Integrated process of starch ethanol and cellulosic lactic acid for ethanol and lactic acid production

The sequential production of bioethanol and lactic acid from starch materials and lignocellulosic materials was investigated as ethanol fermentation broth (EFB) can provide nutrients for lactic acid bacteria. A complete process was developed, and all major operations are discussed, including ethanol fermentation, broth treatment, lactic acid fermentation, and product separation. The effect of process parameters, including ethanol fermentation conditions, treatment methods, and the amount of EFB used in simultaneous saccharification and fermentation (SSF), is investigated. Under the selected process conditions, the integrated process without additional chemical consumption provides a 1.08 acid/alcohol ratio (the broth containing 22.4 g/L ethanol and 47.6 g/L lactic acid), which corresponds to a polysaccharide utilization ratio of 86.9 %. Starch ethanol can thus promote cellulosic lactic acid by providing important nutrients for lactic acid bacteria, and in turn, cellulosic lactic acid could promote starch ethanol by improving the profit of the ethanol production process. Two process alternatives for the integration of starch ethanol and cellulosic lactic acid are compared, and some suggestions are given regarding the reuse of yeast following the cellulosic SSF step for lactic acid production.     

燃料乙醇制造的“零能耗零污染”趋势

酒精蒸馏废液有充足的非淀粉生物质可供沼气转化,沼液营养丰富可作酵母发酵工艺用水。通过酒精高浓度发酵、沼气高效转化、沼气热电联产、差压蒸馏、环形过程工艺等产能、节能、无废技术的研发和集成,将最终完成木薯原料燃料酒精制造向“零能耗、零污染”生产技术的转型。     

Effects of preculture variability on clavulanic acid fermentation.

The production profile of clavulanic acid by Streptomyces clavuligerus was shown to be strongly dependent on inoculum activity. Two sets of fermentations (A and B) were investigated at industrial pilot-plant scale using complex media. Type A fermentations were inoculated using late exponential growth phase mycelia. Type B fermentations were inoculated using mycelia harvested at stationary phase. Productivities throughout type A fermentations were consistently higher than type B, reaching a maximum at about 70 h and then decaying to the same final productivities at 140 h of type B runs. Several scheduling alternatives, based on combinations of the two inocula types and different fermentation lengths, were compared in terms of the overall process economics (fermentation and downstream). An increase of ca. 22% on the overall process profit is predicted using late exponential growth phase inocula and a fermentation duration of only 96 h. A new operating strategy was thus proposed for inoculum production based on the control of preculture activity using off-gas analysis. This method ensures higher productivity and better batch-to-batch reproducibility of clavulanic acid fermentations than traditional methods based on constant age inocula.     

拉曼光谱分析技术在资源微生物发酵性能评价中的应用

微生物发酵过程是细胞新陈代谢进行物质转化的过程,为了提高目标产物的转化率,需要对微生物发酵动态特性进行实时分析,以便实时优化发酵过程。拉曼光谱(Raman spectroscopy)量化测试作为一种有应用前景的在线过程分析技术,可以在避免微生物污染的条件下,实现精准监测,进而用于优化控制微生物发酵过程。【目的】以运动发酵单胞菌(Zymomonas mobilis)为例,建立微生物发酵过程中葡萄糖、木糖、乙醇和乳酸浓度拉曼光谱预测模型,并进行准确性验证。【方法】采用浸入式在线拉曼探头,收集运动发酵单胞菌发酵过程中多个组分的拉曼光谱,采用偏最小二乘法对光谱信号进行预处理和多元数据分析,结合离线色谱分析数据,对拉曼光谱进行建模分析和浓度预测。【结果】针对运动发酵单胞菌,首先实现拉曼分析仪对单一产品乙醇发酵过程的精准检测,其次基于多元变量分析,建立葡萄糖、乙醇和乳酸浓度变化的预测模型,实现对发酵过程中各成分浓度变化的准确有效分析。【结论】成功建立了一种评价资源微生物尤其是工业菌株发酵液多种组分的拉曼光谱分析方法。该方法为运动发酵单胞菌等工业菌株利用多组分底物工业化生产不同产物的实时检测,以及其他微生物尤其工业菌株的选育和过程优化提供了新方法。     

