Mobilization of plasmid pHSV106 from Escherichia coli HB101 in a laboratory-scale waste treatment facility.

The mobilization of plasmid pHSV106 from Escherichia coli HB101, in a laboratory model waste treatment facility, by both laboratory and indigenous wastewater strains of E. coli was monitored by transfer of antibiotic resistance characteristics and by detection of pHSV106 DNA sequences in recipient cells. The mobilization was demonstrated to occur under several different treatment conditions, such as different media composition, microbial concentrations, and waste flow rates. The herpes simplex virus thymidine kinase gene was used as a hybridization marker to confirm the occurrence of the transfer. The use of the HB101 (recA mutant) host cell implies that recA functions are unnecessary for the gene transfer.     

Mobilization of the genetically engineered plasmid pHSV106 from Escherichia coli HB101(pHSV106) to Enterobacter cloacae in drinking water.

We have used triparental matings to demonstrate transfer (mobilization) of the nonconjugative genetically engineered plasmid pHSV106, which contains the thymidine kinase gene of herpes simplex virus cloned into pBR322, from Escherichia coli HB101 to an environmental isolate of Enterobacter cloacae in sterile drinking water. This is the first demonstration of a two-step mobilization of a genetically engineered plasmid in any type of fresh water, including drinking water. Transfer was mediated by R plasmid R100-1 of E. coli ED2149(R100-1). Matings in drinking water at 15, 25, and 35 degrees C yielded recombinants, the number of which increased with increasing temperature. Numbers of recombinants obtained were 2 orders of magnitude lower than those obtained from matings in Trypticase soy broth. High concentrations of parental organisms (2.6 x 10(8) to 2.0 x 10(9) CFU/ml) were required. During 1 week of incubation in drinking water, number of parental organisms and recombinants resulting from mobilization remained constant in the absence of indigenous organisms and declined in their presence. Using oligonucleotide probes for the cloned foreign DNA (thymidine kinase gene) and plasmid vector DNA (ampicillin resistance gene), we demonstrated that both genes were transferred to E. cloacae in the mobilization process. In one recombinant selected for detailed study, the plasmids containing these genes differed in size from all forms of pHSV106 present in E. coli HB101(pHSV106), indicating that DNA rearrangement had occurred. This recombinant maintained its plasmids in unchanged form for 15 days in drinking water. A second rearrangement occurred during serial passage of this recombinant on selective media.(ABSTRACT TRUNCATED AT 250 WORDS)     

Mobilization of the genetically engineered plasmid pHSV106 from Escherichia coli HB101(pHSV106) to Enterobacter cloacae in drinking water

We have used triparental matings to demonstrate transfer (mobilization) of the nonconjugative genetically engineered plasmid pHSV106, which contains the thymidine kinase gene of herpes simplex virus cloned into pBR322, from Escherichia coli HB101 to an environmental isolate of Enterobacter cloacae in sterile drinking water. This is the first demonstration of a two-step mobilization of a genetically engineered plasmid in any type of fresh water, including drinking water. Transfer was mediated by R plasmid R100-1 of E. coli ED2149(R100-1). Matings in drinking water at 15, 25, and 35 degrees C yielded recombinants, the number of which increased with increasing temperature. Numbers of recombinants obtained were 2 orders of magnitude lower than those obtained from matings in Trypticase soy broth. High concentrations of parental organisms (2.6 x 10(8) to 2.0 x 10(9) CFU/ml) were required. During 1 week of incubation in drinking water, number of parental organisms and recombinants resulting from mobilization remained constant in the absence of indigenous organisms and declined in their presence. Using oligonucleotide probes for the cloned foreign DNA (thymidine kinase gene) and plasmid vector DNA (ampicillin resistance gene), we demonstrated that both genes were transferred to E. cloacae in the mobilization process. In one recombinant selected for detailed study, the plasmids containing these genes differed in size from all forms of pHSV106 present in E. coli HB101(pHSV106), indicating that DNA rearrangement had occurred. This recombinant maintained its plasmids in unchanged form for 15 days in drinking water. A second rearrangement occurred during serial passage of this recombinant on selective media.(ABSTRACT TRUNCATED AT 250 WORDS)     

Overcoming a defect in generalized recombination in the marine fish pathogen Vibrio anguillarum 775: construction of a recA mutant by marker exchange.

