New expanded bed adsorbents for the recovery of DNA

A 20–40 m pellicular high density (3.7 g cm^–3) expanded bed material has been designed for the capture of DNA and other large macromolecules. Anion exchangers fashioned out of these supports exhibited dramatically enhanced DNA binding capacities over commercial anion exchange adsorbents (6 mg ml^–1, c.f. 50 g ml^–1 at 10% breakthrough), due to a combination of small particle and fuzzy surface architecture created through the coupling of polyethylene imine chains.     

High gradient magnetic separation versus expanded bed adsorption: a first principle comparison

A robust new adsorptive separation technique specifically designed for direct product capture from crude bioprocess feedstreams is introduced and compared with the current bench mark technique, expanded bed adsorption. The method employs product adsorption onto sub-micron sized non-porous superparamagnetic supports followed by rapid separation of the loaded adsorbents from the feedstock using high gradient magnetic separation technology. For the recovery of Savinase® from a cell-free Bacillus clausii fermentation liquor using bacitracin-linked adsorbents, the integrated magnetic separation system exhibited substantially enhanced productivity over expanded bed adsorption when operated at processing velocities greater than 48 m h^–1. Use of the bacitracin-linked magnetic supports for a single cycle of batch adsorption and subsequent capture by high gradient magnetic separation at a processing rate of 12 m h^–1 resulted in a 2.2-fold higher productivity relative to expanded bed adsorption, while an increase in adsorbent collection rate to 72 m h^–1 raised the productivity to 10.7 times that of expanded bed adsorption. When the number of batch adsorption cycles was then increased to three, significant drops in both magnetic adsorbent consumption (3.6 fold) and filter volume required (1.3 fold) could be achieved at the expense of a reduction in productivity from 10.7 to 4.4 times that of expanded bed adsorption.     

Monoclonal antibody purification by affinity chromatography with ligands derived from the screening of peptide combinatory libraries

The peptide, Ala-Pro-Ala-Arg (APAR), was selected from the screening of a tetrapeptide combinatorial synthetic library as the ligand for affinity purification of an anti-Granulocyte Macrophage-Colony Stimulating Factor (GM-CSF) monoclonal antibody (Mab) developed in mouse ascitis. The affinity chromatographic matrix obtained by attachment of APAR to agarose, having a peptide density of 0.5 mol ml^–1, showed a maximum capacity of 9.1 mg Mab ml^–1 and a dynamic capacity of 3.9 mg Mab ml^–1. A 95% yield of electrophoretically pure anti-GM-CSF was obtained in a single step.     

Gene therapy for diabetic rats by electroporational transfer of naked plasmid with human pre-pro-insulin gene into skeletal muscle

A naked plasmid with human pre-pro-insulin gene was transferred into skeletal muscle of diabetic rats by electric pulses and gene expression was detected. Blood glucose concentration was decreased from 24 mmol l^–1 to 8.5 mmol l^–1. Circulating insulin-like protein was increased significantly to 15–20 U ml^–1, while that of the control group injected with the empty vector remained at less than 10 U ml^–1. The low blood glucose concentration lasted for more than two months. These studies indicate that electroporational transfer of plasmid with human pre-pro-insulin gene into skeletal muscle could be a potential method of gene therapy for human diabetes mellitus.     

Parameters influencing transient and stable transformation of barley (Hordeum vulgare L.) protoplasts

Cat gene expression has been investigated following PEG-mediated plasmid uptake into barley protoplasts. The uptake conditions optimised for transient expression were employed for stable transformation. Transformed protoplast-derived calli of the cvs. Dissa and Igri, were selected on medium containing G418 at 40 g ml^–1 or kanamycin sulphate at 250 g ml^–1. Absolute transformation frequencies of 28.9×10^–5 and 21.3×10^–5 were recorded for Dissa with kanamycin sulphate and G418 selection, respectively. The frequency for Igri was 11.5×10^–5 with G418 selection. Antibiotic resistant protoplast-derived colonies expressed NPTII activity; Southern hybridisation confirmed integration of the nptII gene into barley genomic DNA.Abbreviations ABA abscisic acid - AC-CAP acetylated chloramphenicol - BAP 6-benzylaminopurine - cat chloramphenicol acetyltransferase gene - CAT chloramphenicol acetyltransferase activity - CaMV cauliflower mosaic virus - CAP chloramphenicol, 2,4-d-2,4-dichlorophenoxyacetic acid - GA₃ gibberellic acid - G418 Geneticin - gus -glucuronidase gene - HEPES (N[2-hydroxyethyl] piperazine-N-[2-ethanesulphonic acid]) - IAA indole acetic acid - MES 2-N-morpholinoethane sulphonic acid - NAA -naphthaleneacetic acid - npt II neomycin phosphotransferase gene - NPTH neomycin phosphotransferase activity - PEG polyethylene glycol - SCV settled cell volume     

