ATP binding to bovine serum albumin.

Specific binding of ATP to bovine serum albumin (BSA) is demonstrated employing ATP derivatives spin-labeled at either N6 or C8 of adenine ring or at the ribose moiety. Based on a 1:1 stoichiometry binding constants are in the 50-100 microM range. Binding is largely competitive with ATP or stearic acid. A small fraction of the labeled nucleotides could not be liberated by these ligands. Binding of AMP is in the millimolar range, only.     

The binding of palmitoyl-CoA to bovine serum albumin

Bovine serum albumin (BSA) is routinely utilized in vitro to prevent the adverse detergent effects of long-chain acyl-CoA esters (i.e., palmitoyl-CoA) in enzyme assays. Determination of substrate saturation kinetics in the presence of albumin would only be valid if the relationship between bound and free substrate concentrations was known. To elucidate the relationship between bound and free palmitoyl-CoA concentrations in the presence of BSA, several different techniques including equilibrium dialysis, equilibrium partitioning, fluorescence polarization and direct fluorescence enhancement were investigated. Direct fluorescence enhancement using a custom synthesized fluorescent probe, 16-(9-anthroyloxy)palmitoyl-CoA (AP-CoA), was the best approach to this question. Measurement of the relationship between mol of palmitoyl-CoA bound per mol of BSA (nu) versus -log[free palmitoyl-CoA] revealed that the binding of palmitoyl-CoA to BSA, like palmitate was nonlinear, suggesting the presence of more than one class of acyl-CoA binding sites. Computer analyses of the binding data gave a best fit to the 2,4 two-class Scatchard model, suggesting the presence of two high-affinity primary binding sites (k1 = (1.55 +/- 0.46) x 10(-6) M-1) and four lower affinity secondary binding sites (k2 = (1.90 +/- 0.09) x 10(-8) M-1). Further analyses using the six parameter stoichiometric (stepwise) ligand binding model supports the existence of six binding sites with the higher affinities associated with the binding of the first mole of palmitoyl-CoA and weaker binding occurring after the first two sites are occupied. The association constants from this model of multiple binding diminish sequentially (i.e., K1 greater than K2 greater than K3 greater than...greater than or equal to K6), suggesting that each mol of long-chain acyl-CoA binds to BSA with decreasing affinities.     

Investigating the binding of curcumin derivatives to bovine serum albumin

The interaction of bovine serum albumin (BSA) with isoxazolcurcumin (IOC) and diacetylcurcumin (DAC) has been investigated. Binding constants obtained were found to be in the 10⁵ M^? 1 range. Minor conformational changes of BSA were observed from circular dichroism (CD) and Fourier transformed infrared (FT-IR) studies on binding. Based on Förster's theory of non-radiation energy transfer, the average binding distance, r between the donor (BSA) and acceptors IOC and DAC was found to be 3.79 and 4.27 nm respectively. Molecular docking of isoxazolcurcumin and diacetylcurcumin with bovine serum albumin indicated that they docked close to Trp 213, which is within the hydrophobic subdomain.     

Study on the binding of cerium to bovine serum albumin

The interaction of Ce(3+) to bovine serum albumin (BSA) has been investigated mainly by fluorescence spectra, UV-vis absorption spectra, and circular dichroism (CD) under simulative physiological conditions. Fluorescence data revealed that the quenching mechanism of BSA by Ce(3+) was a static quenching process, the binding constant is 6.70 × 10(5) , and the number of binding site is 1. The thermodynamic parameters (ΔH = -29.94 kJ mol(-1) , ΔG = -32.38 kJ mol(-1) , and ΔS = 8.05 J mol(-1) K(-1) ) indicate that electrostatic effect between the protein and the Ce(3+) is the main binding force. In addition, UV-vis, CD, and synchronous fluorescence results showed that the addition of Ce(3+) changed the conformation of BSA.     

Light scattering studies of the binding of bovine serum albumin to a cationic polyelectrolyte

Poly(dimethyldiallylammonium chloride) (PDMDAAC) exhibits a strong electrostatic interaction with bovine serum albumin (BSA) at pH 8.0 in 0.16M NaCl. Electrophoretic, dynamic, and static light scattering suggest that the mode of binding of BSA to PDMDAAC depends upon the weight concentration ratio (r) of BSA to PDMDAAC. When r is smaller than ca. 10, the system exhibits characteristics of cooperative binding, in that the BSA molecules are inhomogeneously distributed among the polymer chains, and free PDMDAAC molecules coexist with complex. When r reaches ca. 10, the amount of free PDMDAAC is too small to be observed. Further increase in r leads to a secondary binding process along with an increase in the amount of free protein. Hydrophobic interactions among the bound BSA are proposed as the driving force for the cooperative binding. © 1996 John Wiley & Sons, Inc.     

