Biosynthesis and properties of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) polymers

In support of programs to identify polyhydroxyalkanoates with improved materials properties, we report on our efforts to characterize the mechanical and thermal properties of copolyesters of 3-hydroxybutyrate (3HB) and 3-hydroxyhexanoate (3HHx). The copolyesters, having molar fraction of 3HHx ranging from 2.5 to 35 mol % and average molecular weights ranging from 1.15 x 10(5) to 6.65 x 10(5), were produced by fermentation using Aeromonas hydrophila and a recombinant strain of Pseudomonas putida GPp104. The polymers were chloroform extracted and characterized by solution-state and solid-state nuclear magnetic resonance (NMR) spectroscopy and a variety of mechanical and thermal tests. Solution-state (1)H NMR data were used to determine polymer composition-of-matter, while solution-state (13)C NMR data provided polymer-sequence information. Solvent fractionation and NMR spectroscopic characterization of these polymers showed that polymers containing up to 9.5 mol % 3HHx had a Bernoullian compositional distribution. By contrast, polymers containing more than 9.5 mol % 3HHx had a bimodal polymer composition. Solvent fractionation of these 3HHx-rich polyesters produced two polymer fractions, each of which was again consistent with Bernoullian polymerization statistics. Solid-state NMR relaxation experiments provided insight into aging in poly(3HB-co-3HHx) copolymers, demonstrating increased polymer-chain motion with increasing 3HHx content. The elongation-to-break ratio in the polyesters increased with increasing molar fraction of 3HHx monomers. Aging properties of the poly(3HB-co-3HHx) copolymers were very similar to copolymers of 3HB and 3-hydroxyvalerate (3HV). However, poly(3HB-co-3HHx) exhibited increased activation energy to thermal degradation with increasing 3HHx content.     

Industrial scale production of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)

Large scale production of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(3HB-co-3HHx)] by Aeromonas hydrophila 4AK4 was examined in a 20,000 l fermentor. Cells were first grown using glucose as a carbon source, and polyhydroxyalkanoate (PHA) biosynthesis was triggered by the addition of lauric acid under conditions of limited nitrogen or phosphorus. When cells first grown in a medium containing 50 g glucose l(-1) were further cultivated after the addition of 50 g lauric acid l(-1) under phosphorus limitation, a final cell concentration, PHA concentration and PHA content of 50 g l(-1), 25 g l(-1), and 50 wt%, respectively, were obtained in 46 h, equivalent to PHA productivity of 0.54 g l(-1)t h(-1). The copolymer produced was found to be a random copolymer, and the 3HHx fraction was 11 mol%.     

Viscoelastic relaxations and thermal properties of bacterial poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and poly(3-hydroxybutyrate-co-4-hydroxybutyrate)

3-Hydroxybutyrate-3-hydroxyvalerate (3HB-3HV) as well as 3-hydroxybutyrate-4-hydroxybutyrate (3HB-4HB) copolyesters have been investigated by differential scanning calorimetry, thermogravimetric analysis and dynamic mechanical spectroscopy, over a wide range of compositions (0-95 mol% 3HV; 0-82 mol% 4HB). Both series of isolated copolyesters are partially crystalline at all compositions. Quenched samples show a glass transition that decreases linearly with increasing co-monomer molar fraction, more markedly when the co-monomer is 4HB. Above Tg, all copolyesters, rich in 3HB units, show a cold crystallization phenomenon followed by melting, while at the other end crystallization on heating is observed only in 3HB-3HV copolymers. The viscoelastic spectrum, strongly affected by thermal history, shows two relaxation regions: the glass transition, whose location depends on copolymer type and composition, and a secondary dispersion region at low temperatures (-130/-80 degrees C). The latter results from a water-related relaxation analogous to that of P(3HB) and, in 3HB-4HB copolymers, from another overlapping absorption peak centered at -130 degrees C, attributed to local motion of the methylene groups in the linear 4HB units.     