Optimization of human serum albumin production in methylotrophic yeast Pichia pastoris by repeated fed-batch fermentation

An optimization method for repeated fed-batch fermentation was established with the aim of improving the recombinant human serum albumin (rHSA) production in Pichia pastoris. A simulation model for fed-batch fermentation was formulated and the optimal methanol-feeding policy calculated by dynamic programming method using five different methanol-feeding periods. The necessary state variables were collected from the calculated results and used for further optimization of repeated fed-batch fermentation. The optimal operation policy was investigated using the pre-collected state variables by estimating the overall profit per total methanol-feeding time. The calculated results indicated that the initial cell mass from the 2nd fed-batch fermentation on should be set at 35 or 40 g and methanol-feeding time at 264 h. In repeated fed-batch fermentation using the optimal operation policy, actual culture volume was in good agreement with the values simulated by model equations, but some discrepancy was observed in rHSA production. Minimum experiments were therefore carried out to re-evaluate rHSA production levels, which were then applied in re-calculations to determine the optimal operation policy. The optimal policy for repeated fed-batch fermentation established in the present study (i.e., 4-times-repeated fed-batch fermentation) achieved a 47% increase in annual rHSA production. Optimization of the culture period also brought about a 28% increase in annual rHSA production even in simple (not repeated) fed-batch fermentation.     

Vc生产菌“神舟七号”搭载育种

选取3株性状不同的Vc二步发酵生产菌搭载于"神舟七号"飞船进行空间诱变,返回地面后,经富集培养和分离,获得近12000株诱变菌株。采用试管微量培养并监测pH值法作3次初筛,获300余株优良株,再经摇瓶发酵定酸、糖法作3次复筛,选出12株优良菌株。新菌株摇瓶发酵转化率提高了5%～7%。研究了新菌株生产的最适发酵条件,调整了部分工艺过程,应用于大生产,转化率提高4%～5%。     

Biotechnological lycopene production by mated fermentation of <Emphasis Type="Italic">Blakeslea trispora</Emphasis>

A semi-industrial process (800-l fermentor) for lycopene production by mated fermentation of Blakeslea trispora plus (+) and minus (–) strains has been developed. The culture medium was designed at the flask scale, using a program based on a genetic algorithm; and a fermentation process by means of this medium was developed. Fermentation involves separate vegetative phases for (+) and (–) strains and inoculation of the production medium with a mix of both together. Feeding with imidazole or pyridine, molecules known to inhibit lycopene cyclase enzymatic activity, enhanced lycopene accumulation. Different raw materials and physical parameters, including dissolved oxygen, stirring speed, air flow rate, temperature, and pH, were checked in the fermentor to get maximum lycopene production. Typical data for the fermentation process are presented and discussed. This technology can be easily scaled-up to an industrial application for the production of this carotenoid nowadays widely in demand.     

Integrated production for biodiesel and 1,3-propanediol with lipase-catalyzed transesterification and fermentation

Biodiesel, a renewable alternative to fossil energy, has shown great prospects for global proliferation in the past decade. Lipase catalyzed transesterification for biodiesel production, as a biological process with many advantages has drawn increasing attention. As a by-product, glycerol accounts for about 10% w/w of biodiesel during the process of biodiesel production. As a result, the conversion of glycerol has become a common problem which has to be resolved if considering large amount of biodiesel production. Glycerol can be fermented into 1,3-propanediol, a high value added chemical with a promising future in the polymers, for example, polytrimethylene terephthalate, and also fermentation approaches for 1,3-propanediol production which have drawn more and more attention due to advantages such as relatively low investment, mild reaction conditions and using renewable sources as the starting materials. Based on the latest technology advancements in lipase-mediated transformation for biodiesel production, the aerobic fermentation technology and genetic engineering for 1,3-propanediol production, and the integrated production of 1,3-propanediol from crude glycerol could be a promising way to improve the profit of the whole process during biodiesel production.     

