Synthesis and characterization of triblock copolymers of methoxy poly(ethylene glycol) and poly(propylene fumarate)

Amphiphilic block copolymers were synthesized by transesterification of hydrophilic methoxy poly(ethylene glycol) (mPEG) and hydrophobic poly(propylene fumarate) (PPF) and characterized. Four block copolymers were synthesized with a 2:1 mPEG:PPF molar ratio and mPEGs of molecular weights 570, 800, 1960, and 5190 and PPF of molecular weight 1570 as determined by NMR. The copolymers synthesized with mPEG of molecular weights 570 and 800 had 1.9 and 1.8 mPEG blocks per copolymer, respectively, as measured by NMR, representing an ABA-type block copolymer. The number of mPEG blocks of the copolymer decreased with increasing mPEG block length to as low as 1.5 mPEG blocks for copolymer synthesized with mPEG of molecular weight 5190. At a concentration range of 5-25 wt % in phosphate-buffered saline, copolymers synthesized with mPEG molecular weights of 570 and 800 possessed lower critical solution temperatures (LCST) between 40 and 45 degrees C and between 55 and 60 degrees C, respectively. Aqueous solutions of copolymer synthesized with mPEG 570 and 800 also experienced thermoreversible gelation. The sol-gel transition temperature was dependent on the sodium chloride concentration as well as the mPEG block length. The copolymer synthesized from mPEG 570 had a transition temperature between 40 and 20 degrees C with salt concentrations between 1 and 10 wt %, while the sol-gel transition temperatures of the copolymer synthesized from mPEG molecular weight 800 were higher in the range 75-30 degrees C with salt concentrations between 1 and 15 wt %. These novel thermoreversible copolymers are the first biodegradable copolymers with unsaturated double bonds along their macromolecular chain that can undergo both physical and chemical gelation and hold great promise for drug delivery and tissue engineering applications.     

Amphiphilic poly(L-lactide)-b-dendritic poly(L-lysine)s synthesized with a metal-free catalyst and new dendron initiators: chemical preparation and characterization

This study presents investigations on new approaches to novel biodegradable amphiphilic poly(L-lactide)-b-dendritic poly(L-lysine)s bearing well-defined structures. First, two new Boc-protected poly(L-lysine) dendron initiators G(2)OH 4 (generation = 2) and G(3)OH 6 (generation = 3) with hydroxyl end functional groups were efficiently derived from corresponding precursors 3 and 5 via methyl ester substitution with ethanolamine. Subsequently, two series of new diblock copolymers of poly(L-lactide)-b-dendritic Boc-protected poly(L-lysine)s (S1-S2, S3-S4) were prepared in chloroform through ring-opening copolymerization of poly(L-lactide)s with a metal-free catalyst of organic 4-(dimethylamino) pyridine (DMAP) in the presence of a corresponding new poly(L-lysine) dendron initiator. Further, molecular structures of the prepared new dendron initiators as well as those of poly(L-lactide)-b-dendritic Boc-protected poly(L-lysine)s bearing different dendron blocks and PLLA lengths were examined by means of nuclear magnetic resonance spectroscopy (NMR), gel permeation chromatography (GPC), mass spectrometry (ESI-MS, MALDI-FTMS), and thermal gravimetric analysis (TGA). The results demonstrated successful formation of the synthetic precursors, functional dendron initiators, and new diblock copolymers. In addition, the very narrow molecular weight distributions (PDI = 1.10-1.14) of these poly(L-lactide)-b-dendritic Boc-protected poly(L-lysine)s further indicated their well-defined molecular structures. After the efficient Boc-deprotection for the dendron amino groups with TFA/CH(2)Cl(2), new diblock poly(L-lactide)-b-dendritic poly(L-lysine)s bearing lipophilic PLLA and hydrophilic dendritic PLL were finally prepared. It was noteworthy that the MALDI-FTMS result showed that no appreciable intermolecular chain transesterification happened during the ROP of L-lactide catalyzed by the DMAP. Moreover, self-assembly of these new biodegradable amphiphilic copolymers in diverse solvents were also preliminarily studied.     

