Enhancement of Copper Dissolution from a Sulfide Ore by Using Thiobacillus thiooxidans

Copper dissolution from a sulfide ore (with covellite as the main copper phase) was investigated in cultures of Thiobacillus ferrooxidans or Thiobacillus thiooxidans and in abiotic controls. In unsupplemented media, T. ferrooxidans was more efficient than T. thiooxidans. In the presence of ferric iron, the dissolution of covellite was not significantly different in cultures inoculated with T. ferrooxidans or T. thiooxidans. However, the most extraction was found in T. thiooxidans cultures supplemented with ferrous sulfate. The first results were explained by the mechanism proposed by Schippers and Sand (Appl Envir Microbiol 65:319-321, 1999), which involves polysulfides and sulfur as intermediates. This mechanism was extended to explain the behavior of T. thiooxidans culture supplemented with ferrous iron.     

Enhancement of Dissolution Rate of Gliclazide Using Solid Dispersions with Polyethylene Glycol 6000

The aim of the present study was to enhance the dissolution rate of gliclazide using its solid dispersions (SDs) with polyethylene glycol (PEG) 6000. The phase solubility behavior of gliclazide in presence of various concentrations of PEG 6000 in 0.1 N HCl was obtained at 37 °C. The solubility of gliclazide increased with increasing amount of PEG 6000 in water. Gibbs free energy () values were all negative, indicating the spontaneous nature of gliclazide solubilization and they decreased with increase in the PEG 6000 concentration, demonstrating that the reaction conditions became more favorable as the concentration of PEG 6000 increased. The SDs of gliclazide with PEG 6000 were prepared at 1:1, 1:2 and 1:5 (gliclazide/PEG 6000) ratio by melting-solvent method and solvent evaporation method. Evaluation of the properties of the SDs was performed by using dissolution, Fourier-transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC) and X-ray diffraction (XRD) studies. The SDs of gliclazide with PEG 6000 exhibited enhanced dissolution rate of gliclazide, and the rate increased with increasing concentration of PEG 6000 in SDs. Mean dissolution time (MDT)of gliclazide decreased significantly after preparation of SDs and physical mixture with PEG 6000. The FTIR spectroscopic studies showed the stability of gliclazide and absence of well-defined gliclazide–PEG 6000 interaction. The DSC and XRD studies indicated the microcrystalline or amorphous state of gliclazide in SDs of gliclazide with PEG 6000.     

Co-Amorphous Combination of Nateglinide-Metformin Hydrochloride for Dissolution Enhancement

The aim of the present work was to prepare a co-amorphous mixture (COAM) of Nateglinide and Metformin hydrochloride to enhance the dissolution rate of poorly soluble Nateglinide. Nateglinide (120 mg) and Metformin hydrochloride (500 mg) COAM, as a dose ratio, were prepared by ball-milling technique. COAMs were characterized for saturation solubility, amorphism and physicochemical interactions (X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR)), SEM, in vitro dissolution, and stability studies. Solubility studies revealed a sevenfold rise in solubility of Nateglinide from 0.061 to 0.423 mg/ml in dose ratio of COAM. Solid-state characterization of COAM suggested amorphization of Nateglinide after 6 h of ball milling. XRPD and DSC studies confirmed amorphism in Nateglinide, whereas FTIR elucidated hydrogen interactions (proton exchange between Nateglinide and Metformin hydrochloride). Interestingly, due to low energy of fusion, Nateglinide was completely amorphized and stabilized by Metformin hydrochloride. Consequently, in vitro drug release showed significant increase in dissolution of Nateglinide in COAM, irrespective of dissolution medium. However, little change was observed in the solubility and dissolution profile of Metformin hydrochloride, revealing small change in its crystallinity. Stability data indicated no traces of devitrification in XRPD of stability sample of COAM, and % drug release remained unaffected at accelerated storage conditions. Amorphism of Nateglinide, proton exchange with Metformin hydrochloride, and stabilization of its amorphous form have been noted in ball-milled COAM of Nateglinide-Metformin hydrochloride, revealing enhanced dissolution of Nateglinide. Thus, COAM of Nateglinide-Metformin hydrochloride system is a promising approach for combination therapy in diabetic patients.     