A defect in generalized recombination has prevented the use of marker exchange for the construction of specific chromosomal mutations in the marine fish pathogen Vibrio anguillarum 775. Through the use of large segments of homologous DNA, we were successful in overcoming this defect and used marker exchange to construct a recA mutant of V. anguillarum H775-3. A recombinant cosmid carrying the recA gene of V. anguillarum 775 in the center of a 25-kb cloned DNA insert was isolated by complementation of methyl methanesulfonate (MMS) sensitivity in Escherichia coli HB101. The recA gene was inactivated by inserting a kanamycin resistance gene into recA, and the mutant gene was subsequently introduced into V. anguillarum H775-3 by conjugal mobilization. Isolation of recombinants between cosmid-borne recA::kan sequences and chromosomal DNA was facilitated by the introduction of an incompatible plasmid, and Southern hybridization was used to verify the presence of recA::kan in the chromosomal DNA of the recA mutant. V. anguillarum carrying recA::kan was considerably more sensitive to UV radiation and to MMS than was its parent, and near wild-type levels of resistance to MMS and UV light were restored by introduction of cloned recA genes from both E. coli and V. anguillarum. These results indicate that recA is required for DNA repair in V. anguillarum and demonstrate the utility of this modified marker exchange technique for the construction of mutations in this economically important fish pathogen.     

Molecular cloning and biological characterization of the recA gene from Pseudomonas syringae.

We have identified a recombinant plasmid, pCUV8, from a cosmid library of Pseudomonas syringae genomic DNA which contains a functional analog of the Escherichia coli recA gene. The plasmid was initially identified by its ability to restore UV resistance to E. coli HB101. Quantitative analysis demonstrated that it restored both recombination proficiency and UV resistance to an E. coli recA deletion mutant. By these criteria, pCUV8 appears to contain the P. syringae recA gene. Several pathogenic and epiphytic strains of P. syringae, but not E. coli, showed sequence homology to pCUV8 under normal stringency.     

Molecular cloning and expression in Escherichia coli of the recA gene of Legionella pneumophila

Interspecific complementation of an Escherichia coli recA mutant with a Legionella pneumophila genomic library was used to identify a recombinant plasmid encoding the L. pneumophila recA gene. Recombinant E. coli strains harbouring the L. pneumophila recA gene were isolated by replica-plating bacterial colonies on medium containing methyl methanesulphonate (MMS). MMS-resistant clones were identified as encoding the L. pneumophila recA analogue by their ability to protect E. coli HB101 from UV exposure and promote homologous recombination. Subcloning of selected restriction fragments and Tn5 mutagenesis localized the recA gene to a 1.7 kb Bg/II-EcoRI fragment. Analysis of minicell preparations harbouring a 1.9 kb EcoRI fragment containing the recA coding segment revealed a single 37.5 kDa protein. Insertional inactivation of the cloned recA gene by Tn5 resulted in the disappearance of the 37.5 kDa protein, concomitant with the loss of RecA function. The L. pneumophila recA gene product did not promote induction of a lambda lysogen; instead, the presence of the heterologous recA gene caused a significant reduction in spontaneous and mitomycin-C-induced prophage induction in recA+ and recA E. coli backgrounds. Despite the lack of significant genetic homology between the L. pneumophila recA gene and the E. coli counterpart, the L. pneumophila RecA protein was nearly identical to that of E. coli in molecular mass, and the two proteins showed antigenic cross-reactivity. Western blot analysis of UV-treated L. pneumophila revealed a significant increase in RecA antigen in irradiated versus control cells, suggesting that the L. pneumophila recA gene is regulated in a manner similar to that of E. coli recA.     