Block copolymers and melt blends of polylactide with Nodax microbial polyesters: preparation and mechanical properties

Completely renewable resource-based, degradable composites of poly(l-lactide) and Nodax [poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)] were prepared by a melt blending procedure. oligoNodax-b-poly(l-lactide) diblock copolymers were synthesized and their use as compatibilizers in these melt blends was investigated. The block copolymers were prepared from microbially produced Nodax polyhydroxyalkanoate by a two-step transesterification and macroinitiator ring opening polymerization method. Addition of Nodax increased the notched Izod impact resistance of the binary blends compared to that of PLLA homopolymer (44+/-6 J m(-1) versus 22+/-2 J m(-1), respectively). Further addition of the oligoNodax-b-poly(l-lactide) block copolymers to form ternary blends resulted in composites with improved dispersion and decreased Nodax particle size, but no additional improvement in the notched Izod impact properties. Significant Nodax degradation during processing coupled with a high Nodax entanglement molecular weight, as well as crystallization and low impact resistance of the Nodax dispersed phase are implicated as major factors impeding further toughening.     

Biosynthesis of poly(3-hydroxybutyrate) copolymers by Azotobacter chroococcum 7B: A precursor feeding strategy

A precursor feeding strategy for effective biopolymer producer strain Azotobacter chroococcum 7B was used to synthesize various poly(3-hydroxybutyrate) (PHB) copolymers. We performed experiments on biosynthesis of PHB copolymers by A. chroococcum 7B using various precursors: sucrose as the primary carbon source, various carboxylic acids and ethylene glycol (EG) derivatives [diethylene glycol (DEG), triethylene glycol (TEG), poly(ethylene glycol) (PEG) 300, PEG 400, PEG 1000] as additional carbon sources. We analyzed strain growth parameters including biomass and polymer yields as well as molecular weight and monomer composition of produced copolymers. We demonstrated that A. chroococcum 7B was able to synthesize copolymers using carboxylic acids with the length less than linear 6C, including poly(3-hydroxybutyrate-co-3-hydroxy-4-methylvalerate) (PHB-4MHV) using Y-shaped 6C 3-methylvaleric acid as precursor as well as EG-containing copolymers: PHB–DEG, PHB–TEG, PHB–PEG, and PHB–HV–PEG copolymers using short-chain PEGs (with n?≤?9) as precursors. It was shown that use of the additional carbon sources caused inhibition of cell growth, decrease in polymer yields, fall in polymer molecular weight, decrease in 3-hydroxyvalerate content in produced PHB–HV–PEG copolymer, and change in bacterial cells morphology that were depended on the nature of the precursors (carboxylic acids or EG derivatives) and the timing of its addition to the growth medium.     

Novel synthesis of functionalized poly(3-hydroxybutanoic acid) and its copolymers.

Novel feasibility of fuctionalized poly(3-hydroxybutanoic acid), PHB, and its copolymers synthesis via ring-opening of beta-butyrolactone (ROP) mediated by activated anionic initiators or enzymes in vitro is presented. Using these new synthetic approaches, PHB with defined chemical structure of the end groups as well as block, graft and random copolymers have been obtained and characterized by IR, NMR, ESI-MS and GPC techniques. The relationship between the structure and properties of the novel polymeric materials prepared is discussed.     

Self-assembling diblock copolymers of poly[N-(2-hydroxypropyl)methacrylamide] and a beta-sheet peptide

The self-assembly of hybrid diblock copolymers composed of poly(HPMA) and beta-sheet peptide P11 (CH(3)CO-QQRFQWQFEQQ-NH(2)) blocks was investigated. Copolymers were synthesized via thiol-maleimide coupling reaction, by conjugation of semitelechelic poly(HPMA)-SH with maleimide-modified beta-sheet peptide. As expected, CD and CR binding studies showed that the peptide block imposed its beta-sheet structural arrangement on the structure of diblock copolymers. TEM and AFM proved that peptide and these copolymers had the ability to self-assemble into fibrils.     

