Comparative Biology of Two Natural Variants of the IncQ-2 Family Plasmids,pRAS3.1 and pRAS3.2

Plasmids pRAS3.1 and pRAS3.2 are two closely related, natural variants of the IncQ-2 plasmid family that have identical plasmid backbones except for two differences. Plasmid pRAS3.1 has five 6-bp repeat sequences in the promoter region of the mobB gene and four 22-bp iterons in its oriV region, whereas pRAS3.2 has only four 6-bp repeats and three 22-bp iterons. Plasmid pRAS3.1 was found to have a higher copy number than pRAS3.2, and we show that the extra 6-bp repeat results in an increase in mobB and downstream mobA/repB expression. Placement of repB (primase) behind an arabinose-inducible promoter in trans resulted in an increase in repB expression and an approximately twofold increase in the copy number of plasmids with identical numbers of 22-bp iterons. The pRAS3 plasmids were shown to have a previously unrecognized toxin-antitoxin plasmid stability module within their replicons. The ability of the pRAS3 plasmids to mobilize the oriT regions of two other plasmids of the IncQ-2 family, pTF-FC2 and pTC-F14, suggested that the mobilization proteins pRAS3 are relaxed and can mobilize oriT regions with substantially different sequences. Plasmids pRAS3.1 and pRAS3.2 were highly incompatible with plasmids pTF-FC2 and pTC-F14, and this incompatibility was removed on inactivation of an open reading frame situated downstream of the mobCDE mobilization genes rather than being due to the 22-bp oriV-associated iterons. We propose that the pRAS3 plasmids represent a third, γ incompatibility group within the IncQ-2 family plasmids.Plasmids of the IncQ family are small (<20 kb), have a broad host range, and are highly promiscuous due to their ability to be mobilized very efficiently by self-transmissible plasmids such as the IncP plasmids. They have been divided into two families, IncQ-1 and IncQ-2, based on the amino acid sequence relatedness of their RepA (helicase), RepB (primase), and RepC (DNA-binding) replication proteins and because the mobilization proteins of the two families are unrelated, consisting of three or five genes, respectively (31). IncQ-1 group plasmids include RSF1010 and the near-identical R1162, pDN1, pIE1107, pIE1115, and pIE1130, while IncQ-2 plasmids include pTF-FC2, pTC-F14, and pRAS3.IncQ-2 plasmids pRAS3.1 and pRAS3.2 were isolated in Norway from the fish pathogens Aeromonas salmonicida subsp. salmonicida and atypical A. salmonicida, respectively, while investigating plasmids that conferred resistance to tetracycline (21). The two plasmids encode identical replication and mobilization proteins, with the most important differences in the plasmid backbone being that pRAS3.1 has four 22-bp iterons in its oriV region and five 6-bp repeat sequences upstream of its mobB gene, whereas pRAS3.2 has only three iterons and four 6-bp repeat sequences. No biological studies were carried out in the initial report of the pRAS3 plasmids. As a contribution to our studies on the evolution of IncQ plasmids, our longer-term aim is to address the question of why two natural versions of the plasmid exist. Here we report on the major differences in the biology of the two plasmids. In addition, we discovered the presence of repC and mobB genes that were not detected when the sequence of pRAS3 plasmids was previously reported. We also discovered a putative toxin-antitoxin (TA) postsegregational system different from that found in other members of the IncQ plasmids and tested it for functionality.The IncQ-1 plasmids are subdivided into incompatibility groups α, β, and γ, (31), whereas the IncQ-2 plasmids are subdivided into two incompatibility groups, α and β (14). In this work we also report on the incompatibility between the pRAS3 plasmids and other members of the IncQ-2 plasmid family as well as the IncQ-1 family plasmids. Furthermore, we compare the functional relatedness of the pRAS3 mobilization system with that of previously studied IncQ-2 plasmids.     

