Automated solid-phase extraction method for the determination of atovaquone in capillary blood applied onto sampling paper by rapid high-performance liquid chromatography

A bioanalytical method for the determination of atovaquone in 100 μl blood-spots by solid-phase extraction and high-performance liquid chromatography has been developed and validated. Atovaquone was extracted from the sampling paper in 0.2 M phosphoric acid and a structurally similar internal standard was added with acetonitrile before being loaded onto a C8 end-capped solid-phase extraction column. Atovaquone and internal standard were analysed by high-performance liquid chromatography on a C₁₈ J’Sphere ODS-M80 (150×4.0 mm) column with mobile phase acetonitrile–phosphate buffer, 0.01 M, pH 7.0 (65:35, v/v) and UV detection at 277 nm. The intra-assay precision was 2.7% at 12.00 μM and 13.5% at 1.00 μM. The inter-assay precision was 3.3% at 12.00 μM and 15.6% at 1.00 μM. The lower limit of quantification was 1.00 μM. The limit of detection was 0.50 μM.     

Fully automated high-performance liquid chromatography of ciprofloxacin with direct injection of plasma and Mueller–Hinton broth for pharmacokinetic/pharmacodynamic studies

An isocratic high-performance liquid chromatographic method with column switching and direct injection has been developed to determine ciprofloxacin in plasma and Mueller–Hinton broth. An on-line dilution of the sample was performed with a loading mobile phase consisting of 173 mM phosphoric acid. The analyte was retained on a LiChrocart 4-4 precolumn filled with a LiChrospher 100 RP18, 5 μm. An electric-actuated system with two six-port valves allowed a clean-up step with a mixture 20 mM phosphate buffer (pH 3.5)–methanol (97: 3, v/v) and the transfer of the analyte by a back-flush mode to a 150×4.6 mm I.D. column packed with a Kromasil C₈ 5 μm, using a mobile phase of 20 mM phosphate buffer (pH 3.5)–acetonitrile (85:15, v/v). Fluorescence detection allowed a quantification limit of 0.078 μg/ml with a 40-μl sample size. The method was evaluated to determine its usefulness in studying the pharmacokinetic/pharmacodynamic behaviour of ciprofloxacin in an in vitro model.     

Procedure for the sample preparation and handling for the determination of amino acids, monoamines and metabolites from microdissected brain regions of the rat

A method is described for the analysis of amino acids, monoamines and metabolites by high-performance liquid chromatography with electrochemical detection (HPLC–ED) from individual brain areas. The chromatographic separations were achieved using microbore columns. For amino acids we used a 100×1 mm I.D. C₈, 5 μm column. A binary mobile phases was used: mobile phase A consisted of 0.1 M sodium acetate buffer (pH 6.8)–methanol–dimethylacetamide (69:24:7, v/v) and mobile phase B consisted of sodium acetate buffer (pH 6.8)–methanol–dimethylacetamide (15:45:40, v/v). The flow-rate was maintained at 150 μl/min. For monoamines and metabolites we used a 150×1 mm I.D. C₁₈ 5 μm reversed-phase column. The mobile phase consisted of 25 mM monobasic sodium phosphate, 50 mM sodium citrate, 27 μM disodium EDTA, 10 mM diethylamine, 2.2 mM octane sulfonic acid and 10 mM sodium chloride with 3% methanol and 2.2% dimethylacetamide. The potential was +700 mV versus Ag/AgCl reference electrode for both the amino acids and the biogenic amines and metabolites. Ten rat brain regions, including various cortical areas, the cerebellum, hippocampus, substantia nigra, red nucleus and locus coeruleus were microdissected or micropunched from frozen 300-μm tissue slices. Tissue samples were homogenized in 50 or 100 μl of 0.05 M perchloric acid. The precise handling and processing of the tissue samples and tissue homogenates are described in detail, since care must be exercised in processing such small volumes while preventing sample degradation. An aliquot of the sample was derivatized to form the tert.-butylthiol derivatives of the amino acids and γ-aminobutyric acid. A second aliquot of the same sample was used for monamine and metabolite analyses. The results indicate that the procedure is ideal for processing and analyzing small tissue samples.     

