Line FRAP with the confocal laser scanning microscope for diffusion measurements in small regions of 3-D samples

We present a truly quantitative fluorescence recovery after photobleaching (FRAP) model for use with the confocal laser scanning microscope based on the photobleaching of a long line segment. The line FRAP method is developed to complement the disk FRAP method reported before. Although being more subject to the influence of noise, the line FRAP model has the advantage of a smaller bleach region, thus allowing for faster and more localized measurements of the diffusion coefficient and mobile fraction. The line FRAP model is also very well suited to examine directly the influence of the bleaching power on the effective bleaching resolution. We present the outline of the mathematical derivation, leading to a final analytical expression to calculate the fluorescence recovery. We examine the influence of the confocal aperture and the bleaching power on the measured diffusion coefficient to find the optimal experimental conditions for the line FRAP method. This will be done for R-phycoerythrin and FITC-dextrans of various molecular weights. The ability of the line FRAP method to measure correctly absolute diffusion coefficients in three-dimensional samples will be evaluated as well. Finally we show the application of the method to the simultaneous measurement of free green fluorescent protein diffusion in the cytoplasm and nucleus of living A549 cells.     

Intracellular macromolecular mobility measured by fluorescence recovery after photobleaching with confocal laser scanning microscopes

Fluorescence recovery after photobleaching (FRAP) is a widely used tool for estimating mobility parameters of fluorescently tagged molecules in cells. Despite the widespread use of confocal laser scanning microscopes (CLSMs) to perform photobleaching experiments, quantitative data analysis has been limited by lack of appropriate practical models. Here, we present a new approximate FRAP model for use on any standard CLSM. The main novelty of the method is that it takes into account diffusion of highly mobile molecules during the bleach phase. In fact, we show that by the time the first postbleach image is acquired in a CLSM a significant fluorescence recovery of fast-moving molecules has already taken place. The model was tested by generating simulated FRAP recovery curves for a wide range of diffusion coefficients and immobile fractions. The method was further validated by an experimental determination of the diffusion coefficient of fluorescent dextrans and green fluorescent protein. The new FRAP method was used to compare the mobility rates of fluorescent dextrans of 20, 40, 70, and 500 kDa in aqueous solution and in the nucleus of living HeLa cells. Diffusion coefficients were lower in the nucleoplasm, particularly for higher molecular weight dextrans. This is most likely caused by a sterical hindrance effect imposed by nuclear components. Decreasing the temperature from 37 to 22 degrees C reduces the dextran diffusion rates by approximately 30% in aqueous solution but has little effect on mobility in the nucleoplasm. This suggests that spatial constraints to diffusion of dextrans inside the nucleus are insensitive to temperature.     

Measurement of molecular diffusion in solution by multiphoton fluorescence photobleaching recovery

Multiphoton fluorescence photobleaching recovery (MP-FPR) is a technique for measuring the three-dimensional (3D) mobility of fluorescent molecules with 3D spatial resolution of a few microns. A brief, intense flash of mode-locked laser light pulses excites fluorescent molecules via multiphoton excitation in an ellipsoidal focal volume and photobleaches a fraction. Because multiphoton excitation of fluorophores is intrinsically confined to the high-intensity focal volume of the illuminating beam, the bleached region is restricted to a known, three-dimensionally defined volume. Fluorescence in this focal volume is measured with multiphoton excitation, using the attenuated laser beam to measure fluorescence recovery as fresh unbleached dye diffuses in. The time course of the fluorescence recovery signal after photobleaching can be analyzed to determine the diffusion coefficient of the fluorescent species. The mathematical formulas used to fit MP-FPR recovery curves and the techniques needed to properly utilize them to acquire the diffusion coefficients of fluorescently labeled molecules within cells are presented here. MP-FPR is demonstrated on calcein in RBL-2H3 cells, using an anomalous subdiffusion model, as well as in aqueous solutions of wild-type green fluorescent protein, yielding a diffusion coefficient of 8.7 x 10(-7) cm(2)s(-1) in excellent agreement with the results of other techniques.     

