Characterisation of IS1126 from Porphyromonas gingivalis W83: a new member of the IS4 family of insertion sequence elements

Abstract The nucleotide sequence of IS 1126 , the only insertion sequence so far isolated from the oral pathogen Porphyromonas gingivalis , has been determined. It had a nucleotide sequence of 1338 base pair (bp) flanked by 12 bp perfect inverted repeats and generated a 5 bp target site duplication. The single major open reading frame encoded a predicted protein of 361 amino acids and molecular mass of 41 kDa. The gene encoding the transpsosase was subcloned into pUC18 and the transposase expressed in Escherichia coli minicells. The predicted amino acid sequence of the transposashad homology to putative transposases of IS 1106 and IS 1186 both of which belong to the IS 5 group within the IS₄ super-family of insertion elements. On the basis of this homology we propose that IS 1126 should also be included in the IS 5 group. Southern-blot analysis of a number of P. gingivalis strains using IS 1126 as a probe revealed a unique pattern of hybridisation for each strain and the absence of IS 1126 from other closely related Porphyromonas species. This should allow IS 1126 to be used as a rapid epidemiological tool in studying oral infections by P. gingivalis .     

IS421, a new insertion sequence in Escherichia coli

The nucleotide sequence of a new insertion sequence (IS) in Escherichia coli, IS421, was determined. It is 1340 bp long and contains inverted repeats of 22 bp at its termini. It is flanked by 13 bp direct repeats apparently generated upon insertion. There are two ORFs longer than 200 bp in IS421. One can encode a polypeptide of 371 amino acids (aa) and the other, which is on the other strand, can encode a polypeptide of 102 aa. The C-terminal part of the 371 aa polypeptide shows some homology to that of transposases encoded in some other known IS elements. The copy number of IS421 in chromosomal DNA was 4 for E. coli K-12 and B, and 5 for E. coli C, as determined by the Southern hybridization of restriction fragments.     

Characterization of insertion sequence IS892 and related elements from the cyanobacterium Anabaena sp. strain PCC 7120.

IS892, one of the several insertion sequence (IS) elements discovered in Anabaena sp. strain PCC 7120 (Y. Cai and C. P. Wolk, J. Bacteriol. 172:3138-3145, 1990), is 1,675 bp with 24-bp near-perfect inverted terminal repeats and has two open reading frames (ORFs) that could code for proteins of 233 and 137 amino acids. Upon insertion into target sites, this IS generates an 8-bp directly repeated target duplication. A 32-bp sequence in the region between ORF1 and ORF2 is similar to the sequence of the inverted termini. Similar inverted repeats are found within each of those three segments, and the sequences of these repeats bear some similarity to the 11-bp direct repeats flanking the 11-kb insertion interrupting the nifD gene of this strain (J. W. Golden, S. J. Robinson, and R. Haselkorn, Nature [London] 314:419-423, 1985). A sequence similar to that of a binding site for the Escherichia coli integration host factor is found about 120 bp from the left end of IS892. Partial nucleotide sequences of active IS elements IS892N and IS892T, members of the IS892 family from the same Anabaena strain, were shown to be very similar to the sequence of IS892.     

Nucleotide sequence analysis of IS427 and its target sites in Agrobacterium tumefaciens T37

We have determined the nucleotide sequence of IS427, an insertion sequence from Agrobacterium tumefaciens T37, IS427 is 1271 bp long, contains 16-bp imperfect terminal inverted repeats, and generates a 2-bp target sequence duplication. It is present at three sites in the pTiT37 plasmid and is absent from the chromosome of A. tumefaciens T37. Each of the IS427 elements sequenced was near a site with sequence homology to integration host factor (IHF)-binding sites which suggested that IHF may be involved in IS427 transposition.     

Cloning and sequencing of IS1086, an Alcaligenes eutrophus insertion element related to IS30 and IS4351.

A new insertion sequence (IS), designated IS1086, was isolated from Alcaligenes eutrophus CH34 by being trapped in plasmid pJV240, which contains the Bacillus subtilis sacB and sacR genes. The 1,106-bp IS1086 element contains partially matched (22 of 28 bp) terminal-inverted repeats and a long open reading frame. Hybridization data suggest the presence of one copy of IS1086 in the strain CH34 heavy-metal resistance plasmid pMOL28 and at least two copies in its chromosome. Analysis of the IS1086 nucleotide sequence revealed striking homology with two other IS elements, IS30 and IS4351, suggesting that they are three close members in a family of phylogenetically related insertion sequences. One open reading frame of the Spiroplasma citri phage SpV1-R8A2 B was also found to be related to this IS family but to a lesser extent. Comparison of the G+C contents of IS30 and IS1086 revealed that they conform to their respective hosts (46 versus 50% for IS30 and Escherichia coli and 64.5% for IS1086 and A. eutrophus). The pressure on the AT/GC ratio led to a very different codon usage in these two closely related IS elements. Results suggesting that IS1086 transposition might be activated by some forms of stress are discussed.     

