The existence of multiple conformers of interleukin-21 directs engineering of a superpotent analogue

The high resolution three-dimensional structure of human interleukin (hIL)-21 has been resolved by heteronuclear NMR spectroscopy. Overall, the hIL-21 structure is dominated by a well defined central four-helical bundle, arranged in an up-up-down-down topology, as observed for other cytokines. A segment of the hIL-21 molecule that includes the third helical segment, helix C, is observed to exist in two distinct and interchangeable states. In one conformer, the helix C segment is presented in a regular, alpha-helical conformation, whereas in the other conformer, this segment is largely disordered. A structure-based sequence alignment of hIL-21 with receptor complexes of the related cytokines, interleukin-2 and -4, implied that this particular segment is involved in receptor binding. An hIL-21 analog was designed to stabilize the region around helix C through the introduction of a segment grafted from hIL-4. This novel hIL-21 analog was demonstrated to exhibit a 10-fold increase in potency in a cellular assay.     

Structural investigation of helices II, III, and IV of B. megaterium 5S ribosomal RNA by molecular dynamics calculations.

The structures of the helices II-III region and the helix IV region of B. megaterium 5S rRNA have been examined by means of energy minimization and molecular dynamics calculations. Calculated distances between neighboring hydrogen-bonded imino protons in helices II, III, and IV were between 3.5 and 4.5 A. The overall axis for the helices II-III region is warped rather than straight. Formation of additional Watson-Crick base pairs in loop B and loop C was not evident from the atomic positions calculated by molecular dynamics. Bases in loop C are well stacked, showing no significant change during dynamics. Bulge migration in helix III does not seem to be possible; the helices II-III region prefers one conformation. Helix II is more stable than helix III. Five base pairs in helix IV were sufficiently stable to establish that helix IV is terminated by a hairpin loop of three nucleotides. U87 protrudes from loop D. Structures of the helices II-III segment and the helix IV segment of B. megaterium 5S rRNA obtained by molecular dynamics were generally consistent with the solution structure inferred from high-field proton nmr spectroscopy.     

Peptide design: Crystal structure of a helical peptide module attached to a potentially nonhelical amino terminal segment

The peptide Boc-Gly-Dpg-Gly-Val-Ala-Leu-Aib-Val-Ala-Leu-OMe has been designed to examine the structural consequences of placing a short segment with a low helix propensity at the amino terminus of a helical heptapeptide module. The Gly-Dpg-Gly segment is a potential connecting element in the synthetic construction of a helix-linker-helix motif. Crystal parameters for the peptide are P2₁, a = 8.651(3) Å, b = 46.826(13) Å, c = 16.245 Å, β = 90.13(3)*, Z = 4; 2 independent molecules/asymmetric unit. The structure reveals almost identical conformations for the two independent molecules. The backbone is completely helical for residues 2–9, with one 4 → 1 hydrogen bond and six 5 → 1 hydrogen bonds. The α,α-di-n-propylglycine residue adopts a helical conformation. Gly(1) adopts an extended conformation resulting in a nonhelical N-terminus, with the Boc group swinging away from the helix. The lateral association of helices in the b axis direction is unusual in that the helix axes are directed up or down (parallel or antiparallel) by pairs: ↓↓↑↑↓↓, etc. © 1996 John Wiley & Sons, Inc.     

Conformational calculations on the Ala14-Pro27 LC1 segment of rabbit skeletal myosin

In order to define the conformational characteristics of a singular Ala14-Pro27 segment in myosin LC1, conformational calculations were performed using the Simplex algorithm of Nelder and Mead (Computer J. 7 (1965) 308-313) in the ACME program proposed by Tournarie (J. Appl. Cryst. 6 (1973) 309-346). The (Ala-Pro) n = 1 unit was assigned a given conformation x; the conformation energy was then minimized for n = 1 to n = 7 by adjusting structural parameters (angle values). Similarly, 13 different possible conformations were optimized and compared, showing that a (beta 2R)7 conformation is favored by about 20 kcal per mol over the next most probable conformation (C7R)7. In the beta 2R conformation, the (Ala-Pro)7 segment is a wide helix, 15 A in length and 8.65 A in diameter, while the C7R conformation results in a semi-extended structure of 25 A long, with an approximate diameter of 6 A. These characteristics are in agreement with available experimental data and putative functions of the LC1 N-terminus.     