A Generalization of Theory for Two-Dimensional Fluorescence Recovery after Photobleaching Applicable to Confocal Laser Scanning Microscopes

Fluorescence recovery after photobleaching (FRAP) using confocal laser scanning microscopes (confocal FRAP) has become a valuable technique for studying the diffusion of biomolecules in cells. However, two-dimensional confocal FRAP sometimes yields results that vary with experimental setups, such as different bleaching protocols and bleaching spot sizes. In addition, when confocal FRAP is used to measure diffusion coefficients (D) for fast diffusing molecules, it often yields D-values that are one or two orders-of-magnitude smaller than that predicted theoretically or measured by alternative methods such as fluorescence correlation spectroscopy. Recently, it was demonstrated that this underestimation of D can be corrected by taking diffusion during photobleaching into consideration. However, there is currently no consensus on confocal FRAP theory, and no efforts have been made to unify theories on conventional and confocal FRAP. To this end, we generalized conventional FRAP theory to incorporate diffusion during photobleaching so that analysis by conventional FRAP theory for a circular region of interest is easily applicable to confocal FRAP. Finally, we demonstrate the accuracy of these new (to our knowledge) formulae by measuring D for soluble enhanced green fluorescent protein in aqueous glycerol solution and in the cytoplasm and nucleus of COS7 cells.     

Diffusion of green fluorescent protein in three cell environments in Escherichia coli

Surprisingly little is known about the physical environment inside a prokaryotic cell. Knowledge of the rates at which proteins and other cell components can diffuse is crucial for the understanding of a cell as a physical system. There have been numerous measurements of diffusion coefficients in eukaryotic cells by using fluorescence recovery after photobleaching (FRAP) and related techniques. Much less information is available about diffusion coefficients in prokaryotic cells, which differ from eukaryotic cells in a number of significant respects. We have used FRAP to observe the diffusion of green fluorescent protein (GFP) in cells of Escherichia coli elongated by growth in the presence of cephalexin. GFP was expressed in the cytoplasm, exported into the periplasm using the twin-arginine translocation (Tat) system, or fused to an integral plasma membrane protein (TatA). We show that TatA-GFP diffuses in the plasma membrane with a diffusion coefficient comparable to that of a typical eukaryotic membrane protein. A previous report showed a very low rate of protein diffusion in the E. coli periplasm. However, we measured a GFP diffusion coefficient only slightly smaller in the periplasm than that in the cytoplasm, showing that both cell compartments are relatively fluid environments.     

Developmental changes in the lateral diffusion of Leydig cell membranes measured by the FRAP method

A simple method for isolation and fluorescence labelling of Leydig cells (L-cells) from rat testes was developed. Lateral diffusion coefficients of both lipid and protein membrane fluorescent probes were measured by the method of fluorescence recovery after photobleaching (FRAP). Age-dependent changes in diffusibility of membrane lipids and proteins were discovered.     

Determining diffusion coefficients in inhomogeneous tissues using fluorescence recovery after photobleaching

Diffusion plays an important role in the transport of nutrients and signaling molecules in cartilaginous tissues. Diffusion coefficients can be measured by fluorescence recovery after photobleaching (FRAP). Available methods to analyze FRAP data, however, assume homogeneity in the environment of the bleached area and neglect geometrical restrictions to diffusion. Hence, diffusion coefficients in inhomogeneous materials, such as most biological tissues, cannot be assessed accurately. In this study, a new method for analyzing data from FRAP measurements has been developed, which is applicable to inhomogeneous tissues. It is based on a fitting procedure of the intensity recovery after photobleaching with a two-dimensional finite element analysis, which includes Fick's law for diffusion. The finite element analysis can account for distinctive diffusivity in predefined zones, which allows determining diffusion coefficients in inhomogeneous samples. The method is validated theoretically and experimentally in both homogeneous and inhomogeneous tissues and subsequently applied to the proliferation zone of the growth plate. Finally, the importance of accounting for inhomogeneities, for appropriate assessment of diffusivity in inhomogeneous tissues, is illustrated.     