Comparison of phbC genes cloned from Ralstonia eutropha and Alcaligenes latus for utilization in metabolic engineering of polyhydroxyalkanoate biosynthesis

Two cloned phbC genes, encoding polyhydroxybutyrate (PHB) synthase from Ralstonia eutropha and from Alcaligenes latus, were transformed into a PHB-negative mutant of R. eutropha. The expression characteristics of both genes were compared for the biosyntheses of PHB and its copolymers. Each phbC gene had different characteristics not only in the biosyntheses of PHB, poly(3-hydroxybutyrate-3-hydroxy-valerate), and poly(3-hydroxybutyrate-4-hydroxybutyrate) but also in the resulting morphology of PHB granules.     

New biodegradable thermogelling copolymers having very low gelation concentrations

New biodegradable multiblock amphiphilic and thermosensitive poly(ether ester urethane)s consisting of poly[(R)-3-hydroxybutyrate] (PHB), poly(ethylene glycol) (PEG), and poly(propylene glycol) (PPG) blocks were synthesized, and their aqueous solutions were found to undergo a reversible sol-gel transition upon temperature change at very low copolymer concentrations. The multiblock poly(ether ester urethane)s were synthesized from diols of PHB, PEG, and PPG using 1,6-hexamethylene diisocyanate as a coupling reagent. The chemical structures and molecular characteristics of the copolymers were studied by GPC, 1H NMR, 13C NMR, and FTIR. The thermal stability of the poly(PEG/PPG/PHB urethane)s was studied by thermogravimetry analysis (TGA), and the PHB contents were calculated based on the thermal degradation profile. The results were in good agreement with those obtained from the 1H NMR measurements. The poly(PEG/PPG/ PHB urethane)s presented better thermal stability than the PHB precursors. The water soluble poly(ether ester urethane)s had very low critical micellization concentration (CMC). Aqueous solutions of the new poly(ether ester urethane)s underwent a sol-gel-sol transition as the temperature increased from 4 to 80 degrees C, and showed a very low critical gelation concentration (CGC) ranging from 2 to 5 wt %. As a result of its multiblock architecture, a novel associated micelle packing model can be proposed for the sol-gel transition for the copolymer gels of this system. The new material is thought to be a promising candidate for injectable drug systems that can be formulated at low temperatures and forms a gel depot in situ upon subcutaneous injection.     

Degradation of polyesters by a novel marine Nocardiopsis aegyptia sp. nov.: application of Plackett-Burman experimental design for the improvement of PHB depolymerase activity

This is the first report on the degradation of poly(3-hydroxybutyrate) (PHB), and its copolymers poly(3-hydroxyvalerate) P(3HB-co-10-20% HV) by Nocardiopsis aegyptia, a new species isolated from marine seashore sediments. The strain excreted an extracellular PHB depolymerase and grew efficiently on PHB or its copolymers as the sole carbon sources. The degradation activity was detectable by the formation of a transparent clearing zone around the colony on an agar Petri plate after 25 days, or a clearing depth under the colony in test tubes within 3 weeks. The previous techniques proved that the bacterium was able to assimilate the monomeric components of the shorter alkyl groups of the polymers. Nocardiopsis aegyptia hydrolyzed copolymers 10-20% PHBV more rapidly than the homopolymer PHB. The bacterial degradation of the naturally occurring sheets of poly(3-hydroxybutyrate), and its copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) was observed by scanning electron microscopy (SEM). The samples were degraded at the surface and proceeded to the inner part of the materials. Clear morphological alterations of the polymers were noticed, indicating the degradative capability of the bacterium. Plackett-Burman statistical experimental design has been employed to optimize culture conditions for maximal enzyme activity. The main factors that had significant positive effects on PHB depolymerase activity of Nocardiopsis aegyptia were sodium gluconate, volume of medium/flask and age of inoculum. On the other hand, MgSO4.7H2O, KH2PO4, K2HPO4 and NH4NO3 exhibited negative effects. Under optimized culture conditions, the highest activity (0.664 U/mg protein) was achieved in a medium predicted to be near optimum containing (in g/L): PHB, 0.5; C6H11O7Na, 7.5; MgSO4.7H2O, 0.35; K2HPO4, 0.35; NH4NO3, 0.5; KH2PO4, 0.35; malt extract, 0.5 and prepared with 50% seawater. The medium was inoculated with 1% (v/v) spore suspension of 7 days old culture. Complete clarity of the medium was achieved after 3 days at 30 degrees C.     

