. Mutations in two other loci, tra and spd, produced no pocks and defective pocks, respectively. These results suggest that kilA, kilB, tra, and spd are intimately involved in plasmid transfer and that the actions of kilA and kilB are regulated by the products of the korA and korB genes.     

Site-specific integration in Saccharopolyspora erythraea and multisite integration in Streptomyces lividans of actinomycete plasmid pSE101.

An 11.3-kilobase-pair plasmid, designated pSE101, exists in Saccharopolyspora erythraea NRRL 2338 as an integrated sequence (pSE101int) at a unique chromosomal location and in the free form in less than an average of 1 copy per 10 chromosomes. The plasmid sequence is missing from S. erythraea NRRL 2359. Restriction maps of the free and integrated forms of pSE101 showed point-to-point correspondence. Plasmid pECT2 was constructed by ligation of pSE101, pBR322, and the gene for thiostrepton resistance (tsr). When introduced by polyethylene glycol-mediated transformation into protoplasts of S. erythraea NRRL 2359, all thiostrepton-resistant regenerants examined were found to carry a single copy of pECT2 in the integrated state at a single chromosomal site. The chromosomal site of pECT2 integration in strain NRRL 2359 (attB) corresponded to the chromosomal location of pSE101int in strain NRRL 2338. The plasmid crossover site (attP) was mapped to the plasmid site that corresponded to the site of interruption of the plasmid sequence in the host carrying pSE101int, indicating that site-specific integrative recombination had occurred. An additional 2.8-kilobase-pair chromosomal sequence homologous to a segment of pSE101 was also observed in strains NRRL 2338 and NRRL 2359. After introduction of pECT2 into Streptomyces lividans, approximately half of the transformants examined were found to carry the plasmid as a stable, autonomously replicating element. The other half carried a single copy of pECT2 as an integrated sequence, but the location of pECT2int in Streptomyces lividans varied from one transformant to another. In each case, integrative crossover used the attP site. A model is proposed to account for the determination of the particular state of pSE101 in Streptomyces lividans.     

Complete nucleotide sequence of the Streptomyces lividans plasmid pIJ101 and correlation of the sequence with genetic properties.

The complete nucleotide sequence of the multicopy Streptomyces plasmid pIJ101 has been determined and correlated with previously published genetic data. The circular DNA molecule is 8,830 nucleotides in length and has a G+C composition of 72.98%. The use of a computer program, FRAME, enabled identification in the sequence of seven open reading frames, four of which, tra (621 amino acids [aa]), spdA (146 aa), spdB (274 aa), and kilB (177 aa), appear to be genes involved in plasmid transfer. At least two of the above genes are predicted to be transcribed by known promoters that are regulated in trans by the products of the korA (241 aa) and korB (80 aa) loci on the plasmid. The segment of the plasmid capable of autonomous replication contains one large open reading frame (rep; 450 aa) and a noncoding region presumed to be the origin of replication. Four other small (less than 90 aa) open reading frames are also present on the plasmid, although no function can be attributed to them. The sequence of the pIJ101 replication segment present in several widely used cloning vectors (e.g., pIJ350 and pIJ702) has also been determined, so that the complete nucleotide sequences of these vectors are now known.     

Direct repeat sequences are essential for function of the cis-acting locus of transfer (clt) of Streptomyces phaeochromogenes plasmid pJV1

The functionality of direct and inverted repeat sequences inside the cis acting locus of transfer (clt) of the Streptomyces plasmid pJV1 was determined by testing the effect of different deletions on plasmid transfer. The results show that the single most important element for pJV1 clt function is a series of evenly spaced 9 bp long direct repeats which match the consensus CCGCACA(C/G)(C/G), since their deletion caused a dramatic reduction in plasmid transfer. The presence of these repeats in the absence of any other clt sequences allowed plasmid transfer to occur at a frequency that was at least two orders of magnitude higher than that obtained in the complete absence of clt. A database search revealed regions with a similar organization, and in the same position, in Streptomyces plasmids pSN22 and pSLS, which have transfer proteins homologous to those of pJV1.     