On alpha-helices terminated by glycine. 2. Recognition by sequence patterns

Consensus sequence patterns were constructed to describe helix ends with a characteristic conformation caused by specific three-center hydrogen bonds. This special type of hydrogen bond pattern comprises about one third of all helices and mostly contains glycine with a positive torsion angle phi at the helix ends. After a simple clustering procedure 6 resulting consensus sequence patterns were able to identify 501 out of 575 helix ends in the Brookhaven Protein Data Bank, showing the above-mentioned features. The patterns did not detect any false segment, but numerous sequence segments not identified by structural criteria were recognized. It is likely that they are indeed helices terminated by glycine with a positive torsion angle phi.     

Molecular dynamics studies of side chain effect on the beta-1,3-D-glucan triple helix in aqueous solution

beta-1,3-D-glucans have been isolated from fungi as right-handed 6(1) triple helices. They are categorized by the side chains bound to the main triple helix through beta-(1-->6)-D-glycosyl linkage. Indeed, since a glucose-based side chain is water soluble, the presence and frequency of glucose-based side chains give rise to significant variation in the physical properties of the glucan family. Curdlan has no side chains and self-assembles to form an water-insoluble triple helical structure, while schizophyllan, which has a 1,6-D-glucose side chain on every third glucose unit along the main chain, is completely water soluble. A thermal fluctuation in the optical rotatory dispersion is observed for the side chain, indicating probable co-operative interaction between the side chains and water molecules. This paper documents molecular dynamics simulations in aqueous solution for three models of the beta-1,3-D-glucan series: curdlan (no side chain), schizophyllan (a beta-(1-->6)-D-glycosyl side-chain at every third position), and a hypothetical triple helix with a side chain at every sixth main-chain glucose unit. A decrease was observed in the helical pitch as the population of the side chain increased. Two types of hydrogen bonding via water molecules, the side chain/main chain and the side chain/side chain hydrogen bonding, play an important role in determination of the triple helix conformation. The formation of a one-dimensional cavity of diameter about 3.5 A was observed in the schizophyllan triple helix, while curdlan showed no such cavity. The side chain/side chain hydrogen bonding in schizophyllan and the hypothetical beta-1,3-D-glucan triple helix could cause the tilt of the main-chain glucose residues to the helix.     

Addition of side chain interactions to modified Lifson-Roig helix-coil theory: application to energetics of phenylalanine-methionine interactions.

We introduce here i, i + 3 and i, i + 4 side chain interactions into the modified Lifson-Roig helix-coil theory of Doig et al. (1994, Biochemistry 33:3396-3403). The helix/coil equilibrium is a function of initiation, propagation, capping, and side chain interaction parameters. If each of these parameters is known, the helix content of any isolated peptide can be predicted. The model considers every possible conformation of a peptide, is not limited to peptides with only a single helical segment, and has physically meaningful parameters. We apply the theory to measure the i, i + 4 interaction energies between Phe and Met side chains. Peptides with these residues spaced i, i + 4 are significantly more helical than controls where they are spaced i, i + 5. Application of the model yields delta G for the Phe-Met orientation to be -0.75 kcal.mol-1, whereas that for the Met-Phe orientation is -0.54 kcal.mol-1. These orientational preferences can be explained, in part, by rotamer preferences for the interacting side chains. We place Phe-Met i, i + 4 at the N-terminus, the C-terminus, and in the center of the host peptide. The model quantitatively predicts the observed helix contents using a single parameter for the side chain-side chain interaction energy. This result indicates that the model works well even when the interaction is at different locations in the helix.     