Contact angle, WAXS, and SAXS analysis of poly(beta-hydroxybutyrate) and poly(ethylene glycol) block copolymers obtained via Azotobacter vinelandii UWD

This study investigated and correlated physical properties and cell interactions of copolymers obtained by a poly(ethylene glycol) (PEG)-modulated fermentation of Azotobacter vinelandii UWD. PEGs with molecular weights of 400 and 3400 Da and di(ethylene glycol) (DEG) were used to modulate the bacterial synthesis of poly(beta-hydroxybutyrate) (PHB). The PHB crystallinity was determined by wide-angle X-ray scattering (WAXS). Small-angle X-ray scattering (SAXS) showed that lamellar distances decreased between the PHB and the PHB modulated with PEG or DEG. Furthermore, the contact angle of water on the PHB/PEG polymer surfaces decreased when compared to that of PHB. The significant decrease of the contact angle and corresponding increase in surface tension, as well as significant decrease in cell adhesion, suggest the presence of hydrophilic PEG and DEG within the hydrophobic surface.     

Enzymatic degradation of block copolymers prepared from epsilon-caprolactone and poly(ethylene glycol)

Block copolymers were prepared by ring-opening polymerization of epsilon-caprolactone in the presence of monohydroxyl or dihydroxyl poly(ethylene glycol) (PEG), using Zn powder as catalyst. The resulting poly(epsilon-caprolactone) (PCL)-PEG diblock and PCL-PEG-PCL triblock copolymers were characterized by various analytical techniques such as NMR, size-exclusion chromatography, differential scanning calorimetry, and X-ray diffraction. Both copolymers were semicrystalline polymers, the crystalline structure being of the PCL type. Films were prepared by casting dichloromethane solutions of the polymers on a glass plate. Square samples with dimensions of 10 x 10 mm were allowed to degrade in a pH = 7.0 phosphate buffer solution containing Pseudomonas lipase. Data showed that the introduction of PEG blocks did not decrease the degradation rate of poly(epsilon-caprolactone).     

Multiblock copolymers of L-lactide and trimethylene carbonate

Sequential copolymerizations of trimethylene carbonate (TMC) and l-lactide (LLA) were performed with 2,2-dibutyl-2-stanna-1,3-oxepane as a bifunctional cyclic initiator. The block lengths were varied via the monomer/initiator and via the TMC/l-lactide ratio. The cyclic triblock copolymers were transformed in situ into multiblock copolymers by ring-opening polycondensation with sebacoyl chloride. The chemical compositions of the block copolymers were determined from (1)H NMR spectra. The formation of multiblock structures and the absence of transesterification were proven by (13)C NMR spectroscopy. Differential scanning calorimetry (DSC), wide-angle X-ray scattering (WAXS), and dynamic mechanical analysis (DMA) measurements confirmed the existence of a microphase-separated structure in the multiblock copolymers consisting of a crystalline phase of poly(LLA) blocks and an amorphous phase formed by the poly(TMC) blocks. Stress-strain measurements showed the elastomeric character of these biodegradable multiblock copolymers, particularly in copolymers having epsilon-caprolactone as comonomer in the poly(TMC) blocks.     

