Towards the silicon nanowire-based sensor for intracellular biochemical detection

A microneedle sensor platform with integrated silicon nanowire tip was developed for intracellular biochemical detection. Because of the virtue of miniaturized size and high sensitivity, this sensor has a great potential for studying individual cell or localized bioenvironment by revealing the pH level and/or enzyme activities. The fabrication of the microneedle sensor was primarily based on conventional silicon processing, where a silicon-on-insulator (SOI) wafer with 50 nm thick (100) p-type Si device layer was used as the substrate. The silicon nanowires of 50 nm height and 50-100 nm width were created by electron beam (E-beam) lithography on the tip of microneedle with good electrical connection to the contact pads for convenient electrical measurement. A three layer structure with base, support cantilever, and needle tip was designed to ensure convenient handling of sensors and minimize the invasive penetration into biological cells. In this paper, we demonstrate a preliminary assessment of this novel intracellular sensor with electrical conductance measurement under different pH levels. It is expected that this sensor with proper chemical modification will enable localized biochemical sensing within biological cells, such as neurotransmitter activities during the synaptic communication between neuron cells.     

Recent progress on performances and mechanisms of carbon dots for gas sensing

Carbon dots (CDs), as an attractive zero-dimensional carbon nanomaterial with unique photoluminescent merits, have recently exhibited significant application potential in gas sensing as a result of their excellent optical/electronic characteristics, high chemical/thermal stability, and tunable surface states. CDs exhibit strong light absorption in the ultraviolet range and tunable photoluminescence characteristics in the visible range, which makes CDs an effective tool for optical sensing applications. Optical gas sensor based on CDs have been investigated, which generally responds to the target gas by corresponding changes in optical absorption or fluorescence. Moreover, electrical gas sensor and quartz crystal microbalance sensor whose sensing layer involves CDs have also been designed. Electrical gas sensor exhibits an increase or a decrease in electrical current, capacitance, or conductance once exposed to the target gas. Quartz crystal microbalance sensor responds to the target gas with a frequency shift. CDs greatly promote the absorption of the target gas and improve the sensitivity of both sensors. In this review, we aim to summarize different types of gas sensors involving CDs, and sensing performances of these sensors for monitoring diverse gases or vapors, as well as the mechanisms of CDs in different types of sensors. Moreover, this review provides the prospect of the potential development of CDs based gas sensors.     

Artificial cilia of magnetically tagged polymer nanowires for biomimetic mechanosensing

Polymeric nanowires of polypyrrole have been implemented as artificial cilia on giant-magneto-resistive multilayer sensors for a biomimetic sensing approach. The arrays were tagged with a magnetic material, the stray field of which changes relative to the underlying sensor as a consequence of mechanical stimuli which are delivered by a piezoactuator. The principle resembles balance sensing in mammals. Measurements of the sensor output voltage suggest a proof of concept at frequencies of around 190 kHz and a tag thickness of ～300 nm. Characterization was performed by scanning electron microscopy and magnetic force microscopy. Micromagnetic and finite-element simulations were conducted to assess basic sensing aspects.     

Label-free detection of cupric ions and histidine-tagged proteins using single poly(pyrrole)-NTA chelator conducting polymer nanotube chemiresistive sensor

Novel chemical and biological sensors based on a single poly(pyrrole)-NTA chelator nanotube for sensitive, selective, rapid and real-time detection of histidine-tagged protein and cupric ions are reported. NTA groups on the nanotube surface provided a simple mechanism for metal ion sensing via the high-affinity interaction between NTA and the subsequent detection of histidine-tagged protein through the coordination with metal chelated nanotube. Poly(pyrrole)-NTA chelator nanotubes of 190 nm outside diameter, 35 nm wall thickness and 30 microm long were synthesized by electrochemical polymerization of pyrrole-NTA inside a 200 nm diameter alumina template and assembled as a chemoresistive device by bottom-up contact geometry on a pair of parallel gold electrodes with a gap distance of 3 microm. The chemoresistive sensors based on single poly(pyrrole)-NTA chelator nanotube exhibited detection as low as one-hundredth attomolar (0.6 ppt) cupric ions and 1 ng/ml of penta-histidine tagged syntaxin protein.     