FRAP analysis of membrane-associated proteins: lateral diffusion and membrane-cytoplasmic exchange

Obtaining quantitative kinetic parameters from fluorescence recovery after photobleaching (FRAP) experiments generally requires a theoretical analysis of protein mobility and appropriate solutions for FRAP recovery derived for a given geometry. Here we provide a treatment of FRAP recovery for a molecule undergoing a combined process of reversible membrane association and lateral diffusion on the plasma membrane for two commonly used bleach geometries: stripes, and boxes. Such analysis is complicated by the fact that diffusion of a molecule during photobleaching can lead to broadening of the bleach area, resulting in significant deviations of the actual bleach shape from the desired bleach geometry, which creates difficulty in accurately measuring kinetic parameters. Here we overcome the problem of deviations between actual and idealized bleach geometries by parameterizing, more accurately, the initial postbleach state. This allows for reconstruction of an accurate and analytically tractable approximation of the actual fluorescence distribution. Through simulated FRAP experiments, we demonstrate that this method can be used to accurately measure a broad range of combinations of diffusion constants and exchange rates. Use of this method to analyze the plextrin homology domain of PLC-δ1 in Caenorhabditis elegans results in quantitative agreement with prior analysis of this domain in other cells using other methods. Because of the flexibility, relative ease of implementation, and its use of standard, easily obtainable bleach geometries, this method should be broadly applicable to investigation of protein dynamics at the plasma membrane.     

From fixed to FRAP: measuring protein mobility and activity in living cells

Experiments with fluorescence recovery after photobleaching (FRAP) started 30 years ago to visualize the lateral mobility and dynamics of fluorescent proteins in living cells. Its popularity increased when non-invasive fluorescent tagging became possible with the green fluorescent protein (GFP). Many researchers use GFP to study the localization of fusion proteins in fixed or living cells, but the same fluorescent proteins can also be used to study protein mobility in living cells. Here we review the potential of FRAP to study protein dynamics and activity within a single living cell. These measurements can be made with most standard confocal laser-scanning microscopes equipped with photobleaching protocols.     

Simplified Equation to Extract Diffusion Coefficients from Confocal FRAP Data

Quantitative measurements of diffusion can provide important information about how proteins and lipids interact with their environment within the cell and the effective size of the diffusing species. Confocal fluorescence recovery after photobleaching (FRAP) is one of the most widely accessible approaches to measure protein and lipid diffusion in living cells. However, straightforward approaches to quantify confocal FRAP measurements in terms of absolute diffusion coefficients are currently lacking. Here, we report a simplified equation that can be used to extract diffusion coefficients from confocal FRAP data using the half time of recovery and effective bleach radius for a circular bleach region, and validate this equation for a series of fluorescently labeled soluble and membrane‐bound proteins and lipids. We show that using this approach, diffusion coefficients ranging over three orders of magnitude can be obtained from confocal FRAP measurements performed under standard imaging conditions, highlighting its broad applicability.     

Analysis of fluorophore diffusion by continuous distributions of diffusion coefficients: application to photobleaching measurements of multicomponent and anomalous diffusion.

Fluorescence recovery after photobleaching (FRAP) is widely used to measure fluorophore diffusion in artificial solutions and cellular compartments. Two new strategies to analyze FRAP data were investigated theoretically and applied to complex systems with anomalous diffusion or multiple diffusing species: 1) continuous distributions of diffusion coefficients, alpha(D), and 2) time-dependent diffusion coefficients, D(t). A regression procedure utilizing the maximum entropy method was developed to resolve alpha(D) from fluorescence recovery curves, F(t). The recovery of multi-component alpha(D) from simulated F(t) with random noise was demonstrated and limitations of the method were defined. Single narrow Gaussian alpha(D) were recovered for FRAP measurements of thin films of fluorescein and size-fractionated FITC-dextrans and Ficolls, and multi-component alpha(D) were recovered for defined fluorophore mixtures. Single Gaussian alpha(D) were also recovered for solute diffusion in viscous media containing high dextran concentrations. To identify anomalous diffusion from FRAP data, a theory was developed to compute F(t) and alpha(D) for anomalous diffusion models defined by arbitrary nonlinear mean-squared displacement <x2> versus time relations. Several characteristic alpha(D) profiles for anomalous diffusion were found, including broad alpha(D) for subdiffusion, and alpha(D) with negative amplitudes for superdiffusion. A method to deduce apparent D(t) from F(t) was also developed and shown to provide useful complementary information to alpha(D). alpha(D) and D(t) were determined from photobleaching measurements of systems with apparent anomalous subdiffusion (nonuniform solution layer) and superdiffusion (moving fluid layer). The results establish a practical strategy to characterize complex diffusive phenomena from photobleaching recovery measurements.     

Fluorescence recovery after photobleaching (FRAP) experiments under conditions of uniform disk illumination. Critical comparison of analytical solutions, and a new mathematical method for calculation of diffusion coefficient D.