Strain engineering and process optimization for enhancing the production of a thermostable steryl glucosidase in <Emphasis Type="Italic">Escherichia coli</Emphasis>

Biodiesels produced from transesterification of vegetable oils have a major problem in quality due to the presence of precipitates, which are mostly composed of steryl glucosides (SGs). We have recently described an enzymatic method for the efficient removal of SGs from biodiesel, based on the activity of a thermostable β-glycosidase from Thermococcus litoralis. In the present work, we describe the development of an Escherichia coli-based expression system and a high cell density fermentation process. Strain and process engineering include the assessment of different promoters to drive the expression of a codon-optimized gene, the co-expression of molecular chaperones and the development of a high cell density fermentation process. A 200-fold increase in the production titers was achieved, which directly impacts on the costs of the industrial process for treating biodiesel.     

Production of gamma-aminobutyric acid by <Emphasis Type="Italic">Lactobacillus brevis</Emphasis> NCL912 using fed-batch fermentation

Background  

Gamma-aminobutyric acid is a major inhibitory neurotransmitter in mammalian brains, and has several well-known physiological functions. Lactic acid bacteria possess special physiological activities and are generally regarded as safe. Therefore, using lactic acid bacteria as cell factories for gamma-aminobutyric acid production is a fascinating project and opens up a vast range of prospects for making use of GABA and LAB. We previously screened a high GABA-producer Lactobacillus brevis NCL912 and optimized its fermentation medium composition. The results indicated that the strain showed potential in large-scale fermentation for the production of gamma-aminobutyric acid. To increase the yielding of GABA, further study on the fermentation process is needed before the industrial application in the future. In this article we investigated the impacts of pyridoxal-5'-phosphate, pH, temperature and initial glutamate concentration on gamma-aminobutyric acid production by Lactobacillus brevis NCL912 in flask cultures. According to the data obtained in the above, a simple and effective fed-batch fermentation method was developed to highly efficiently convert glutamate to gamma-aminobutyric acid.     

Ethanol production by <Emphasis Type="Italic">Zymomonas mobilis</Emphasis> CHZ2501 from industrial starch feedstocks

The optimal conditions of ethanol fermentation process by Zymomonas mobilis CHZ2501 were investigated. Brown rice, naked barley, and cassava were selected as representatives of the starch-based raw material commercially available for ethanol production. Considering enzyme used for saccharification of starch, the ethanol productivity with complex enzyme was higher than glucoamylase. With regards to the conditions of saccharification, the final ethanol productions of simultaneous saccharification and pre-saccharified process for 1 h were not significantly different. The result suggested that it is possible for simultaneous saccharification and fermentation as a cost-effective process for ethanol production by eliminating the separate saccharification. Additionally, the fermentation rate in early fermentation stage was generally increased with increase of inoculum volume. As the result, optimal condition for ethanol production was simultaneous saccharification and fermentation with complex enzyme and 5% inoculation. Under the same condition, the volumetric productivities and ethanol yields were attained to 3.26 g/L·h and 93.5% for brown rice, 2.62 g/L·h and 90.4% for naked barley, and 3.28 g/L·h and 93.7% for cassava, respectively.     