Lack of effect of thrombin on fibrin(ogen)-endothelial cell interaction

In the present study we investigate the fibrin(ogen)-endothelial cell binding and the effect of thrombin on the endothelial cells in relation to fibrin(ogen) binding capacity. Endothelial cell fibrinogen binding was concentration and time-dependent, reaching saturation at 1.4 M of added ligand. At equilibrium, the number of fibrinogen molecules bound per endothelial cell in the monolayer was 5.8±0.7×10⁶. When endothelial cells were activated by different concentrations of thrombin (0–0.1 NIH units ml^–1), no increase in fibrinogen binding capacity was observed at all the thrombin concentration tested. Whereas disruption of endothelial cell monolayers was observed at thrombin concentrations higher than 0.05 NIH units ml^–1, no increase in the amount of fibrinogen bound was observed. Therefore, resting and thrombin-activated endothelial cells show the same fibrinogen binding capacity.The adhesion of endothelial cells in suspension on immobilized fibrinogen or fibrin was studied to ascertain whether the behavior of fibrin is similar to that of fibrinogen. The extent of endothelial cell attachment to immobilized fibrinogen and fibrin was similar (4275±130 cells cm^–2 for fibrinogen and 4350±235 cells cm^–2 for fibrin) and represent approximately 40% of the added endothelial cells. However, endothelial cell adhesion to immobilized fibrin was significantly faster than endothelial cell adhesion to immobilized fibrinogen. The maximum binding rate was 66±9 and 46±8 cells cm^–2 min^–1 for fibrin and fibrinogen, respectively. Therefore, the fibrinopeptides released by thrombin from fibrinogen induce qualitative changes which enhance the fibrin interaction with the endothelial cells.     

Factors affecting transient gene expression in electroporated black spruce (Picea mariana) and jack pine (Pinus banksiana) protoplasts

Summary Methods were developed for transient gene expression in protoplasts of black spruce (Picea mariana) and jack pine (Pinus banksiana). Protoplasts were isolated from embryogenic suspension cultures of black spruce and from non-embryogenic suspensions of jack pine. Using electroporation, transient expression of the chloramphenicol acetyltransferase (CAT) gene was assayed and shown to be affected by the cell line used, by voltage, temperature, and by the plasmid concentration and conformation. Increasing the plasmid DNA concentration (0–150g ml^–1) resulted in higher levels of transient CAT expression. In jack pine, linearized plasmid gave 2.5 times higher levels of CAT enzyme activity than circular. Optimal voltage varied for each cell line of the two species within the range 200–350 V cm^–1 (960 F). A heat shock treatment of protoplasts for 5 min at 45 °C resulted in enhanced CAT gene expression for both species.NRCC No. 30491     

Transformation of sugarcane protoplasts by direct uptake of a selectable chimaeric gene

Sugarcane protoplasts were transformed to kanamycin resistance at a frequency of approximately 8 in 10⁷ following PEG-induced uptake of Sma1 linearised pABD1 plasmid. DNA-treated protoplasts were cultured in agarose droplets, and protoplast-derived transformants selected on 80 g ml^–1 kanamycin. Transformed tissues maintained on this level of antibiotic expressed APH(3)II activity, and contained DNA that hybridised to a probe with the APH(3)II gene.Abbreviations APH(3)II aminoglycoside phosphotransferase - PEG polyethylene glycol - 2,4-D 2,4-dichlorophenoxyacetic acid     

Accumulation of cadmium by immobilizedZoogloea ramigera 115

Summary Zoogloea ramigera 115 was immobilized into beads of calcium-alginate and placed into batch air-bubbled column reactors. In the absence of any added nutrients the immobilized bacterium adsorbed Cd from solutions containing levels of 2 and 20 g ml^–1 per day, over a period of 21 and 20 days, respectively. Adsorption of Cd from solutions containing 20 g ml^–1 Cd was better than 90% for 16 days. Beads treated with Cd at 2 g ml^–1 never adsorbed less than 95% of the metal. Alginate adsorbed Cd as well, but inclusion of cells changed the effectiveness of adsorption. Of a 250 g ml^–1 Cd solution, alginate adsorbed 70.4% Cd in 60 min whereas alginate plus cells adsorbed 90.5% in the same time span. Temperature had no effect on adsorption by immobilized cells at levels of 2 and 10 g ml^–1 Cd. However at higher concentrations, binding was enhanced as temperature increased.Z. ramigera beads were stable during all treatments and for prolonged periods of time (21 days).     