Enhancement of Dissolution and Skin Permeability of Pentazocine by Proniosomes and Niosomal Gel

Proniosomes (PN) are the dry water-soluble carrier systems that may enhance the oral bioavailability, stability, and topical permeability of therapeutic agents. The low solubility and low oral bioavailability due to extensive first pass metabolism make Pentazocine as an ideal candidate for oral and topical sustained release delivery. The present study was aimed to formulate the PNs by quick slurry method that are converted to niosomes (liquid dispersion) by hydration, and subsequently formulated to semisolid niosomal gel. The PNs were found in spherical shape in the SEM and stable in the physicochemical and thermal analysis (FTIR, TGA, and XRD). The quick slurry method produced high recovery (>?80% yield) and better flow properties (θ?=?28.1–37.4°). After hydration, the niosomes exhibited desirable entrapment efficiency (44.45–76.23%), size (4.98–21.3 μm), and zeta potential (??9.81 to ??21.53 mV). The in vitro drug release (T_100%) was extended to more than three half-lives (2–4 h) and showed good fit to Fickian diffusion indicated by Korsmeyer-Peppas model (n?=?0.136–0.365 and R²?=?0.9747–0.9954). The permeation of niosomal gel was significantly enhanced across rabbit skin compared to the pure drug-derived gel. Therefore, the PNs are found promising candidates for oral as dissolution enhancement and sustained release for oral and topical delivery of pentazocine for the management of cancer pain.     

Preparation and Characterization of Co-Grinded Mixtures of Aceclofenac and Neusilin US2 for Dissolution Enhancement of Aceclofenac

The present study was carried out with a view to enhance the dissolution of poorly water-soluble BCS-class II drug aceclofenac by co-grinding with novel porous carrier Neusilin US_2. (amorphous microporous granules of magnesium aluminosilicate, Fuji Chemical Industry, Toyama, Japan). Neusilin US₂ has been used as an important pharmaceutical excipient for solubility enhancement. Co-grinding of aceclofenac with Neusilin US₂ in a ratio of 1:5 was carried out by ball milling for 20 h. Samples of co-ground mixtures were withdrawn at the end of every 5 h. and characterized for X-ray powder diffraction, differential scanning calorimetry, and Fourier-transform infrared spectroscopy. The analysis revealed the conversion of crystalline aceclofenac to its amorphous form upon milling with Neusilin US₂. Further, in vitro dissolution rate of aceclofenac from co-ground mixture was significantly higher compared to pure aceclofenac. The accelerated stability study of co-ground mixture was carried out at 40°C/75%RH for 4 weeks, and it showed that there was no reversion from amorphous to crystalline form. Thus, it is advantageous to use a porous carrier like Neusilin US₂ in improvement of dissolution of poorly soluble drugs.     

Enhancement of Pentachlorophenol Biodegradation Using Organic and Inorganic Supports

The role of soil, straw, and sawdust as supports in enhancing pentachlorophenol (PCP) mineralization by an indigenous soil consortium was examined by assessing the bioavailability of the substrate and other nutrients. PCP sorption tests were conducted in the presence of sterile supports to evaluate PCP bioavailability. Indigenous biomass, practically free of soil particles, was prepared to test the influence of sterile soil and soil components on the mineralization of increasing PCP concentrations. Organic supports such as straw and sawdust were very good sorbents for PCP, resulting in a slow, continuous desorption of substrate, high mineralization rates, and reduced toxicity to the active biomass. Soil and clay retained less PCP and desorbed it in decreasing amounts. Soil was the best amendment to enhance the mineralization of 100 mg/L PCP. Soil, soil extract, and the lowest-molecular-weight fraction of the soil extract facilitated the complete mineralization of 300 mg/L of PCP with a lag time of about 9 days, compared to 21 days for the unamended culture. Addition of soil enhanced PCP mineralization by an indigenous consortium, probably because soil particles served as an adsorbent for the contaminant to decrease its toxicity, as a support for biomass colonization, and as a source of supplementary nutrients for the biomass. This concept is of importance, particularly for the production of active and resistant biomass for the biotreatment of contaminated soils.     

