Chemical modification of pyrimidine TFOs: effect on i-motif and triple helix formation

In order to form more stable triple helical structures or to prevent their degradation in cells, oligonucleotide analogs are routinely used, either in the backbone or among the bases. The target sequence chosen for this study is a 16-base-long oligopurine-oligopyrimidine region present in the human neurotrophin 4/5 gene. Seven different chemical modifications were tested for their effect on (i) triple helix formation and (ii) i-DNA stability. i-DNA is a tetrameric structure involving hemiprotonated C x C+ base pairs, which may act as a competing structure for triplex formation, especially in the case of a cytosine-rich third strand. At acid pH, oligophosphoramidates formed the most stable triple helix, whereas oligonucleotides including 5-propynyl-dU formed a stable i-motif which precluded triplex formation. Only two candidates stabilized triple helices at neutral pH: oligonucleotides with phosphoramidate linkage and phosphodiester oligonucleotides containing 5-methyl-dC and 5-propynyl-dU.     

Design and simple routes of synthesis of oligonucleotide conjugates for studies of DNA triple helix formation

A series of oligonucleotides conjugated to intercalators, as well as fluorescent and lipophilic substances, minor groove binders and photoactive molecules were synthesized for studies of their ability to form a stable triple helix. Purine-rich short double stranded DNA fragments from HIV-1 genome and pyrimidine 16-mer oligodeoxyribonucleotide were used as models. A conjugate of a dipyrido[3,2-a:2',3'-c]phenazine-ruthenium (II) complex and a triple helix-forming oligonucleotide was constructed. Upon sequence-specific duplex and triplex formation of the conjugate, the ruthenium complex becomes highly fluorescent. The attached ruthenium complex induces a stabilization of the DNA triple helix and a significant increase of the time of residence of the third strand on the duplex.     

DESIGN AND SIMPLE ROUTES OF SYNTHESIS OF OLIGONUCLEOTIDE CONJUGATES FOR STUDIES OF DNA TRIPLE HELIX FORMATION

A series of oligonucleotides conjugated to intercalators, as well as fluorescent and lipophilic substances, minor groove binders and photoactive molecules were synthesized for studies of their ability to form a stable triple helix. Purine-rich short double stranded DNA fragments from HIV-1 genome and pyrimidine 16-mer oligodeoxyribonucleotide were used as models. A conjugate of a dipyrido[3,2-a:2′,3′-c]phenazine-ruthenium (II) complex and a triple helix-forming oligonucleotide was constructed. Upon sequence-specific duplex and triplex formation of the conjugate, the ruthenium complex becomes highly fluorescent. The attached ruthenium complex induces a stabilization of the DNA triple helix and a significant increase of the time of residence of the third strand on the duplex.     

Triplex formation at physiological pH: comparative studies on DNA triplexes containing 5-Me-dC tethered at N4 with spermine and tetraethyleneoxyamine.

Oligodeoxynucleotides with spermine conjugation at C4 of 5-Me-dC ( sp -ODN) exhibit triple helix formation with complementary Watson-Crick duplexes, and were optimally stable at physiological pH 7.3 and low salt concentration. This was attributed to a favored reassociation of the polycationic third strand with the anionic DNA duplex. To gain further insights into the factors that contribute to the enhancement of triplex stability and for engineering improved triplex systems, the spermine appendage at C4 of 5-Me-dC was replaced with 1,11-diamino-3,6,9-trioxaundecane to create teg -ODNs. From the triple helix forming abilities of these modified ODNs studied by hysteresis behaviour and the effect of salts on triplex stability, it is demonstrated here that teg- ODNs stabilise triplexes through hydrophobic desolvation while sp -ODNs stabilise triplexes by charge effects. The results imply that factors in addition to base stacking effects and interstrand hydrogen bonds are significantly involved in modulation of triplex stability by base modified oligonucleotides.     

Exclusion of RNA strands from a purine motif triple helix.