Biochemical and catalytic properties of endo-1,4-β-xylanases from Thermomyces lanuginosus (wild and mutant strains)

Endoxylanases from the thermophilic fungus, Thermomyces lanuginosus ATCC 44008 (cellulase free wild and mutant strains), were purified to homogeneity by anion-exchange and molecular-sieve chromatographic methods. The purified enzymes were monomers with molecular masses of 22 kDa (wild type) and 24 kDa (mutant), estimated by SDS-PAGE and gel filtration. As glycoproteins, the purified enzymes had 0.74% (wild type) and 11.8% (mutant) carbohydrate contents, and pI values of 5.8 and 6, respectively. The optimal pH and temperature values of wild type xylanase were determined to be pH 7 and 60 °C, whereas pH 6.7 and 70 °C, were optimal for the purified mutant enzyme (K _m and V _max values of 3.7 mg ml^–1 and 670 mol min^–1 xylose compared to the kinetic values of the purified wild type xylanase –5.1 mg ml^–1 and 385 mol min^–1 xylose). Inhibition studies suggested the possible involvement of histidine, tryptophan residues and carboxylic groups in the binding or catalysis.     

Enhancement of production of cloned α-amylase by lactic acid feeding from recombinant Saccharomyces cerevisiae using a SUC2 promoter

-Amylase production was higher (13 units ml^–1) when a recombinant Saccharomyces cerevisiae containing a SUC2 promoter was grown with 10 g lactic acid l^–1 than without addition (8 units ml^–1). With continuous lactic acid feeding in the inducing phase, -amylase increased to 79 units ml^–1 in a 1-l jar fermenter.     

Enhancement of plasmid stability and protein productivity using multi-pulse, fed-batch culture of recombinant Saccharomyces cerevisiae

The plasmid stability of a recombinant Saccharomyces cerevisiae strain, which expresses cloned -amylase, was increased when glucose or yeast extract was fed with multi-pulse mode in fed-batch culture. Using a novel strategy combining constant rate fed-batch culture and multi-pulse feeding of yeast extract, the plasmid stability was maintained over 90%, meanwhile, 36 g cells l^–1 and 208 units of cloned -amylase activity ml^–1 were obtained.     

Competence for gene transfer by electroporation in a sub-population of protoplasts from uniform carrot cell suspension cultures

We have investigated the basis for increased transient reporter gene expression following electroporation of protoplasts from uniform carrot cell suspension cultures at increasing DNA concentrations. Use of a combination of histochemical and fluorometric GUS gene assays allowed differentiation between increases due to a higher proportion of expressing protoplasts and increases due to higher expression by each expressing protoplast. A plateau of 20–25% expressing protoplasts was reached by 50 g ml^–1 DNA but total expression continued to increase in direct proportion to applied DNA concentration up to at least 100 g ml^–1. This indicates the existence of a subpopulation of protoplasts competent for the uptake and expression of genes by electroporation.     

Phenotypic expression of Vogesella indigofera upon exposure to hexavalent chromium,Cr6+

A eubacterium producing a blue pigment was isolated from a drinking water filter, and subsequently identified as Vogesella indigofera. This bacterium was further investigated for its morphological and biochemical characteristics after exposure to hexavalent chromium, Cr⁶⁺. The threshold Cr⁶⁺ concentration inhibiting the pigment production by V. indigofera was 200–300 g ml^–1 in liquid cultures of nutrient broth and 100–150 g ml^–1 on nutrient agar plates. The Cr⁶⁺ concentration preventing V. indigofera growth was 300–400 g ml^–1 in liquid cultures, but greater than 150 g ml^–1 on agar plates. Moreover, rugose colonies without the blue pigmentation were observed on agar plates amended with 150 (g Cr⁶⁺) ml^–1. The biochemical utilization profiles of the colonies without pigmentation did not differ from the original pigment-producing ones, indicating phenotypic plasticity of this bacterium. The difference of phenotypic expression of V. indigofera under various Cr⁶⁺ concentrations might have potential application as a pollution bioindicator for heavy metals.     

