Isolation and characterization of a Scenedesmus acutus strain to be used for bioremediation of urban wastewater

Green microalgae, due to their short growth cycle and to their ability to photosynthetically fix carbon dioxide producing an oil-rich biomass, have been proposed as an attractive alternative feedstock for the production of “second generation” biofuels. However, it has been anticipated that owing to their ability to colonize very different environments characterized by high levels of nitrogen, they can also be good candidates for bioremediation, thus integrating environmental protection with sustainable biomass production. We have isolated a strain belonging to Scenedesmus genus from urban wastewater. This isolate, Scenedesmus acutus PVUW12, was tested for its ability to grow and actively deplete eutrophicating inorganic molecules present in wastewater. In order to test its biomass productivity, the PVUW12 strain was grown in a vertical-column photobioreactor using standard growth medium obtaining a maximal productivity of 0.3?g dry weight L^?1?d. When the same strain was grown in the photobioreactor filled with wastewater collected from the final step of the local urban purifier plant containing 18.8?mg?L^?1 nitrate, we observed complete nitrogen removal coupled with a biomass production of about 0.74?g dry weight L^?1 within 3 days. After 10?days, the recovered biomass was analyzed for triglyceride content which was found to be 9.3% of the dry biomass. However, when algal cells were left for additional 10?days in static conditions the triglyceride content increased to 28.8%. These data show that this Scenedesmus strain can be used for wastewater bioremediation producing a biomass suitable for energy production.     

Effect of different media on exopolysaccharide and biomass production by the green microalga Botryococcus braunii

Botryococcus braunii is a colonial green microalga with recognized potential to synthesize lipids and hydrocarbons for biofuel production. Besides this ability, this microalga also produces exopolysaccharides (EPS). Nevertheless, there are few reports about their biotechnological aspects and industrial applications. In this study, the effect of the nutritional conditions was examined by using two different culture media (BG11 and D medium). To our knowledge, the latter has not been reported before for culturing B. braunii. After 49 days of incubation, the final production of EPS was found to be statistically higher (P < 0.05) in the D medium (0.549?±?0.044 g L^?1) than in BG11 (0.336?±?0.009 g L^?1). On the contrary, the biomass production was found to be higher in BG11 (1.019?±?0.051 g L^?1) than in the D medium (0.953?±?0.056 g L^?1). However, this difference was not statistically significant. The difference in salinity and nitrogen concentration between both media is suggested as the main factor involved in the EPS and biomass results. FTIR spectra of B. braunii EPS from both media revealed presence of uronic acids and absence of amino and sulfate groups. Despite the similarity between both spectra, there were some different signals (at 1,921.52 and 720.60 cm^?1) which may mean a difference in glycosyl composition.     

Non-destructive hydrocarbon extraction from Botryococcus braunii BOT-22 (race B)

There is worldwide interest in developing algal biofuel. One main reason for the lack of success so far in producing a sustainable transport fuel from microalgae is the high cost of biomass processing, especially dewatering and oil extraction. There is also a significant cost involved in the energy content of the nutrient fertilisers required for biomass production. Non-destructive oil extraction or “milking” from algae biomass has the potential to bypass all of these hurdles. Using a “milking” strategy means that there would be no need for (a) biomass dewatering, (b) breaking cells for oil extraction and (c) addition of nutrients to the culture, resulting in a significant reduction in energy and fertiliser cost involved in production of biofuel from algae. We make use of the natural tendency of Botryococcus to produce external hydrocarbon in the extracellular matrix. In current study, we showed that external hydrocarbon from Botryococcus braunii BOT-22 can be non-destructively extracted using n-heptane (optimum contact time with n-heptane?=?20 min). We were able to recover almost the entire de novo-produced external hydrocarbons at 5- and 11-day intervals when the culture was maintained with or without 1 % CO₂ addition, respectively. This repeated non-destructive extraction of external hydrocarbon of B. braunii was possible for up to 70 days when 1 % CO₂ was supplied to the culture. When CO₂ was limited, a 70 % lower external hydrocarbon productivity was achieved using the same process. Although the productivity of external hydrocarbon of 9.33 mg L^?1 day^?1 of the “milked” culture is low in these un-optimised cultures, it was 1.3?±?0.2-fold higher compared with that of a conventional semicontinuous culture, showing the potential of this method.     