Biocompatibility of different nanostructured TiO<Subscript>2</Subscript> scaffolds and their potential for urologic applications

Despite great efforts in tissue engineering of the ureter, urinary bladder, and urethra, further research is needed in order to improve the patient’s quality of life and minimize the economic burden of different lower urinary tract disorders. The nanostructured titanium dioxide (TiO₂) scaffolds have a wide range of clinical applications and are already widely used in orthopedic or dental medicine. The current study was conducted to synthesize TiO₂ nanotubes by the anodization method and TiO₂ nanowires and nanospheres by the chemical vapor deposition method. These scaffolds were characterized with scanning electron microscopy (SEM) and X-ray diffraction (XRD) methods. In order to test the urologic applicability of generated TiO₂ scaffolds, we seeded the normal porcine urothelial (NPU) cells on TiO₂ nanotubes, TiO₂ nanowires, TiO₂ nanospheres, and on the standard porous membrane. The viability and growth of the cells were monitored everyday, and after 3 weeks of culturing, the analysis with scanning electron microscope (SEM) was performed. Our results showed that the NPU cells were attached on all scaffolds; they were viable and formed a multilayered epithelium, i.e., urothelium. The apical plasma membrane of the majority of superficial NPU cells, grown on all three different TiO₂ scaffolds and on the porous membrane, exhibited microvilli; thus, indicating that they were at a similar differentiation stage. The maximal caliper diameter measurements of superficial NPU cells revealed significant alterations, with the largest cells being observed on nanowires and the smallest ones on the porous membrane. Our findings indicate that different nanostructured TiO₂ scaffolds, especially nanowires, have a great potential for tissue engineering and should be further investigated for various urologic applications.     

Crossbar assembly of antibody-functionalized peptide nanotubes via biomimetic molecular recognition.

Previously, a large scale assembly of nanowires in a parallel array configuration has been demonstrated, and one type of nanowire could interconnect two electrodes in the high-wire density. However, to assemble nanowires into practical logic-gate configurations in integrated circuits, we need more than the parallel assembly of nanowires. For example, when the assembling nanowires are monopolar semiconductors, logic gates such as AND, OR and NOR are to be assembled necessarily from two types of semiconducting nanowires, n-type and p-type, and some of these nanowires must cross perpendicularly to form a crossbar geometry for the logical operation. In this paper, the crossbar assembly of antibody-functionalized peptide nanotubes was demonstrated by a new biomimetic bottom-up technique. Molecular recognition between antigens and antibodies enabled two types of the antibody-functionalized bionanotubes to place them onto targeted locations on substrates, where their complementary antigens were patterned. When two rectangular pads of antigens, human IgG and mouse IgG, were patterned perpendicularly on an Au substrate by nanolithography and then the antihuman IgG nanotubes and the antimouse IgG nanotubes were incubated on this substrate in solution, these bionanotubes were attached onto corresponding locations to form the crossbar configuration.     

Nanobiotechnology: protein-nanomaterial interactions

We review recent research that involves the interaction of nanomaterials such as nanoparticles, nanowires, and carbon nanotubes with proteins. We begin with a focus on the fundamentals of the structure and function of proteins on nanomaterials. We then review work in three areas that exploit these interactions: (1) sensing, (2) assembly of nanomaterials by proteins and proteins by nanomaterials, and (3) interactions with cells. We conclude with the identification of challenges and opportunities for the future.     