Studies on Formulation Development of Mucoadhesive Sustained Release Itraconazole Tablet Using Response Surface Methodology

The purpose of this research was to prepare and evaluate sustained release mucoadhesive tablets of Itraconazole. It is practically insoluble in aqueous fluids hence its solid dispersion with Eudragit E100 was prepared by spray drying. This was formulated in matrix of hydrophilic mucoadhesive polymers Carbopol 934P (CP) and Methocel K4M (HPMC). The formulation was optimized using a 3² factorial design. Amounts of CP and HPMC were taken as formulation variables for optimizing response variables i.e. mucoadhesion and dissolution parameters. The optimized mucoadhesive formulation was orally administered to albino rabbits, and blood samples collected were used to determine pharmacokinetic parameters. The solid dispersion markedly enhanced the dissolution rate of itraconazole. The bioadhesive strength of formulation was found to vary linearly with increasing amount of both polymers. Formulations exhibited drug release fitting Peppas model with value of n ranging from 0.61 to 1.18. Optimum combination of polymers was arrived at which provided adequate bioadhesive strength and fairly regulated release profile. The experimental and predicted results for optimum formulations were found to be in close agreement. The formulation showed C _max 1898 ± 75.23 ng/ml, t _max of the formulation was 2 h and AUC was observed to be 28604.9 ng h/ml     

Conformation of Peracetylated Cyclodextrins

Typical brassinosteroid activity was found in the alkaline hydrolysate of the n-hexane fraction of lily pollen. Two acyl conjugates of teasterone were purified from the n-hexane fraction by HPLC and analyzed by GC-MS and/or LC-MS, resulting in the identification of teasterone esters with lauric acid and myristic acid. Syntheses of the teasterone esters are also reported. The acyl conjugates of typhasterol, castasterone, and brassinolide did not occur in lily pollen. This is the first time that acyl conjugates have ever been discovered among naturally occurring brassinosteroids.     

Thin-layer Chromatography of Cyclodextrins

N-methyl-2-pyrrolidone (NMP) is known for its multi-solvent properties. However, its biological, especially immunological significance still remains to be elucidated. In this study, we show for the first time that NMP stimulates the skin immune system by activating epidermal Langerhans cells (LCs). In contrast with the placebo tape, when the NMP-containing adhesive tape was applied on murine skin, LCs were stimulated immediately. Activated LCs not only exhibited enhanced expression of major histocompatibility complex class II and morphological changes, including the loss of dendrites, but also migrated effectively to draining lymph nodes. In addition, application of the tyrosine-related protein-2 peptide, which is the cytotoxic T lymphocyte (CTL) epitope against B16 melanoma, in combination with the NMP tape, resulted in explosive expansion of specific CTLs in mouse spleens. Taken together, these results demonstrate a novel role of NMP as an adjuvant in percutaneous peptide immunization.     

Itraconazole treatment of murine aspergillosis

ICR mice were challenged with conidia of Aspergillus fumigatus given either intranasally or intravenously, and treated beginning 1 day later with itraconazole, amphotericin B, or the vehicles for these two agents. Mice challenged intravenously and treated with either antifungal drug had prolonged survival over controls, and had lower tissue counts in the kidneys than the controls. However, mice challenged intranasally had neither prolonged survival nor lower lung tissue counts than the controls.     

Near-Infrared Fluorescence Enhancement Using Silver Island Films

Near-infrared (near-IR) excitation produces little background signal from biological molecules, making near-IR fluorescence technology highly useful in proteomic and genomic applications. To increase the emissions of near-IR fluorophores, we examined the use of metal-enhanced fluorescence on these longer wavelength dyes. IRDye^®700- and IRDye^®800-labeled DNA oligonucleotides and proteins were spotted onto silver island film (SIF)-coated glass slides, and analyzed using a LI-COR Odyssey^® IR imaging system. We observed more than 18-fold enhancement of the IRDye^®700 and 15-fold enhancement of the IRDye^®800-labeled DNA oligonucleotides when spotted on SIF-coated surfaces compared with uncoated surfaces. We also demonstrated that the enhanced emissions produced on the SIF-coated slides remained linear over several orders of magnitude, that the emissions remained reproducible across a slide surface, and that the SIF-coated slide remained effective at enhancing emissions after 9 months of storage. Our results indicate that SIF-coated glass slides are effective at enhancing near-IR fluorescence and could be developed into an effective tool to aid in molecular biological applications.     