A global non-conjugative Tet C plasmid,pRAS3, from Aeromonas salmonicida

Two 11.8 kb non-conjugative, but mobilizable R plasmids designated pRAS3.1 and pRAS3.2 were isolated from Aeromonas salmonicida subspecies salmonicida and atypical A. salmonicida, respectively. Differences between the plasmids were of minor extent and they are considered as being variants of the same plasmid, pRAS3. The genes repA, repB, mobA, mobC, mobD, and mobE were organized similar to corresponding genes in the small, mobilizable plasmid pTF-FC2 isolated from Acidithiobacillus ferrooxidans (previously Thiobacillus ferrooxidans). The nucleotide identity between these genes from pRAS3.1 and pTF-FC2 ranged from 89.5 to 98.2%. The tetA(C), tetR(C), and approximately 960 base pairs adjacent to tetR(C) were highly similar to the nucleotide sequence in pSC101. Plasmid pRAS3 was also found in a Scottish A. salmonicida strain, and appears to be identical to the R plasmid pJA8102-2 isolated from A. salmonicida in Japan.     

Isolation of a new broad-host-range IncQ-like plasmid, pTC-F14, from the acidophilic bacterium Acidithiobacillus caldus and analysis of the plasmid replicon

A moderately thermophilic (45 to 50 degrees C), highly acidophilic (pH 1.5 to 2.5), chemolithotrophic Acidithiobacillus caldus strain, f, was isolated from a biooxidation process used to treat nickel ore. Trans-alternating field electrophoresis analysis of total DNA from the A. caldus cells revealed two plasmids of approximately 14 and 45 kb. The 14-kb plasmid, designated pTC-F14, was cloned and shown by replacement of the cloning vector with a kanamycin resistance gene to be capable of autonomous replication in Escherichia coli. Autonomous replication was also demonstrated in Pseudomonas putida and Agrobacterium tumefaciens LBA 4404, which suggested that pTC-F14 is a broad-host-range plasmid. Sequence analysis of the pTC-F14 replicon region revealed five open reading frames and a replicon organization like that of the broad-host-range IncQ plasmids. Three of the open reading frames encoded replication proteins which were most closely related to those of IncQ-like plasmid pTF-FC2 (amino acid sequence identities: RepA, 81%; RepB, 78%; RepC, 74%). However, the two plasmids were fully compatible and pTC-F14 represents a new IncQ-like plasmid replicon. Surprisingly, asymmetrical incompatibility was found with the less closely related IncQ plasmid R300B derivative pKE462 and the IncQ-like plasmid derivative pIE1108. Analysis of the pTC-F14 oriV region revealed five direct repeats consisting of three perfectly conserved 22-bp iterons flanked by iterons of 23 and 21 bp. Plasmid pTC-F14 had a copy number of 12 to 16 copies per chromosome in both E. coli, and A. caldus. The rep gene products of pTC-F14 and pTF-FC2 were unable to functionally complement each other's oriV regions, but replication occurred when the genes for each plasmid's own RepA, RepB, and RepC proteins were provided in trans. Two smaller open reading frames were found between the repB and repA genes of pTC-F14, which encode proteins with high amino acid sequence identity (PasA, 81%; PasB, 72%) to the plasmid addiction system of pTF-FC2. This is the second time a plasmid stability system of this type has been found on an IncQ-like plasmid.     

Characterization of a novel cryptic plasmid, pHLHK26, in Laribacter hongkongensis

We report the complete nucleotide sequence and characterization of a cryptic plasmid, pHLHK26, recovered from a strain of Laribacter hongkongensis isolated from a patient with community acquired gastroenteritis. pHLHK26 consists of 8700 bp, with G + C content 51.3%. The copy number (mean +/- SD) is 0.57 +/- 0.07 and it is stable after four passages (about 240 generations) in the absence of selection. There is a predicted origin of replication that consists of a DnaA box and five 22-bp direct repeats. pHLHK26 has four ORFs with two genes encoded in the sense direction and the other two in antisense direction. These four ORFs encode a putative plasmid partitioning protein of the ParA family, a putative protein that contains putative ADP-ribose 1"-phosphatase activity belonging to the Appr-1-p processing enzyme family, a putative recombinase (TniR) of the resolvase/invertase family, and a putative replication protein, respectively. We speculate that pHLHK26 is a theta, possibly Class A, replicative plasmid, as it contains an origin of replication with AT-rich region, a number of iterons and a DnaA box and a gene that encodes a replicative protein most homologous to those of other theta replicative plasmids and it shares eight of the nine positions of the consensus sequence TTAT(C/A)CA(C/A)A (TTTTCCACA in pHLHK26) in the DnaA boxes observed in other classical examples of Class A plasmids of this group.     