Crystal structure of the 2:1 complex between d(GAAGCTTC) and the anticancer drug actinomycin D.

The crystal structures of the 2:1 complex of the self-complementary DNA octamer d(GAAGCTTC) with actinomycin D has been determined at 3.0 A resolution. This is the first example of a crystal structure of a DNA-drug complex in which the drug intercalates into the middle of a relatively long DNA segment. The results finally confirmed the DNA-actinomycin intercalation model proposed by Sobell & co-workers in 1971. The DNA molecule adopts a severely distorted and slightly kinked B-DNA-like structure with an actinomycin D molecule intercalated in the middle sequence, GC. The two cyclic depsipeptides, which differ from each other in overall conformation, lie in the minor groove. The complex is further stabilized by forming base-peptide and chromophore-backbone hydrogen bonds. The DNA helix appears to be unwound by rotating one of the base-pairs at the intercalation site. This single base-pair unwinding motion generates a unique asymmetrically wound helix at the binding site of the drug, i.e. the helix is loosened at one end of the intercalation site and tightened at the other end. The large unwinding of the DNA by the drug intercalation is absorbed mostly in a few residues adjacent to the intercalation site. The asymmetrical twist of the DNA helix, the overall conformation of the two cyclic depsipeptides and their interaction mode with DNA are correlated to each other and rationally explained.     

Three-dimensional structures of bulge-containing DNA fragments.

The three-dimensional structure of a DNA tridecamer d(CGCAGAATTCGCG)2 containing bulged adenine bases was determined by single crystal X-ray diffraction methods, at 120 K, to 2.6 A resolution. The structure is a B-DNA type double helix with a single duplex in the asymmetric unit. One of the bulged adenine bases loops out from the double helix, while the other stacks in to it. This is in contrast to our preliminary finding, which indicated that both adenine bases were looped out. This revised model was confirmed by the use of a covalently bound heavy-atom derivative. The conformation of the looped-out bulge hardly disrupts base stacking interactions of the bases flanking it. This is achieved by the backbone making a "loop-the-loop" curve with the extra adenine flipping over with respect to the other nucleotides in the strand. The looped-out base intercalates into the stacked-in bulge site of a symmetrically related duplex. The looped-out and stacked-in bases form an A.A reversed Hoogsteen base-pair that stacks between the surrounding base-pairs, thus stabilizing both bulges. The double helix is frayed at one end with the two "melted" bases participating in intermolecular interactions. A related structure, of the same tridecamer, after soaking the crystals with proflavin, was determined to 3.2 A resolution. The main features of this B-DNA duplex are basically similar to the native tridecamer but differ in detail especially in the conformation of the bulged-out base. Accommodation of a large perturbation such as that described here with minimal disruption of the double helix shows both the flexibility and resiliency of the DNA molecule.     

The peptide-receptive transition state of MHC class I molecules: insight from structure and molecular dynamics

MHC class I (MHC-I) proteins of the adaptive immune system require antigenic peptides for maintenance of mature conformation and immune function via specific recognition by MHC-I-restricted CD8(+) T lymphocytes. New MHC-I molecules in the endoplasmic reticulum are held by chaperones in a peptide-receptive (PR) transition state pending release by tightly binding peptides. In this study, we show, by crystallographic, docking, and molecular dynamics methods, dramatic movement of a hinged unit containing a conserved 3(10) helix that flips from an exposed "open" position in the PR transition state to a "closed" position with buried hydrophobic side chains in the peptide-loaded mature molecule. Crystallography of hinged unit residues 46-53 of murine H-2L(d) MHC-I H chain, complexed with mAb 64-3-7, demonstrates solvent exposure of these residues in the PR conformation. Docking and molecular dynamics predict how this segment moves to help form the A and B pockets crucial for the tight peptide binding needed for stability of the mature peptide-loaded conformation, chaperone dissociation, and Ag presentation.     