Post-column enzyme reactors for chemiluminometric detection of glucose, 1,5-anhydroglucitol and 3-hydroxybutyrate in an anion-exchange chromatographic system

A liquid chromatographic system consisting of a co-immobilized 3-hydroxybutyrate dehydrogenase-NADH oxidase reactor and an immobilized pyranose oxidase reactor in series and a chemiluminometer was developed for the simultaneous determination of glucose, 1,5-anhydroglucitol and 3-hydroxybutyrate in plasma. The enzymes were immobilized on toresylated poly(vinyl alcohol) beads. Separation was achieved on a TSK gel SAX column (40×4 mm I.D.) with an eluent of 50 mM NaOH containing 30 mM sodium butyrate. The hydrogen peroxide produced was detected by measuring the chemiluminescence emitted on admixing with luminol and potassium hexacyanoferrate(III). The calibration curves were linear from 0.8 to 500 μM (7 ng−4 μg) for glucose, from 0.8 to 400 μM (7 ng−3 μg) for 1,5-anhydroglucitol and from 1 to 700 μM (5 ng−4 μg in a 50-μl injection) for 3-hydroxybutyrate. The sample throughput was four per hour. The reactors were stable for at least ten days.     

Convenient method for the determination of arginine and its related compounds in rumen fluid by reversed-phase high-performance liquid chromatography

In order to clarify arginine (Arg) metabolism by rumen microorganisms and by the tissues of ruminant animals, a convenient method for the simultaneous determination of Arg, citrulline (Cit), ornithine (Orn), proline (Pro) and 5-aminovaleric acid (5AV), and 4-aminobutyric acid (4AB) and lysine (Lys), incidentally, in goat rumen fluid was established by reversed-phase high-performance liquid chromatography (RP-HPLC). The separation was carried out by stepwise isocratic elution with two mobile phases (solvent A and solvent B) on a LiChrospher 100 RP-18 column (150×4.6 mm I.D., 5 μm particle size) equipped with a guard column (4.0×4 mm, 5 μm particle size). Solvent A is composed of acetonitrile–sodium citrate buffer (pH 7.2) (15:85, v/v) containing tetrahydrofuran (5 ml/100 ml), with solvent B comprising acetonitrile–sodium citrate buffer (pH 5.4) (40:60, v/v). Five compounds (Cit, Arg, Pro, 4AB and 5AV) were separated within 33 min in solvent A and the other two (Orn and Lys) in solvent B. Solvent A was automatically switched to solvent B with the help of a valve controller. Complete separation needs 62 min after sample injection in a single chromatogram. Samples were derivatized with 9-fluorenylmethyloxycarbonyl chloride (FMOC-Cl) and detected on a fluorescence detector at excitation and emission wavelengths of 263 and 611 nm, respectively. The minimum detectable concentrations (μM) (signal-to-noise ratio, S/N 3:1) of these compounds were: 0.65 for Cit, 0.65 for Arg, 1.9 for Pro, 1.3 for 4AB, 1.9 for 5AV, 0.12 for Orn and 0.48 for Lys. When applied to rumen fluid from goats, recoveries of all compounds added to the rumen fluid were 96.6–100.6% for an intra-day study and 93.9–99.4% for inter-day (5 days) studies. The average contents of Orn, 5AV and Lys in the rumen fluid of three goats before morning feeding were 7.3, 13.5 and 3.6 μM, but Cit, Arg, Pro, and 4AB were not found, although all these four compounds were detected 1 h after feeding. Pro (390 μM) and 5AV (497.6 μM) were highest 1 h after feeding and then decreased. Orn levels before morning feeding were most similar to those after feeding.     

High-performance liquid chromatographic method for the determination of the major quinine metabolite, 3-hydroxyquinine, in plasma and urine

The determination of 3-hydroxyquinine in urine and plasma samples is described. Extraction was performed using a mixture of toluene–butanol (75:25, v/v), followed by back-extraction into the mobile phase, which consisted of 0.1 M phosphate buffer, acetonitrile, tetrahydrofuran and triethylamine. A reversed-phase liquid chromatography system with fluorescence detection and a CT-sil C₁₈ column were used. The within-assay coefficient of variation of the method was 2% at the higher concentration values in plasma, 2.95 μM, 4% at 227 nM and 9% at the lower limit of quantitation, 4.5 nM. In urine, the coefficient of variation was 11% at the lower concentration, 227 nM and was 3% at 56.8 μM. The between-assay coefficient of variation was 4% at the low concentration (5.1 nM) in plasma, 2% at 276.8 nM and 3% at 1.97 μM. In urine, the between assay coefficient of variation was 4% at 204.6 nM, 3% at 5.12 μM and 2% at 56.8 μM.     

