Carbon nanotube-enhanced DNA biosensor for DNA hybridization detection using manganese(II)-Schiff base complex as hybridization indicator

A Mn(II) complex, MnL (L = sodium (E)-3-((1-carboxyethylimino)methyl)-4-hydroxybenzenesulfonate), was synthesized and characterized using elemental analysis and IR spectroscopy. Cyclic voltammetry (CV) and fluorescence spectroscopy were used to investigate the interaction between MnL and salmon sperm DNA. It was revealed that MnL presented high electrochemical activity on glassy carbon electrode (GCE), and it could be intercalated into the double helices of double-stranded DNA (dsDNA). Using MnL as the hybridization indicator, a novel and sensitive electrochemical DNA biosensor based on multiwall carbon nanotubes functionalized with carboxyl groups (MWCNTs-COOH, on which DNA probes were covalently immobilized) was prepared. The target single-stranded DNA (ssDNA) could be quantified ranging from 6.7 × 10⁻¹⁰ M to 8.4 × 10⁻⁹ M with good linearity (r = 0.9922). A detection limit of 1.4 × 10⁻¹⁰ M (3σ, n = 9) was achieved.     

Electrochemical spectroscopic investigations on the interaction of an ytterbium complex with DNA and their analytical applications such as biosensor

Metal ion-DNA interactions are important in nature, often changing the genetic material's structure and function. A new Yb complex of YbCl₃ (tris(8-hydroxyquinoline-5-sulfonic acid) ytterbium) was synthesized and utilized as an electrochemical indicator for the detection of DNA oligonucleotide based on its interaction with Yb(QS)₃. Cyclic voltammetry (CV) and fluorescence spectroscopy were used to investigate the interaction of Yb(QS)₃ with ds-DNA. It was revealed that Yb(QS)₃ presented an excellent electrochemical activity on glassy carbon electrode (GCE) and could intercalate into the double helix of double-stranded DNA (ds-DNA). The binding mechanism of interaction was elucidated on glassy carbon electrode dipped in DNA solution and DNA modified carbon paste electrode by using differential pulse voltammetry and cyclic voltammetry. The binding ratio between this complex and ds-DNA was calculated to be 1:1. The extent of hybridization was evaluated on the basis of the difference between signals of Yb(QS)₃ with probe DNA before and after hybridization with complementary DNA. With this approach, this DNA could be quantified over the range from 1 × 10⁻⁸ to 1.1 × 10⁻⁷ M. The interaction mode between Yb(QS)₃ and DNA was found to be mainly intercalative interaction. These results were confirmed with fluorescence experiments.     

Electrochemical synthesis of gold nanostructure modified electrode and its development in electrochemical DNA biosensor

In this article, gold nanostructure modified electrodes were achieved by a simple one-step electrodeposition method. The morphologies of modified electrodes could be easily controlled by changing the pH of HAuCl₄ solution. The novel nanoflower-like particles with the nanoplates as the building blocks could be interestingly obtained at pH 5.0. The gold nanoflower modified electrodes were then used for the fabrication of electrochemical DNA biosensor. The DNA biosensor fabrication process was characterized by cyclic voltammetry and electrochemical impedance spectroscopy with the use of ferricyanide as an electrochemical redox indicator. The DNA immobilization and hybridization on gold nanoflower modified electrode was studied with the use of [Ru(NH₃)₆]³⁺ as a hybridization indicator. The electrochemical DNA biosensor shows a good selectivity and sensitivity toward the detection of target DNA. A detection limit of 1 pM toward target DNA could be obtained.     

Electrochemical DNA biosensor for the study of ciprofloxacin-DNA interaction

The interaction of ciprofloxacin with DNA was studied by using an electrochemical DNA biosensor. The binding mechanism of ciprofloxacin was elucidated by using constant current potentiometry and differential pulse voltammetry at DNA-modified glassy carbon electrode. The decrease in the guanine oxidation peak area or peak current at +0.9 V was used as an indicator for the interaction mechanism in 0.2M acetate buffer (pH 5). The binding constant (K) values obtained were 1.33+/-0.02 x 10(4) and 1.32+/-0.08 x 10(4) M(-1) with constant current potentiometry and differential pulse voltammetry, respectively. A linear dependence of the guanine peak area or peak currents was observed in the range of 40-80 microM ciprofloxacin, with a detection limit of 24 microM with r=0.995 and 9 microM with r=0.999 by using constant current potentiometry and differential pulse voltammetry, respectively. Moreover, the influence of sodium and calcium ions was also studied to elucidate the mechanism of ciprofloxacin-DNA interaction at different solution conditions, and this proved to be helpful in understanding the ciprofloxacin-DNA interaction.     