Enhancement of Anaerobic Digestion Using Particulate Growth Systems

Attached media reactors are used for enhancement of wastewater treatment processes including anaerobic condition. Selection of a suitable biofilm carrier is a compelling method to improve anaerobic digestion systems. This study investigates the performance of four fibrous biofilms installed in batch biogas reactors for treatment of cow manure. BioCords HS1, HS2, LS1, and LS2 are manufactured by Bishop Water Technologies, ON, Canada. Effluents and attached growth media were analyzed after batch experiment; methane production, methane yield, transfer efficiencies, organic and solid removal efficiencies, pH, and attached volatile suspended solid (VSS) were measured; VSS attached to biofilms mainly correlated with the specific surface area of each biofilm. Additionally, SEM (scanning electron microscopy) was used for further understanding of biofilm formation process for BioCords and the dissimilarity in their performance. The results indicated that BioCord LS2 had positive impact on achieving higher methane production and removal efficiencies compared to other support media utilized in batch reactors. It was also demonstrated from the experiment that BioCord LS2 potentially could generate higher methane production than conventional batch bioreactor.     

Broadband Enhancement of Faraday Effect Using Magnetoplasmonic Metasurfaces

Plasmonics - Magnetooptical Faraday effect enables ultrafast photonic devices based on nonreciprocal polarization rotation; however, the intrinsic weakness of Faraday effect prevents...     

Soluble Itraconazole in Tablet Form Using Disordered Drug Delivery Approach: Critical Scale-up Considerations and Bio-equivalence Studies

The present research work explores formulation design, critical scale-up considerations and bio-equivalence studies of soluble itraconazole (ITZ) in a tablet form using disordered drug delivery approach. Disordered system of ITZ with a lower viscosity grade of hydroxypropyl methyl cellulose (Pharmacoat 603) was developed for the first time and extensively characterised at three different stages, namely development of glass system, pellet coating and tablet compression using advanced analytical techniques. Complete molecular embedment of ITZ resulting in amorphisation was observed and found to be sustained until end of the real-time and accelerated stability studies. Developed formulation exhibited comparative in vitro dissolution profile (similarity factor >70) with reference product (Sporanox, Janssen Pharmaceutica) in simulated gastric fluid without enzymes. Formulation was scaled up in three batches (50,000 tablets/batch) with detailed validation of critical process parameters using process capability index method. Critical scale-up considerations like control of residual solvent content, effect of pellet size on dissolution, process variables in pellet coating, compressibility of coated pellets and cushioning effect required for desired compressibility were thoroughly discussed. Bioequivalence study of single dose of test and reference product in seven healthy human volunteers under fed condition exhibited significant bioequivalence with results (AUC_last and AUC_∞) lying between 90% confidence interval. With increase in number of subjects to 24, a significant effect on pharmacokinetic parameters of both reference as well as developed ITZ tablets was observed.     

Formulation and Stability Testing of Itraconazole Crystalline Nanoparticles

Itraconazole (ITZ) crystalline nanoparticles were prepared using relatively simple, low-cost sonoprecipitation technique, in which both the solvent and antisolvent were organic in nature. The effect of stabilizer type (hydroxypropyl methylcellulose, hydroxypropyl cellulose, Inutec SP1®, and pluronic F127), drying method (oven and freeze drying) and matrix former used (Avicel PH101, and Aerosil®200) on the dissolution performance as a key characteristic of nanocrystals was evaluated. In 10 min, all of the prepared nanocrystals showed 3.77−8.59 times improvement in percent drug dissolved compared to pure ITZ. Concerning the effect of stabilizer type, the following rank order can be given: pluronic F127 ≥ hydroxypropyl cellulose ≥ hydroxypropyl methylcellulose (HPMC) > inutec SP1. Freeze-dried ITZ nanocrystals containing Avicel PH 101 showed better dissolution rate compared to other nanocrystals. The chemical structure of itraconazole nanocrystals was not changed as revealed by Fourier transform infrared. Stability study of selected nanocrystals (F5, F7, and F8) revealed physical and chemical stability of F7 and F8, while a decrease in dissolution rate of F5 was observed (although being chemically stable) when stored under high relative humidity conditions. Although inutec is less potent than pluronic F127 and HPMC regarding their effect on dissolution rate enhancement, it is equipotent to pluronic F127 in preserving the rapid drug dissolution.Key words: itraconazole, nanocrystals, nanoparticles, stability study     