IS186 Insertion at a Hot Spot in the lon Promoter as a Basis for Lon Protease Deficiency of Escherichia coli B: Identification of a Consensus Target Sequence for IS186 Transposition

The radiation sensitivity of Escherichia coli B was first described more than 50 years ago, and the genetic locus responsible for the trait was subsequently identified as lon (encoding Lon protease). We now show that both E. coli B and the first reported E. coli K-12 lon mutant, AB1899, carry IS186 insertions in opposite orientations at a single site in the lon promoter region and that this site represents a natural hot spot for transposition of the insertion sequence (IS) element. Our analysis of deposited sequence data for a number of other IS186 insertion sites permitted the deductions that (i) the consensus target site sequence for IS186 transposition is 5'-(G)(> or =4)(N)(3-6)(C)(> or =4)-3', (ii) the associated host sequence duplication varies within the range of 6 to 12 bp and encompasses the N(3-6) sequence, and (iii) in a majority of instances, at least one end of the duplication is at the G-N (or N-C) junction. IS186-related sequences were absent in closely related bacterium Salmonella enterica serovar Typhimurium, indicating that this IS element is a recent acquisition in the evolutionary history of E. coli.     

Identification, distribution, and sequence analysis of new insertion elements in Caulobacter crescentus.

We describe two insertion elements isolated from Caulobacter crescentus that are designated IS298 and IS511. These insertion elements were cloned from spontaneous flagellar (fla) gene mutants SC298 and SC511 derived from the wild-type strain CB15 (ATCC 19089), in which they were originally identified as insertions in the flbG operon of the hook gene cluster (N. Ohta, E. Swanson, B. Ely, and A. Newton, J. Bacteriol. 158:897-904, 1984). IS298 and IS511 were each present in C. crescentus CB2 and CB15 in at least four different positions, but neither was present in strain CB13 or in several Caulobacter species examined, including C. vibrioides, C. leidyia, and C. henricii. Nucleotide sequence analysis across the chromosome-insertion element junctions showed that IS298 is located 152 base pairs (bp) upstream from the ATG translation start of the hook protein gene flaK, where it is bounded by a 4-bp direct repeat derived from the site of insertion, and that IS511 is inserted at codon 186 of the flaK coding sequence, where it is also bounded by a 4-bp direct repeat duplicated from the site of insertion. The ilvB102 mutation in strain SC125 was also shown to result from insertion sequence IS511, but no duplication of the genomic sequence was present at the insertion element junctions. IS298 contains an imperfect terminal inverted repeat 16 bp long, and IS511 contains a 32-bp inverted repeat at the termini. IS298 and IS511 are the first insertion elements described in C. crescentus.     

Nucleotide sequence and characterization of a new insertion element, IS240, from Bacillus thuringiensis israelensis

The nucleotide sequence of two repeated sequences (RS) in opposite orientations flanking the 125-kDa toxin gene of Bacillus thuringiensis israelensis (C. Bourgouin et al., J. Bacteriol. 170, 3575-3583, 1988) is reported in this paper. The analysis of these sequences indicates that these two RS display characteristic features of bacterial insertion sequences (IS) and are therefore referred to as IS240. IS240 B is 865 bp long and has two perfect terminal-inverted repeats of 16 bp; IS240 A is 99% identical to IS240 B. A long open reading frame encoding a polypeptide of 235 amino acids spans almost the entire sequence of both IS240 elements. Both the sequence of the inverted repeats and the putative transposases are homologous to IS26 of Proteus vulgaris, IS15-delta of Salmonella panama, IS431 of Staphylococcus aureus, and ISS1 of Streptococcus lactis.     

Nucleotide sequence of IS110, an insertion sequence of Streptomyces coelicolor A3(2).