Electrochemical biosensor evaluation of the interaction between DNA and metallo-drugs

Electrochemical techniques were used to study the interaction between a panel of antiproliferative metallo-drugs and double-stranded DNA immobilized on screen-printed electrodes as a model of the analogous interaction occurring in solution. The propensity of a given metal drug to interact with DNA was measured as a function of the decrease of guanine oxidation signal, which was detected by square wave voltammetry. Estimates of variations in experimental parameters, such as the concentration of complexes, time following dissolution (ageing time) and the presence of chloride, are provided. Presented at the IV Symposium on Pharmaco-Bio- Metallics, October, 29–31, 2004, Lecce (Italy)     

Evaluation of the analytical performances of avidin-modified carbon sensors based on a mediated horseradish peroxidase enzyme label and their application to the amperometric detection of nucleic acids

In this study, neutravidin-coated screen-printed carbon sensors were fully characterized and further used for the amperometric detection of specific DNA sequences of human cytomegalovirus (HCMV DNA). For this purpose, we took advantage of an earlier established relationship between the amount of HRP affinity immobilized on the surface of the electrode and the steady-state current recorded in the presence of H₂O₂ as substrate and the single electron donor [Os^III(bpy)₂pyCl]²⁺ as cosubstrate. After incubating a saturating concentration of biotinylated horseradish peroxidase (Bio-HRP) onto the neutravidin-modified sensors, a surface concentration of active HRP of 3.6 pmol cm⁻² was calculated from the measurement of the electrocatalytic plateau current value. This result indicates that monolayers of neutravidin were adsorbed on the screen-printed carbon sensors. These neutravidin-covered platforms were then used to immobilize biotinylated nucleic acid targets. After hybridization with a complementary digoxigenin-labeled detection probe, the extent of hybrids formed was determined with an anti-digoxigenin HRP conjugate. The biosensor assay was applied to the detection of a synthetic oligonucleotide target, and then to the determination of an amplified viral DNA sequence. Monolayers of HRP-labeled oligonucleotide hybrids were immobilized onto the sensing surface whereas one third of the surface was covered with HCMV DNA hybrids. On the other hand, detection limits of 200 pM and 1 nM were obtained for the short oligonucleotide and the longer DNA targets, respectively. Finally, we demonstrated that the sensitivity of the electrochemical assay could be significantly improved by using high concentrations of the reduced form of the mediator [Os^II(bpy)₂pyCl]⁺, thus allowing one to detect as low as 30 pM of amplified HCMV DNA fragment.     

[Cu(phen)2] acts as electrochemical indicator and anchor to immobilize probe DNA in electrochemical DNA biosensor

We demonstrate a novel protocol for sensitive in situ label-free electrochemical detection of DNA hybridization based on copper complex ([Cu(phen)₂]²⁺, where phen = 1,10-phenanthroline) and graphene (GR) modified glassy carbon electrode. Here, [Cu(phen)₂]²⁺ acted advantageously as both the electrochemical indicator and the anchor for probe DNA immobilization via intercalative interactions between the partial double helix structure of probe DNA and the vertical aromatic groups of phen. GR provided large density of docking site for probe DNA immobilization and increased the electrical conductivity ability of the electrode. The modification procedure was monitored by electrochemical impedance spectroscopy (EIS). Square-wave voltammetry (SWV) was used to explore the hybridization events. Under the optimal conditions, the designed electrochemical DNA biosensor could effectively distinguish different mismatch degrees of complementary DNA from one-base mismatch to noncomplementary, indicating that the biosensor had high selectivity. It also exhibited a reasonable linear relationship. The oxidation peak currents of [Cu(phen)₂]²⁺ were linear with the logarithm of the concentrations of complementary target DNA ranging from 1 × 10⁻¹² to 1 × 10⁻⁶ M with a detection limit of 1.99 × 10⁻¹³ M (signal/noise = 3). Moreover, the stability of the electrochemical DNA biosensor was also studied.     

A simple colorimetric DNA detection by target-induced hybridization chain reaction for isothermal signal amplification

A novel DNA detection method is presented based on a gold nanoparticle (AuNP) colorimetric assay and hybridization chain reaction (HCR). In this method, target DNA hybridized with probe DNA modified on AuNP, and triggered HCR. The resulting HCR products with a large number of negative charges significantly enhanced the stability of AuNPs, inhibiting aggregation of AuNPs at an elevated salt concentration. The approach was highly sensitive and selective. Using this enzyme-free and isothermal signal amplification method, we were able to detect target DNA at concentrations as low as 0.5 nM with the naked eye. Our method also has great potential for detecting other analytes, such as metal ions, proteins, and small molecules, if the target analytes could make HCR products attach to AuNPs.     