Interaction between felodipine and bovine serum albumin: fluorescence quenching study

The fluorescence quenching spectrum of bovine serum albumin (BSA) was investigated in the presence of felodipine (FLD) by spectroscopic methods including fluorescence spectroscopy and UV–Vis absorption spectroscopy. Stern–Volmer quenching was successfully applied and the corresponding thermodynamic parameters, namely enthalpy change (ΔH), free energy change (ΔG) and entropy change (ΔS) at different temperatures (304, 314 and 324 K) were calculated according to the Van't Hoff relation. This revealed that the hydrophobic interaction plays a major role in stabilizing the complex. The fluorescence spectrum of BSA was studied in presence of various concentrations of SDS surfactant. The distance (r) between donor (BSA) and acceptor (FLD) was obtained according to fluorescence resonance energy transfer (FRET). The synchronous fluorescence spectroscopy was used to investigate the effect of FLD on BSA molecule. The result shows that the conformation of BSA was changed in the presence of felodipine. Copyright © 2009 John Wiley & Sons, Ltd.     

Influence of succinylation of bovine serum albumin on its conformation and bilirubin binding

In order to investigate the role of lysine residues in the interaction of bilirubin with bovine serum albumin, five succinylated preparations of albumin, namely: 23%, 39%, 49%, 55% and 87%, were prepared, and their conformational and bilirubin-binding properties were studied by the techniques of gel filtration, ultraviolet and visible spectroscopy, and fluorescence quenching. Gel filtration experiments performed at pH 7.0 and ionic strengths 0.15 and 1.0 suggested that the albumin molecule undergoes gradual disorganization with increase in succinylation. The Stokes radius and frictional ratio at ionic strength 0.15 increased from 3.7 nm and 1.36, respectively, for the native protein to 6.3 nm and 2.26 for maximally (87%) succinylated albumin. Interestingly, increase in ionic strength to 1.0 caused significant refolding in succinylated preparations as evidenced by a decrease in Stokes radius and frictional ratio (5.3 nm and 1.90 for 87% succinylated albumin). Progressive succinylation produced a steady decline in the intensity of bilirubin-induced fluorescence quenching, and in the visible spectral changes of the bilirubin-albumin complex at 480 nm. Both of these changes had a good correlation with increase in Stokes radius. Increase in ionic strength to 1.0 produced a significant reversal in these properties. From these results we conclude that probably none of the surface lysine residues is involved in bilirubin-albumin interaction, and that if lysine residues are involved in this interaction they must be buried in the protein interior.     

Insights into the binding of paclitaxel to human serum albumin: multispectroscopic studies

The interaction of paclitaxel with human serum albumin (HSA) was studied using fluorescence, resonance light scattering, ultraviolet‐visible, circular dichroism and Fourier transform infrared spectroscopy at pH 7.4. Fluorescence data revealed that the fluorescence quenching of HSA by paclitaxel was a static quenching procedure. Time‐resolved fluorescence data also confirmed the quenching mode, which present a constant decay time of about 5 ns. The binding sites were approximately 1 and the binding constant suggested a weak association (324/M at 298 K), which is helpful for the release of the drug to targeted organs. The thermodynamic parameters, ΔG^○, ΔH° and ΔS° were calculated as – 1.06 × 10⁴ J/mol, 361 J/mol per K and 9.7 × 10⁴ J/mol respectively at 298 K, suggesting that binding was spontaneous and was driven mainly by hydrophobic interactions. The binding distance between HSA and paclitaxel was determined to be 2.23 nm based on the Förster theory. Analysis of circular dichroism, ultraviolet‐visible, three‐dimensional fluorescence, Fourier transform infrared and resonance light scattering spectra demonstrated that HSA conformation was slightly altered in the presence of paclitaxel and dimension of the individual HSA molecules were larger after interacting with paclitaxel. These results were confirmed by a molecular docking study. Copyright © 2013 John Wiley & Sons, Ltd.     

Chlorpheniramine binding to human serum albumin by fluorescence quenching measurements.

The binding of chlorpheniramine to human serum albumin has been studied by fluorescence quenching, as a function of temperature; the experimental data could only be fitted to the Stern-Volmer modified equation. A statistical analysis of the results was performed in order to determine the significance of the constants calculated by this equation, as well as their thermodynamic parameters. The chlorpheniramine binding to human serum albumin accounts for almost half of the binding of this antihistaminic agent to human plasma proteins.