Lipid and total fatty acid productivity in photoautotrophic fresh water microalgae: screening studies towards biodiesel production

Microalgae are considered as a promising feedstock for biomass production. The selection of the most suitable species is based on several key parameters such as lipid and fatty acid productivity. In the present study, the growth of different microalgae strains was examined in freshwater media for photoautotrophs suited for large-scale applications to identify the most suitable medium for each species. In the optimal medium, Scenedesmus obliquus showed the highest biomass productivity measured as increase of cell dry weight (0.25 g cellu dry weight (CDW) L^?1 day^?1), while Botryococcus braunii showed the highest lipid and total fatty acid content (430 and 270 mg g^?1 CDW, respectively) among the tested species. Regarding lipid and total fatty acid productivity, S. obliquus was the most lipid and total fatty acid productive strain with 41 and 18 mg L^?1 day^?1 during the exponential phase, respectively. Additionally, the proportion of saturated and monounsaturated fatty acids increased with duration of the incubation in S. obliquus, while polyunsaturated fatty acids decreased. These results nominate S. obliquus as a promising microalga in order to serve as a feedstock for renewable energy production.     

Growth and photosynthetic activity of <Emphasis Type="Italic">Botryococcus braunii</Emphasis> biofilms

Botryococcus braunii is a green microalga capable of producing large amounts of external long-chain hydrocarbons suitable as a source of biofuel. There have been several studies indicating that cultures of B. braunii can reduce the energy and water requirement for mass biofuel production, especially if non-destructive extraction methods for milking hydrocarbons are used. Growing microalgae as a raw material for biofuel using conventional liquid-based cultivation (i.e., raceway ponds) has yet to be shown to be economically successful. An alternative solid growth (biofilm) cultivation method can markedly reduce the energy requirements and costs associated with the harvesting and dewatering processes. We evaluated the growth of biofilms of several strains of B. braunii (from races A, B, L and S) and found that three of the four tested races successfully grew to stationary phase in 10 weeks with no contamination. Among all races, B. braunii BOT22 (race B) reached the highest biomass and lipid yields (3.80 mg dry weight cm^?2 day^?1 and 1.11 mg dry weight cm^?2). Irrespective of the race, almost all photosynthetic parameters (F _V /F ₀ , PI_ABS and the OJIP curve) showed that the biofilm cultures were more stressed during lag and stationary phases than in logarithmic phase. We also studied the Botryococcus biofilm profiles using confocal microscopy and found that this method is suitable for estimating the overall biomass yield when compared with gravimetric measurement. In conclusion, the growth characteristics (biomass and lipid) and photosynthetic performance of all races indicated that B. braunii BOT22 is the most promising strain for biofilm cultivation.     

Outdoor pilot-scale production of Botryococcus braunii in panel reactors

In this paper, the outdoor production of Botryococcus braunii in pilot-scale panel reactors (0.4?m³) is studied under uncontrolled conditions at a location close to the Atacama Desert (Chile). Discontinuous experiments were performed on different dates to determine the feasibility of the culture and the influence of environmental conditions on the system yield. Data showed that solar radiation is a major parameter in determining system yield, the average irradiance inside the culture determining both the growth rate and biomass productivity. A maximum specific growth rate of 0.09?day^?1 and biomass productivity of 0.02?g?L^?1?day^?1 (dry weight) were measured in discontinuous mode, at an average irradiance of 60?μE?m^?2?s^?1. With respect to lipids, a productivity of 2.5?mg?L^?1?day^?1 was obtained under favourable growth conditions; no accumulation of lipids at the stationary phase was observed. To confirm this behaviour, a semicontinuous culture was performed at 0.04?day^?1 in a larger reactor (1?m³). In this experiment, the biomass concentration and productivity was 0.3?g?L^?1 and 0.015?g?L^?1?day^?1, respectively. The lipid content and productivity was 15.6% and 2.4?mg?L^?1?day^?1, respectively, the mean average irradiance inside the reactor being 60?μmol photons?m^?2?s^?1. The light path of the reactor determines the light availability, thus determining also the biomass concentration and productivity of the reactor once the dilution rate is fixed. Experimentally, biomass productivity of 0.015?g?L^?1?day^?1 was determined for a light path of 0.15?m, but this can be increased by more than three times for a light path of 0.1?m. These data confirm that this alga can be produced outdoors in a secure form, the culture yield improving when optimal conditions are applied, the data reported here establishing the starting point for the development of the process.     