Electrochemically fabricated polypyrrole nanofiber-modified electrode as a new electrochemical DNA biosensor

A new biosensor employing immobilized DNA on a nano-structured conductive polymer fixed onto a platinum electrode is presented. Upon optimization of synthesis parameters, polypyrrole nanofibers, 30-90 nm in diameter, were synthesized in an aqueous media by the electropolymerization of pyrrole using normal pulse voltammetry (NPV). The nanofiber film was investigated by scanning electron microscopy (SEM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Double-stranded DNA was physisorbed onto the PPy nanofiber films. Various parameters, including the pH and DNA concentration, were optimized. The DNA immobilized on the nanofiber films was characterized using differential pulse voltammetry (DPV) and Fourier-transform infrared (FTIR) spectroscopy. Using DPV to study the interaction of spermidine with DNA, a binding constant (K) value of 4.08 x 10(5)+/-0.05 M(-1) was obtained. For the determination of spermidine, the proposed method exhibited a good dynamic range, correlation coefficient (0.05-1.0 microM and 0.9983, respectively) and a low detection limit (0.02 microM), although Ca(2+) ions were found to electrostatically bind to DNA and weaken the spermidine-DNA interaction.     

Design and construction of novel molecular conjugates for signal amplification (I): conjugation of multiple horseradish peroxidase molecules to immunoglobulin via primary amines on lysine peptide chains

Immunoconjugates are widely used for indirect detection of analytes (such as antibodies or antigens) in a variety of immunoassays. However, the availability of functional groups such as primary amines or free sulfhydryls in an immunoglobulin molecule is the limiting factor for optimal conjugation and, therefore, determines the sensitivity of an assay. In the present study, an N-terminal bromoacetylated 20 amino acid peptide containing 20 lysine residues was conjugated to N-succinimidyl-S-acetylthioacetate (SATA)-modified IgG or free sulfhydryl groups on 2-mercaptoethylamine (2-MEA)-reduced IgG molecules via a thioether (S---CH₂CONH) linkage to introduce multiple reactive primary amines per IgG. These primary amines were then covalently coupled with maleimide-activated horseradish peroxidase (HRP). The poly-HRP–antibody conjugates thus generated demonstrated greater than 15-fold signal amplification upon reaction with orthophenyldiamine substrate. The poly-HRP–antibody conjugates efficiently detected human immunodeficiency virus (HIV)-1 antibodies in plasma specimens with significantly higher sensitivity than conventionally prepared HRP–antibody conjugates in an HIV-1 solid-phase enzyme immunoassay and Western blot analysis. The signal amplification techniques reported here could have the potential for development of highly sensitive immunodiagnostic assay systems.     

Selective detection of silver ions using mushroom-like polyaniline and gold nanoparticle nanocomposite-based electrochemical DNA sensor

A highly sensitive electrochemical DNA biosensor made of polyaniline (PANI) and gold nanoparticles (AuNPs) nanocomposite (AuNPs@PANI) has been used for the detection of trace concentration of Ag⁺. In the presence of Ag⁺, with the interaction of cytosine–Ag⁺–cytosine (C–Ag⁺–C), cytosine-rich DNA sequence immobilized onto the surface of AuNPs@PANI has a self-hybridization and then forms a duplex-like structure. The whole detection procedure of Ag⁺ based on the developed biosensor was evaluated by electrochemical impedance spectroscopy. On semi-logarithmic plots of the log Ag⁺ concentration versus peak current, the results show that the prepared biosensor can detect silver ions at a wide linear range of 0.01–100 nM (R = 0.9828) with a detection limit of 10 pM (signal/noise = 3). Moreover, the fabricated sensor exhibits good selectivity and repeatability. The detection of Ag⁺ was determined by Ag⁺ self-induced conformational change of DNA scaffold that involved only one oligonucleotide, showing its convenience and availability.     

Using enzymatic amplification by aldolase for the optical detection of DNA by an artificial signal cascade

A two-step reaction cascade is applied to the sequence-specific detection of single-stranded DNA, including analyte-triggered re-activation of apo-aldolase by its cofactor Zn²⁺ and catalytic conversion of a chromophore.     