Production of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) by high-cell-density cultivation of Aeromonas hydrophila

The newly screened Aeromonas hydrophila produces copolymer consisting of 3-hydroxybutyrate (3HB) and 3-hydroxyhexanoate (3HHx). The characteristics of cell growth and polymer accumulation were examined using various carbon sources. P(3HB-co-3HHx) was produced from lauric acid and oleic acid only. P(3HB-co-3HHx) content can be increased by limitation of phosphorus. A maximal P(3HB-co-3HHx) content of 28.8 wt% could be obtained in flask culture. By applying the optimally designed nutrient feeding strategy, cell dry weight, P(3HB-co-3HHx) content, and 3HHx fraction obtained over the course of 43 h were 95.7 g/L, 45.2 wt%, and 17 mol%, respectively, resulting in a productivity of 1.01 g polyhydroxyalkanoate (PHA)/L. h.     

Biosynthesis of poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-3-hydroxyhexanoate) by metabolically engineered Escherichia coli strains

The recombinant Escherichia coli strain, equipped with the newly cloned Aeromonas PHA biosynthesis genes, could produce a terpolymer of 3-hydroxybutyrate (3HB), 3-hydroxyvalerate (3HV), and 3-hydroxyhexanoate (3HHx) [P(3HB-co-3HV-co-3HHx)] from dodecanoic acid plus odd carbon number fatty acid. In addition, the orf1 gene of Aeromonas hydrophila was found to play a critical role in assimilating the 3HV monomer and in regulating the monomer fraction in the terpolymer.     

Metabolic engineering of Aeromonas hydrophila for the enhanced production of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)

Wild-type Aeromonas hydrophila 4AK4 produced 35–45 wt.% poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) consisting of 10–15 mol% 3-hydroxyhexanoate (3HHx). To enhance PHBHHx production, vgb gene encoding Vitreoscilla haemoglobin or fadD gene encoding Escherichia coli acyl-CoA synthase was co-expressed with polyhydroxyalkanoates (PHA) synthesis-related genes including phbAB from Wautersia eutropha and phaPCJ from A. hydrophila. Expression of vgb increased PHBHHx content from 46 to 53 wt.% without affecting the polymer monomers composition, whereas fadD increased both PHBHHx content from 46 to 64 wt.% and its 3HHx fraction from 15 to 24 mol%. Co-expression of vgb or fadD gene with PHA-synthesis-related genes generally increased PHBHHx content over 60 wt.%. Co-expression of phbAB with vgb increased PHBHHx content and concentration up to about 70 wt.% and 4.0 g l⁻¹, respectively. Fermentor study also showed that in the recombinants harboring vgb, CDW, PHBHHx concentration and productivity were significantly elevated up to 54 g l⁻¹, 28.5 g l⁻¹ and 0.791 g l⁻¹ h⁻¹, respectively, suggesting that vgb could promote PHA synthesis. In this strain, lac promoter could be used to constitutively express foreign genes such as phbA and phbB encoding β-ketothiolase and NADPH-dependent acetoacetyl-CoA reductase of W. eutropha, respectively, without use of IPTG. The results showed that combined expression of different genes was a successful strategy to enhance PHA production, which could be useful for strain development to construct other recombinant PHA-producing strains.     

Production of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) from plant oil by engineered Ralstonia eutropha strains

The polyhydroxyalkanoate (PHA) copolymer poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(HB-co-HHx)] has been shown to have potential to serve as a commercial bioplastic. Synthesis of P(HB-co-HHx) from plant oil has been demonstrated with recombinant Ralstonia eutropha strains expressing heterologous PHA synthases capable of incorporating HB and HHx into the polymer. With these strains, however, short-chain-length fatty acids had to be included in the medium to generate PHA with high HHx content. Our group has engineered two R. eutropha strains that accumulate high levels of P(HB-co-HHx) with significant HHx content directly from palm oil, one of the world's most abundant plant oils. The strains express a newly characterized PHA synthase gene from the bacterium Rhodococcus aetherivorans I24. Expression of an enoyl coenzyme A (enoyl-CoA) hydratase gene (phaJ) from Pseudomonas aeruginosa was shown to increase PHA accumulation. Furthermore, varying the activity of acetoacetyl-CoA reductase (encoded by phaB) altered the level of HHx in the polymer. The strains with the highest PHA titers utilized plasmids for recombinant gene expression, so an R. eutropha plasmid stability system was developed. In this system, the essential pyrroline-5-carboxylate reductase gene proC was deleted from strain genomes and expressed from a plasmid, making the plasmid necessary for growth in minimal media. This study resulted in two engineered strains for production of P(HB-co-HHx) from palm oil. In palm oil fermentations, one strain accumulated 71% of its cell dry weight as PHA with 17 mol% HHx, while the other strain accumulated 66% of its cell dry weight as PHA with 30 mol% HHx.     