Regulation of DNA replication by iterons: an interaction between the ori2 and incC regions mediated by RepE-bound iterons inhibits DNA replication of mini-F plasmid in Escherichia coli.

In bacteria, plasmids and some DNA viruses, DNA replication is initiated and regulated by binding of initiator proteins to repetitive sequences. To understand the control mechanism we used the plasmid mini-F, whose copy number is stringently maintained in Escherichia coli, mainly by its initiator protein RepE and the incC region. The monomers of RepE protein bound to incC iterons, which exert incompatibility in trans and control the copy number of mini-F plasmid in cis. Many incompatibility defective mutants carrying mutations in their incC iterons had lost the affinity to bind to RepE, while one mutant retained high level binding affinity. The mutated incC mini-F plasmids lost the function to control the copy number. The copy number of the wild-type mini-F plasmid did not increase in the presence of excess RepE. These results suggested that the control of replication by incC iterons does not rely on their capacity to titrate RepE protein. Using a ligation assay, we found that RepE proteins mediated a cross-link structure between ori2 and incC, for which the dimerization domain of RepE and the structure of incC seem to be important. The structure probably causes inhibition of extra rounds of DNA replication initiation on mini-F plasmids, thereby keeping mini-F plasmid at a low copy number.     

Cell cycle analysis of plasmid-containing Escherichia coli HB101 populations with flow cytometry

The relationship between cell mass and cell number dynamics for bacteria such as Escherichia coli depends on the cell cycle parameters C and D. Effects of plasmid copy number on these cell cycle parameters have been studied for Escherichia coli HB101 containing pMB1 plasmids propagated at different copy numbers ranging from 12 to 122. Determination of cell cycle and cell size parameters was accomplished using flow cytometry data on single-cell light scattering and DNA content frequency functions in conjunction with a mathematical model of cell population statistics. Two independent methods for estimating C and D intervals based on flow cytometry were developed and applied with essentially identical results. The presence of plasmids decreases the C and D periods, mean cell sizes, and initiation masses for chromosome replication by 14, 24, 38, and 18%, respectively, relative to corresponding values for plasmid-free host cells. Plasmid copy number has a negligible influence on these parameters, suggesting that host-plasmid inter actions which determine these properties are centered on the single plasmid selected for replication according to the random selection model established for ColE1-type plasmids.     

Effects of recombinant plasmid content on growth properties and cloned gene product formation in Escherichia coli

Plasmid-host cell interactions have been investigated experimentally using Escherichia coli HB101, plasmid RSF1050 which contains the origin of replication of pMB1, and four other closely related copy number mutant plasmids. Growth characteristics of these recombinant strains and beta-lactamase activity expressed from a plasmid gene were investigated in Luria broth (LB) and in minimal medium (M9) containing in some cases casamino acids or different concentrations of alpha-methylglucoside, a competitive inhibitor of glucose transport. Maximum specific growth rates in LB and minimal media were reduced for increasing plasmid content per cell. Plasmid copy number increased when specific growth rate was reduced by changing medium composition. Growth rates of high copy number strains were less sensitive to alpha-methylglucoside than lower copy number strains and the plasmidfree host. The overall efficiency of plasmid gene expression, measured as the ratio of beta-lactamase specific activity to plasmid content, decreased significantly with increasing plasmid content in LB medium.     

Functional limits of oriP, the Epstein-Barr virus plasmid origin of replication.