An amperometric biosensor fabricated from electro-co-deposition of sodium alginate and horseradish peroxidase

A convenient and effective strategy for fabrication of hydrogen peroxide biosensor based on sodium alginate (SA) and polyvinyl butyral (PVB) as matrices was reported in this paper. The horseradish peroxidase (HRP) and SA were electro-co-deposited onto the surface of gold electrode, and the HRP–SA/Au electrode was further coated with PVB. The interaction between HRP and SA was characterized by UV–vis absorption spectroscopy, and the fabricating process of biosensor was characterized by electrochemical impedance spectroscopy (EIS). The electrochemical characteristics of the biosensor were studied by cyclic voltammetry and chronoamperometry. Experimental conditions were investigated which influence the performance of the biosensor, such as pH, and applied potential. The biosensor showed a linear response to H₂O₂ over a concentration range from 7.0 × 10⁻⁶ to 4.1 × 10⁻³ M with a detection limit of 1.8 × 10⁻⁶ M based on a signal-to-noise ratio of 3 under optimum conditions. The value of HRP in the composite was evaluated to be 1.38 mM. The biosensor obtained from this study possesses high sensitivity, good reproducibility, and long-term stability.     

Electrochemical impedance behavior of DNA biosensor based on colloidal Ag and bilayer two-dimensional sol-gel as matrices

A novel method for fabrication of DNA biosensors has been developed by means of self-assembling colloidal Ag (Ag) to a thiol-containing sol-gel network. The thiol groups of 3-mercaptopropyltrimethoxysilane (MPTS) serve as binding sites for the covalent attachment to gold electrode surface. Then the one-dimensional network of silane unites (1dMPTS) was combined together into a two-dimensional sol-gel network (2dMPTS) by dipping into aqueous NaOH. The second silane layer (B2dMPTS) was formed by immersing electrodes back into the MPTS solution overnight, and then the Ag nanoparticles were chemisorbed onto the thiol groups of the second silane layer. Finally, the mercapto oligonucleotide was self-assembled onto the surface via the Ag nanoparticles. The modified process was characterized by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). In addition, we utilized the impedance spectroscopy as a platform for DNA sensing assay. The factors influencing the performance of the resulting biosensor were studied in detail. The linear range of the biosensor was from 8.0 x 10(-9) to 1.0 x 10(-6) M with a detection limit of 4.0 x 10(-9) M at 3sigma. In addition, the experiment results indicate that oligonucleotide immobilized on this way exhibits a good sensitivity and selectivity, high stability and a long-term maintenance of bioactivity.     

Chemiluminescence enzyme immunoassay of dehydroepiandrosterone and its sulfate using peroxidase as label

We report a highly sensitive enzyme immunoassay for dehydroepiandrosterone (DHEA) and its sulfate (DHEA-S) using horseradish peroxidase as the label enzyme. Separation of free and bound DHEA-peroxidase conjugate was by insolubilized antibody, prepared by coupling purified IgG of goat anti-rabbit IgG serum with Sepharose 4B or a polystyrene tube. The enzyme activity was measured by the chemiluminescence reaction using luminol and hydrogen peroxide as substrate. The faint chemiluminescence was measured by a photon counter. The sensitivity was 25 pg/assay tube for DHEA and 100 pg/assay tube for DHEA-S. Upon comparison, results obtained by radioimmunoassay and this method showed good agreement; r = 0.86 for free DHEA, r = 0.92 for acid-hydrolyzed DHEA-S and r = 0.91 for solvolyzed DHEA-S. The present method is applicable in the routine determination of DHEA and DHEA-S in biological fluid.     

Electrochemical detection of the MT-ND6 gene and its enzymatic digestion: Application in human genomic sample

A simple electrochemical biosensor was developed for the detection of the mitochondrial NADH dehydrogenase 6 gene (MT-ND6) and its enzymatic digestion by BamHI enzyme. This biosensor was fabricated by modification of a glassy carbon electrode with gold nanoparticles (AuNPs/GCE) and a probe oligonucleotide (ssDNA/AuNPs/GCE). The probe, which is a thiolated segment of the MT-ND6 gene, was deposited by self-assembling immobilization on AuNPs/GCE. Two indicators including methylene blue (MB) and neutral red (NR) were used as the electroactive indicators and the electrochemical response of the modified electrode was measured by differential pulse voltammetry. The proposed biosensor can detect the complementary sequences of the MT-ND6 gene. Also the modified electrode was used for the detection of an enzymatic digestion process by BamHI enzyme. The electrochemical biosensor can detect the MT-ND6 gene and its enzymatic digestion in polymerase chain reaction (PCR)-amplified DNA extracted from human blood. Also the biosensor was used directly for detection of the MT-ND6 gene in all of the human genome.     