Cloning and analysis of the poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) biosynthesis genes of Aeromonas caviae.

A 5.0-kbp EcoRV-EcoRI restriction fragment was cloned and analyzed from genomic DNA of Aeromonas caviae, a bacterium producing a copolyester of (R)-3-hydroxybutyrate (3HB) and (R)-3-hydroxyhexanoate (3HHx) [P(3HB-co-3HHx)] from alkanoic acids or oils. The nucleotide sequence of this region showed a 1,782-bp poly (3-hydroxyalkanoate) (PHA) synthase gene (phaC(Ac) [i.e., the phaC gene from A. caviae]) together with four open reading frames (ORF1, -3, -4, and -5) and one putative promoter region. The cloned fragments could not only complement PHA-negative mutants of Alcaligenes eutrophus and Pseudomonas putida, but also confer the ability to synthesize P(3HB-co-3HHx) from octanoate or hexanoate on the mutants' hosts. Furthermore, coexpression of ORF1 and ORF3 genes with phaC(Ac) in the A. eutrophus mutant resulted in a decrease in the polyester content of the cells. Escherichia coli expressing ORF3 showed (R)-enoyl-coenzyme A (CoA) hydratase activity, suggesting that (R)-3-hydroxyacyl-CoA monomer units are supplied via the (R)-specific hydration of enoyl-CoA in A. caviae. The transconjugant of the A. eutrophus mutant expressing only phaC(Ac) effectively accumulated P(3HB-co-3HHx) up to 96 wt% of the cellular dry weight from octanoate in one-step cultivation.     

Gelatin blending improves the performance of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) films for biomedical application

To improve the performance of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx), gelatin was blended with PHBHHx at different ratios. With increasing gelatin content, the weight loss of gelatin/PHBHHx blend in simulated body fluid at 37 degrees C was accelerated. After 2 months, there was about 15% weight loss in PHBHHx blending with 30% gelatin. Scanning electron microscopy and X-ray diffraction results showed that gelatin blending increased the surface porosity and decreased the crystallinity, which may be responsible for the acceleration of the weight loss. Second harmonic generation results indicated that 10% gelatin blending had less disruption to PHBHHx spatial structure, resulting in better tensile mechanical properties. At the same time, increased surface porosity and decreased crystallinity caused by gelatin incorporation may be beneficial for cell growth compared with pure PHBHHx. All these indicated that gelatin incorporation may improve the performances of PHBHHx to meet the need of different situations during medical implantation.     

Engineered Aeromonas hydrophila for enhanced production of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) with alterable monomers composition

Aeromonas hydrophila 4AK4 produces poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) containing 3-hydroxybutyrate (3HB) and about 15 mol% 3-hydroxyhexanoate (3HHx) from dodecanoate. To study the factors affecting the monomer composition and PHBHHx content, genes encoding phasin (phaP), PHA synthase (phaC) and (R)-specific enoyl-CoA hydratase (phaJ) from Aeromonas punctata (formerly named Aeromonas caviae) were introduced individually or jointly into A. hydrophila 4AK4. The phaC gene increased 3HHx fraction more significantly than phaP, while phaJ had little effect. Expression of phaC alone increased the 3HHx fraction from 14 to 22 mol%. When phaC was co-expressed with phaP and phaJ, the 3HHx fraction increased from 14 to 34 mol%. Expression of phaP or phaC alone or with another gene enhanced PHBHHx content up to 64%, cell dry weight (CDW) as much as 4.4 gL(-1) and PHBHHx concentration to 2.7 gL(-1) after 48 h in shake flask culture. The results suggest that a higher PHA synthase activity could lead to a higher 3HHx fraction and PHBHHx content. Co-expression of phaJ with phaC or phaP would favor PHA accumulation, although over-expression of phaJ did not affect PHA synthesis much. In addition, inhibition of beta-oxidation by acrylate in A. hydrophila 4AK4 enhanced PHBHHx content. However, no monomers longer than 3HHx were detected. The results show that genetic modification of A. hydrophila 4AK4 enhanced PHBHHx production and altered monomer composition of the polymer.     