Micellization phenomena of amphiphilic block copolymers based on methoxy poly(ethylene glycol) and either crystalline or amorphous poly(caprolactone-b-lactide)

This study focuses on the aggregation behavior of the biodegradable amphiphilic block copolymers based on methoxy poly(ethylene glycol) (mPEG) as a hydrophilic block and either crystalline poly(caprolactone-b-l-lactide) (P(CL-LLA)) or amorphous poly(caprolactone-b-D,L-lactide) (P(CL-DLLA)) as a hydrophobic block. These block copolymers have a strong tendency to form micelles in aqueous medium, with very low critical micelle concentrations (CMCs). The CMC of P(CL-LLA)-b-mPEG is higher than that of P(CL-DLLA)-b-mPEG when the mPEG block has the same molecular weight. Furthermore, the partition equilibrium coefficient (K(v)) of pyrene in the micellar solution of P(CL-LLA)-b-mPEG copolymer was lower than that of P(CL-DLLA)-b-mPEG copolymer when the mPEG block was the same length. These differences were believed to be related to the physical state of the core-forming blocks, i.e., the crystalline P(CL-LLA) block and the amorphous P(CL-DLLA) block. The TEM images showed that micelles formed by P(CL-LLA)-b-mPEG assembled in a cylindrical morphology, whereas those formed by P(CL-DLLA)-b-mPEG took a classical spherical shape. In addition, with differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXD) analyses, it is believed that the crystallization tendency of the core-forming blocks is the main factor governing the morphology of micelles in water. A possible mechanism for the cylindrical assembly morphology was discussed.     

Synthesis, characterization, and morphology studies of biodegradable amphiphilic poly[(R)-3-hydroxybutyrate]-alt-poly(ethylene glycol) multiblock copolymers

Novel biodegradable amphiphilic alternating block copolymers based on poly[(R)-3-hydroxybutyrate] (PHB) as biodegradable and hydrophobic block and poly(ethylene glycol) (PEG) as hydrophilic block (PHB-alt-PEG) were successfully synthesized through coupling reaction. Their chemical structures have been characterized by using gel permeation chromatography, (1)H nuclear magnetic resonance, and Fourier transform infrared spectroscopy. Differential scanning calorimetry (DSC) analysis revealed that both PHB and PEG blocks in PHB-alt-PEG block copolymers can crystallize to form separate crystalline phase except in those with a short PEG block (M(n) 600) only PHB crystalline phase has been observed. However, due to the mutual interference from each other, the melting transition of both PHB and PEG crystalline phases shifted to lower temperature with lower crystallinity in comparison with corresponding pure PHB and PEG. The crystallization behavior of PHB block and PEG block has also been studied by X-ray diffraction, and the results were in good agreement with those deduced from DSC study. The surface morphologies of PHB-alt-PEG block copolymer thin films spin-coated on mica have been visualized by atomic force microscopy with tapping mode, indicating formation of laterally regular lamellar surface patterns. Static water contact angle measurement revealed that surface hydrophilicity of these spin-coated thin films increases with increasing PEG block content.     

Physical properties of poly(hydroxybutyrate) and copolymers of hydroxybutyrate and hydroxyvalerate

Abstract The major physical properties of poly(hydroxybutyrate) (PHB) and its copolymers with hydroxyvalerate (PHB/HV) and those of their blends are summarised. Cases of liquid-liquid phase separation in homopolymer copolymer blends are reported and conditions where further phase separation occurs during crystallisation are documented. The crystallinity and degree of comonomer inclusion in the crystallisation of copolymers are described and quantified. It is argued that the mechanism for the inclusion of comonomer units in the crystals is of a kinetic rather than an equilibrium nature.     

