Visualization of viral assembly in the infected cell.

The study of the virus life cycle in infected cells is a methodological challenge due to the small size and diversity of the viral components. Recent developments on preservation of fine structure and molecular localization have provided a group of powerful methods with wide applications in cell biology and virology. Among the different electron microscopy (EM) techniques available to visualize viral assembly at the intracellular level, we will focus on conventional ultrathin sections, cryosections, and freeze-substitution. For obtaining molecular information associated to ultrastructure we have now a group of methods to detect viral proteins (immunogold labeling), as well as the viral genome, through the different techniques for detection of nucleic acids (the enzyme-gold approach, in situ hybridization, and elemental mapping). We will illustrate the applications of these methods with examples of viruses that exhibit different levels of structural complexity. These new approaches help to detect and identify viruses in clinical samples and to characterize the virus life cycle and the cellular components involved, to obtain data that could help for a therapeutic intervention, and to characterize virus-like particles that can be the basis of new and safe vaccines.     

Master equation approach to the assembly of viral capsids

The distribution of inequivalent geometries occurring during self-assembly of the major capsid protein in thermodynamic equilibrium is determined based on a master equation approach. These results are implemented to characterize the assembly of SV40 virus and to obtain information on the putative pathways controlling the progressive build-up of the SV40 capsid. The experimental testability of the predictions is assessed and an analysis of the geometries of the assembly intermediates on the dominant pathways is used to identify targets for anti-viral drug design.     

Mitochondrial cytochrome b-c complex: its oxidation-reduction components and their stoichiometry.

A cytochrome b-c₁ complex was isolated from pigeon breast muscle mitochondria and purified to a content of 3 nmol of cytochrome c₁ per milligram of protein. Anaerobic suspensions of the preparation were titrated with reducing equivalents (NADH) and oxidizing equivalents (ferricyanide). The oxidation-reduction components of the complex were measured by the number of reducing equivalents accepted or donated per cytochrome c₁ and compared with the stoichiometries of the known redox components as measured by independent methods. The preparation accepts or donates 5.2 ± 0.3 equivalents per cytochrome c₁, while the measured content of cytochrome c₁, cytochrome b₅₆₁, cytochrome b₅₆₅, Rieske iron-sulfur protein, ubiquinone, and succinate dehydrogenase accounts for 5.0 ± 0.2 equivalents per cytochrome c₁. It is concluded that there are no unknown redox components in the cytochrome b-c₁ complex. The cytochrome b-c₁ complex (energy transduction site 2) appears to be a structural unit containing equal amounts of cytochrome c₁, cytochrome b₅₆₁, cytochrome b₅₆₆, and the Rieske iron-sulfur protein.     

Coupling tandem affinity purification and quantitative tyrosine iodination to determine subunit stoichiometry of protein complexes

Rapid protein purification methodologies, such as strategies involving the tandem affinity purification module, have resulted in the identification of a tremendous number of multisubunit protein complexes. Furthermore, in this modern genomic age, mass spectrometry methods are often coupled with affinity purification to identify the genes that encode each protein subunit. However, simple methodologies to determine the stoichiometry of individual subunits within a multisubunit complex have not received much attention. In this article we describe a procedure to rapidly and efficiently determine the stoichiometry of subunits within multisubunit complexes using a combination of tandem affinity purification and quantitative 125I labeling of subunit tyrosines.     

Restitution of infectivity to spikeless vesicular stomatitis virus by solubilized viral components.

Noninfectious spikeless particles have been obtained from vesicular stomatitis virus (VSV, Indiana serotype) by bromelain or Pronase treatment. They lack the viral glycoprotein (G) but contain all the other viral components (RNA, lipid, and other structural proteins). Triton-solubilized VSV-Indiana glycoprotein preparations, containing the viral G protein as well as lipids (including phospholipids), have been extracted from whole virus preparations, freed from the majority of the detergent, and used to restore infectivity to spikeless VSV. The infectivity of such particles has been found to be enhanced by poly-L-ornithine but inhibited by Trition or homologous antiserum pretreatment. Heat-denatured glycoprotein preparations were not effective in restoring the infectivity to spikeless VSV. Heterologous glycoprotein preparations from the serologically distinct VSV-New Jersey serotype were equally capable of making infectious entities with VSV-Indiana spikeless particles, and the infectivity of these structures was inhibited by VSV-New Jersey antiserum but not by VSV-Indiana antiserum. Purified, detergent-free glycoprotein selectively solubilized from VSV-Indiana by the dialyzable detergent, octylglucoside, also restored infectivity of spikeless virions of VSV-Indiana and VSV-New Jersey.     

Membrane localization and topology of a viral assembly protein.