Effect of mixed carbon substrate on exopolysaccharide production of cyanobacterium Nostoc flagelliforme in mixotrophic cultures

The effects of organic carbon sources on cell growth and exopolysaccharide (EPS) production of dissociated Nostoc flagelliforme cells under mixotrophic batch culture were investigated. After 7?days of cultivation, glycerol, acetate, sucrose, and glucose increased the final cell density and final EPS concentrations, and mixotrophic growth achieved higher biomass concentrations. The increase in cell growth was particularly high when glucose was added as the sole carbon source. On the other hand, EPS production per dry cell weight was significantly enhanced by adding acetate. For more effective EPS production, the effects of the mixture of glucose and acetate were investigated. Increasing the ratio of glucose to acetate resulted in higher growth rate with BG-11 medium and higher EPS productivity with BG-11₀ medium (without NaNO₃). When the medium was supplemented with a mixture of glucose (4.0?g?L^?1) and acetate (2.0?g?L^?1), 1.79?g?L^?1 biomass with BG-11 medium and 879.6?mg?L^?1 of EPS production with BG-11₀ medium were achieved. Adopting this optimal ratio of glucose to acetate established in flask culture, the culture was also conducted in a 20-L photobioreactor with BG-11 medium for 7?days. A maximum biomass of 2.32?g?L^?1 was achieved, and the EPS production was 634.6?mg?L^?1.     

Growth characteristics of Botryococcus braunii 765 under high CO2 concentration in photobioreactor

To understand the potential of cultivating Botryococcus braunii with flue gas (normally containing high CO₂) for biofuel production, growth characteristics of B. braunii 765 with 2-20% CO₂ aeration were investigated. The results showed that the strain could grow well without any obvious inhibition under all tested CO₂ concentrations with an aeration rate of 0.2 vvm, even without any culture pH adjustment (ranged from 6.0 to 8.0). The maximum biomass among all conditions was 2.31 g L⁻¹ on 25th day at 20% CO₂. Hydrocarbon content and algal colony size increased with the increase of CO₂ concentration. A negative correlation between algal biomass and culture total phosphorus was observed (from −0.828 to −0.911, P < 0.01). Additionally, 2% sodium hypochlorite solution was used for photobioreactor sterilization to cultivate B. braunii.     

Mixotrophic and photoautotrophic cultivation of 14 microalgae isolates from Saskatchewan, Canada: potential applications for wastewater remediation for biofuel production

Northern regions are generally viewed as unsuitable for microalgal biofuel production due to unfavorable climate and solar insolation levels. However, these conditions can potentially be mitigated by coupling microalgal cultivation to industrial processes such as wastewater treatment. In this study, we have examined the biomass and lipid productivity characteristics of 14 microalgae isolates (Chlorophyta) from the Canadian province of Saskatchewan. Under both photoautotrophic and mixotrophic cultivation, a distinct linear trend was observed between biomass and lipid productivities in the 14 SK isolates. The most productive strain under cultivation in TAP media was Scenedesmus sp.-AMDD which displayed rates of biomass and fatty acid productivities of 80 and 30.7?mg?L^?1?day^?1, respectively. The most productive strain in B3NV media was Chlamydomonas debaryana-AMLs1b which displayed rates of biomass and fatty acid productivities of 51.7 and 5.9?mg?L^?1?day^?1, respectively. In 11 of the isolates tested, secondary municipal wastewater (MCWW) supported rates of biomass productivity between 21 and 33?mg?L^?1?day^?1 with Scenedesmus sp.-AMDD being the most productive. Three strains, Chlamydomonas debaryana-AMB1, Chlorella sorokiniana-RBD8 and Micractinium sp.-RB1b, showed large increases in biomass productivity when cultivated mixotrophically in MCWW supplemented with glycerol. High relative oleic acid content was detected in 10 of the 14 isolates when grown mixotrophically in media supplemented with acetate. There was no detectable effect on the fatty acid profiles in cells cultivated mixotrophically in glycerol-supplemented MCWW. These data indicate that biomass and lipid productivities are boosted by mixotrophic cultivation. Exploiting this response in municipal wastewater is a promising strategy for the production of environmentally sustainable biofuels.     

Biomass production from the green algae Chlorella vulgaris and Ankistrodesmus braunii cultured heterotrophically

Summary Ankistrodesmus braunii and Chlorella vulgaris were cultured heterotrophically under various operating conditions. The maximum rate of biomass production was 900 and 900 mg L^-1 d^-1 by C. vulgaris and 1000 and 700 mg L^-1 d^-1 by A. braunii in the light and dark, respectively. This indicates that these algae could produce in excess of 1530 dry weight tonnes ha^-1 y^-1 which is 10–20 times higher than the maximum production levels in the literature.     