Capillary electrophoresis analysis of nitrite and nitrate in sub-microliter quantities of airway surface liquid

We developed a simple capillary electrophoresis (CE) method to measure nitrite and nitrate concentrations in sub-microliter samples of rat airway surface liquid (ASL), a thin (10–30 μm) layer of liquid covering the epithelial cells lining the airways of the lung. The composition of ASL has been poorly defined, in large part because of the small sample volume (1–3 μl per cm² of epithelium) and difficulty of harvesting ASL. We have used capillary tubes for ASL sample collection, with microanalysis by CE using a 50 mM phosphate buffer (pH 3), with 0.5 mM spermine as a dynamic flow modifier, and direct UV detection at 214 nm. The limit of detections (LODs), under conditions used, for ASL analysis were 10 μM for nitrate and 30 μM for nitrite (S/N=3). Nitrate and nitrite were also measured in rat plasma. The concentration of nitrate was 102±12 μM in rat ASL and 70±1.0 μM in rat plasma, whereas nitrite was 83±28 μM in rat ASL and below the LOD in rat plasma. After instilling lipopolysaccharide intratracheally to induce increased NO production, the nitrate concentration in ASL increased to 387±16 μM, and to 377±88 μM in plasma. The concentration of nitrite increased to 103±7.0 μM for ASL and 138±17 μM for plasma.     

Direct liquid chromatographic micro-measurement of tamoxifen in plasma of cancer patients

We describe in this report a sensitive and direct method for the analysis of tamoxifen (TAM) in microsamples of plasma. The drug and internal standard (quinine bisulfate, I.S.) were separated on a 10-μm particle, 10 cm × 8 mm CN cartridge in conjuction with a radial compression system. The mobile phase was a mixture of 0.1 M sodium acetate in 0.001 M tetrabutylammonium phosphate solution (pH 6) and methanol (30:70, v/v) at a flow-rate of 4 ml/min. After addition of I.S. and o-phosphoric acid in acetonitrile (0.6 M) to the plasma (30 μl), the mixture was placed in an ultraviolet shortwave transluminator for 2 min prior to injection into the chromatograph. The compounds were detected in the effluent fluorometrically at excitation and emission wavelengths of 258 and 378 nm, respectively. Under these conditions, no interference in the assay from any endogenous substance or other concurrently used drugs was observed and the retention times of I.S. and TAM were 4.4 and 10.15 min, respectively. The concentration of TAM in plasma was linearly (r>0.9983) related to the peak height ratio (TAM/I.S.) in the range 0.01–2.0 μg ml⁻¹ and C.V. at 0.075, 0.4 and 1.2 μg ml⁻¹ was 4.96%. We are currently using this assay for monitoring TAM in plasma and investigating its pharmacokinetics in cancer patients receiving cytotoxic drugs in addition to TAM as a multi-drug resistance modifier.     

Sensitive high-performance liquid chromatographic assay for motexafin gadolinium and motexafin lutetium in human plasma

We present new HPLC methods for the quantitation in human plasma of two investigative metallotexaphyrin agents, motexafin gadolinium (Gd-Tex) and motexafin lutetium (Lu-Tex). Each assay uses: the other texaphyrin analogue as an internal standard; protein precipitation with acetonitrile:methanol (50:50, v/v); an ODS reversed-phase column; an isocratic mobile phase of 100 mM ammonium acetate, pH 4.3:acetonitrile:methanol (59:21:20, v/v/v); and absorbance detection at 470 nm. The Gd-Tex assay has a lower limit of quantitation (LLOQ) of 0.01 μM and is linear between 0.01and 30 μM. The Lu-Tex assay has an LLOQ of 0.1 μM and is linear between 0.1 and 30 μM. The assays are suited for in vivo preclinical studies and clinical trials because they require minimal amounts of plasma, are sensitive, and involve a 30-min run time. These assays are important tools for evaluating the potential of Gd-Tex and Lu-Tex as a radiation enhancer and photosensitizer, respectively.     