Molecular imprinting of proteins in polymers attached to the surface of nanomaterials for selective recognition of biomacromolecules

This review article summarizes the preparation of polymers imprinted with proteins that exhibit antibody-like specificity due to the presence of well-defined recognition sites. We present the newest developments concerned with use of nanomaterials, such as magnetic and silica nanoparticles, nanowires, carbon nanotubes, and quantum dots as supports enabling the preparation of protein-imprinted polymers via surface imprinting techniques. As an alternative receptor-like synthetic materials, these conjugates are attracting a great deal of interest in various fields including proteomics, genomics, and fabrication of selective sensors. However, imprinting of large biomacromolecules such as proteins still remains a challenge due to the inherent limitations related to protein properties. In the text below, we also describe examples of applications focused on selective recognition of biomacromolecules.     

Fabrication of silicon nanowire devices for ultrasensitive, label-free, real-time detection of biological and chemical species

Detection and quantification of biological and chemical species are central to many areas of healthcare and the life sciences, ranging from diagnosing disease to discovery and screening of new drug molecules. Semiconductor nanowires configured as electronic devices have emerged as a general platform for ultra-sensitive direct electrical detection of biological and chemical species. Here we describe a detailed protocol for realizing nanowire electronic sensors. First, the growth of uniform, single crystal silicon nanowires, and subsequent isolation of the nanowires as stable suspensions are outlined. Second, fabrication of addressable nanowire device arrays is described. Third, covalent modification of the nanowire device surfaces with receptors is described. Fourth, an example modification and measurements of the electrical response from devices are detailed. The silicon nanowire (SiNW) devices have demonstrated applications for label-free, ultrasensitive and highly-selective real-time detection of a wide range of biological and chemical species, including proteins, nucleic acids, small molecules and viruses.     

Design and performances of immunoassay based on SPR biosensor with magnetic microbeads

A surface plasmon resonance (SPR) biosensor system was developed for immunoassay, based on the conjugates of magnetic microbeads coupling with antibody which could be trapped on the Au film firmly due to the magnetic force. The magnetic microbeads were used as the solid support for the heat shock protein 70 (Hsp 70) antibody and antibody immobilized magnetic microbeads were utilized instead of the single antibody for the determination of Hsp 70. Since the magnetic bead is coated with dextran, the antibodies and some specific biomolecular receptors can be immobilized using a variety of chemical reactions. Compared to traditional antibody immobilization on the sensing film, there is not a covalent link between the Au film and the antibody. There is a great advantage in that sensor can be stripped and reused, and the same chemistry used to derivative dextran-coated SPR sensors can be used for the magnetic bead-coated sensors. The sensing layer was formed well. Different dilution ratios (v/v) of the conjugates result in different detectable ranges. When the dilution ratios of the conjugate are 1:10 and 1:5, the lowest concentrations of Hsp 70 that can be detected are 1.50 and 0.30 microg ml(-1), respectively.     

Refractive-Index Sensing with Ultrathin Plasmonic Nanotubes

We study the refractive-index sensing properties of plasmonic nanotubes with a dielectric core and ultrathin metal shell. The few nanometer thin metal shell is described by both the usual Drude model and the nonlocal hydrodynamic model to investigate the effects of nonlocality. We derive an analytical expression for the extinction cross section and show how sensing of the refractive index of the surrounding medium and the figure of merit are affected by the shape and size of the nanotubes. Comparison with other localized surface plasmon resonance sensors reveals that the nanotube exhibits superior sensitivity and comparable figure of merit.     

Conducting polymer nanowires-based label-free biosensors

Label-free sensing technologies have recently attracted a great deal of interest for sensitive, rapid and facile analysis for applications in health care, environmental monitoring, food safety and homeland security. One-dimensional (1-D) nanostructures such as nanowires, configured as field-effect transistors (FETs)/chemiresistors that change conductance upon binding of charged macromolecules to receptors linked to the device surfaces are extremely attractive for label-free biosensors. Herein, we review recent advances in label-free biosensors based on conducting polymer nanowires based FET/chemiresistor. Specifically, we address the fabrication, functionalization, assembly/alignment and sensing applications of FET/chemiresistor based on these nanomaterials. The advantages and disadvantages of various fabrication, functionalization, and assembling procedures of these nanosensors are reviewed and discussed.     