The nucleotide sequences of the Streptomyces transposable element IS110 and its insertion site in the DNA of a derivative of the temperate phage luminal diameter C31 were determined. The element is inserted about 460 bp from the right-hand end of luminal diameter C31 DNA, in a region of apparently non-coding DNA. The target site (in a run of seven C residues) is within an 11 bp sequence homologous with one end of IS110. The inserted element is flanked by runs of 11 and 15 C residues which form part of more extensive regions of homology between the left and right junction regions. Imperfect inverted repeats (10 matches out of 15 bp) are present near (but not at) the ends of IS110. The whole IS110 element contains about 1550 bp of which 71% are G-C bp. One major potentially protein-coding region (ORF 1215) was detected, of 1215 bp, the product of which, a presumptively soluble protein of MR 43,563, was not overtly related to any entry in a protein sequence database. A smaller open reading frame (ORF 330) was tentatively identified in the opposite strand of the ORF 1215 region.     

IS902, an insertion element of the chronic-enteritis-causing Mycobacterium avium subsp. silvaticum.

An insertion sequence element of Mycobacterium avium subsp. silvaticum was isolated and its complete nucleotide sequence determined. IS902 is 1470 bp in size and is repeated 10-12 times per genome. An open reading frame of 1200 bp was identified, encoding a protein product of Mr 43932. This protein is highly similar to the predicted proteins of IS900 of Mycobacterium paratuberculosis, IS116 of Streptomyces clavuligerus and IS110 of Streptomyces coelicolor. IS902 lacks terminal inverted repeats and flanking direct repeats but displays insertion site specificity.     

云南猕猴mtDNA控制区全序列测定

目的测定云南猕猴线粒体DNA控制区全序列,对其进行鉴定及进化分析。方法利用PCR技术扩增猕猴线粒体DNA控制区全序列,结合GenBank中下载的猕猴参考序列（AY612638）,采用多个生物学软件对序列碱基组成、同源性、转换／颠换比等遗传信息进行分析,并基于邻接法（NJ）和最小进化法（ME）构建系统进化树。结果云南猕猴线粒体DNA控制区全长为（1084-1089）bp,A、T、G和c四种碱基平均含量分别为29．9％、26．9％、12．3％和30．9％,A＋T含量（56．8％）高于G＋C含量（43．2％）。所分析序列间的同源性为91．5％-99．5％,平均核苷酸变异率为4．5％,变异类型包括转换、颠换、插入和缺失4种形式,转换／颠换比值平均为26．1。进化树显示云南猕猴存在两个平行进化的姐妹分支。结论本研究获得了云南猕猴mtDNA控制区全序列,为猕猴进化关系研究及mtDNA控制区功能研究奠定基础。     

节瓜Ty1-copia类逆转座子逆转录酶序列的克隆及比对

对8个节瓜（Benincasa hispida var.chieh-qua How）品系基因组DNA中的Ty1-copia类逆转座子逆转录酶核苷酸序列进行扩增,并对品系A39FA的29个克隆产物的核苷酸序列及翻译的氨基酸序列的系统进化和同源性进行了分析,还对29条氨基酸序列进行了比对。扩增结果表明：8个节瓜品系的基因组DNA中均包含长度约260 bp的逆转录酶核苷酸片段;从品系A39FA中获得的29条Ty1-copia类逆转座子逆转录酶核苷酸序列（CqRt1至CqRt29）的长度为247~267 bp,同源率为46.2%~98.1%,而它们的氨基酸序列同源率为26.7%~98.8%。序列分析结果表明：节瓜Ty1-copia类逆转座子逆转录酶核苷酸序列中碱基A、T、G和C的数量分别为65~96、47~92、45~74和32~49,所有序列均富含碱基A和T,AT/GC比为1.35~2.33;缺失突变是造成节瓜Ty1-copia类逆转座子逆转录酶核苷酸序列长度差异的主要因素,在序列长度和碱基组成方面的明显差异表明节瓜Ty1-copia类逆转座子逆转录酶核苷酸序列具有高度异质性。翻译后的氨基酸序列中有21条序列存在终止密码子突变、12条序列存在移框突变,表明Ty1-copia类逆转座子是节瓜基因组内序列重组的热点。通过聚类分析可将29个逆转录酶核苷酸序列分为5个家族（Family）,分别包括16、4、4、4和1条序列,其中Family 1可能是具有转座活性的逆转座子家族,但存在转录活性的逆转录酶序列仅占全部序列数量的20.69%。将每一家族中的1~2条序列与其他15种植物的Ty1-copia类逆转座子逆转录酶的氨基酸序列进行比对,显示出较高的同源性。研究结果表明：节瓜与其他植物的Ty1-copia类逆转座子可能有相同起源,而且Ty1-copia类逆转座子可在不同类群间横向传递。     

IS870 requires a 5'-CTAG-3' target sequence to generate the stop codon for its large ORF1.