Production of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) by Ralstonia eutropha in high cell density palm oil fermentations

Improved production costs will accelerate commercialization of polyhydroxyalkanoate (PHA) polymer and PHA-based products. Plant oils are considered favorable feedstocks, due to their high carbon content and relatively low price compared to sugars and other refined carbon feedstocks. Different PHA production strategies were compared using a recombinant strain of Ralstonia eutropha that produces high amounts of P(HB-co-HHx) when grown on plant oils. This R. eutropha strain was grown to high cell densities using batch, extended batch, and fed batch fermentation strategies, in which PHA accumulation was triggered by nitrogen limitation. While extended batch culture produced more biomass and PHA than batch culture, fed batch cultivation was shown to produce the highest levels of biomass and PHA. The highest titer achieved was over 139 g/L cell dry weight (CDW) of biomass with 74% of CDW as PHA containing 19 mol% HHx. Our data suggest that the fermentation process is scalable with a space time yield (STY) better than 1 g PHA/L/h. The achieved biomass concentration and PHA yield are among the highest reported for the fermentation of recombinant R. eutropha strains producing P(HB-co-HHx).     

Enzymatic hydrolysis of bacterial poly(3-hydroxybutyrate-co-3-hydroxypropionate)s by poly(3-hydroxyalkanoate) depolymerase from Acidovorax Sp. TP4

Enzymatic degradability has been investigated for a series of bacterial poly(3-hydroxybutyrate-co-3-hydroxypropionate)s (P(3HB-co-3HP)s) with 3-hydroxypropionate (3HP) unit contents from 11 to 86 mol % as well as poly(3-hydroxybutyrate) (P(3HB)) and chemosynthesized poly(3-hydroxypropionate) (P(3HP)). The behavior of degradation by two types of extracellular poly(3-hydroxyalkanoate) (PHA) depolymerases purified from Ralstonia pikettii T1 and Acidovorax Sp. TP4, defined respectively as PHA depolymerase types I and II according to the position of the lipase box in the catalytic domain, were compared in relation to the thermal properties and crystalline structures of the PHA samples elucidated by differential scanning calorimetry and wide-angle X-ray diffraction. The degradation products were characterized by high-performance liquid chromatography and one- (1D) and two-dimension (2D) (1)H NMR spectroscopy. It was found that the PHA depolymerase of Acidovorax Sp. TP4 showed degradation behavior different from that shown by depolymerase of R. pikettii T1. PHA depolymerase from Acidovorax Sp. TP4 degraded the P(3HB-co-3HP) films with lower crystallinity in higher rates than those with higher crystallinity, no matter what kinds of crystalline structures they formed. In contrast, PHA depolymerase from R. pikettii T1 degraded P(3HB-co-3HP) films forming P(3HB) crystalline structure in higher rates than those forming P(3HP)s. The increase in amorphous nature of the P(3HB-co-3HP) films with P(3HB)-homopolymer-like crystalline structure increases and then decreases the rate of degradation by depolymerase from R. pikettii T1. The 3-hydroxybutyrate (3HB) monomer was produced as a major product by the hydrolysis of P(3HB) film by PHA depolymerase from Acidovorax Sp. TP4. The P(3HB-co-3HP) films could be degraded into 3HB and 3-hydroxypropionate (3HP) monomer at last, indicating that the catalytic domain of the enzyme recognized at least two monomeric units as substrates. While the PHA depolymerase from R. pikettii T1 hydrolyzed P(3HB) film into 3HB dimer as a major product, and the catalytic domain recognized at least three monomeric units. The degradation behavior of P(3HB-co-3HP) films by the PHA depolymerase of Acidovorax Sp. TP4 could be distinguished from that by the depolymerase of R. pikettii T1.     

Engineering of Ralstonia eutropha for production of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) from fructose and solid-state properties of the copolymer