A Simple,Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors

3D printing technology can produce complex objects directly from computer aided digital designs. The technology has traditionally been used by large companies to produce fit and form concept prototypes (‘rapid prototyping’) before production. In recent years however there has been a move to adopt the technology as full-scale manufacturing solution. The advent of low-cost, desktop 3D printers such as the RepRap and emoH@baF has meant a wider user base are now able to have access to desktop manufacturing platforms enabling them to produce highly customised products for personal use and sale. This uptake in usage has been coupled with a demand for printing technology and materials able to print functional elements such as electronic sensors. Here we present formulation of a simple conductive thermoplastic composite we term ‘carbomorph’ and demonstrate how it can be used in an unmodified low-cost 3D printer to print electronic sensors able to sense mechanical flexing and capacitance changes. We show how this capability can be used to produce custom sensing devices and user interface devices along with printed objects with embedded sensing capability. This advance in low-cost 3D printing with offer a new paradigm in the 3D printing field with printed sensors and electronics embedded inside 3D printed objects in a single build process without requiring complex or expensive materials incorporating additives such as carbon nanotubes.     

High-Throughput Heterogeneous Integration of Diverse Nanomaterials on a Single Chip for Sensing Applications

There is a large variety of nanomaterials each with unique electronic, optical and sensing properties. However, there is currently no paradigm for integration of different nanomaterials on a single chip in a low-cost high-throughput manner. We present a high throughput integration approach based on spatially controlled dielectrophoresis executed sequentially for each nanomaterial type to realize a scalable array of individually addressable assemblies of graphene, carbon nanotubes, metal oxide nanowires and conductive polymers on a single chip. This is a first time where such a diversity of nanomaterials has been assembled on the same layer in a single chip. The resolution of assembly can range from mesoscale to microscale and is limited only by the size and spacing of the underlying electrodes on chip used for assembly. While many applications are possible, the utility of such an array is demonstrated with an example application of a chemical sensor array for detection of volatile organic compounds below parts-per-million sensitivity.     

Reading Biochips by Raman and Surface-Enhanced Raman Spectroscopies

Biochips are a rapidly increasing research field, driven by the versatility of sensing devices and the importance of their applications. The regular approaches for creating biochips and for reading them suffer from some limitations, motivating development of miniature biochips and label-free formats. To push forward these challenges, we have chosen to combine the methods of printing of droplets of synthetic receptors by pipettes or nanofountain pens with detection by Raman spectroscopy or its surface-assisted plasmon variant, namely, surface-enhanced Raman spectroscopy (SERS). The selected receptors included molecularly imprinted polymers (MIPs), produced by polymerization of functional and cross-linking monomers around a molecular template, the β-blocking drug propranolol. The measured Raman and SERS spectra of the MIP constituents enabled identification of the template presence and consequently chemical imaging of individual and multiple dots in an array. This concept, combining nanolithography techniques with SERS paves the road toward miniaturized arrayed MIP sensors with label-free, specific and quantitative molecular recognition.     

Electrochemiluminescent functional nucleic acids‐based sensors for food analysis

Foodborne contaminants widely exist in foods, which can lead to various foodborne diseases and food safety issues. The development of quick, sensitive and universal analytical approaches for foodborne contaminants is imperative. Electrochemiluminescent functional nucleic acids (ECL FNAs)‐based sensors are a series of sensing devices using FNAs as the recognition elements and ECL as the transducer. Contributing to the specific recognition ability of FNA and the high sensitivity of ECL, ECL FNA‐based sensors are considered to be of great application potential for foodborne contaminants monitoring. This review mainly presents the applications of ECL FNA‐based sensors for foodborne contaminants (including microorganisms, mycotoxins, allergens, antibiotics, heavy metal ions, pesticides and some illegal additives). In general, the application of ECL FNA‐based sensors in the field of food analysis is just in its infancy. Although there are several limitations and challenges, it is envisaged that ECL FNA‐based sensors will have broad prospects for food analysis in the future.     