Research concerning oligonucleotide-directed triple helix formation has mainly focused on the binding of DNA oligonucleotides to duplex DNA. The participation of RNA strands in triple helices is also of interest. For the pyrimidine motif (pyrimidine.purine.pyrimidine triplets), systematic substitution of RNA for DNA in one, two, or all three triplex strands has previously been reported. For the purine motif (purine.purine.pyrimidine triplets), studies have shown only that RNA cannot bind to duplex DNA. To extend this result, we created a DNA triple helix in the purine motif and systematically replaced one, two, or all three strands with RNA. In dramatic contrast to the general accommodation of RNA strands in the pyrimidine triple helix motif, a stable triplex forms in the purine motif only when all three of the substituent strands are DNA. The lack of triplex formation among any of the other seven possible strand combinations involving RNA suggests that: (i) duplex structures containing RNA cannot be targeted by DNA oligonucleotides in the purine motif; (ii) RNA strands cannot be employed to recognize duplex DNA in the purine motif; and (iii) RNA tertiary structures are likely to contain only isolated base triplets in the purine motif.     

Physico-chemical studies on DNA triplexes containing an alternate third strand with a non-nucleotide linker

Differential scanning calorimetric (DSC), circular dichroism (CD) and molecular mechanics studies have been performed on two triple helices of DNA. The target duplex consists of 16 base pairs in alternate sequence of the type 5′-(purine)_m(pyrimidine)_m-3′. In both the triplexes, the third oligopyrimidine strand crosses the major groove at the purine–pyrimidine junction, with a simultaneous binding of the adjacent purine tracts on alternate strands of the Watson–Crick duplex. The switch is ensured by a non-nucleotide linker, the 1,2,3 propanetriol residue, that joins two 3′–3′ phosphodiester ends. The third strands differ from each other for a nucleotide in the junction region. The resulting triple helices were termed 14-mer-PXP and 15-mer-PXP (where P=phosphate and X=1,2,3-propanetriol residue) according to the number of nucleotides that compose the third strand. DSC data show two independent processes: the first corresponding to the dissociation of the third strand from the target duplex, the second to the dissociation of the double helix in two single strands. The two triple helices show the same stability at pH 6.6. At pH 6.0, the 15-mer-PXP triplex is thermodynamically more stable than the 14-mer-PXP triplex. Thermodynamic data are discussed in relation to structural models. The results are useful when considering the design of oligonucleotides that can bind in an antigene approach to the DNA for therapeutic purposes.     

A molecular model for RecA-promoted strand exchange via parallel triple-stranded helices.

A number of studies have concluded that strand exchange between a RecA-complexed DNA single strand and a homologous DNA duplex occurs via a single-strand invasion of the minor groove of the duplex. Using molecular modeling, we have previously demonstrated the possibility of forming a parallel triple helix in which the single strand interacts with the intact duplex in the minor groove, via novel base interactions (Bertucat et al., J. Biomol. Struct. Dynam. 16:535-546). This triplex is stabilized by the stretching and unwinding imposed by RecA. In the present study, we show that the bases within this triplex are appropriately placed to undergo strand exchange. Strand exchange is found to be exothermic and to result in a triple helix in which the new single strand occupies the major groove. This structure, which can be equated to so-called R-form DNA, can be further stabilized by compression and rewinding. We are consequently able to propose a detailed, atomic-scale model of RecA-promoted strand exchange. This model, which is supported by a variety of experimental data, suggests that the role of RecA is principally to prepare the single strand for its future interactions, to guide a minor groove attack on duplex DNA, and to stabilize the resulting, stretched triplex, which intrinsically favors strand exchange. We also discuss how this mechanism can incorporate homologous recognition.     