Transfer of the plasmid RP1 in vivo in germ free mice and in vitro in gut extracts and laboratory media

Abstract: The frequency of conjugal transfer of the plasmid RP1 from two different Escherichia coli donor strains (HB101 and X7, Rif^R) to the same E. coli recipient strain (X7, Nal^R) was measured in vivo (germ free mice) and in vitro (intestinal extracts, caecal contents and laboratory liquid and agar media). The transfer frequencies of the plasmid from X7, Rif^R and HB101 in vivo were not significantly different from those obtained when using intestinal extracts or caecal contents. In contrast, compared to in vivo, a significant difference in frequency of transfer was obtained from one of the donors, X7, Rif^R when using laboratory liquid media ( P < 0.05) and a significant difference in frequency was noted for donor HB101 when using laboratory agar ( P < 0.01). When comparing the ratio of transfer frequency between the two different donors, the plasmid consistently transferred at a higher frequency in vivo and in in vitro caecal contents from X7, Rif^R than from HB101 ( P < 0.05). The same pattern was observed when using in vitro intestinal extracts ( P > 0.05). In contrast, when laboratory agar was used, the opposite occurred and the transfer was greater from HB101 than from X7, Rif^R ( P < 0.05). The transfer frequency in laboratory liquid media was highly variable from donor X7, Rif^R and no significant difference ( P > 0.05) could be seen between the two donors. We conclude that the intestinal extracts and caecal contents better reflect the natural environment than any of the laboratory media tested for the parameter investigated. Furthermore, it is shown that transfer using laboratory agar did not reflect in vivo conditions. The data supports the concept of using sub-samples of an ecosystem as a microcosm for modelling the ecosystem.     

Cloning and expression in Escherichia coli of a recA-like gene from the acidophilic autotroph Thiobacillus ferrooxidans

A recombinant plasmid, pRSR100, containing the functional analogue of the Escherichia coli recA gene was isolated from a genomic library of Thiobacillus ferrooxidans ATCC 33020. The plasmid complemented defects in DNA repair and homologous recombination in E. coli recA mutant strains. Antiserum raised against E. coli RecA protein reacted with the native but defective E. coli HB101 RecA protein; it did not react with protein extracts from the recA deletion mutant E. coli JK696, but it reacted with two protein bands in extracts of E. coli JK696(pRSR100). A single band with an apparent Mr equal to the higher-Mr band in E. coli JK696(pRSR100) was detected in T. ferrooxidans cell extracts with the E. coli RecA antiserum.     

Conjugal transfer of recombinant plasmids into gellan gum-producing and non-producing variants of Pseudomonas elodea ATCC 31461

The conjugal transfer of recombinant plasmids into a gellan gum-producing, rifampicin-resistant strain of Pseudomonas elodea and into one of its non-producing variants, was studied in order to facilitate the cloning of gellan genes. The mobilization frequency of recombinant plasmids derived from pKT240, and of cosmid pJRD215 from Escherichia coli HB101 (hsdM), into the mucoid strain was below the values for the non-mucoid variant and decreased exponentially with plasmid size. Reducing the mating time on solid surfaces led to higher mobilization frequencies. Under optimal conditions, a gene bank (40-50 kb) constructed in the cosmid pJRD215 was efficiently mobilized into Gel- mutants during complementation experiments.     

Simultaneous synthesis of human-, mouse- and chimeric epidermal growth factor genes via ''hybrid gene synthesis'' approach.

Simultaneous synthesis of two DNA duplexes encoding human and mouse epidermal growth factors (EGF) was accomplished in a single step. A 174 b.p. DNA heteroduplex, with 16 single and double base pair mismatches, was designed. One strand encoded the human EGF, and the opposite strand indirectly encoded the mouse EGF. The heteroduplex DNA was synthesized by ligation of seven overlapping oligodeoxyribonucleotides with a linearized plasmid. After transformation in E. coli HB101 (recA 13), the resulting heteroduplex plasmid served as the template in plasmid replication. Two different plasmid progenies bearing either the human or mouse EGF-coding sequence were identified by colony hybridization using the appropriate probes. However, in E. coli JM103, the same process yielded plasmid progenies encoding different chimeric EGF molecules, presumably due to crossover of human and mouse EGF gene sequences.     