Association behavior of biotinylated and non-biotinylated poly(ethylene oxide)-b-poly(2-(diethylamino)ethyl methacrylate)

Biotinylated and non-biotinylated copolymers of poly(ethylene oxide) (PEO) and poly(2-(diethylamino)ethyl methacrylate) (PDEAEMA) were synthesized by the atom transfer radical polymerization technique. The chemical compositions of the copolymers as determined by NMR are represented by PEO(113)PDEAEMA(70) and biotin-PEO(104)PDEAEMA(93), respectively. The aggregation behavior of these polymers in aqueous solutions at different pHs and ionic strengths was studied using a combination of potentiometric titration, dynamic light scattering, static light scattering, and transmission electron microscopy. Both PEO-b-PDEAEMA and biotin-PEO-b-PDEAEMA diblock copolymers form micelles at high pH with hydrodynamic radii (R(h)) of about 19 and 23 nm, respectively. At low pH, the copolymers are dispersed as unimers in solution with R(h) values of about 6-7 nm. However, at a physiological salt concentration (c(s)) of about 0.16 M NaCl and a pH of 7-8, the copolymers form large loosely packed Gaussian chains, which were not present at the low c(s) of 0.001 M NaCl. The critical micelle concentrations (cmc's) and the cytotoxicities of the copolymers were investigated to determine a suitable polymer concentration range for future biological applications. Both PEO-b-PDEAEMA and biotin-PEO-b-PDEAEMA diblock copolymers possess identical cmc values of about 0.0023 mg/g, while the cytotoxicity test indicated that the copolymers are not toxic up to 0.05 mg/g (>83% cell survival at this concentration).     

Synthesis, characterization, and bioavailability of mannosylated shell cross-linked nanoparticles

Saccharide-functionalized shell cross-linked (SCK) polymer micelles designed as polyvalent nanoscaffolds for selective interactions with receptors on Gram negative bacteria were constructed from mixed micelles composed of poly(acrylic acid-b-methyl acrylate) and mannosylated poly(acrylic acid-b-methyl acrylate). The mannose unit was conjugated to the hydrophilic chain terminus of the amphiphilic diblock copolymer precursor, from which the SCK nanoparticles were derived, by the growth of the diblock copolymer from a mannoside functionalized atom transfer radical polymerization (ATRP) initiator. Mixed micelle formation between the amphiphilic diblock copolymer and mannosylated amphiphilic diblock copolymer was followed by condensation-based cross-linking between the acrylic acid residues present in the periphery of the polymer micelles to afford SCK nanoparticles. SCKs presenting variable numbers of mannose functionalities were prepared from mixed micelles of controlled stoichiometric ratios of mannosylated and nonmannosylated diblock copolymers. The polymer micelles and SCKs were characterized by dynamic light scattering (DLS), electrophoretic light scattering, atomic force microscopy (AFM), transmission electron microscopy (TEM), and analytical ultracentrifugation (AU). Surface availability and bioactivity of the mannose units were evaluated by interactions of the nanostructures with the model lectin Concanavalin A via DLS studies, with red blood cells (rabbit) via agglutination inhibition assays and with bacterial cells (E. coli) via TEM imaging.     

Biodegradable interpolyelectrolyte complexes based on methoxy poly(ethylene glycol)-b-poly(alpha,L-glutamic acid) and chitosan

We synthesized methoxy poly(ethylene glycol)-b-poly(alpha,L-glutamic acid) (mPEGGA) diblock copolymer by ring-opening polymerization of N-carboxy anhydride of gamma-benzyl-L-glutamate (NCA) using amino-terminated methoxy polyethylene glycol (mPEG) as macroinitiator. Polyelectrolyte complexation between mPEGGA as neutral-block-polyanion and chitosan (CS) as polycation has been scrutinized in aqueous solution as well as in the solid state. Water-soluble polyelectrolyte complexes (PEC) can be formed only under nonstoichiometric condition while phase separation is observed when approaching 1:1 molar mixing ratio in spite of the existence of hydrophilic mPEG block. This is likely due to mismatch in chain length between polyanion block of the copolymer and the polycation or hydrogen bonding between the components. Hydrodynamic size of primary or soluble PEC is determined to be about 200 nm, which is larger than those reported in some literatures. The increase in polyion chain length of the copolymer leads to the increase in the hydrodynamic size of the water-soluble PEC. Formation of spherical micelles by the mPEGGA/CS complex at nonstoichiometirc condition has been confirmed by the scanning electron microscopy observation and transmission electron microscopy observations. The homopolymer CS experiences attractive interaction with both mPEGA and PGA blocks within the copolymer. Competition of hydrogen bonding and electrostatic force in the system or hydrophilic mPEG segments weakens the electrostatic interaction between the oppositely charged polyions. The existence of hydrogen bonding restrains the mobility of mPEG chains of the copolymer and completely prohibits crystallization of mPEG segments. In vitro culture of human fibroblasts indicates that mPEGGA/CS-based materials have potential in biomedical application, especially in tissue engineering.     