A simple fluorescence recovery after photobleaching (FRAP) apparatus using a fluorescence microscope with a conventional mercury arc lamp, working under conditions of "uniform disk illumination" is described. This set-up was designed essentially for the use of anthracene as fluorescent probe, which is bleached (photodimerization reaction) by illumination in the near ultraviolet range (360 nm). It is shown that the lateral diffusion coefficients D can be readily calculated from fluorescence recovery curves using a finite differentiate method in combination with statistical analysis of the data. In contrast to the analytical solutions so far described, this numerical approach is particularly versatile. With a minimization algorithm, D and the probe mobile fraction can be readily calculated for any recovery time under various experimental conditions. These include different probe concentration profiles in the illuminated area after the bleaching step, and situations of infinite or noninfinite reservoir in the diffusion area outside the illuminated area.     

Fluorescence recovery after photobleaching as a probe of diffusion in starch systems

The diffusion coefficients of dextran probes of various molecular weights in starch solutions over a wide concentration range were carried out using fluorescent recovery after photobleaching (FRAP), combined with a confocal microscope and tracer probe diffusion. The technique is simple to implement and can be carried out using increasingly common microscopy apparatus, giving access to a wide variety of new structural and kinetic information. The data can be rationalized in terms of the effects of probe molecular weight and on matrix starch concentration and structure. This provides a new tool to investigate the behavior of systems where starch is an ingredient that contributes to the processing and textural properties of food.     

Measurement of normal and anomalous diffusion of dyes within protein structures fabricated via multiphoton excited cross-linking

We demonstrate microscale spatial and chemical control of diffusion within protein matrixes created through the use of nonlinear multiphoton excited photochemistry. The mobility of fluorescent dyes of different mass and composition within controlled cross-linked environments has been measured using two-photon excited fluorescence recovery after photobleaching (FRAP). The diffusion times for several rhodamine and sulforhodamine dyes within these fabricated structures were found to be approximately 3-4 orders of magnitude slower than in free solution. The precise diffusion times can be tuned by varying the laser exposure during the fabrication of the matrix, and the diffusion can be correlated with the mesh size determined by TEM and Flory-Rehner analysis. We find that the hydrophobic Texas Red dyes (sulforhodamines) exhibit diffusion that is highly anomalous, indicative of a strong interaction with the hydrophobic cross-linked protein matrix. These results suggests the use of these cross-linked protein matrixes as ideal model systems in which to systematically study anomalous diffusion. Finally, the diffusion can be tuned within a multilayered protein matrix, and this in conjunction with slow diffusion also suggests the use of these structures in controlled release applications.     

Challenges and artifacts in quantitative photobleaching experiments

Confocal fluorescence recovery after photobleaching (FRAP) is today the prevalent tool when studying the diffusional and kinetic properties of proteins in living cells. Obtaining quantitative data for diffusion coefficients via FRAP, however, is challenged by the fact that both bleaching and scanning take a finite time. Starting from an experimental case, it is shown by means of computer simulations that this intrinsic temporal limitation can lead to a gross underestimation of diffusion coefficients. Determining the binding kinetics of proteins to membranes with FRAP is further shown to be severely hampered by additional diffusional contributions, e.g. diffusion-limited binding. In some cases, the binding kinetics may even be masked entirely by diffusion. As current efforts to approach biological problems with biophysical models have to rely on experimentally determined model parameters, e.g. binding rates and diffusion constants, it is proposed that the accuracy in evaluating FRAP measurements can be improved by means of accompanying computer simulations.     

Effects of organelle shape on fluorescence recovery after photobleaching

The determination of diffusion coefficients from fluorescence recovery data is often complicated by geometric constraints imposed by the complex shapes of intracellular compartments. To address this issue, diffusion of proteins in the lumen of the endoplasmic reticulum (ER) is studied using cell biological and computational methods. Fluorescence recovery after photobleaching (FRAP) experiments are performed in tissue culture cells expressing GFP-KDEL, a soluble, fluorescent protein, in the ER lumen. The three-dimensional (3D) shape of the ER is determined by confocal microscopy and computationally reconstructed. Within these ER geometries diffusion of solutes is simulated using the method of particle strength exchange. The simulations are compared to experimental FRAP curves of GFP-KDEL in the same ER region. Comparisons of simulations in the 3D ER shapes to simulations in open 3D space show that the constraints imposed by the spatial confinement result in two- to fourfold underestimation of the molecular diffusion constant in the ER if the geometry is not taken into account. Using the same molecular diffusion constant in different simulations, the observed speed of fluorescence recovery varies by a factor of 2.5, depending on the particular ER geometry and the location of the bleached area. Organelle shape considerably influences diffusive transport and must be taken into account when relating experimental photobleaching data to molecular diffusion coefficients. This novel methodology combines experimental FRAP curves with high accuracy computer simulations of diffusion in the same ER geometry to determine the molecular diffusion constant of the solute in the particular ER lumen.     