Recombinant Ralstonia eutropha capable of producing poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) copolymer [P(3HB-co-3HHx)] from fructose was engineered by introduction of genes for crotonyl-CoA reductase (CCR) from Streptomyces cinnamonensis (ccrSc) and for PHA synthase and (R)-specific enoyl-CoA hydratase from Aeromonas caviae (phaC-JAc). In this recombinant strain, C6-acyl-CoA intermediates were provided via beta-ketothiolase-mediated elongation of butyryl-CoA, which was generated from crotonyl-CoA by the function of CCR. The recombinant strain could accumulate the copolyester up to 48 wt % of dry cell weight with 1.5 mol % of 3HHx fraction from fructose, when the expression of ccrSc under the control of the PBAD promoter was induced with 0.01% L-arabinose. The absence of L-arabinose or the deletion of ccrSc from the plasmid resulted in accumulation of poly(3-hydroxybutyrate) homopolymer, indicating the critical role of CCR in the formation of the 3-hydroxyhexanoate unit. Higher CCR activity obtained by the addition of a larger amount of L-arabinose did not affect the composition but reduced the intracellular content of the copolyester. The P(3HB-co-1.5 mol % 3HHx) copolyester produced from fructose by the recombinant R. eutropha showed relatively lower melting temperatures (150 degrees C and 161 degrees C) and lower crystallinity (48 +/- 5%) compared to those (175 degrees C and 60 +/- 5%) of P(3HB) homopolymer. It has been found that the incorporation of a small amount (1.5 mol %) of 3HHx units into P(3HB) sequences leads to a remarkable change in the solid-state properties of P(3HB) crystals. The present study demonstrates the potential of the engineered pathway for the production of copolyesters having favorable characteristics from inexpensive carbon resources.     

聚乙二醇对羟基丁酸和羟基己酸共聚物的共混改性研究

本研究以聚羟基脂肪酸酯家族中的新成员羟基丁酸和羟基己酸共聚物（PHBHHx）为基础,采用与聚乙二醇（PEG）共混的方法对其进行改性,研究结果证实：PHBHHx与PEG 共混物中比例为3:1及2:1时,两者完全物理相容。而PEG在共混物中比例升高时则导致相分离,成为部分相容体系。PEG掺入显著提高材料亲水性及表面自由能,使血管平滑肌细胞（RaSMCs）及血管内皮细胞（HUVECs）的细胞粘附及增殖大幅度提高,并且均具有一定的PEG含量依赖性。其中对RaSMCs的作用最为明显,RaSMCs能在PEG/PHBHHx比例为1:1的共混膜（E1X1）上持续增殖至融合,而HUVECs则呈粘附较差的类球形形貌,证实E1X1可以潜在应用于复合血管组织工程支架中的近内膜基材。     

Enhanced production of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) via manipulating the fatty acid beta-oxidation pathway in E. coli

Acyl-CoA dehydrogenase gene (yafH) of Escherichia coli was expressed together with polyhydroxyalkanoate synthase gene (phaC(Ac)) and (R)-enoyl-CoA hydratase gene (phaJ(Ac)) from Aeromonas caviae. The expression plasmids were introduced into E. coli JM109, DH5 alpha and XL1-blue, respectively. Compared with the strains harboring only phaC(Ac) and phaJ(Ac), all recombinant E. coli strains harboring yafH, phaC(Ac) and phaJ(Ac) accumulated at least four times more poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx). Cell dry weights produced by all recombinants containing yafH were also considerably higher than that without yafH. The addition of acrylic acid which serves as inhibitor for beta-oxidation and may lead to more precursor supply for PHA synthesis did not result in improved PHBHHx production compared with that of the overexpression of yafH. It appeared that the overexpression of acyl-CoA dehydrogenase gene (yafH) enhanced the supply of enoyl-CoA which is the substrate of (R)-enoyl-CoA hydratase. With the enhanced precursor supply, the recombinants accumulated more PHBHHx.     

Economic considerations in the production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by bacterial fermentation

The process for the production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB/V)] by bacterial fermentation and its recovery was analysed. The effects of various factors such as P(3HB/V) content, P(3HB/V) productivity, P(3HB/V) yield and 3-hydroxyvalerate (3HV) fraction in P(3HB/V) on the production cost of P(3HB/V) were examined. The increase in the 3HV yield on a carbon source did not significantly decrease the production cost when the 3HV fraction was 10 mol%, because the cost of the carbon substrate for 3HV was relatively small in terms of the total cost. However, at a 3HV fraction of 30 mol%, the 3HV yield on a carbon source had a significant effect on the total P(3HB/V) production cost. The production cost of P(3HB/V) increased linearly with the increase in the 3HV fraction in P(3HB/V). Received: 8 September 1999 / Received revision: 2 December 1999 / Accepted: 3 December 1999     