The gene I protein (pI) of the filamentous bacteriophage f1 is required for the assembly of this virus. Antibodies specific to either the amino or carboxyl terminus of this protein were used to determine the location and topology of the gene I protein in f1-infected bacteria. pI is anchored in the inner membrane of Escherichia coli cells via a 20-amino-acid hydrophobic stretch, with its carboxyl-terminal 75 residues located in the periplasm and its amino-terminal 253 amino acids residing in the cytoplasm. By using the carboxyl-terminal pI antibody, a smaller protein, pI*, is also detected in f1-infected cells at a ratio of one to two molecules per molecule of pI. Analysis of proteins produced from a gene I amber mutant plasmid or bacteriophage suggests that pI* is most likely the result of an in-frame internal translational initiation event at methionine 241 of the 348-amino-acid pI. pI* is shown to be an integral inner membrane protein inserted in the same orientation as pI. The relation of the cellular locations of pI and pI* to some of the proposed functions of pI is discussed.     

Cellular stoichiometry of the components of the chemotaxis signaling complex

The chemotactic sensory system of Escherichia coli comprises membrane-embedded chemoreceptors and six soluble chemotaxis (Che) proteins. These components form signaling complexes that mediate sensory excitation and adaptation. Previous determinations of cellular content of individual components provided differing and apparently conflicting values. We used quantitative immunoblotting to perform comprehensive determinations of cellular amounts of all components in two E. coli strains considered wild type for chemotaxis, grown in rich and minimal media. Cellular amounts varied up to 10-fold, but ratios between proteins varied no more than 30%. Thus, cellular stoichiometries were almost constant as amounts varied substantially. Calculations using those cellular stoichiometries and values for in vivo proportions of core components in complexes yielded an in vivo stoichiometry for core complexes of 3.4 receptor dimers and 1.6 CheW monomers for each CheA dimer and 2.4 CheY, 0.5 CheZ dimers, 0.08 CheB, and 0.05 CheR per complex. The values suggest a core unit of a trimer of chemoreceptor dimers, a dimer (or two monomers) of kinase CheA, and two CheW. These components may interact in extended arrays and, thus, stoichiometries could be nonintegral. In any case, cellular stoichiometries indicate that CheY could be bound to all signaling complexes and this binding would recruit essentially the entire cellular complement of unphosphorylated CheY, and also that phosphatase CheZ, methylesterase CheB, and methyltransferase CheR would be present at 1 per 2, per 14, and per 20 core complexes, respectively. These characteristic ratios will be important in quantitative treatments of chemotaxis, both experimental and theoretical.     

Iron-sulfur components of succinate dehydrogenase: stoichiometry and kinetic behavior in activated preparations.

Extensively or completely activated preparations of beef heart succinate dehydrogenase have been investigated by electron paramagnetic resonance (EPR) techniques at 6 to 97 K. Reductive titrations with dithionite and rapid kinetic studies were performed with various types of soluble and membrane-bound preparations of the enzyme. The following components were detected and their behavior analyzed: a free radical, presumably arising from the covalently bound flavin on reduction, two iron-sulfur centers of the ferredoxin type, the signals of which appear on reduction, and a highpotential iron-sulfur component, detectable in the oxidized state. The high-potential component was only detected in complex II and inner-membrane preparations. This component and one of the ferredoxin-type centers were present in amounts close to stoichiometric with the flavin and were reduced by substrate. The other ferredoxin-type center was present in amounts between 0.1 and 0.5 times that of the flavin and was reduced only by dithionite. Of the components reduced by succinate, however, only a fraction (up to 50% of the high-potential iron-sulfur center and 40-60% of the ferredoxin-type iron-sulfur center) was reduced within the turnover time of the enzymes; In complex II not more than about 10% of the flavin appeared in the semiquinone form at any time. Soluble, purified preparations behaved similarly except that the high-potential component was nearly or completely absent and extensive accumulation of the free radical occurred (up to 70 to 80% of the flavin) in titration and kinetic experiments. No significant difference was observed between the rates of semiquinone formation and the reduction of the ferredoxin-type or high-potential centers by the substrate. Also no qualitative differences in the properties studied in this work became apparent between prepatations containing 4 or 8 iron atoms, respectively.     

Molecular mass, stoichiometry, and assembly of 20 S particles

N-Ethylmaleimide-sensitive factor (NSF), soluble NSF attachment proteins (SNAPs), and SNAP receptor (neuronal SNARE) complexes form 20 S particles with a mass of 788 +/- 122 kDa as judged by scanning transmission electron microscopy. A single NSF hexamer and three alpha SNAP monomers reside within a 20 S particle as determined by quantitative amino acid analysis. In order to study the binding of alpha SNAP and NSF in solution, to define their binding domains, and to specify the role of oligomerization in their interaction, we fused domains of alpha SNAP and NSF to oligomerization modules derived from thrombospondin-1, a trimer, and cartilage oligomeric matrix protein, a pentamer, respectively. Binding studies with these fusion proteins reproduced the interaction of alpha SNAP and NSF N domains in the absence of the hexamerization domain of NSF (D2). Trimeric alpha SNAP (or its C-terminal half) is sufficient to recruit NSF even in the absence of SNARE complexes. Furthermore, pentameric NSF N domains are able to bind alpha SNAP in complex with SNAREs, whereas monomeric N domains do not. Our results demonstrate that the oligomerization of both NSF N domains and alpha SNAP provides a critical driving force for their interaction and the assembly of 20 S particles.     