Intact cell mass spectrometry as a progress tracking tool for batch and fed-batch fermentation processes

Penicillin production during a fermentation process using industrial strains of Penicillium chrysogenum is a research topic permanently discussed since the accidental discovery of the antibiotic. Intact cell mass spectrometry (ICMS) can be a fast and novel monitoring tool for the fermentation progress during penicillin V production in a nearly real-time fashion. This method is already used for the characterization of microorganisms and the differentiation of fungal strains; therefore, the application of ICMS to samples directly harvested from a fermenter is a promising possibility to get fast information about the progress of fungal growth. After the optimization of the ICMS method to penicillin V fermentation broth samples, the obtained ICMS data were evaluated by hierarchical cluster analysis or an in-house software solution written especially for ICMS data comparison. Growth stages of a batch and fed-batch fermentation of Penicillium chrysogenum are differentiated by one of those statistical approaches. The application of two matrix-assisted laser desorption/ionization time-of-flight (MALDI–TOF) instruments in the linear positive ion mode from different vendors demonstrated the universal applicability of the developed ICMS method. The base for a fast and easy-to-use method for monitoring the fermentation progress of P. chrysogenum is created with this ICMS method developed especially for fermentation broth samples.     

High cell density fermentation of <Emphasis Type="Italic">Gluconobacter oxydans</Emphasis> DSM 2003 for glycolic acid production

Gluconobacter oxydans has a lower biomass yield. Uniform design (UD) was applied to determine the optimum composition of the critical media and their mutual interactions for increased biomass yield of Gluconobacter oxydans DSM 2003 in shake flasks. Fed-batch fermentation process for biomass was optimized in a 3.7-l fermentor. By undertaking a preliminary and improved fed-batch fermentation-process strategy, a cell density of 6.0 g/l (DCW) was achieved in 22 h and 14.1 g/l (DCW) in 35 h, which is the highest cell density of G. oxydans produced thus far in a 3.7-l bioreactor. The biomass production was increased by 135% compared with that using the original cultivation strategy. Bioconversion of ethylene glycol to glycolic acid was catalyzed by the resting cells of G. oxydans DSM 2003, and conversion rate reached 86.7% in 48 h. In summary, the approach including high-density fermentation of G. oxydans DSM 2003 and bioconversion process was established and proved to be an effective method for glycolic acid production.     

Profiling of dynamic changes in the microbial community during the soy sauce fermentation process

Soy sauce is a traditional condiment manufactured by natural inoculation and mixed culture fermentation. As is well known, it is the microbial community that plays an important role in the formation of its flavors. However, to date, its dynamic changes during the long period of fermentation process are still unclear, intensively constraining the improvement and control of the soy sauce quality. In this work, we revealed the dynamic changes of the microbial community by combining a cultured dependent method and a cultured independent method of polymerase chain reaction (PCR)-denaturing gradient gel electrophoresis. Results indicated that the two methods verified and complemented each other in profiling microbial community, and that significant dynamics of the microbial community existed during the fermentation process, especially the strong inhibition of the growth of most of the microbes when entering into the mash stage from the koji stage. In the analysis of bacterial community, Staphylococcus and Bacillus were found to be the dominant bacteria and detected in the whole fermentation process. Kurthia and Klebsiella began to appear in the koji stage and then fade away in the early stage of the mash fermentation. In the analysis of fungal community, Aspergillus sojae and Zygosaccharomyces rouxii were found to be the dominant fungi in the koji and mash fermentation, respectively. It was clearly shown that when A. sojae decreased and disappeared in the middle stage of the mash fermentation, Z. rouxii appeared and increased at the meantime. Aspergillus parasiticus, Trichosporon ovoides and Trichosporon asahii also appeared in the koji and the early period of the mash fermentation and disappeared thereafter. Similar to Z. rouxii, Millerozyma farinosa and Peronospora farinosa were also found spontaneously which appeared in the mid-late period of the mash fermentation. The principal component analysis suggested that the microbial community underwent significant changes in the early period of the fermentation and, thereafter, tended to the stabilization in the mid-late periods. This study gave us important clues to understand the fermentation process and can serve as a foundation for improving the quality of soy sauce in the future.     