Protein Thermal Stability Enhancement by Designing Salt Bridges: A Combined Computational and Experimental Study

Protein thermal stability is an important factor considered in medical and industrial applications. Many structural characteristics related to protein thermal stability have been elucidated, and increasing salt bridges is considered as one of the most efficient strategies to increase protein thermal stability. However, the accurate simulation of salt bridges remains difficult. In this study, a novel method for salt-bridge design was proposed based on the statistical analysis of 10,556 surface salt bridges on 6,493 X-ray protein structures. These salt bridges were first categorized based on pairing residues, secondary structure locations, and Cα–Cα distances. Pairing preferences generalized from statistical analysis were used to construct a salt-bridge pair index and utilized in a weighted electrostatic attraction model to find the effective pairings for designing salt bridges. The model was also coupled with B-factor, weighted contact number, relative solvent accessibility, and conservation prescreening to determine the residues appropriate for the thermal adaptive design of salt bridges. According to our method, eight putative salt-bridges were designed on a mesophilic β-glucosidase and 24 variants were constructed to verify the predictions. Six putative salt-bridges leaded to the increase of the enzyme thermal stability. A significant increase in melting temperature of 8.8, 4.8, 3.7, 1.3, 1.2, and 0.7°C of the putative salt-bridges N437K–D49, E96R–D28, E96K–D28, S440K–E70, T231K–D388, and Q277E–D282 was detected, respectively. Reversing the polarity of T231K–D388 to T231D–D388K resulted in a further increase in melting temperatures by 3.6°C, which may be caused by the transformation of an intra-subunit electrostatic interaction into an inter-subunit one depending on the local environment. The combination of the thermostable variants (N437K, E96R, T231D and D388K) generated a melting temperature increase of 15.7°C. Thus, this study demonstrated a novel method for the thermal adaptive design of salt bridges through inference of suitable positions and substitutions.     

Using Tidal Salt Marsh Mesocosms to Aid Wetland Restoration

Tidal wetland mesocosms at Tijuana River National Estuarine Research Reserve failed to elucidate effects of hydrologic treatments (excluded, impounded, and fully tidal systems) for most parameters measuring Salicornia virginica (pickleweed). Although soil salinity increased where tidal flushing was excluded for 10 months (salinities rose ～20 to 50%), pickleweed cover and algal chlorophyll did not differ among treatments. Effects were seen only in pickleweed growth rates (～30% decrease where tides were excluded) and normalized difference vegetation index (NDVI) measurements. We failed to show any differences between impounded and fully tidal conditions, because the mesocosms had coarse sediments, and impounded water drained easily via subsurface flow. However, the problems that we encountered with the mesocosms led to the following advice for future wetland restoration projects: (1) Mesocosms are useful for testing restoration techniques before an actual restoration project takes place. (2) Mesocosms should be used to test factors that may lead to more successful restoration in the future, including planting techniques, substrate conditions, and hydrology. (3) Mesocosms should be used to develop new assessment methods for monitoring wetland ecosystems. Because of the ability to control some environmental parameters while maintaining seminatural conditions, mesocosms offer great potential for the future evaluation of experimental restoration techniques.     