Production and characterization of terpolyester poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-3-hydroxyhexanoate) by recombinant Aeromonas hydrophila 4AK4 harboring genes phaAB

Recombinant Aeromonas hydrophila 4AK4 harboring phbA and phbB (phaAB) genes encoding β-ketothiolase and acetoacetyl-CoA reductase of Ralstonia eutropha produced a terpolyester of 3-hydroxybutyrate (3HB), 3-hydroxyvalerate (3HV), and 3-hydroxyhexanoate (3HHx) [P(3HB-co-3HV-co-3HHx)] from mixtures of dodecanoic acid and propionic acid. Depending on the concentration of propionic acid in bacterial cultures, cell growth represented by cellular dry weight (CDW), P(3HB-co-3HV-co-3HHx) contents in dry cells and 3HV molar percentage in the terpolyester ranged from 0.43 g l⁻¹ to 3.29 g l⁻¹, 20.7% to 35.6%, 2.3 mol% to 7.1 mol%, respectively. Number average molecular (M_n) weights of the terpolyesters were 303,000–800,000, independent from monomer fraction content. This terpolyester was characterized by nuclear magnetic resonance (NMR), gel-permeation chromatography (GPC), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and stress–strain measurement studies. Results showed that the terpolyester had higher thermal stability and elongation at break compared with that of homopolymer poly(3-hydroxybutyrate) (PHB) and its copolymers P(3HB-co-5 mol%3HV) or P(3HB-co-12 mol%3HHx). In addition, the terpolyester had lower melting (T_m) temperatures and enthalpy of fusions (ΔH_m) than PHB did.     

Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) supports adhesion and migration of mesenchymal stem cells and tenocytes

AIM: To establish the potential of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) as a material for tendon repair. METHODS: The biocompatibility of PHBHHx with both rat tenocytes (rT) and human mesenchymal stem cells (hMSC) was explored by monitoring adhesive characteristics on films of varying weight/volume ratios coupled to a culture atmosphere of either 21% O2 (air) or 2% O2 (physiological normoxia). The diameter and stiffness of PHBHHx films was established using optical coherence tomography and mechanical testing, respectively. RESULTS: Film thickness correlated directly with weight/volume PHBHHx (r2 = 0.9473) ranging from 0.1 mm (0.8% weight/volume) to 0.19 mm (2.4% weight/volume). Film stiffness on the other hand displayed a biphasic response which increased rapidly at values 1.6% weight/volume. Optimal cell attachment of rT required films of ≥ 1.6% and ≥ 2.0% weight/volume PHBHHx in 2% O2 and 21% O2 respectively. A qualitative adhesion increase was noted for hMSC in films ≥ 1.2% weight/volume, becoming significant at 2% weight/volume in 2% O2. An increase in cell adhesion was also noted with ≥ 2% weight/volume PHBHHx in 21% O2. Cell migration into films was not observed. CONCLUSION: This evaluation demonstrates that PHBHHx is a suitable polymer for future cell/polymer replacement strategies in tendon repair.     

Biosynthesis and native granule characteristics of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in Delftia acidovorans

The ability of Delftia acidovorans to incorporate a broad range of 3-hydroxyvalerate (3HV) monomers into polyhydroxyalkanoate (PHA) copolymers was evaluated in this study. Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] containing 0–90 mol% of 3HV was obtained when a mixture of sodium 3-hydroxybutyrate and sodium valerate was used as the carbon sources. Transmission electron microscopy analysis revealed an interesting aspect of the P(3HB-co-3HV) granules containing high molar ratios of 3HV whereby, the copolymer granules were generally larger than those of poly(3-hydroxybutyrate) [P(3HB)] granules, despite having almost the same cellular PHA contents. The large number of P(3HB-co-3HV) granules occupying almost the entire cell volume did not correspond to a higher amount of polymer by weight. This indicated that the granules of P(3HB-co-3HV) contain polymer chains that are loosely packed and therefore have lower density than P(3HB) granules. It was also interesting to note that a decrease in the length of the side chain from 3HV to 4-hydroxybutyrate (4HB) corresponded to an increase in the density of the respective PHA granules. The presence of longer side chain monomers (3HV) in the PHA structure seem to exhibit steric effects that prevent the polymer chains in the granules from being closely packed. The results reported here have important implications on the maximum ability of bacterial cells to accumulate PHA containing monomers with longer side chain length.