Synthesis and characterization of six-arm star poly(delta-valerolactone)-block-methoxy poly(ethylene glycol) copolymers

Novel amphiphilic six-arm star diblock copolymers based on biocompatible and biodegradable poly(delta-valerolactone) (PVL) and methoxy poly(ethylene glycol) (MePEG) were synthesized by a two-step process. First, the hydrophobic star-shaped PVL with hydroxyl terminated functional groups was synthesized using a multifunctional alcohol, dipentaerythritol (DPE), as the initiator and fumaric acid as the catalyst. The amphiphilic six-arm star copolymer of poly(delta-valerolactone)-b-methoxy poly(ethylene glycol), (PVL-b-MePEG)(6), was then synthesized by coupling the hydroxyl terminated six-arm PVL homopolymer with alpha-methoxy-omega-chloroformate-poly(ethylene glycol) (MePEG-COCl). (1)H NMR and GPC analyses confirmed the successful synthesis of star-shaped copolymers with predicted compositions and narrow molecular weight distributions. DSC analysis revealed that the glass transition temperatures of the star PVL homopolymers with M(n) between 5000 and 49 000 are not dependent on their molecular weights, whereas the melting temperatures of both the PVL homopolymers and the amphiphilic (PVL-b-MePEG)(6) copolymers increase with an increase in the PVL molecular weight. Micelles were prepared from the (PVL-b-MePEG)(6) copolymers via the dialysis method and found to have effective mean diameters ranging from 10 to 45 nm, depending on the copolymer composition. In addition, the (PVL-b-MePEG)(6) copolymers having lower PVL content were found to form micelles with a narrow monomodal size distribution, whereas the copolymers having higher PVL content tended to form aggregates with a bimodal size distribution. The noncytotoxicity of the copolymers was also confirmed in CHO-K1 fibroblast cells using a cell viability assay, indicating that the (PVL-b-MePEG)(6) copolymers are suitable for biomedical applications such as drug delivery.     

Synthesis and self-association behavior of biodegradable amphiphilic poly[bis(ethyl glycinat-N-yl)phosphazene]- poly(ethylene oxide) block copolymers

Amphiphilic diblock copolymers with varying compositions of hydrophilic poly(ethylene oxide) (PEO) and hydrophobic poly[bis(ethyl glycinat-N-yl)phosphazene] (PNgly) were synthesized via the controlled cationic-induced polymerization of a phosphoranimine (Cl(3)P=NSiMe(3)) at ambient temperature using a PEO-phosphoranimine macroinitiator. The aqueous-phase transition behavior of PEO-PNgly-3 (M(n) = 10,000) and micelle formation of both PEO-PNgly-3 and PEO-PNgly-4 (M(n) = 8,500) were investigated using fluorescence techniques and dynamic light scattering. The critical micelle concentrations (cmc's) of PEO-PNgly-3 and PEO-PNgly-4 were determined to be 3 and 12 mg/L with the mean diameters of micelles being 120 and 130 nm, respectively. The hydrolytic degradation of these diblock copolymers was also studied in solution. These studies coupled with the biodegradability of the poly[bis(ethyl glycinat-N-yl)phosphazene] block to give benign products make PEO-PNgly copolymers well-suited for a wide variety of biomedical applications including novel biodegradable drug-delivery systems.