Determination of gabapentin in plasma by high-performance liquid chromatography

A rapid and simple method for determination of the novel antiepileptic compound gabapentin [1-(aminomethyl)cyclohexaneacetic acid] in plasma is described. Blank human plasma was spiked with gabapentin (1.0–10.0 μg/ml) and internal standard [1-(aminomethyl)-cycloheptaneacetic acid; 5.0 μg/ml]. Individual samples were treated with 2 M perchloric acid, centrifuged and then derivatised with o-phthalaldehyde-3-mercaptopropionic acid. Separation was achieved on a Beckman Ultrasphere 5 μm reversed-phase column with mobile phase consisting of 0.33 M acetate buffer (pH 3.7; containing 100 mg/l EDTA)-methanol-acetonitrile (40:30:30, v/v). Eluents were monitored by fluorescence spectroscopy with excitation and emission wavelengths of 330 and 440 nm, respectively. The calibration curve for gabapentin in plasma was linear (r=0.9997) over the concentration range 1.0–10.0 μg/ml. Recovery was seen to be 90%. The inter- and intra-assay variations for three different gabapentin concentrations were 10% throughout. The lower limit of quantitation was found to be 0.5 μg/ml. Chromatography was unaffacted by a range of commonly employed antiepileptic drugs or selected amino acids.     

Automated procedure for determination of barbiturates in serum using the combined system of PrepStation and gas chromatography–mass spectrometry

A system of an automatic sample preparation procedure followed by on-line injection of the sample extract into a gas chromatograph-mass spectrometer (GC–MS) was developed for the simultaneous analysis of seven barbiturates in human serum. A sample clean-up was performed by a solid-phase extraction (SPE) on a C₁₈ disposable cartridge. A SPE cartridge was preconditioned with methanol and 0.1 M phosphate buffer. After loading 1.5 ml of a diluted serum sample into the SPE cartridge, the cartridge was washed with 2.5 ml of methanol–water (1:9, v/v). Barbiturates were eluted with 1.0 ml of chloroform–isopropanol (3:1, v/v) from the cartridge. The eluate (1 μl) was injected into the GC–MS. The calibration curves, using an internal standard method, demonstrated a good linearity throughout the concentration range from 0.1 to 10 μg ml⁻¹ for all barbiturates extracted. The proposed method was applied to 27 clinical serum samples from three patients who were administrated secobarbital.     

Determination of urinary 5-hydroxytryptophol by high-performance liquid chromatography with electrochemical detection

A high-performance liquid chromatographic method for the routine determination of elevated urinary levels of the serotonin metabolite 5-hydroxytryptophol (5-HTOL) is described. Urine samples were treated with β-glucuronidase, and 5-HTOL was isolated by solid-phase extraction on a small Sephadex G-10 column prior to injection onto an isocratically eluted C₁₈ reversed-phase column. Detection of 5-HTOL was performed electrochemically at +0.60 V vs. Ag/AgCl. The limit of detection was ca. 0.05 μM, and the intra-assay coefficients of variation were below 6% with urine samples containing 0.2 and 2.1 μM 5-HTOL and a standard solution of 2.0 μM (n = 5). The recovery of 5-HTOL after the sample clean-up procedure was close to 100%. A good correlation (r² = 0.97; n = 12) was obtained between the present method and a sensitive and specific gas chromatographic—mass spectrometric method. The total (free plus conjugated) 5-HTOL levels in urine were normally below 0.2 μM, but after an acute dose of alcohol they increased to 0.5–15 μM.     

Internal standard high-performance liquid chromatography method for the determination of obidoxime in urine of organophosphate-poisoned patients

Obidoxime is an antidote approved for reactivation of inhibited acetylcholinesterase in organophosphate poisoning. HPLC methods were described for its determination in blood or aqueous solutions but not for the determination in urine. Since data for renal obidoxime excretion ranged from 2.2 to 84% of administered dose in healthy volunteers depending on the route of administration and little is known about pharmacokinetics of obidoxime in severely intoxicated patients we developed an internal standard (HI 6) reversed-phase HPLC method for determining obidoxime in urine. The mobile phase consisted of methanol, the counter ion 1-heptane sulfonic acid and tetrabutylammonium phosphate, the stationary phase involved a 5 μm reversed-phase column (125×4 mm). Obidoxime was detected spectrophotometrically at 288 nm. The limit of quantification (LOQ) was 1 μM, the limit of detection (LOD) 0.5 μM. Linear calibration curves were obtained in a concentration range from 1 to 1000 μM. Intra- and inter-day precision C.V.s were below 4%. Accuracy was 95.9% in the LOQ range. Using this method, we were able to quantify obidoxime in urine of an organophosphate poisoned patient. Based on this data we calculated that 58% of the administered dose was excreted in the urine.     