The conformation of the mucopolysaccharides. Hyaluronates

X-ray-diffraction patterns of hyaluronate fibres from a variety of sources were obtained. Sodium hyaluronate gives well-defined patterns which index on a hexagonal unit cell with dimensions a=1.17+/-nm and a fibre repeat-distance of 2.85+/-0.03nm. A further form of sodium hyaluronate is produced by annealing at 60 degrees C in 75% relative humidity. This stable state indexes on a hexagonal unit cell of unchanged fibre repeat-distance but with a=1.87nm. The chain conformation is a threefold helix. Analysis of these diffraction patterns led to two tentative structures for sodium hyaluronate, involving different packing of the polysaccharide chains. The significance of side-chain interaction is discussed. Hyaluronic acid produces an X-ray pattern different from that obtained with the sodium salt. The fibre repeat-distance is 1.96+/-0.02nm and the unit cell appears to be monoclinic. The chain conformation is a twofold helix and conformational change between free acid and monovalent salt is discussed. These findings, together with model-building experiments, are interpreted as indicating a highly ordered structure, and the physical properties of hyaluronate solutions with regard to molecular shape and polyelectrolyte behaviour are rationalized.     

An unusual C-H...O hydrogen bond mediated reversal of polypeptide chain direction in a synthetic peptide helix

An unusual C-terminal conformation has been detected in a synthetic decapeptide designed to analyze the stereochemistry of helix termination in polypeptides. The crystal structure of the decapeptide Boc-Leu-Aib-Val-Ala-Leu-Aib-Val-(D)Ala-(D)Leu-Aib-OMe reveals a helical segment spanning residues 1-7 and helix termination by formation of a Schellman motif, generated by (D)Ala(8) adopting the left-handed helical (alpha(L)) conformation. The extended conformation at (D)Leu(9) results in a compact folded structure, stabilized by a potentially strong C-H. O hydrogen bond between Ala(4) C(alpha)H and (D)Leu(9) CO. The parameters for C-H. O interaction are Ala(4) C(alpha)H. O=C (D)Leu(9) distance 3.27 A, C(alpha)-H. O angle 176 degrees, and O. H(alpha) distance 2.29 A. This structure suggests that insertion of contiguous D-residues may provide a handle for the generation of designed structures containing more than one helical segment folded in a compact manner.     

Solution structural studies on human erythrocyte alpha-spectrin tetramerization site

We have determined the solution NMR structure of a recombinant peptide that consists of the first 156 residues of erythroid alpha-spectrin. The first 20 residues preceding the first helix (helix C') are in a disordered conformation. The subsequent three helices (helices A1, B1, and C1) form a triple helical bundle structural domain that is similar, but not identical, to previously published structures for spectrin from Drosophila and chicken brain. Paramagnetic spin label-induced NMR resonance broadening shows that helix C', the partial domain involved in alpha- and beta-spectrin association, exhibits little interaction with the structural domain. Surprisingly, helix C' is connected to helix A1 of the structural domain by a segment of 7 residues (the junction region) that exhibits a flexible disordered conformation, in contrast to the predicted rigid helical structure. We suggest that the flexibility of this particular junction region may play an important role in modulating the association affinity of alpha- and beta-spectrin at the tetramerization site of different isoforms, such as erythroid spectrin and brain spectrin. These findings may provide insight for explaining various physiological and pathological conditions that are a consequence of varying alpha- and beta-subunit self-association affinities in their formation of the various spectrin tetramers.     

Analysis of transmembrane segment 10 of the Glut1 glucose transporter by cysteine-scanning mutagenesis and substituted cysteine accessibility.