Enhancement of Bioavailability of Cefpodoxime Proxetil Using Different Polymeric Microparticles

Poorly water-soluble drugs such as cefpodoxime proxetil (400 μg/ml) offer a challenging problem in drug formulation as poor solubility is generally associated with poor dissolution characteristics and thus poor oral bioavailability. According to these characteristics, preparation of cefpodoxime proxetil microparticle has been achieved using high-speed homogenization. Polymers (methylcellulose, sodium alginate, and chitosan) were precipitated on the surface of cefpodoxime proxetil using sodium citrate and calcium chloride as salting-out agents. The pure drug and the prepared microparticles with different concentrations of polymer (0.05–1.0%) were characterized in terms of solubility, drug content, particle size, thermal behavior (differential scanning calorimeter), surface morphology (scanning electron microscopy), in vitro drug release, and stability studies. The in vivo performance was assessed by pharmacokinetic study. The dissolution studies demonstrate a marked increase in the dissolution rate in comparison with pure drug. The considerable improvement in the dissolution rate of cefpodoxime proxetil from optimized microparticle was attributed to the wetting effect of polymers, altered surface morphology, and micronization of drug particles. The optimized microparticles exhibited excellent stability on storage at accelerated condition. The in vivo studies revealed that the optimized formulations provided improved pharmacokinetic parameter in rats as compared with pure drug. The particle size of drug was drastically reduced during formulation process of microparticles.     

Enhancement of Galantamine HBr Skin Permeation Using Sonophoresis and Limonene-Containing PEGylated Liposomes

This study aimed to investigate the effect of low-frequency sonophoresis (SN) and limonene-containing PEGylated liposomes (PL) on the transdermal delivery of galantamine HBr (GLT). To evaluate the skin penetration mechanism, confocal laser scanning microscopy (CLSM), Fourier transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC) were employed. The application of SN led to more GLT penetration into and through the skin than GLT solution alone. The liposomes also improved GLT permeation, and 2% limonene-containing PL (PL-LI2%) exhibited the highest GLT permeation, followed by PL-LI1%, PL-LI0.1%, and PL. The CLSM images of PL-LI2% resulted in the highest fluorescence intensity of fluorescent hydrophilic molecules in the deep skin layer, and the rhodamine PE-labeled liposome membrane was distributed in the intercellular region of the stratum corneum (SC). PL-LI2% induced significant changes in intercellular lipids in the SC, whereas SN had no effect on intercellular lipids of the SC. DSC thermograms showed that the greatest decrease in the lipid transition temperature occurred in PL-LI2%-treated SC. SN might improve drug permeation through an intracellular pathway, while limonene-containing liposomes play an important role in delivering GLT through an intercellular pathway by increasing the fluidity of intercellular lipids in the SC. Moreover, a small vesicle size and high membrane fluidity might enhance the transportation of intact vesicles through the skin.     

Effects of Itraconazole and Micafungin on Aspergillus fumigatus Biofilms

Aspergillus fumigatus (A. fumigatus) is the most common airborne opportunistic fungal pathogen. Biofilm formation is one of the main pathogenic mechanisms of A. fumigatus. During the past decades, A. fumigatus azole resistance has become prevalent due to the medical and agricultural use of antifungal drugs and fungicides. Until now, the role of fungal biofilms in azole resistance of A. fumigatus remains unclear. In the present study, we compared biofilm drug susceptibility and biofilm formation under itraconazole of azole-resistant strains, sensitive strains, and standard strains, separately. The biofilm viability and matrix thickness at the early and the late stage were measured by XTT assay and Calcofluor white. Our results showed that the sessile minimum inhibitory concentration of itraconazole, which describing the inhibition of drugs on fungi sessile with biofilm, was much higher than the traditional minimal inhibitory concentration of itraconazole. Additionally, low concentrations of itraconazole inhibited biofilm formation of A. fumigatus strains. Notably, biofilm formation by azole-resistant strains could not be inhibited by high concentrations of itraconazole but could be effectively restrained by low concentrations of micafungin, revealing the efficacy of a cell-wall inhibitor to disrupt A. fumigatus biofilm formation. However, late-stage biofilms of both azole-resistant strains and standard strains were hard to disrupt using itraconazole. We found that itraconazole was effective to prevent A. fumigatus biofilm formation at the early stage. For the treatment of A. fumigatus biofilm, our findings suggest that an early-stage preventive strategy is preferred and micafungin is effective to control the azole-resistant strain infection.