Pyrimidine morpholino oligonucleotides form a stable triple helix in the absence of magnesium ions

Oligonucleotides can be used as sequence-specific DNA ligands by forming a local triple helix. In order to form more stable triple-helical structures or prevent their degradation in cells, oligonucleotide analogues that are modified at either the backbone or base level are routinely used. Morpholino oligonucleotides appeared recently as a promising modification for antisense applications. We report here a study that indicates the possibility of a triple helix formation with a morpholino pyrimidine TFO and its comparison with a phosphodiester and a phosphoramidate oligonucleotide. At a neutral pH and in the presence of a high magnesium ion concentration (10 mM), the phosphoramidate oligomer forms the most stable triple helix, whereas in the absence of magnesium ion but at a physiological monovalent cation concentration (0.14 M) only morpholino oligonucleotides form a stable triplex. To our knowledge, this is the first report of a stable triple helix in the pyrimidine motif formed by a noncharged oligonucleotide third strand (the morpholino oligonucleotide) and a DNA duplex. We show here that the structure formed with the morpholino oligomer is a bona fide triple helix and it is destabilized by high concentrations of potassium ions or divalent cations (Mg(2+)).     

Triple helix DNA oligomer melting measured by fluorescence polarization anisotropy

A synthetic DNA triple helix sequence was formed by annealing a pyrimidinic 21 mer single strand sequence onto the complementary purinic sequence centred on a 27 mer duplex DNA. Melting of the third strand was monitored by UV spectrophotometry in the temperature range 10-90 degrees C. The T(m) of the triplex, 37 degrees C, was well separated from the onset of duplex melting. When the same triple helix was formed on the duplex bearing one nick in the center of the pyrimidinic sequence the T(m) of the triplex was shifted to approximately 32 degrees C and overlapped the melting of the duplex. We have used fluorescence polarization anisotropy (FPA) measurements of ethidium bromide (EB) intercalated in duplex and triplex samples to determine the hydrodynamic parameters in the temperature range 10-40 degrees C. The fluorescence lifetime of EB in the samples of double and triple stranded DNA is the same (21.3 +/- 0.5 ns) at 20 degrees C, indicating that the geometries of the intercalation sites are similar. The values for the hydration radii of the duplex, normal triplex, and nicked triplex samples were 10.7 +/- 0.2, 12.2 +/- 0.2, and 12.0 +/- 0.2 A. FPA measurements on normal triplex DNA as a function of temperature gave a melting profile very similar to that derived by UV absorption spectroscopy. For the triplex carrying a nick, the melting curve obtained using FPA showed a clear shift compared with that obtained for the normal triplex sample. The torsional rigidity of the triplex forms was found to be higher than that of the duplex form.     

Sequence specificity in triple-helix formation: experimental and theoretical studies of the effect of mismatches on triplex stability

The specificity of a homopyrimidine oligonucleotide binding to a homopurine-homopyrimidine sequence on double-stranded DNA was investigated by both molecular modeling and thermal dissociation experiments. The presence of a single mismatched triplet at the center of the triplex was shown to destabilize the triple helix, leading to a lower melting temperature and a less favorable energy of interaction. A terminal mismatch was less destabilizing than a central mismatch. The extent of destabilization was shown to be dependent on the nature of the mismatch. Both single base-pair substitution and deletion in the duplex DNA target were investigated. When a homopurine stretch was interrupted by one thymine, guanine was the least destabilizing base on the third strand. However, G in the third strand did not discriminate between a C.G and an A.T base pair. If the stretch of purines was interrupted by a cytosine, the presence of pyrimidines (C or T) in the third strand yielded a less destabilizing effect than purines. This study shows that oligonucleotides forming triple helices can discriminate between duplex DNA sequences that differ by one base pair. It provides a basis for the choice of antigene oligonucleotide sequences targeted to selected sequences on duplex DNA.     

Monitoring denaturation behaviour and comparative stability of DNA triple helices using oligonucleotide-gold nanoparticle conjugates

Gold nanoparticle labels, combined with UV-visible optical absorption spectroscopic methods, are employed to probe the temperature-dependent solution properties of DNA triple helices. By using oligonucleotide-nanoparticle conjugates to characterize triplex denaturation, for the first time triplex to duplex melting transitions may be sensitively monitored, with minimal signal interference from duplex to single strand melting, for both parallel and antiparallel triple helices. Further, the comparative sequence-dependent stability of DNA triple helices may also be examined using this approach. Specifically, triplex to duplex melting transitions for triplexes formed using oligonucleotides that incorporate 8-aminoguanine derivatives were successfully monitored and stabilization of both parallel and antiparallel triplexes following 8-aminoguanine substitutions is demonstrated.     