Zwitterionic poly(carboxybetaine) hydrogels for glucose biosensors in complex media

Zwitterionic hydrogels based on poly(carboxybetaine) methacrylate (polyCBMA) were developed to protect implantable electrochemical glucose biosensors from biofouling in complex media. To enhance the linearity and sensitivity of the sensing profile, both physical and chemical adsorption methods were developed. Results show that glucose sensors coated with polyCBMA hydrogels via the chemical method achieve very high sensitivity and good linearity in response to glucose in PBS, 10%, 50%, and 100% human blood serum. Essentially identical glucose signals were observed even after prolonged exposure to blood samples for over 12 days. The excellent performance of polyCBMA hydrogel coating offers great promise for designing biocompatible implantable glucose biosensors in biological medium.     

昆虫化学感受蛋白(CSPs)的功能研究概述

昆虫的嗅觉系统与其各项生命活动息息相关,化学感受蛋白(CSPs)是嗅觉系统中的重要组成部分,可以结合气味或信息素分子,并传递给嗅觉受体,完成嗅觉相关功能。随着分子生物学技术和测序手段的不断发展,越来越多的昆虫CSPs得到鉴定。CSPs在昆虫体内广泛分布于触角、跗节、下颚须等化学感受器官,同时也在表皮、腹部、体躯等非感受器官大量表达,具有感知化学分子的功能并且与昆虫生长、发育、繁殖等生理功能及昆虫对杀虫剂的抗性相关。本文通过从CSPs的发现和命名、分子特性、结构及分布等方面展开综述,着重介绍CSPs的气味分子识别作用机制、抗药性机制及功能分类,以期为今后利用CSPs作为靶标防治害虫提供参考。     

Synthesis,Cellular Delivery and In vivo Application of Dendrimer-based pH Sensors

The development of fluorescent indicators represented a revolution for life sciences. Genetically encoded and synthetic fluorophores with sensing abilities allowed the visualization of biologically relevant species with high spatial and temporal resolution. Synthetic dyes are of particular interest thanks to their high tunability and the wide range of measureable analytes. However, these molecules suffer several limitations related to small molecule behavior (poor solubility, difficulties in targeting, often no ratiometric imaging allowed). In this work we introduce the development of dendrimer-based sensors and present a procedure for pH measurement in vitro, in living cells and in vivo. We choose dendrimers as ideal platform for our sensors for their many desirable properties (monodispersity, tunable properties, multivalency) that made them a widely used scaffold for several biomedical devices. The conjugation of fluorescent pH indicators to the dendrimer scaffold led to an enhancement of their sensing performances. In particular dendrimers exhibit reduced cell leakage, improved intracellular targeting and allow ratiometric measurements. These novel sensors were successfully employed to measure pH in living HeLa cells and in vivo in mouse brain.     

Applications of carbon nanotubes for cancer research

Carbon nanotubes have many unique properties such as high surface area, hollow cavities, and excellent mechanical and electrical properties. Interfacing carbon nanotubes with biological systems could lead to significant applications in various disease diagnoses. Significant progress in interfacing carbon nanotubes with biological materials has been made in key areas such as aqueous solubility, chemical and biological functionalization for biocompatibility and specificity, and electronic sensing of proteins. In addition, the bioconjugated nanotubes combined with the sensitive nanotube-based electronic devices would enable sensitive biosensors toward medical diagnostics. Furthermore, recent findings of improved cell membrane permeability for carbon nanotubes would also expand medical applications to therapeutics using carbon nanotubes as carriers in gene delivery systems. This article reviews the current trends in biological functionalization of carbon nanotubes and their potential applications for breast cancer diagnostics. The article also reports the applications of confocal microscopy for use in understanding the interactions of biological materials such as antibodies on carbon nanotubes that are specific to surface receptors in breast cancer cells. Furthermore, a nanotube-field-effect transistor is demonstrated for electronic sensing of antibodies that are specific to surface receptors in cancer cells.