类产碱假单胞菌耐热碱性脂肪酶基因的克隆

将类产碱假单胞菌(Pseudomonas pseudoalcaligene)总DNA经Sau3AI部分酶解后的35～50kbDNA片段与经BamHI线性化及CIAP处理过的粘粒pIJ285连接,以大肠杆菌LE392为受体,构建类产碱假单胞菌的基因文库。通过三丁酸甘油酯平板和橄榄油平板法检测克隆子,获得一株具有耐热碱性脂肪酶活性的菌株LE392(pHZ1401)。随后将pHZ1401上的外源DNA片段进行亚克隆,从而获得了具有脂肪酶活性的菌株HB101(pHZ1402)和HB101(pHZ1403),它们分别携带有2.9kb和3.0kb的外源片段。两外源片段约有2kb的重叠区。HB101(pHZ1403)所分泌的脂肪酶活性比HB101(pHZ1402)高4倍,是出发菌的5倍。     

Construction of a novel suicide vector: selection for Escherichia coli HB101 recombinants carrying the DNA insert.

We constructed a new type of cloning vector, pERISH2, that transforms Escherichia coli HB101 only when a foreign DNA fragment is ligated into the cloning site of the plasmid vector. Plasmid pERISH2 carries the rcsB gene which is derived from the chromosome of E. coli HB101 and is involved in the regulation of colanic acid production. When E. coli HB101 is transformed by this vector carrying the intact rcsB gene, the gene product RcsB blocks bacterial growth. However, if the rcsB gene is inactivated by the insertion of a foreign DNA fragment, this recombinant plasmid no longer inhibits the growth of E. coli HB101. Although E. coli HB101 is not stably transformed by pERISH2, E. coli K-12 strains such as JM109 and C600 can harbor this vector. Therefore, pERISH2 can be amplified in JM109 and be prepared from this strain in a large quantity using conventional methods. A chromosomal gene library of Klebsiella pneumoniae is constructed easily and efficiently by the utilization of this new cloning vector.     

Construction and shuttling of novel bifunctional vectors for Streptomyces spp. and Escherichia coli.

Shuttle vectors for gene transfer between Streptomyces spp. and Escherichia coli have been constructed by fusion of an artificial multicopy E. coli replicon and DNA fragments of pIJ702. Stable transfer to Streptomyces lividans was obtained. Marked differences in transformation efficiency were observed when plasmid DNA isolated from E. coli GM119 was used instead of that from strain HB101.     

Construction of an Escherichia coli-Clostridium perfringens shuttle vector and plasmid transformation of Clostridium perfringens

A stable shuttle vector which replicates in Escherichia coli and Clostridium perfringens was constructed by ligating a 3.6-kilobase (kb) fragment of plasmid pBR322 with C. perfringens plasmid pHB101 (3.1 kb). The marker for this shuttle plasmid originated from the 1.3-kb chloramphenicol resistance gene of plasmid pHR106. The resulting shuttle vector, designated pAK201, is 8 kb in size and codes for resistance to 20 micrograms of chloramphenicol per ml in both E. coli and C. perfringens. Following shuttle vector construction in E. coli, plasmid pAK201 was transformed into E. coli HB101 and C. perfringens ATCC 3624A, using intact cell electroporation. The transformation frequencies were 10(6) and 10(4) transformants per microgram of DNA in E. coli and C. perfringens, respectively. Restriction enzyme analysis of the chimera isolated from transformants of both microorganisms suggested that the plasmids were identical. Reciprocal transformation experiments in E. coli and C. perfringens indicated no difference in transformation frequency. Plasmid pAK201 was stable in C. perfringens following repeated transfer in the absence of chloramphenicol pressure. The restriction map of plasmid pAK201 shows six unique cut sites which should be useful for future genetic analysis and C. perfringens gene library construction.     

Construction of an Escherichia coli-Clostridium perfringens shuttle vector and plasmid transformation of Clostridium perfringens.

A stable shuttle vector which replicates in Escherichia coli and Clostridium perfringens was constructed by ligating a 3.6-kilobase (kb) fragment of plasmid pBR322 with C. perfringens plasmid pHB101 (3.1 kb). The marker for this shuttle plasmid originated from the 1.3-kb chloramphenicol resistance gene of plasmid pHR106. The resulting shuttle vector, designated pAK201, is 8 kb in size and codes for resistance to 20 micrograms of chloramphenicol per ml in both E. coli and C. perfringens. Following shuttle vector construction in E. coli, plasmid pAK201 was transformed into E. coli HB101 and C. perfringens ATCC 3624A, using intact cell electroporation. The transformation frequencies were 10(6) and 10(4) transformants per microgram of DNA in E. coli and C. perfringens, respectively. Restriction enzyme analysis of the chimera isolated from transformants of both microorganisms suggested that the plasmids were identical. Reciprocal transformation experiments in E. coli and C. perfringens indicated no difference in transformation frequency. Plasmid pAK201 was stable in C. perfringens following repeated transfer in the absence of chloramphenicol pressure. The restriction map of plasmid pAK201 shows six unique cut sites which should be useful for future genetic analysis and C. perfringens gene library construction.     