Rapid detection and identification of a pathogen's DNA using Phi29 DNA polymerase

Zoonotic pathogens including those transmitted by insect vectors are some of the most deadly of all infectious diseases known to mankind. A number of these agents have been further weaponized and are widely recognized as being potentially significant biothreat agents. We describe a novel method based on multiply-primed rolling circle in vitro amplification for profiling genomic DNAs to permit rapid, cultivation-free differential detection and identification of circular plasmids in infectious agents. Using Phi29 DNA polymerase and a two-step priming reaction we could reproducibly detect and characterize by DNA sequencing circular DNA from Borrelia burgdorferi B31 in DNA samples containing as little as 25 pg of Borrelia DNA amongst a vast excess of human DNA. This simple technology can ultimately be adapted as a sensitive method to detect specific DNA from both known and unknown pathogens in a wide variety of complex environments.     

Significant enhancement of fluorescence on hybridization of a molecular beacon to a target DNA in the presence of a site-specific DNA nickase

We have developed a simple isothermal (55 degrees C) reaction that permits detection of DNA targets using only two components: a molecular beacon and a site-specific DNA nickase without deoxyribonucleotide triphosphates and primers. The loop sequence of the molecular beacon should contain a DNA nickase recognition site. The nickase-molecular beacon (NMB) combination permits a 100-fold increase in fluorescent signal. The applications of the NMB assay for enhancement of fluorescent signal in some isothermal methods are discussed.     

Chemiluminescence immunoassay for the rapid and sensitive detection of antibody against porcine parvovirus by using horseradish peroxidase/detection antibody‐coated gold nanoparticles as nanoprobes

A rapid, simple, facile, sensitive and enzyme‐amplified chemiluminescence immunoassay (CLIA) method to detect antibodies against porcine parvovirus has been developed. Horseradish peroxidase (HRP) and the detection antibody were simultaneously co‐immobilized on the surface of gold nanoparticles using the electrostatic method to form gold nanoparticle‐based nanoprobes. This nanoprobe was employed in a sandwich‐type CLIA, which enables CL signal readout from enzymatic catalysis and results in signal amplification. The presence of porcine parvovirus infection was determined in porcine parvovirus antibodies by measuring the CL intensity caused by the reaction of HRP–luminol with H₂O₂. Under optimal conditions, the obtained calibration plot for the standard positive serum was approximately linear within the dilution range of 1:80 to 1:5120. The limit of detection for the assay was 1:10,240 (S/N = 3), which is much lower than that typically achieved with an enzyme‐linked immunosorbent assay (1:160; S/N = 3). A series of repeatability measurements using 1:320‐fold diluted standard positive serum gave reproducible results with a relative standard deviation of 4.9% (n = 11). The ability of the immunosensor to analyze clinical samples was tested on porcine sera. The immunosensor had an efficiency of 90%, a sensitivity of 93.3%, and a specificity of 87.5% relative to the enzyme‐linked immunosorbent assay results. Copyright © 2013 John Wiley & Sons, Ltd.     

Hybridization biosensor using 2-nitroacridone as electrochemical indicator for detection of short DNA species of Chronic Myelogenous Leukemia

A new acridone derivative 2-nitroacridone (NAD) was synthesized in this paper, and it was found that NAD had excellent electrochemical activity on the glassy carbon electrode (GCE) with a couple reversible redox peaks at 0.051 V and 0.103 V, respectively. Voltammetry was used to investigate the electrochemical behavior of NAD and the interaction between NAD and salmon sperm DNA. In pH 4.0 phosphate buffer solution, the binding ratio between NAD and salmon sperm DNA was calculated to be 2:1 and the binding constant was 3.19 × 10⁵ L/mol. A Chronic Myelogenous Leukemia (CML, Type b₃a₂) DNA biosensor was developed by immobilizing covalently single-stranded CML DNA fragments to a modified GCE. The surface hybridization of the immobilized single-stranded CML DNA fragment with its complementary DNA fragment was evidenced by electrochemical methods using NAD as a novel electrochemical indicator, with a detection limit of 6.7 × 10⁻⁹ M and a linear response range of 1.8 × 10⁻⁸ M to 9.1 × 10⁻⁸ M for CML DNA. Selective determination of complementary ssDNA was achieved using differential pulse voltammetry (DPV).