k-Space image correlation spectroscopy: a method for accurate transport measurements independent of fluorophore photophysics

We present the theory and application of reciprocal space image correlation spectroscopy (kICS). This technique measures the number density, diffusion coefficient, and velocity of fluorescently labeled macromolecules in a cell membrane imaged on a confocal, two-photon, or total internal reflection fluorescence microscope. In contrast to r-space correlation techniques, we show kICS can recover accurate dynamics even in the presence of complex fluorophore photobleaching and/or "blinking". Furthermore, these quantities can be calculated without nonlinear curve fitting, or any knowledge of the beam radius of the exciting laser. The number densities calculated by kICS are less sensitive to spatial inhomogeneity of the fluorophore distribution than densities measured using image correlation spectroscopy. We use simulations as a proof-of-principle to show that number densities and transport coefficients can be extracted using this technique. We present calibration measurements with fluorescent microspheres imaged on a confocal microscope, which recover Stokes-Einstein diffusion coefficients, and flow velocities that agree with single particle tracking measurements. We also show the application of kICS to measurements of the transport dynamics of alpha5-integrin/enhanced green fluorescent protein constructs in a transfected CHO cell imaged on a total internal reflection fluorescence microscope using charge-coupled device area detection.     

The effect of ligand affinity on integrins’ lateral diffusion in cultured cells

The role of ligand affinity in altering αPS2CβPS integrins’ lateral mobility was studied using single particle tracking (SPT) with ligand-functionalized quantum dots (QDs) and fluorescence recovery after photobleaching (FRAP) with fluorescent protein tagged integrins. Integrins are ubiquitous transmembrane proteins that are vital for numerous cellular functions, including bidirectional signaling and cell anchorage. Wild-type and high ligand affinity mutant (αPS2CβPS-V409D) integrins were studied in S2 cells. As measured by SPT, the integrin mobile fraction decreased by 22 % and had a 4× slower diffusion coefficient for αPS2CβPS-V409D compared to wild-type integrins. These differences are partially the result of αPS2CβPS-V409D integrins’ increased clustering. For the wild-type integrins, the average of all diffusion coefficients measured by SPT was statistically similar to the ensemble FRAP results. A 75 % slower average diffusion coefficient was measured by SPT compared to FRAP for αPS2CβPS-V409D integrins, and this may be the result of SPT measuring only ligand-bound integrins, in contrast all ligand-bound and ligand-unbound integrins are averaged in FRAP measurements. Specific binding of the ligand-functionalized QDs was 99 % for integrin expressing cells. The results prove that the ligand binding affinity affects the lateral dynamics of a subset of integrins based on the complementary SPT and FRAP data.     

Spatial Fourier analysis of video photobleaching measurements. Principles and optimization.

The major use of the fluorescence recovery after photobleaching (FRAP) technique is to measure the translational motion of the molecular components in various condensed media. In a conventional laser spot photobleaching experiment, a photomultiplier is used to measure the total brightness levels of the bleached region in the sample, so no spatial information can be directly obtained. In video-FRAP, a series of images after photobleaching is acquired, allowing the spatial character of the recovery to be determined; this permits direct detection of both anisotropic diffusion and flow. To utilize all of the available image data to determine the transport coefficients, a two-dimensional spatial Fourier transform analysis of the images after photobleaching was employed. The change in the transform between two time points reflects the action of diffusion during the interim. An important advantage of this method, which involves taking the ratio of image transforms at different time points, is that it does not require a specific initial condition to be created by laser photobleaching. The ability of the analysis to extract transport coefficients from computer-simulated diffusional recovery is assessed in the presence of increasing amounts of noise. Experimental data analysis from the diffusion of proteins in viscous solutions and from the diffusion of protein receptors on cell surfaces demonstrate the feasibility of the Fourier analysis to obtain transport coefficients from the video FRAP measurement.