Molecular cloning and expression of a xylanase gene of alkalophilic Aeromonas sp. no. 212 in Escherichia coli

A gene coding for a xylanase activity of alkalophilic Aeromonas sp. no. 212 (ATCC 31085) was cloned in Escherichia coli HB101 with pBR322. Plasmid pAX1 was isolated from transformants producing xylanase, and the xylanase gene was located in a 6.0 kb Hind III fragment. The pAX1-encoded xylanase activity in E. coli HB101 was about 80 times higher than that of xylanase L in alkalophilic Aeromonas sp. no. 212. About 40% of the enzyme activity was observed in the periplasmic space of E. coli HB101. The pAX1-encoded xylanase had the same enzymic properties as those of xylanase L produced by alkalophilic Aeromonas sp. no. 212, but its molecular weight was lower (135 000 vs 145 000, as estimated by SDS polyacrylamide gel electrophoresis).     

Increased stability of maintenance of pAT153 in Escherichia coli HB101 due to transposition of IS1 from the chromosome into the tetracycline resistance region of pAT153

Abstract The plasmid vector pAT153 was rapidly lost from carbon-limited continuous cultures of Escherichia coli HB101 (pAT153) at a dilution rate of 0.15 h⁻¹. In one experiment, the plasmid was maintained by 80% of the host bacteria for up to 35 generations. The tetracycline-resistance gene was not expressed from the majority of the plasmid DNA in this population of E. coli HB101 due to transposition of IS1 from the bacterial chromosome into the aminoterminal region of the tet gene of pAT153. This plasmid, pLCX1, when isolated and retransformed into E. coli HB101, was more stably maintained than pAT153. Similar plasmids have been isolated from other glucose, phosphate, ammonium and sulphate-limited chemostats.     

Localization of a pyrroloquinoline quinone biosynthesis gene near the methanol dehydrogenase structural gene in Methylobacterium organophilum DSM 760

A partial Sau3AI genomic bank of Methylobacterium organophilum DSM 760 was constructed in the cosmid pSUP106 and moxF, the structural gene for methanol dehydrogenase, was isolated. In M. organophilum, pSUP106 behaves as a suicide plasmid. This property was used to insert Tn5 into the bacterial chromosome, in the vicinity of moxF, by marker exchange. Mobilization of the Tn5-labelled chromosomal region by a broad-host-range plasmid, pJB3J1 (an R68-45 derivative), allowed the selection of several large R' hybrid plasmids in Escherichia coli HB101. Most of them were able to complement both mutants of the moxF region and mutant MTM1, the first mutant of the pyrroloquinoline quinone (PQQ) biosynthesis pathway in M. organophilum. The gene involved, pqqA, was subcloned and localized.     

盐生盐杆菌RM07 DNA片段在大肠杆菌中的定点诱变和启动子功能分析

将来源于嗜盐古生菌——盐生盐杆菌(Halobacterium halobium)基因组的RM07 DNA片段以正反两个方向分别插入大肠杆菌启动子探针载体pKK232-8携带的报告基因——氯霉素抗性基因(cat)的上游,得到RM07-cat融合的质粒pRM07-1( )和pRM07-1(-),将其分别转入大肠杆菌HB101,进而检测了不同转化子菌株的氯霉素抗性水平和细胞内氯霉素乙酰转移酶蛋白质浓度。结果表明：正向的RM07片段在真细菌(大肠杆菌)中具有启动子活性,能够驱动cat报告基因的表达;而反向的RM07片段在大肠杆菌中不具有启动子活性。对RM07片段进行了定点诱变分析,检测了特定核苷酸突变对启动子活性的影响,结果进一步精确定位了RM07片段中对在大肠杆菌中的启动子功能有重要作用的关键碱基,并且通过改造RM07片段的碱基组成成分大幅提高了其在大肠杆菌中的启动子活性。