Monitoring denaturation behaviour and comparative stability of DNA triple helices using oligonucleotide–gold nanoparticle conjugates

Gold nanoparticle labels, combined with UV-visible optical absorption spectroscopic methods, are employed to probe the temperature-dependent solution properties of DNA triple helices. By using oligonucleotide–nanoparticle conjugates to characterize triplex denaturation, for the first time triplex to duplex melting transitions may be sensitively monitored, with minimal signal interference from duplex to single strand melting, for both parallel and antiparallel triple helices. Further, the comparative sequence-dependent stability of DNA triple helices may also be examined using this approach. Specifically, triplex to duplex melting transitions for triplexes formed using oligonucleotides that incorporate 8-aminoguanine derivatives were successfully monitored and stabilization of both parallel and antiparallel triplexes following 8-aminoguanine substitutions is demonstrated.     

Triplex formation at physiological pH by 5-Me-dC-N4-(spermine) [X] oligodeoxynucleotides: non protonation of N3 in X of X*G:C triad and effect of base mismatch/ionic strength on triplex stabilities.

Oligodeoxynucleotide (ODN) directed triplex formation has therapeutic importance and depends on Hoogsteen hydrogen bonds between a duplex DNA and a third DNA strand. T*A:T triplets are formed at neutral pH and C+*G:C are favoured at acidic pH. It is demonstrated that spermine conjugation at N4 of 5-Me-dC in ODNs 1-5 (sp-ODNs) imparts zwitterionic character, thus reducing the net negative charge of ODNs 1-5. sp-ODNs form triplexes with complementary 24mer duplex 8:9 show foremost stability at neutral pH 7.3 and decrease in stability towards lower pH, unlike the normal ODNs where optimal stability is found at an acidic pH 5.5. At pH 7.3, control ODNs 6 and 7 carrying dC or 5-Me-dC, respectively, do not show any triple helix formation. The stability order of triplex containing 5-Me-dC-N4-(spermine) with normal and mismatched duplex was found to be X*G:C approximately X*A:T > X*C:G > X*T:A. The hysteresis curve of sp-ODN triplex 3*8:9 indicated a better association with complementary duplex 8:9 as compared to unmodified ODN 6 in triplex 6*8:9. pH-dependent UV difference spectra suggest that N3 protonation is not a requirement for triplex formation by sp-ODN and interstrand interaction of conjugated spermine more than compensates for loss in stability due to absence of a single Hoogsteen hydrogen bond. These results may have importance in designing oligonucleotides for antigene applications.     

Molecular dynamics simulation study of DNA triplex formed by mixed sequences in solution

The unrestrained molecular dynamics simulation of the triple helical DNA with mix sequences d(GACTGGTGAC).d(CTGACCACTG)*d (GACTGGTGAC), using the particle mesh Ewald sum, is presented here. The Ewald summation method effectively eliminates the usualcut-of of the long range interactions and allowed us to evaluate the full effect of the electrostatic forces. The AMBER5.0 force field has been used during the simulation in solvent. The MD results support a dynamically stable model of DNA triplex over the entire length of the trajectory. The duplex structure assumes the conformation, which is very close to B-DNA. In mixed sequences the purine bases occurs in both strand of DNA duplex. The bases of third strand do not favor the Hoogsteen or/and reverse Hoogsteen type of Hydrogen bonding but they form hydrogen bonds with the bases of both the strand of DNA duplex. The orientation of the third strand is parallel to one of the strand of duplex and all nucleotides (C, A, G & T) show isomorphic behavior with respect to the DNA duplex. The conformation of all the three strands is almost same except few exceptions. Due to interaction of third strand the conformational change in the duplex structure and a finite amount of displacement in the W-C base pairs have been observed. The conformational variation of the back bone torsion angles and helicoidal parameters, groove widths have been discussed. The sequence dependent effects on local conformation, helicoidal and morphological structure, width of the grooves of DNA helix may have important implication for understanding the functional energetics and specificity of interactions of DNA and its triplexes with proteins, pharmaceutical agents and other ligands.     