Quantification of the contribution of surface outgrowth to biocatalysis in sol-gels: oxytetracycline production by <Emphasis Type="Italic">Streptomyces rimosus</Emphasis>

A technique was developed for differentiating the activity of microbes solely within sol gels by using the contribution of biomass outgrowth. Streptomyces rimosus was immobilised in colloidal silica gels and biomass growth, oxytetracycline synthesis, pH and carbohydrate consumption were compared for UV surface-sterilised gels, untreated gels, and liquid cultures. Absolute and biomass specific oxytetracycline yields were higher for non-sterile gels than for liquid culture. Biomass solely within colloidal silica gels (1.7 mg ml^–1), and gels obtained from colloidal silica modified by addition of larger silica particles (1.2 mg ml^–1) yielded 27 and 21 g ml^–1 oxytetracycline compared with 97 and 104 g ml^–1 for unsterilised gels (3.6 and 5.2 mg ml^–1 biomass) displaying outgrowth. It was therefore apparent that biomass and antibiotic production within the gels was limited and that optimisation requires gel modification.     

Plasmid mediated metal and antibiotic resistance in marinePseudomonas

Pseudomonas sp isolated from the Bay of Bengal (Madras coast) contained a single large plasmid (pMR1) of 146 kb. Plasmid curing was not successful with mitomycin C, sodium dodecyl sulfate, acridine orange, nalidixic acid or heat. Transfer of mercury resistance from marinePseudomonas toEscherichia coli occurred during mixed culture incubation in liquid broth at 10^–4 to 10^–5 ml^–1. However, transconjugants lacked the plasmid pMR1 and lost their ability to resist mercury. Transformation of pMR1 intoE. coli competent cells was successful; however, the efficiency of transformation (1.49×10² Hg^r transformants g^–1 pMR1 DNA) was low.E. coli transformants containing the plasmid pMR1 conferred inducible resistance to mercury, arsenic and cadmium compounds similar to the parental strain, but with increased expression. The mercury resistant transformants exhibited mercury volatilization activity. A correlation existed between metal and antibiotic resistance in the plasmid pMR1.     

Fluorimetric quantification of intracellular lactate dehydrogenase during fermentation using flow injection analysis

A flow injection system for the on-line detection of the intracellular enzyme lactate dehydrogenase (LDH) during fermentation has been developed. The system is comprised of an on-line cell disintegration part, an immobilised dye based expanded bed column for the affinity capture of LDH and a fluorimetric detection unit. The system with a linearity of 0.1–5.4 U LDH ml^–1 was applied for the detection of intracellular accumulation of LDH during Lactococcus lactis subsp.lactis cultivation.     

Preparation and characterisation of Cibacron Blue F3G-A poly(ethylene) hollow-fibre affinity membranes

Poly(ethylene) hollow-fibre membranes with immobilised Cibacron Blue F3G-A were obtained in four different ways from epoxy-activated fibres. Membranes with a maximum capacity of 26 mg lysozyme ml^–1and a dye density of 52 mol ml^–1were obtained when ammonia was used to open the epoxy group before dye immobilisation. Pure water flux of the modified membranes at 1 bar pressure was 1.0 cm min^–1, thus meaning only a reduction of 1.5-fold with regard to the unmodified membranes. The support-dye bond was stable as judged by the unmodified capacity of the membranes and the negligible amount of dye leaked after 520 h of exposure to 6 M urea in 0.5 M NaOH.     

Examining the relationship between bacteria and heterotrophic nanoflagellates in Funka Bay (Japan) using the size-fractionation method

The chemical and biological conditions, and the bacteria-heterotrophic nanoflagellate (HNF) relationship were investigated in the vicinity of Funka Bay, southwest of Hokkaido, Japan during early spring 1999. At the time of sampling, chlorophyll a concentration, bacteria, phycoerythrin rich-cyanobacteria, and HNF abundance were in the following ranges: 0.3–3.6 g l^–1, 2.5–5.6 × 10⁵ cells ml^–1, 0.6–1.2 × 10³ cells ml^–1, and 2.2–4.2 × 10³ cells ml^–1, respectively. Dissolved inorganic nitrogen, phosphate and silicate concentrations were in the ranges: 8.7–12.2 M, 0.9–2.0 M, and 21.6–25.5 M, respectively. Primary production ranged from 6.4 to 76.3 mg C m^–3 d^–1. Using water samples from regions of different productivity levels (in and outside bay), the bacteria - HNF relationship was uncoupled experimentally by the size-fractionation technique. Higher primary production (19.9 mg C m^–3 d^–1) in the bay supported higher bacterial growth rate (0.029 h^–1). However, outside the bay both primary production (6.4 mg C m^–3 d^–1) and bacterial growth rate (0.007 h^–1) were lower. The HNF growth rates and grazing rates were similar for both but by comparing both HNF grazing capacity and bacterial production, there was net decrease in bacterial abundance outside the bay and net increase inside the bay. The microbial parameters (rates and abundance) and the amount of carbon flow estimated through the phytoplankton – dissolved organic matter (DOM) – bacteria loop were different between the coastal station and the open ocean station. However HNF grazing and growth rates was similar for both stations.