Comparative proteome analysis of robust <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> insights into industrial continuous and batch fermentation

A robust Saccharomyces cerevisiae strain has been widely applied in continuous and batch/fed-batch industrial fermentation. However, little is known about the molecular basis of fermentative behavior of this strain in the two realistic fermentation processes. In this paper, we presented comparative proteomic profiling of the industrial yeast in the industrial fermentation processes. The expression levels of most identified protein were closely interrelated with the different stages of fermentation processes. Our results indicate that, among the 47 identified protein spots, 17 of them belonging to 12 enzymes were involved in pentose phosphate, glycolysis, and gluconeogenesis pathways and glycerol biosynthetic process, indicating that a number of pathways will need to be inactivated to improve ethanol production. The differential expressions of eight oxidative response and heat-shock proteins were also identified, suggesting that it is necessary to keep the correct cellular redox or osmotic state in the two industrial fermentation processes. Moreover, there are significant differences in changes of protein levels between the two industrial fermentation processes, especially these proteins associated with the glycolysis and gluconeogenesis pathways. These findings provide a molecular understanding of physiological adaptation of industrial strain for optimizing the performance of industrial bioethanol fermentation. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Continuous production of ethanol by yeast "immobilized" in a membrane-contained fermentor

A dialysate-feed, immobilized-cell dialysis continuous fermentation system was investigated as a method of relieving product inhibition in the conversion of glucose to ethanol by cells of Saccharomyces cerevisiae ATCC 4126. The substrate was fed into a continuous dialysate circuit and then into a batch fermentor circuit via diffusion through the microporous membranes of an intermediate dialyzer. Simultaneously, product was withdrawn from the fermentor circuit through the dialyzer membranes into the dialysate circuit and out in the effluent. Since the fermentor was operated without an effluent, the cells essentially were immobilized and converted substrate to product by maintenance metabolism. Contrary to prior results with this novel system for the continuous fermentation of lactose to lactate by lactobacillus cells, a steady state of yeast cells in the fermentor did not occur initially but was obtained by the depletion of medium nitrogen and the prevention of cell breakage, although the substrate and product concentrations then became unsteady. The inherent advantages of the system was offset in the ethanol fermentation by relatively low productivity, which appeared to be limited by membrane permeability.     

Improved production of <Emphasis Type="Italic">Pseudomonas</Emphasis> sp. ECU1011 acetyl esterase by medium design and fed-batch fermentation

We optimized culture medium and batch-fed fermentation conditions to enhance production of an acetyl esterase from Pseudomonas sp. ECU1011 (PSAE). This enzyme enantioselectively deacetylates α-acetoxyphenylacetic acid. The medium was redesigned by single-factor and statistical optimization. The addition of ZnSO₄ enhanced enzyme production by 37%. Yeast extract concentration was directly associated with the enzyme production. The fermentation was scaled up in a 5-l fermenter with the optimized medium, and the correlations between enzyme production and dissolved oxygen, pH, and feeding strategy were investigated. The fermentation process was highly oxygen-demanding, pH sensitive and mandelic acid-inducible. The fermentation pH was controlled at 7.5 by a pH and dissolved oxygen feedback strategy. Feeding mandelic acid as both a pH regulator and an enzyme inducer increased the enzyme production by 23%. The results of the medium redesign experiments were confirmed and explained in fed-batch culture experiments. Mathematical models describing the fermentation processes indicated that the enzyme production was strongly associated with cell growth. The optimized pH and dissolved oxygen stat fed-batch process resulted high volumetric production of PSAE (4166 U/l, 7.2-fold higher than the initial) without enantioselectivity decline. This process has potential applications for industrial production of chiral mandelic acid or its derivatives.     