The Epstein-Barr virus (EBV) genome contains two cis-acting elements which are required for stable extrachromosomal plasmid maintenance in latently infected cells. The first consists of 20 30-base-pair (bp) repeats, each of which contains a DNA-binding site for EBV nuclear antigen 1 (EBNA-1), the trans-acting factor required for plasmid persistence. The second element is composed of a 65-bp dyad symmetry, containing four EBNA-1-binding sites. Deletion mutants were constructed which reduce the number of EBNA-1-binding sites in the 30-bp repeats, alter the number of EBNA-1-binding sites in the dyad region, or truncate the dyad element. The effect of the deletion mutations on plasmid maintenance was examined by transfecting recombinant plasmids, containing both the mutated EBV sequences and a drug resistance marker, into D98-Raji cells. The plasmids were tested for their ability to generate drug-resistant D98-Raji cell colonies and their capacity to be maintained in an extrachromosomal form without undergoing extensive rearrangements. EBV plasmids with 12 or 15 copies of the 30-bp repeats were wild type in both assays. Plasmids with just two or six copies of these repeated elements failed to generate drug-resistant colonies at a normal level, and normal episomal plasmids were not detected in the resulting colonies. Rare colonies of cells resulting from transfection of these two- or six-copy mutants contained rearranged, episomal forms of the input plasmids. The rearrangements most often produced head-to-tail oligomers containing a minimum of eight 30-bp repeated elements. The rearranged plasmids were shown to be revertant for plasmid maintenance in that they yielded wild-type or greater numbers of drug-resistant colonies and persisted at the wild-type or a greater episomal copy number. By use of an EBV plasmid that contained no 30-bp elements, no revertants could be isolated. One to five copies of a synthetic linker corresponding to a consensus 30-bp repeated element inserted into a plasmid with no 30-bp elements now permitted the generation of oligomeric, episomal forms of the mutant test plasmid. These experiments demonstrate a requirement for a minimal number (six to eight copies) of the 30-bp repeated element. Deletions in the 65-bp dyad region had little or no effect upon the ability to generate enhanced numbers of drug-resistant D98-Raji colonies, indicating that the 30-bp repeated element is predominantly required for this phenotype.(ABSTRACT TRUNCATED AT 400 WORDS)     

Cloning and Characterization of theoriRegion of pSW1200 ofErwinia stewartii:Similarity with Plasmid P1

Theoriregion of anErwinia stewartiiplasmid, pSW1200 (106 kb), has been cloned and sequenced. This region consists of a gene encoding a protein which has 91% similarity and 73% identity with the RepA protein of bacteriophage P1. Theoriregion also consists of eight copies of 19-bp iterons which are highly homologous to the iterons of P1. Similar to plasmid P1, pSW1200 replicon has a copy number of approximately 1. On the other hand, the copy number increases about ninefold if three of the iterons located downstream fromrepAgene are deleted. We also demonstrate that pGEM-5Z consisting of a copy of P1 iteron is incompatible with a pSW1200 derivative, pSW1201, suggesting that pSW1200 and P1 DNA are incompatible and both belong to the IncY group.     

Partial Characterization of Small Plasmids fromCorynebacterium renale

A naphthalene-degrading strain of corynebacteria, Corynebacterium renale, harbors multiple small plasmids designated pCR1, pCR2, pCR3, and pCR4 with sizes of 1.4, 3.2, 4.4, and 5.7 kb, respectively. Plasmid pCR1 of 1.4 kb is the smallest plasmid reported in this group of bacteria and is present in high copy number. Attempts to clone whole pCR1 in Escherichia coli were unsuccessful but two of its fragments (750 and 650 bp) could be separately cloned in it. The 4.4-kb plasmid, pCR3, bears considerable restriction pattern similarity to a 4.4-kb plasmid belonging to the pBL1 group of cryptic plasmid of corynebacteria but has no sequence homology, suggesting that pCR3 represents a new member of the 4.4-kb group of corynebacterial plasmids.     

Location of the origin of replication for the 7.5-kb Chlamydia trachomatis plasmid.

The hypothetical origin of replication for the 7.5-kb plasmid common to Chlamydia trachomatis is believed to be in a region of the plasmid that contains four 22-bp tandem repeats preceded by an A-T-rich region. To test this hypothesis, replication of plasmid DNA in metabolically active reticulate bodies of the Lymphogranuloma venereum biovar of C. trachomatis was examined by electron microscopy. The results presented show that the origin of replication appears to be near the tandem repeats of pCHL2. In addition, replication of the 7.5-kb plasmid is unidirectional, and the copy number during replication is 7-10. The evidence presented suggests that C. trachomatis has a homologue to the Escherichia coli dnaA gene and that this homologue might be involved in replication of the C. trachomatis 7.5-kb plasmid.     