The Glut1 glucose transporter has been proposed to form an aqueous sugar translocation pathway through the lipid bilayer via the clustering of several transmembrane helices (Mueckler, M., Caruso, C., Baldwin, S. A., Panico, M., Blench, I., Morris, H. R., Allard, W. J., Lienhard, G. E., and Lodish, H. F. (1985) Science 229, 941-945). The participation of transmembrane helix 10 in the formation of this putative aqueous tunnel was tested using cysteine-scanning mutagenesis in conjunction with the membrane-impermeant, sulfhydryl-specific reagent, p-chloromercuribenzenesulfonate (pCMBS). A series of 21 mutants was created from a fully functional, cysteine-less, parental Glut1 molecule by changing each residue within putative transmembrane segment 10 to cysteine. Each mutant was then expressed in Xenopus oocytes, and its plasma membrane content, 2-deoxyglucose uptake activity, and sensitivity to pCMBS were measured. Helix 10 exhibited a highly distinctive reaction profile to scanning mutagenesis whereby cysteine substitution at residues within the cytoplasmic N-terminal half of the helix tended to increase specific transport activity, whereas substitution at residues within the exoplasmic C-terminal half of the helix tended to decrease specific transport activity. Four residues within helix 10 were clearly accessible to pCMBS as judged by inhibition or stimulation of transport activity. All four of these residues were clustered along one face of a putative alpha-helix. These results combined with previously published data suggest that transmembrane segment 10 of Glut1 forms part of the sugar permeation pathway. Two-dimensional models for the conformation of the 12 transmembrane helices and the exofacial glucose-binding site of Glut1 are proposed that are consistent with existing experimental data.     

Probing the effect of side chains on the conformation and stability of helical peptides via isotope-edited infrared spectroscopy

The mechanism of helix stabilization or destabilization by different amino acids has been the subject of several experimental and theoretical studies; these studies suggest that large or bulky side chains may modulate helix stability by altering the hydration of the helix backbone. In this paper, we report a spectroscopic study to determine the effect of alanine to leucine substitutions on the conformation and solvation of specific segments of a model helical peptide. A 25-residue, alanine-rich, helical peptide [Ac-(AAAAK)(4)-AAAAY-NH(2) (AKA)] and its two leucine variants [Ac-LLLLK-(AAAAK)(3)-AAAAY-NH(2) (LKA) and Ac-(AAAAK)(4)-LLLLY-NH(2) (AKL)] were characterized by infrared (IR) and electronic circular dichroism (ECD) spectroscopies. Introduction of (13)C isotopes into specific, consecutive, backbone carbonyls for certain blocks of each of the peptides mentioned above allows the IR spectra to be interpreted in terms of the conformation and solvation of specific residues within the helix. These isotope-edited IR spectra of the leucine peptides do not show evidence of a decrease in the degree of backbone solvation compared to the alanines, but suggest that the peptide may adopt a distorted conformation to accommodate the larger leucine side chains at the N-terminus. These experiments demonstrate the power of isotope-edited IR in dissecting subtle changes in helix conformation at the residue level.     

The T<-->R structural transition of insulin; pathways suggested by targeted energy minimization.

The transition of insulin between its crystallographically defined states T and R is connected with considerable change even of backbone structure: the N-terminal B chain (residues B1-B8) refolds from extended conformation in T into helical in R, and vice versa. Although hitherto observed only in hexamers the transition of the monomer was adequate for developing and testing the method of 'targeted energy minimization' (TEM), capable of coping with conformational changes of such extent at moderate computational expenditure. The simulation is performed in a predetermined number of steps consisting of two atomic displacements each, one by force in the direction of the target structure, the second by energy minimization releasing the constraint caused in the first. The transition pathway is represented by the string of energy minimized transient structures. Due to the directedness of the algorithm the simulated pathway for R-->T is not the reversal of that for T-->R. It is, therefore, not pretended that the minimum energy pathway was identified. In the T-->R direction the N-terminal B chain first swivels while remaining largely stretched and then winds up extending the pre-existing helix B9-B19. The A chain advances into the space abandoned and withdraws from it in the R-->T simulation. In the latter the extended helix first kinks at B8/B9, and then the B1-B8 segment is unwound and stretched. The helical H-bonds of that segment are formed late in T-->R and are maintained during almost half of R-->T. The AN helix is less stable and more involved in the transitions than helix AC.(ABSTRACT TRUNCATED AT 250 WORDS)     