Dynamic pathways for viral capsid assembly

We develop a class of models with which we simulate the assembly of particles into T1 capsidlike objects using Newtonian dynamics. By simulating assembly for many different values of system parameters, we vary the forces that drive assembly. For some ranges of parameters, assembly is facile; for others, assembly is dynamically frustrated by kinetic traps corresponding to malformed or incompletely formed capsids. Our simulations sample many independent trajectories at various capsomer concentrations, allowing for statistically meaningful conclusions. Depending on subunit (i.e., capsomer) geometries, successful assembly proceeds by several mechanisms involving binding of intermediates of various sizes. We discuss the relationship between these mechanisms and experimental evaluations of capsid assembly processes.     

Residue conservation in viral capsid assembly

To evaluate the evolutionary constraints placed on viral proteins by the structure and assembly of the capsid, we calculate Shannon entropies in the aligned sequences of 45 polypeptide chains in 32 icosahedral viruses, and relate these entropies to the residue location in the three-dimensional structure of the capsids. Three categories of residues have entropies lower than the chain average implying that they are better conserved than average: residues that are buried within a subunit (the protein core), residues that contain atoms buried at an interface between subunits (the interface core), and residues that contribute to several such interfaces. The interface core is also conserved in homomeric proteins and in transient protein-protein complexes, which have only one interface whereas capsids have many. In capsids, the subunit interfaces implicate most of the polypeptide chain: on average, 66% of the capsid residues are at an interface, 34% at more than one, and 47% at the interface core. Nevertheless, we observe that the degree of residue conservation can vary widely between interfaces within a capsid and between regions within an interface. The interfaces and regions of interfaces that show a low sequence variability are likely to play major roles in the self-assembly of the capsid, with implications on its mechanism that we discuss taking adeno-associated virus as an example.     

Protein degradation corrects for imbalanced subunit stoichiometry in OST complex assembly

Protein degradation is essential for cellular homeostasis. We developed a sensitive approach to examining protein degradation rates in Saccharomyces cerevisiae by coupling a SILAC approach to selected reaction monitoring (SRM) mass spectrometry. Combined with genetic tools, this analysis made it possible to study the assembly of the oligosaccharyl transferase complex. The ER-associated degradation machinery compensated for disturbed homeostasis of complex components by degradation of subunits in excess. On a larger scale, protein degradation in the ER was found to be a minor factor in the regulation of protein homeostasis in exponentially growing cells, but ERAD became relevant when the gene dosage was affected, as demonstrated in heterozygous diploid cells. Hence the alleviation of fitness defects due to abnormal gene copy numbers might be an important function of protein degradation.     

Visualization of viral DNA assembly using nonfluorescent staining

ABSTRACT

We present an easy test for rapid visualization of viral DNA assemblies in infected cell cytoplasm. We selected the best stains for nuclear staining: Nile blue A, Bismarck brown, gallocyanin chrome alum, methyl green pyronin and azure II. None of the staining techniques is fluorescent, which facilitates their use in everyday experiments. Methyl green is most promising for routine detection of viral DNA assemblies in the cytoplasm; the procedure enables ready detection of viral DNA accumulation in the cytoplasm.     

Combined NMR and EPR spectroscopy to determine structures of viral fusion domains in membranes

Methods are described to determine the structures of viral membrane fusion domains in detergent micelles by NMR and in lipid bilayers by site-directed spin labeling and EPR spectroscopy. Since in favorable cases, the lower-resolution spin label data obtained in lipid bilayers fully support the higher-resolution structures obtained by solution NMR, it is possible to graft the NMR structural coordinates into membranes using the EPR-derived distance restraints to the lipid bilayer. Electron paramagnetic dynamics and distance measurements in bilayers support conclusions drawn from NMR in detergent micelles. When these methods are applied to a structure determination of the influenza virus fusion domain and four point mutations with different functional phenotypes, it is evident that a fixed-angle boomerang structure with a glycine edge on the outside of the N-terminal arm is both necessary and sufficient to support membrane fusion. The human immunodeficiency virus fusion domain forms a straight helix with a flexible C-terminus. While EPR data for this fusion domain are not yet available, it is tentatively speculated that, because of its higher hydrophobicity, a critically tilted insertion may occur even in the absence of a kinked boomerang structure in this case.