Inactivation of <Emphasis Type="Italic">dhaD</Emphasis> and <Emphasis Type="Italic">dhaK</Emphasis> abolishes by-product accumulation during 1,3-propanediol production in <Emphasis Type="Italic">Klebsiella pneumoniae</Emphasis>

1,3-Propanediol (1,3-PD) can be used for the industrial synthesis of a variety of compounds, including polyesters, polyethers, and polyurethanes. 1,3-PD is generated from petrochemical and microbial sources. 1,3-Propanediol is a typical product of glycerol fermentation, while acetate, lactate, 2,3-butanediol, and ethanol also accumulate during the process. Substrate and product inhibition limit the final concentration of 1,3-propanediol in the fermentation broth. It is impossible to increase the yield of 1,3-propanediol by using the traditional whole-cell fermentation process. In this study, dhaD and dhaK, the genes for glycerol dehydrogenase and dihydroxyacetone kinase, respectively, were inactivated by homologous recombination in Klebsiella pneumoniae. The dhaD/dhaK double mutant (designated TC100), selected from 5,000 single or double cross homologous recombination mutants, was confirmed as a double cross by using polymerase chain reaction. Analysis of the cell-free supernatant with high-performance liquid chromatography revealed elimination of lactate and 2,3-butanediol, as well as ethanol accumulation in TC100, compared with the wild-type strain. Furthermore, 1,3-propanediol productivity was increased in the TC100 strain expressing glycerol dehydratase and 1,3-PDO dehydrogenase regulated by the arabinose P_BAD promoter. The genetic engineering and medium formulation approaches used here should aid in the separation of 1,3-propanediol from lactate, 2,3-butanediol, and ethanol and lead to increased production of 1,3-propanediol in Klebsiella pneumoniae.     

Application of dynamic calorimetry for monitoring fermentation processes

The rate of heat evolution (kcal/liter-hr) in mycelial fermentations for novobiocin and cellulase production with media containing noncellular solids was measured by an in situ dynamic calorimetric procedure. Thermal data so obtained have proved significant both in monitoring cell concentration during the trophophase (growth phase) and in serving as a physiological variable in the fermentation process. The validity of this technique has been demonstrated by closing the overall material and energy balances. The maintenance energy in a batch fermentation can also be calculated by integrating heat evolution data. This integration method is applicable to a fermentation lacking a precise cell growth curve. The maintenance coefficient, obtained for the novobiocin fermentation by Streptomyces niveus, is equal to 0.028 g glucose equivalent/g cell-hr. The production of novobiocin in the idio-phase (production phase) also correlates well with the amount of energy catabolixed for maintenance and this results in an observed conversion yield of glucose to novobiocin of 11.8 mg of novobiocin produced per gram of glucose catabolized. A new physiological variable, kilocalories of heat evolved per millimole of oxygen consumed, has been proposed to monitor the state of cells during the fermentation. This method may provide a simple way to monitor on-line shifts in the efficiency of cell respiration and changes in growth yields during a microbial process.     

High yield of mannosylglycerate production by upshock fermentation and bacterial milking of trehalose-deficient mutant <Emphasis Type="Italic">Thermus thermophilus</Emphasis> RQ-1

A production process, using upshock fermentation and osmotic downshock, for the effective production/excretion of mannosylglycerate (MG) by the trehalose-deficient mutant of the strain Thermus thermophilus RQ-1 has been developed. In the first phase of fed-batch fermentation, the knockout mutant was grown at 70°C on a NaCl-free medium. After the culture reached the end of the exponential growth phase, upshift in temperature and NaCl concentration was applied. The temperature was increased to 77°C, and NaCl was added up to 3.0% and kept constant during the second phase of fermentation. Although this shift in cultivation parameters caused a dramatic drop of cell density, a significant improvement in accumulation of MG up to 0.64 μmol/mg protein compared to batch fermentations (0.31 μmol/mg protein) was achieved. A total yield of 4.6 g MG/l of fermentation broth was obtained in the dialysis bioreactor with a productivity of 0.29 g MG l⁻¹ h⁻¹. The solute was released from the harvested biomass by osmotic downshock using demineralized water at 70°C. More than 90% of the intracellularly accumulated solute was recovered from the water fraction. The process was very efficient, as hyperosmotic shock, release of the solute, and reiterative fed-batch fermentation could be repeated at least four times.