Determination of ceftazidime in plasma using high-performance liquid chromatography and electrochemical detection: Application for individualizing dosage regimens in elderly patients

This study describes a sensitive HPLC–electrochemical detection method for the analysis of ceftazidime, a third-generation cephalosporin, in human plasma. The extraction procedure involved protein precipitation with 30% trichloroacetic acid. The separation was achieved on a reversed-phase column (250×4.6 mm I.D., 5 μm) packed with C₁₈ Kromasil with isocratic elution and a mobile phase consisting of acetonitrile–25 mM KH₂PO₄–Na₂HPO₄ buffer, pH 7.4 (10:90, v/v). The proposed analytical method is selective, reproducible and reliable. The assay has a precision of 0.2–15.1% (C.V.) in the range of 5–200 μg ml⁻¹. (corresponding to 0.5 to 20 ng of ceftazidime injected onto the column), and is optimised for assaying 50 μl of plasma. The extraction recovery from plasma was approximately 100%. The method was highly specific for ceftazidime and there was no interference from either commonly administered drugs or endogenous compounds. This assay was used to measure ceftazidime in elderly patients for therapeutic drug monitoring.     

Determination of risperidone and its major metabolite 9-hydroxyrisperidone in human plasma by reversed-phase liquid chromatography with ultraviolet detection

A simple and sensitive high-performance liquid chromatographic (HPLC) method with UV absorbance detection is described for the quantitation of risperidone and its major metabolite 9-hydroxyrisperidone in human plasma, using clozapine as internal standard. After sample alkalinization with 1 ml of NaOH (2 M) the test compounds were extracted from plasma using diisopropyl ether–isoamylalcohol (99:1, v/v). The organic phase was back-extracted with 150 μl potassium phosphate (0.1 M, pH 2.2) and 60 μl of the acid solution was injected into a C₁₈ BDS Hypersil analytical column (3 μm, 100×4.6 mm I.D.). The mobile phase consisted of phosphate buffer (0.05 M, pH 3.7 with 25% H₃PO₄)–acetonitrile (70:30, v/v), and was delivered at a flow-rate of 1.0 ml/min. The peaks were detected using a UV detector set at 278 nm and the total time for a chromatographic separation was about 4 min. The method was validated for the concentration range 5–100 ng/ml. Mean recoveries were 98.0% for risperidone and 83.5% for 9-hydroxyrisperidone. Intra- and inter-day relative standard deviations were less than 11% for both compounds, while accuracy, expressed as percent error, ranged from 1.6 to 25%. The limit of quantitation was 2 ng/ml for both analytes. The method shows good specificity with respect to commonly prescribed psychotropic drugs, and it has successfully been applied for pharmacokinetic studies and therapeutic drug monitoring.     

Separation of near-infrared fluorescent conjugates of dATP and related compounds by capillary electrophoresis

Capillary electrophoresis was examined as a means for the separation and quantitation of deoxyadenosine triphosphate (dATP) and other nucleotides that were labeled with the near-infrared fluorescent dye IRD700 or related tags. Under the final optimized conditions the labeled dATP was separated from several possible impurities, including the unconjugated forms of IRD700 and dATP, as well as dADP, dAMP and their corresponding IRD700 conjugates. The assay was performed under two sets of conditions. First, the sample was injected onto a 50 cm×75 μm I.D. fused-silica capillary at 25 kV in the presence of a pH 9.5, 140 mM borate running buffer. The resulting peaks were monitored at both 254 and 680 nm, where the latter wavelength was used to identify any species that contained the IRD700 label. A second injection was then performed under the same conditions but with a fixed concentration of dTTP now being added to the running buffer; this resulted in the formation of a complex between the dTTP and any dATP, dADP or dAMP-containing components, which changed their rates of migration and allowed them to be differentiated from unconjugated IRD700 or dye contaminants. Only 6 nl of a 1:10 diluted sample were required per analysis. The limit of detection at this injection volume was approximately 1.0 μM (or 6·10⁻¹⁵ mol for a 6-nl injection) for each monitored component. The linear range extended up to at least 80 μM. The analysis time was 20 min per injection and the day-to-day precision was ±2–3%. The same method was also found to be useful in examining related conjugates, such as those based on the dye IRD40.     