The TB regions of the Agrobacterium vitis octopine/cucumopine Ti plasmids constitute a family of related structures. All contain a bacterial insertion element downstream of the TB-iaaM gene, IS870.1. Whereas 43 isolates with octopine/cucumopine Ti plasmids carry only one IS870 copy, strain Ag57 carries a second copy (IS870.2) 3.9 kb to the right of IS870.1 and part of the same TB region. Two other octopine/cucumopine strains carry an IS870 copy on their chromosome (IS870.3). A study of the unmodified insertion sites of IS870.2 and IS870.3, cloned from closely related strains, enabled us to delimit the IS870 elements. IS870 has a size of 1,152 bp and is terminated by inverted repeats. It contains a large open reading frame without a stop codon. However, a stop codon is generated by insertion into the target sequence 5'-CTAG-3'. IS870 is related to five other insertion sequence elements. For two of these, the stop codon of the largest open reading frame is also created by insertion into a CTAG target site.     

Evidence of Horizontal Transfer of the EcoO109I Restriction-Modification Gene to Escherichia coli Chromosomal DNA

A DNA fragment carrying the genes coding for EcoO109I endonuclease and EcoO109I methylase, which recognize the nucleotide sequence 5'-(A/G)GGNCC(C/T)-3', was cloned from the chromosomal DNA of Escherichia coli H709c. The EcoO109I restriction-modification (R-M) system was found to be inserted between the int and psu genes from satellite bacteriophage P4, which were lysogenized in the chromosome at the P4 phage attachment site of the corresponding leuX gene observed in E. coli K-12 chromosomal DNA. The sid gene of the prophage was inactivated by insertion of one copy of IS21. These findings may shed light on the horizontal transfer and stable maintenance of the R-M system.     

Sequence effects on translesion synthesis of an aminofluorene-DNA adduct: conformational, thermodynamic, and primer extension kinetic studies

The DNA sequence effect is an important structural factor for determining the extent and nature of carcinogen-induced mutational and repair outcomes. In this study, we used two 16-mer template sequences, TG*A [d(5'-CTTCTTG*ACCTCATTC-3')] and CG*A [d(5'-CTTCTCG*ACCTCATTC-3')], to study the impact of the 5'-flanking nucleotide (T vs C) on aminofluorene (AF)-induced stacked (S)/major groove (B)/wedge (W) conformational heterogeneity during a simulated translesion synthesis. In addition, we probed the sequence effect on nucleotide insertion efficiencies catalyzed by the Klenow fragment (exonuclease-deficient) of DNA polymerase I. Our (19)F NMR/ICD/DSC results showed that AF in the CG*A duplex sequence adopts a greater population of S-conformer than the TG*A sequence. We found that the S conformer of CG*A thermodynamically favors insertion of A over C at the lesion site (n). Significant stalling occurred at both the prelesion (n - 1) and lesion (n) sites; however, the effect was more persistent for the S conformer of CG*A than TG*A at the lesion site (n). Kinetics show that relative nucleotide insertion frequencies (f(ins)) were greater for TG*A than the S conformer of CG*A for either dCTP or dATP at the lesion site (n), and the insertion rate was significantly reduced at immediate upstream base pairs (n, n + 1). Taken together, the results provide insight into how the mutagenic AF could exhibit an S/B/W equilibrium in the active site of a polymerase, causing different mutations. This work represents a novel structure-function relationship in which adduct structure is directly linked to nucleotide insertion efficiency in a conformation-specific manner during translesion DNA synthesis.     

The nucleotide sequence of IS5 from Escherichia coli

A 3-kb fragment of Haemophilus haemolyticus DNA which carries the HhaII restriction (r) and modification (m) genes has been cloned into the PstI site of pBR322 (Mann et al., 1978). When propagated in Escherichia coli, it was observed that spontaneous insertions of IS5 inactivated the restriction gene, producing r- mutants at a frequency of 10(-6). Electron microscopy, restriction-site mapping and sequence analysis of two r- plasmids have demonstrated the presence of IS5 at a single target site in both possible orientations. The complete nucleotide sequence of IS5 has been determined. It is 1195 bp long and has inverted terminal repeats of 16 bp. The target site for IS5 in this plasmid is 5'-CTAG. Approx. ten copies of IS5 were found to be present at about the same locations on the E. coli chromosome in various K-12 strains, using Southern hybridization analysis.