Scenedesmus sp. NJ-1 isolated from Antarctica: a suitable renewable lipid source for biodiesel production

Microalgal lipids are promising alternative feedstocks for biodiesel production. Scenedesmus sp. NJ-1, an oil-rich freshwater microalga isolated from Antarctica, was identified to be a suitable candidate to produce biodiesel in this study. This strain could grow at temperatures ranging from 4 to 35?°C. With regular decrease in nitrate concentration in the medium, large quantities of triacylglycerols accumulated under batch culture conditions detected by thin layer chromatography and BODIPY 505/515 fluorescent staining. Scenedesmus sp. NJ-1 achieved the average biomass productivity of 0.105?g?l^?1?d^?1 (dry weight) and nearly the highest lipid content (35?% of dry cell weight) was reached at day 28 in the batch culture. Neutral lipids accounted for 78?% of total lipids, and C18:1 (n-9), C16:0 were the major fatty acids in total lipids, composing 37 and 20?% of total fatty acids of Scenedesmus sp. NJ-1 grown for 36?days, respectively. These results suggested that Scenedesmus sp. NJ-1 was a good source of microalgal oils for biodiesel production.     

Elicitor mediated enhancement of wedelolactone in cell suspension culture of <Emphasis Type="Italic">Eclipta alba</Emphasis> (L.) Hassk

The present research focused on enhancing the production of wedelolactone through cell suspension culture (CSC) in Eclipta alba (L.) Hassk. With an aim of attaining a sustainable CSC, various plant growth regulators, elicitors and agitation speed were examined. Nodal segments of in vitro propagated plantlets induced the maximum percentage (93.47?±?0.61%) of callus inoculated on Murashige and Skoog (MS) medium fortified with picloram (2 mg L^?1). The growth kinetics of CSC exhibited a sigmoid pattern with a lag phase (0–6 days), a log phase (6–18 days), a stationary phase (18–24 days) and then death phase thereafter. The highest biomass accumulation in CSC with 7.09?±?0.06 g 50 mL^?1 fresh weight, 1.52?±?0.02 g 50 mL^?1 dry cell weight, 1.34?±?0.01?×?10⁶ cell mL^?1 total cell count and 57.00?±?0.58% packed cell volume was obtained in the liquid MS medium supplemented with 1.5 mg L^?1 picloram plus 0.5 mg L^?1 kinetin at 120 rpm. High performance thin layer chromatography confirmed that yeast extract (biotic elicitor) at 150 mg L^?1 accumulated more CSC biomass with 1.22-fold increase in wedelolactone (288.97?±?1.94 µg g^?1 dry weight) content in comparison to the non-elicited CSC (237.78?±?0.04 µg g^?1 dry weight) after 120 h of incubation. Contrastingly, methyl jasmonate (abiotic elicitor) did not alter the biomass but increased the wedelolactone content (259.32?±?1.06 µg g^?1 dry weight) to an extent of 1.09-fold at 100 µM. Complete plantlet regeneration from CSC was possible on MS medium containing N⁶-benzyladenine (0.75 mg L^?1) and abscisic acid (0.5 mg L^?1). Thus, the establishment of protocol for CSC constitutes the bases for future biotechnological improvement studies in this crop.     

Effects of different nitrogen, phosphorus, and iron concentrations and salinity on lipid production in newly isolated strain of the tropical green microalga, Scenedesmus dimorphus KMITL

The fatty acid composition, the effect of different concentrations of nitrogen (16.5-344 mg ?L^?1), phosphorus (9–45 mg? L^?1), iron (9–45 mg? L^?1) and salinity levels (0–20 psu) on lipid production in the green microalga Scenedesmus dimorphus KMITL, a new strain isolated from a tropical country, Thailand, were studied. The alga was isolated from a freshwater fish pond, and cultured in Chlorella medium by varying one parameter at a time. The main fatty acid composition of this strain was C16–C18 (97.52 %) fatty acids. A high lipid content was observed in conditions of 16.5 mg? L^?1-N, or 22 mg ?L^?1-P, or 45 mg ?L^?1-Fe, or 5 psu salinity, which accumulated lipids to 20.3?±?0.4, 19.4?±?0.2, 24.7?±?0.5, and 14.3?±?0.2 % of algal biomass, respectively. Increasing lipid content and lipid productivity was noted when the alga was cultured under high iron concentration and high salinity, as well as under reduced phosphorus conditions, whereas nitrogen limitation only resulted in an increased lipid content.     