Sulfalene concentrations in plasma and blood cells of Plasmodium falciparum malaria cases after treatment with metakelfin using high-performance liquid chromatography

A reversed-phase high-performance liquid chromatographic method using acetonitrile–methanol–1 M perchloric acid–water (25:9:0.8:95, v/v/v) at a flow-rate of 1.0 ml min⁻¹ on LiChrospher 100 RP 18 column (250×4 mm; 5 μm) with UV (254 nm) detection has been developed for the determination of sulfalene in plasma and blood cells after oral administration of the antimalarial drug metakelfin. Calibration curves were linear in the range 0.5–100 μg ml⁻¹. The limit of quantification was 50 ng ml⁻¹. Within-day and day-to-day coefficients of variation averaged 3.84 and 5.31%, respectively. Mean extraction recoveries of sulfalene from plasma and blood cells were 87.21 and 84.65%, respectively. Mean concentrations of sulfalene in plasma of P. falciparum cases on days 2, 7 and 15 were 44.58, 14.90 and 1.70 μg ml⁻¹, respectively; in blood cells concentrations of sulfalene were 7.77, 3.25 and 0.75 μg ml⁻¹, respectively, after oral treatment with two tablets (1000 mg) of metakelfin. Significant difference was recorded on day 2 for sulfalene concentration in blood cells of healthy and P. falciparum cases (t=9.49; P<0.001).     

Simultaneous measurement of adenosine and hypoxanthine in human umbilical cord plasma using reversed-phase high-performance liquid chromatography with photodiode-array detection and on-line validation of peak purity

A new, robust and sensitive reversed-phase high-performance liquid chromatographic method was developed for concomitant measurement of plasma concentrations of the ATP catabolites adenosine and hypoxanthine in human umbilical cord blood. Deproteinized cord plasma was chromatographed on Hypersil C₁₈ columns, using UV photodiode-array detection, spectral analysis of peaks and on-line confirmation of peak purity. Elution with a gradient of acetonitrile–tetrahydrofuran in ammonium dihydrogen phosphate buffer pH 4.7, yielded sharp, well-resolved peaks of adenosine and hypoxanthine within 16 min. Peak areas were quantified from external calibration curves and converted to plasma concentrations via cord blood hematocrits. In seven deliveries, gestational ages 32–40 weeks, adenosine (range, 0.1–2.1 μM) was less than hypoxanthine (range, 1.6–18.5 μM) in the same cord plasma sample. Arteriovenous levels of each purine were similar, except in an abruptio placenta delivery.     

Use of guanidine hydrochloride and ammonium sulfate in comprehensive in-line sorption enrichment of xenobiotics in biological fluids by high-performance liquid chromatography

A novel approach has been developed for direct injection of physiological fluids on an in-line extraction pre-column followed by column switching in order to introduce the adsorbed xenobiotic onto the analytical column. The physiological fluid is pre-treated with guanidinium solution in water (200 μl of fluid plus 300 μl of a reagent containing 8.05 M guanidinium and 1.02 M ammonium sulfate) in order to denature protein binding sites and to serve as a universal solvent for a divergent range of polar to non-polar xenobiotics in a hydrophilic medium. A 0.5 M ammonium sulfate solution (500 μl) is used as a pre- and post-flush reagent for the extraction pre-column (30 mm × 2.1 mm I.D.). The pre-flush reagent prepares the sorbent environment of the C₁₈ pre-column for the hydrophobic retention of analytes. The post-flush reagent flushes non-retained sample proteins and salts to waste prior to switching the pre-column in-line with the analytical column. Universal chromatographic conditions for the analytical phase allows elution of a range of polar to non-polar xenobiotics within 20 min from an end-capped C₈ silica anaytical column (250 mm × 4.6 mm I.D.). This is effected by a linear gradient from a binary system consisting of solvent A (0.05 M KH₂PO₄) and solvent B (acetonitrile—isopropanol, 80:20, v/v).     

Determination of zolpidem in serum microsamples by high-performance liquid chromatography and its application to pharmacokinetics in rats

A single-solvent extraction step high-performance liquid chromatographic method is described for quantitating zolpidem in rat serum microsamples (50 μl). The separation used a 2.1 mm I.D. reversed-phase OD-5-100 C₁₈ column, 5 μm particle size with an isocratic mobile phase consisting of methanol–acetonitrile–26 mM sodium acetate buffer (adjusted to pH 2.0 with 40% phosphoric acid) containing 0.26 mM tetrabutylammonium phosphate (13:10:77, v/v/v). The detection limit was 3 ng/ml for zolpidem using an ultraviolet detector operated at 240 nm. The recovery was greater than 87% with analysis performed in 12 min. The method is simple, rapid, and applicable to pharmacokinetic studies of zolpidem after administering two intravenous bolus doses (1 and 4 mg/kg) in rats.