Synthetic peptide model of an essential region of an aminoacyl-tRNA synthetase

A 40 amino acid sequence of the unsolved structure of Escherichia coli alanine-tRNA synthetase is essential for tRNA binding and encodes an immunological determinant that cross-reacts with antibodies raised against a eukaryote (insect Bombyx mori) alanine enzyme. The secondary structure of this sequence is predicted to be an amphiphilic alpha-helix that includes one aspartyl and eight glutamyl side chain carboxyl groups. The antibody reactivity and the conformation of a synthetic peptide model of this region (Glu346 to Ser385) were investigated. In addition, double Arg----Gln and Leu----Ala substitutions were separately placed in the enzyme on the hydrophilic and hydrophobic face, respectively, of the predicted helix. These mutations conserve the polar/nonpolar character of each face and retain the potential for helix formation. Circular dichroism spectra of the synthetic peptide model demonstrate the potential for amphiphilic helix formation for the segment from Glu346 to Ser385. The behavior of the mutations in the enzyme, together with earlier data and immunological assays presented here, suggests that one face of the putative helix is an antigenic region of the surface of the enzyme where it contributes to the interaction with alanine tRNA and that the specific sequence of the helix is an important determinant of enzyme stability.     

Constructing optimal backbone segments for joining fixed DNA base pairs.

A method is presented to link a sequence of space-fixed base pairs by the sugar-phosphate segments of single nucleotides and to evaluate the effects in the backbone caused by this positioning of the bases. The entire computational unit comprises several nucleotides that are energy-minimized, subject to constraints imposed by the sugar-phosphate backbone segments being anchored to space-fixed base pairs. The minimization schemes are based on two stages, a conjugate gradient method followed by a Newton-Raphson algorithm. Because our purpose is to examine the response, or relaxation, of an artificially stressed backbone, it is essential to be able to obtain, as closely as possible, a lowest minimum energy conformation of the backbone segment in conformational space. For this purpose, an algorithm is developed that leads to the generation of an assembly of many local energy minima. From these sets of local minima, one conformation corresponding to the one with the lowest minimum is then selected and designated to represent the backbone segment at its minimum. The effective electrostatic potential of mean force is expressed in terms of adjustable parameters that incorporate solvent screening action in the Coulombic interactions between charged backbone atoms; these parameters are adjusted to obtain the best fit of the nearest-neighbor phosphorous atoms in an x-ray structure.     

Analysis of the conformation of the 3' major domain of Escherichia coli16S ribosomal RNA using site-directed photoaffinity crosslinking.

The 3' major domain of Escherichia coli 16S rRNA, which occupies the head of the small ribosomal subunit, is involved in several functions of the ribosome. We have used a site-specific crosslinking procedure to gain further insights into the higher-order structure of this domain. Circularly permuted RNAs were used to introduce an azidophenacyl group at specific positions within the 3' major domain. Crosslinks were generated in a high-ionic strength buffer that has been used for ribosome reconstitution studies and so enables the RNA to adopt a structure recognized by ribosomal proteins. The crosslinking sites were identified by primer extension and confirmed by assessing the mobility of the crosslinked RNA lariats in denaturing polyacrylamide gels. Eight crosslinks were characterized. Among them, one crosslink demonstrates that helix 28 is proximal to the top of helix 34, and two others show that the 1337 region, located in an internal loop at the junction of helices 29, 30, 41, and 42, is proximal to the center of helix 30 and to a segment connecting helix 28 to helix 29. These relationships of vicinity have previously been observed in native 30S subunits, which suggests that the free domain adopts a conformation similar to that within the 30S subunit. Furthermore, crosslinks were obtained in helix 34, which suggest that the upper and lower portions of this helix are in close proximity.