Herbicide-resistant mutants of Botryococcus braunii race B (strain BOT-22)

The freshwater green alga Botryococcus braunii produces long-chain hydrocarbon oil in large quantities and secretes these from the cells. To exploit B. braunii as a source of next-generation biofuel, development of cost-effective cultivation systems are required. One of the most cost-effective methods for large-scale production is to simply grow B. braunii in open ponds. However, trials to cultivate B. braunii in open ponds often fail due to thriving of other green algal and cyanobacterial species because of the relatively slow growth of B. braunii. We previously demonstrated that herbicides are effective in control of contaminating algae. In order to use herbicide-assisted cultivation systems, we generated herbicide-resistant mutants of an oil-rich strain of B. braunii race B (strain BOT-22) by ethyl methanesulfonate mutagenesis. We isolated 44 glufosinate-resistant and 21 methyl viologen-resistant mutant lines. Some of these mutant lines exhibited vigorous growth and oil production in herbicide-containing liquid media, suggesting that they can be directly used in herbicide-containing cultivation systems.     

Comparison of biomass production and total lipid content of freshwater green microalgae cultivated under various culture conditions

The growth and total lipid content of four green microalgae (Chlorella sp., Chlorella vulgaris CCAP211/11B, Botryococcus braunii FC124 and Scenedesmus obliquus R8) were investigated under different culture conditions. Among the various carbon sources tested, glucose produced the largest biomass or microalgae grown heterotrophically. It was found that 1 % (w/v) glucose was actively utilized by Chlorella sp., C. vulgaris CCAP211/11B and B. braunii FC124, whereas S. obliquus R8 preferred 2 % (w/v) glucose. No significant difference in biomass production was noted between heterotrophic and mixotrophic (heterotrophic with light illumination/exposure) growth conditions, however, less production was observed for autotrophic cultivation. Total lipid content in cells increased by approximately two-fold under mixotrophic cultivation with respect to heterotrophic and autotrophic cultivation. In addition, light intensity had an impact on microalgal growth and total lipid content. The highest total lipid content was observed at 100 μmol m^?2s^?1 for Chlorella sp. (22.5 %) and S. obliquus R8 (23.7 %) and 80 μmol m^?2s^?1 for C. vulgaris CCAP211/11B (20.1 %) and B. braunii FC124 (34.9 %).     

Improved Biomass and Hydrocarbon Productivity of Botryococcus braunii by Periodic Ultrasound Stimulation

Ultrasonic treatment was firstly found to accelerate both biomass and hydrocarbon productivities of Botryococcus braunii algal cells cultured in the shake flasks. The most effective sonication strategy was to subject the cells to three 5-min ultrasonic treatments at a 4-day interval using a fixed frequency of 40 kHz and power of 240 W, and the ultrasound-treated algal cells showed the highest biomass productivity of 0.043 g L^?1 day^?1 and the highest hydrocarbon productivity of 13.1 mg L^?1 day^?1 among all ultrasound treatments tested. The improved productivity was proved to be mainly due to the enhancement of both endogenous indole-3-acetic acid (IAA) biosynthesis and membrane permeability in the ultrasound-stimulated algal cells. The efficient ultrasonic stimulation strategy also showed good performance for the algal culture in a 2-L airlift bioreactor. Together, these results not only illustrate the immense potential for an enhanced understanding on ultrasound-stimulated algal cells but also as provide a powerful process intensification method to improve the biomass and hydrocarbon productivity of B. braunii in practice.     

Magnetophoretic harvesting of freshwater microalgae using polypyrrole/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanocomposite and its reusability

A magnetophoretic harvesting agent, a polypyrrole/Fe₃O₄ magnetic nanocomposite, is proposed as a cost and energy efficient alternative to recover biomass of the microalgae Botryococcus braunii, Chlorella protothecoides, and Chlorella vulgaris from their culture media. The maximal recovery efficiency reached almost 99 % for B. braunii, 92.4 % for C. protothecoides, and 90.8 % for C. vulgaris. The maximum adsorption capacity (Q ₀) of the magnetic nanocomposite for B. braunii (63.49 mg dry biomass mg^?1 PPy/Fe₃O₄) was higher than that for C. protothecoides (43.91 mg dry biomass mg^?1 PPy/Fe₃O₄) and C. vulgaris (39.98 mg dry biomass mg^?1 PPy/Fe₃O₄). The highest harvesting efficiency for all the studied microalgae were at pH 10.0, and measurement of zeta-potential confirmed that the flocculation was induced by charge neutralization. This study showed that polypyrrole/Fe₃O₄ can be a promising flocculant due to its high efficacy, low dose requirements, short settling time, its integrity with cells, and with great potential for saving energy because of its recyclability.     