Partial characterization of a small, multiple-copy plasmid from Streptomyces espinosus and the derivation of a high copy-number deletion mutant

An organism classified as Streptomyces espinosus was found to carry an approx. 9.2-kb plasmid. This plasmid, designated pUC6, has a copy number of 30-40 per host genome equivalent. Plasmid pUC1061, a copy-number mutant of pUC6, was isolated after in vitro deletion of an approx. 2.0-kb XhoI restriction fragment. Plasmid pUC1061 has a copy number of 500-600. Plasmid pUC1061 appears to be incompatible with pUC6 and will transform a pUC6-containing culture at a frequency of approx. 1%. The sizes, restriction maps and copy numbers of plasmids pUC6 and pUC1061 indicate these may be valuable vectors for gene cloning Streptomyces.     

IncN plasmid replicon. A deletion and subcloning analysis

A DNA segment of approximately 2000 base-pairs bounded by restriction enzyme sites for PvuII and containing the minimal replicon of an N group plasmid was characterized. A natural derivative of this miniplasmid was found to have undergone a deletion within one of two tandem iteron families, the group I iterons. Further analysis showed that all plasmid-determined functions essential for stable maintenance in Escherichia coli were localized to a contiguous region of DNA of 1019 nucleotides that excludes entirely these iterons. However, the loss of these iterons led to an increase in plasmid copy number. This indicates that members of the group I iteron-family have a role in determining plasmid copy number perhaps by titrating a plasmid-specified trans-acting product. The 2000 base-pair segment contains six open reading frames of 40 or more amino acid residues. The essential segment contains a 368 nucleotide region that must be present in cis and within which there are three "GATC" sequences and a putative Escherichia coli DnaA protein-binding sequence (dnaA box). An interesting feature is that the cis-acting region is present entirely within a presumptive rep gene. The essential segment contains four open reading frames, only one of which has an Escherichia coli canonical ribosome-binding site. The 2000 base-pair miniplasmid has two separable regions determining N group plasmid incompatibility.     

Homologous recombination and mutagenesis of gamma-irradiated plasmid DNA in Escherichia coli host cells

Plasmid DNA was used to study gamma-radiation-induced recombination and mutagenesis in Escherichia coli host cells. Plasmid pBRP1, a derivative of pBR322 containing the lac operon of E. coli, was irradiated with 60Co gamma rays prior to transformation into E. coli strains of different recA and lac genotypes. Plasmid-chromosome recombination was assayed in lacY1 host cells, whereas plasmid mutagenesis was assayed in delta lac host cells lacking chromosomal sequences homologous to the plasmid. Both recombinant and mutant plasmids were identified by the phenotypic changes in lactose utilization, and confirmed by restriction analysis of isolated plasmids. Plasmid-chromosome recombination was induced to high levels (about 20% of survivors at 700 Gy) and was dependent on the host recA gene. Plasmid mutagenesis occurred at lower levels (about 1.5% of survivors at 600 Gy) and was relatively independent of the recA gene. Plasmid survival was unaffected by the presence or absence of host recA mutations or the potential for plasmid-chromosome recombination.     

Minimal essential origin of plasmid pSC101 replication: requirement of a region downstream of iterons.

The minimal replication origin (ori) of the plasmid pSC101 was defined as an about 220-bp region under the condition that the Rep (or RepA) protein, a plasmid-encoded initiator protein, was supplied in trans. The DnaA box is located at one end of ori, as in other plasmids, like mini-F and P1. The other border is a strong binding site (IR-1) of Rep which is palindromic sequence and lies in an about 50-bp region beyond the repeated sequences (iterons) in ori. This IR-1 is located just upstream of another strong Rep binding site (IR-2), the operator site of the structure gene of Rep (rep), but its function has not been determined. The present study shows that the IR-1 sequence capable of binding to Rep is essential for plasmid replication with a nearly normal copy number. Furthermore, a region between the third iteron and IR-1 is also required in a sequence-specific fashion, since some one-base substitution in this region inactivate the origin function. It is likely that the region also is a recognition site of an unknown protein. Three copy number mutations of rep can suppress any one-base substitution mutation. On the other hand, the sequence of a spacer region between the second and the third iterons, which is similar to that of the downstream region of the third iteron, can be changed without loss of the origin function. The requirement of the region downstream of iterons in pSC101 seems to be unique among iteron-driven plasmid replicons.     