Unwinding of a DNA triple helix by the Werner and Bloom syndrome helicases

Bloom syndrome and Werner syndrome are genome instability disorders, which result from mutations in two different genes encoding helicases. Both enzymes are members of the RecQ family of helicases, have a 3' --> 5' polarity, and require a 3' single strand tail. In addition to their activity in unwinding duplex substrates, recent studies show that the two enzymes are able to unwind G2 and G4 tetraplexes, prompting speculation that failure to resolve these structures in Bloom syndrome and Werner syndrome cells may contribute to genome instability. The triple helix is another alternate DNA structure that can be formed by sequences that are widely distributed throughout the human genome. Here we show that purified Bloom and Werner helicases can unwind a DNA triple helix. The reactions are dependent on nucleoside triphosphate hydrolysis and require a free 3' tail attached to the third strand. The two enzymes unwound triplexes without requirement for a duplex extension that would form a fork at the junction of the tail and the triplex. In contrast, a duplex formed by the third strand and a complement to the triplex region was a poor substrate for both enzymes. However, the same duplex was readily unwound when a noncomplementary 5' tail was added to form a forked structure. It seems likely that structural features of the triplex mimic those of a fork and thus support efficient unwinding by the two helicases.     

Prediction of the structure of the Y+.R-.R(+)-type DNA triple helix by molecular modelling.

Molecular mechanics has been used to predict the structure of the Y+.R-.R(+)-type DNA triple helix, in which a second polypurine strand binds antiparallel to the homopurine strand of a homopurine/homopyrimidine stretch of duplex DNA. From calculations on the sequence d(C)10.d(G)10.d(G)10, two likely structures emerge. One has the glycosidic torsions of the third strand bases in the anti-conformation and Hoogsteen hydrogen-bonds to the purine strand of the duplex, the other has the third strand purines in the syn orientation and uses a reverse-Hoogsteen hydrogen-bonding pattern. Despite the large structural differences between these two types of triplex, calculations performed in vacuo with a distance-dependent dielectric constant to mimic the shielding effect of solvent show them to be energetically very similar, with the latter (syn) slightly preferred. However, if explicit solvent molecules are included in the calculation, the anti conformation is found to be much preferred. This difference in the results seems to stem from an underestimation of short-range electrostatic interactions in the in vacuo simulations. When TAA or TAT base triples are substituted for the sixth CGG triple in the sequence, it is found that, for the solvated model, the third strand base of the TAA triple prefers the syn orientation while that in the TAT triple retains a preference, though reduced, for the anti conformation.     

Intramolecular triple-helix formation at (PunPyn).(PunPyn) tracts: recognition of alternate strands via Pu.PuPy and Py.PuPy base triplets.

Triple-helical DNA shows increasing potential for applications in the control of gene expression (including therapeutics) and the development of sequence-specific DNA-cleaving agents. The major limitation in this technology has been the requirement of homopurine sequences for triplex formation. We describe a simple approach that relaxes this requirement, by utilizing both Pu.PuPy and Py.PuPy base triplets to form a continuous DNA triple helix at tandem oligopurine and oligopyrimidine tracts. [Triplex formation at such a sequence has been previously demonstrated only with the use of a special 3'-3' linkage in the third strand [Horne, D. A., & Dervan, P. B. (1990) J. Am. Chem. Soc. 112, 2435-2437].] Supporting evidence is from chemical probing experiments performed on several oligonucleotides designed to form 3-stranded fold-back structures. The third strand, consisting of both purine and pyrimidine blocks, pairs with purines in the Watson-Crick duplex, switching strands at the junction between the oligopurine and oligopyrimidine blocks but maintaining the required strand polarity without any special linkage. Although Mg2+ ions are not required for the formation of Pu.PuPy base triplets, they show enhanced stability in the presence of Mg2+. In the sequences observed. A.AT triplets appear to be more stable than G.GC triplets. As expected, triplex formation is largely independent of pH unless C+.GC base triplets are required.