Linear plasmid SLP2 of Streptomyces lividans is a composite replicon

SLP2 is a 50 kb linear plasmid in Streptomyces lividans that contains short (44 bp) terminal inverted repeats and covalently bound terminal proteins. The nucleotide sequence of SLP2 was determined. The rightmost 15.4 kb sequence is identical to that of the host chromosome, including the Tn4811 sequence at the border, which is interrupted by an insertion sequence (IS) element in SLP2. Examination of the flanking target sequences of Tn4811 suggests a previous recombinational event there. The 43 putative protein coding sequences contained many involved in replication (including two terminal protein homologues), partitioning, conjugal transfer and intramycelial spread. The terminally located helicase-like gene ttrA was necessary for conjugal transfer. The two telomeres diverge significantly in primary sequence, while preserving similar secondary structures. Mini-linear plasmids containing these telomeres replicated in S. lividans using the chromosomally encoded terminal protein. In addition, two pseudotelomere sequences are present near the left telomere. The G+C content and GC or AT skew profiles exhibit complex distributions. These, plus the inferred recombination at the right arm, indicate that SLP2 has evolved through rounds of exchanges involving at least three replicons.     

Cloning of the xylanase gene of Streptomyces lividans

The xylanase (xln) gene of Streptomyces lividans 1326 was cloned by functional complementation of the xylanase-negative and beta-1,4-glucan-glucanohydrolase-negative double mutant of S. lividans using the multicopy plasmid pIJ702. Three clones had a common 2-kb DNA fragment as determined by restriction mapping and Southern hybridization. These clones secreted a xylanase of Mr 43,000 which reacted with specific anti-xylanase antibodies and corresponded exactly to the enzyme previously isolated from the wild-type strain. The DNA fragment likely carried the full structural gene, the xln promoter and also the regulatory sequence, since the xylanase activity was inducible by xylan. Enzyme levels of up to 380 IU/ml of culture filtrate were obtained.     

Cloning of a Microbispora bispora cellobiohydrolase gene in Streptomyces lividans

The cellobiohydrolase II (CBHII) of Microbispora bispora, originally cloned in Escherichia coli, was subcloned into Streptomyces lividans using shuttle vectors pSKN 01 and pSKN 02. The enzyme was secreted from Streptomyces, whereas it was intracellular in E. coli. The yields of CBHII produced by S. lividans transformants were 15–20-fold higher than those produced by E. coli transformants. The optimal pH of M. bispora native cellobiohydrolase and the cloned enzyme from S. lividans is 6.5. The thermal and pH stability of CHBII produced in M. bispora, E. coli and S. lividans were compared. Enzyme produced in E. coli was inactivated more rapidly (k = 0.252 min^–1 at 90° C; 90% inactivation after 10 min vs. 0.119 min^–1 for the others). CBHII was monitored following electrophoretic separation by reaction with a monoclonal antibody. The apparent molecular mass of the protein produced from the S. lividans clone was 93 kDa, the same as that of the native enzyme, but that of the enzyme produced in E. coli was smaller (82 kDa). Correspondence to: P. Hu     

Transfer of plasmid RSF1010 by conjugation from Escherichia coli to Streptomyces lividans and Mycobacterium smegmatis.

The plasmid RSF1010 belongs to a class of plasmids (IncQ) that replicate in a range of bacterial hosts. Although non-self-transmissible, it can be mobilized at high frequency between different gram-negative bacterial species if transfer functions are supplied in trans. We report the transfer of RSF1010 by conjugation from Escherichia coli to the gram-positive actinomycetes Streptomyces lividans and Mycobacterium smegmatis. In its new hosts, the plasmid was stable with respect to structure and inheritance and conferred high-level resistance to streptomycin and sulfonamide. This is the first reported case of conjugative transfer of a naturally occurring plasmid between gram-negative and gram-positive bacteria.     

Molecular cloning and expression of a Streptomyces sarcosine oxidase gene in Streptomyces lividans.

A genomic library of Streptomyces sp. KB210-8SY, prepared in the plasmid vector pACYC184, was screened to obtain the gene encoding sarcosine oxidase with probes based on the amino acid sequence of the protein. A plasmid pSOXS13, which was isolated from a clone identified by hybridization with the probes, contained a 8.4-kb insert of Streptomyces DNA. When the 2.0-kb MIuI/EcoRV DNA fragment of pSOXS13 was inserted into the Streptomyces vector pIJ680 and introduced into S. lividans, the transformants produced 100-fold more sarcosine oxidase intracellularly than KB210-8SY. The nucleotides of the 1.7-kb fragment containing the sarcosine oxidase gene were sequenced. An open reading frame encoded a mature sarcosine oxidase consisting of 388 amino acids, with a calculated molecular mass of 42,107 daltons.