Imprecise excision of plasmid pE194 from the chromosomes of Bacillus subtilis pE194 insertion strains.

Plasmid pE194 has been shown to be rescued by integration after cultivation of infected Bacillus subtilis recE4 cells at a restrictive high temperature. The plasmid is also spontaneously excised from the chromosome at a low frequency by precise or imprecise excision (J. Hofemeister, M. Israeli-Reches, and D. Dubnau, Mol. Gen. Genet. 189:58-68, 1983). We have investigated nine excision plasmids, carrying insert DNA 1 to 6 kbp in length, either in a complete pE194 or in a partially deleted pE194 copy. Type 1 (additive) excision plasmids have the left- and right-junction DNAs preserved as 13-bp direct repeats (5'-GGGGAGAAAACAT-3') corresponding to the region between positions 864 and 876 in pE194. In type 2 (substitutive) excision plasmids, a conserved 13-bp sequence remains only at the right junction while the left junction has been deleted during the excision process. The type 3 excision plasmid carries at each junction the tetranucleotide 5'-TCCC-3', present in pE194 between positions 1995 and 1998. Although we isolated the excision plasmids from different integration mutants, the insert DNAs of eight independently isolated plasmids showed striking sequence homology, suggesting that they originated from one distinct region of the B. subtilis chromosome. Thus, we postulate that imprecise excision of pE194 occurs most frequently after its translocation from the original insertion site into a preferred excision site within the host chromosome. The imprecise excision from this site occurs at excision breakpoints outside the pE194-chromosome junctions in a chromosomal region which remains to be investigated further.     

Characterization of a theta-type plasmid from Lactobacillus sakei: a potential basis for low-copy-number vectors in lactobacilli

The complete nucleotide sequence of the 13-kb plasmid pRV500, isolated from Lactobacillus sakei RV332, was determined. Sequence analysis enabled the identification of genes coding for a putative type I restriction-modification system, two genes coding for putative recombinases of the integrase family, and a region likely involved in replication. The structural features of this region, comprising a putative ori segment containing 11- and 22-bp repeats and a repA gene coding for a putative initiator protein, indicated that pRV500 belongs to the pUCL287 subfamily of theta-type replicons. A 3.7-kb fragment encompassing this region was fused to an Escherichia coli replicon to produce the shuttle vector pRV566 and was observed to be functional in L. sakei for plasmid replication. The L. sakei replicon alone could not support replication in E. coli. Plasmid pRV500 and its derivative pRV566 were determined to be at very low copy numbers in L. sakei. pRV566 was maintained at a reasonable rate over 20 generations in several lactobacilli, such as Lactobacillus curvatus, Lactobacillus casei, and Lactobacillus plantarum, in addition to L. sakei, making it an interesting basis for developing vectors. Sequence relationships with other plasmids are described and discussed.     

Development of a gene cloning system for the hydrogen-producing marine photosynthetic bacterium Rhodopseudomonas sp.

Seventy-six strains of marine photosynthetic bacteria were analyzed by agarose gel electrophoresis for plasmid DNA content. Among these strains, 12 carried two to four different plasmids with sizes ranging from 3.1 to 11.0 megadaltons. The marine photosynthetic bacterium Rhodopseudomonas sp. NKPB002106 had two plasmids, pRD06S and pRD06L. The smaller plasmid, pRD06S, had a molecular weight of 3.8 megadaltons and was cut at a single site by restriction endonucleases SalI, SmaI, PstI, XhoI, and BglII. Moreover, the marine photosynthetic bacterium Rhodopseudomonas sp. NKPB002106 containing plasmid pRD06 had a satisfactory growth rate (doubling time, 7.5 h), a hydrogen-producing rate of 0.96 mumol/mg (dry weight) of cells per h, and nitrogen fixation capability. Plasmid pRD06S, however, had neither drug resistance nor heavy-metal resistance, and its copy number was less than 10. Therefore, a recombinant plasmid consisting of pRD06S and Escherichia coli cloning vector pUC13 was constructed and cloned in E. coli. The recombinant plasmid was transformed into Rhodopseudomonas sp. NKPB002106. As a result, Rhodopseudomonas sp. NKPB002106 developed ampicillin resistance. Thus, a shuttle vector for gene transfer was constructed for marine photosynthetic bacteria.