Screening and characterization of Isochrysis strains and optimization of culture conditions for docosahexaenoic acid production

Isochrysis is a genus of marine unicellular microalgae that produces docosahexaenoic acid (DHA, C22:6), a very long chain polyunsaturated fatty acid (PUFA) of significant health and nutritional value. Mass cultivation of Isochrysis for DHA production for human consumption has not been established due to disappointing low DHA productivity obtained from commonly used Isochrysis strains. In this study, 19 natural Isochrysis strains were screened for DHA yields and the results showed that the cellular DHA content ranged from 6.8 to 17.0 % of total fatty acids with the highest DHA content occurring in the exponential growth phase. Isochrysis galbana #153180 exhibited the greatest DHA production potential and was selected for further investigation. The effects of different light intensities, forms, and concentrations of nitrogen, phosphorus, and salinity on growth and DHA production of I. galbana #153180 were studied in a bubble column photobioreactor (PBR). Under favorable culture conditions, I. galbana #153180 contained DHA up to 17.5 % of total fatty acids or 1.7 % of cell dry weight. I. galbana #153180 was further tested in outdoor flat-plate PBRs varying in light path length, starting cell density (SCD), and culture mode (batch versus semicontinuous). When optimized, record high biomass and DHA productivity of I. galbana #153180 of 0.72 g L^?1?day^?1 and 13.6 mg?L^?1?day^?1, or 26.4 g?m^?2?day^?1 and 547.7 mg?m^?2?day^?1, respectively, were obtained, suggesting that I. galbana #153180 may be a desirable strain for commercial production of DHA.     

Inorganic carbon and pH effect on growth and lipid productivity of Tetraselmis suecica and Chlorella sp (Chlorophyta) grown outdoors in bag photobioreactors

There has been considerable interest in cultivation of green microalgae (Chlorophyta) as a source of lipid that can alternatively be converted to biodiesel. However, almost all mass cultures of algae are carbon-limited. Therefore, to reach a high biomass and oil productivities, the ideal selected microalgae will most likely need a source of inorganic carbon. Here, growth and lipid productivities of Tetraselmis suecica CS-187 and Chlorella sp were tested under various ranges of pH and different sources of inorganic carbon (untreated flue gas from coal-fired power plant, pure industrial CO₂, pH-adjusted using HCl and sodium bicarbonate). Biomass and lipid productivities were highest at pH 7.5 (320?±?29.9 mg biomass L^?1 day^?1and 92?±?13.1 mg lipid L^?1 day^?1) and pH 7 (407?±?5.5 mg biomass L^?1 day^?1 and 99?±?17.2 mg lipid L^?1 day^?1) for T. suecica CS-187 and Chlorella sp, respectively. In general, biomass and lipid productivities were pH 7.5?>?pH 7?>?pH 8?>?pH 6.5 and pH 7?>?pH 7.5?=?pH 8?>?pH 6.5?>?pH 6?>?pH 5.5 for T. suecica CS-187 and Chlorella sp, respectively. The effect of various inorganic carbon on growth and productivities of T. suecica (regulated at pH?=?7.5) and Chlorella sp (regulated at pH?=?7) grown in bag photobioreactors was also examined outdoor at the International Power Hazelwood, Gippsland, Victoria, Australia. The highest biomass and lipid productivities of T. suecica (51.45?±?2.67 mg biomass L^?1 day^?1 and 14.8?±?2.46 mg lipid L^?1 day^?1) and Chlorella sp (60.00?±?2.4 mg biomass L^?1 day^?1 and 13.70?±?1.35 mg lipid L^?1 day^?1) were achieved when grown using CO₂ as inorganic carbon source. No significant differences were found between CO₂ and flue gas biomass and lipid productivities. While grown using CO₂ and flue gas, biomass productivities were 10, 13 and 18 %, and 7, 14 and 19 % higher than NaHCO₃, HCl and unregulated pH for T. suecica and Chlorella sp, respectively. Addition of inorganic carbon increased specific growth rate and lipid content but reduced biomass yield and cell weight of T. suecica. Addition of inorganic carbon increased yield but did not change specific growth rate, cell weight or content of the cell weight of Chlorella sp. Both strains showed significantly higher maximum quantum yield (F_v/F_m) when grown under optimum pH.