Hydrolysis of xylans by a thermostable hybrid xylanase expressed in <Emphasis Type="Italic">Escherichia coli</Emphasis>

Escherichia coli-expressed a hybrid xylanase, Btx, encoded by a designed hybrid xylanase gene btx was purified. The molecular mass of the enzyme was estimated to be 22 kDa. The K _m and k _cat values for Btx were 1.9 mg/ml and 140 s⁻¹, respectively. It hydrolyzed xylan principally to xylobiose and xylotriose, and was functionally similar to family 11 xylanases. As some differences were found in the hydrolytic products between birchwood xylan and wheat bran insoluble xylan, the xylan binding domains in xylanase Btx must have different effects on soluble and insoluble xylan.     

Action of different types of endoxylanases on eucalyptus xylan in situ

Most studies of the mode of action of industrially important endoxylanases have been done on alkali extracted-plant xylan. In just few cases, the native form of the polysaccharide, acetylated xylan, was used as a substrate. In this work action of xylanases belonging to three glycoside hydrolase families, GH10, GH11, and GH30 was investigated on acetylglucuronoxylan directly in hardwood cell walls. Powdered eucalyptus wood was used as xylanase substrate. Enzyme-generated fragments were characterized by TLC, MALDI ToF MS, and NMR spectroscopy. All three xylanases generated from eucalyptus wood powder acetylated xylooligosaccharides. Those released by GH10 enzyme were the shortest, and those released by GH30 xylanase were of the largest diversity. For GH30 xylanase the 4-O-methyl-D-glucuronic acid (MeGlcA) side residues function as substrate specificity determinants regardless the acetylation of the neighboring hydroxyl group. Much simpler xylooligosaccharide patterns were observed when xylanases were applied in combination with carbohydrate esterase family 6 acetylxylan esterase. In the presence of the esterase, all aldouronic acids remained 3-O-acetylated on the xylopyranosyl (Xylp) residue substituted with MeGlcA. The 3-O-acetyl group, in contrast to the acetyl groups of otherwise unsubstituted Xylp residues, does not affect the mode of action of endoxylanases, but contributes to recalcitrance of the acidic xylan fragments. The results confirm importance of acetylxylan esterases in microbial degradation of acetylated hardwood glucuronoxylan. They also point to still unresolved question of efficient enzymatic removal of the 3-O-acetyl group on MeGlcA-substituted Xylp residues negatively affecting the saccharification yields.

     

Purification and characterization of two sugarcane bagasse-absorbable thermophilic xylanases from the mesophilic <Emphasis Type="Italic">Cellulomonas flavigena</Emphasis>

We report the purification and characterization of two thermophilic xylanases from the mesophilic bacteria Cellulomonas flavigena grown on sugarcane bagasse (SCB) as the only carbon source. Extracellular xylanase activity produced by C. flavigena was found both free in the culture supernatant and associated with residual SCB. To identify some of the molecules responsible for the xylanase activity in the substrate-bound fraction, residual SCB was treated with 3 M guanidine hydrochloride and then with 6 M urea. Further analysis of the eluted material led to the identification of two xylanases Xyl36 (36 kDa) and Xyl53 (53 kDa). The pI for Xyl36 was 5.0, while the pI for Xyl53 was 4.5. Xyl36 had a K _m value of 1.95 mg/ml, while Xyl53 had a K _m value of 0.78 mg/ml. In addition to SCB, Xyl36 and Xyl53 were also able to bind to insoluble oat spelt xylan and Avicel, as shown by substrate-binding assays. Xyl36 and Xyl53 showed optimal activity at pH 6.5, and at optimal temperature 65 and 55°C, respectively. Xyl36 and Xyl53 retained 24 and 35%, respectively, of their original activity after 8 h of incubation at their optimal temperature. As far as we know, this is the first study on the thermostability properties of purified xylanases from microorganisms belonging to the genus Cellulomonas.     

Differential expression of cellulases and xylanases by <Emphasis Type="Italic">Cellulomonas flavigena</Emphasis> grown on different carbon sources

The diversity of cellulases and xylanases secreted by Cellulomonas flavigena cultured on sugar cane bagasse, Solka-floc, xylan, or glucose was explored by two-dimensional gel electrophoresis. C. flavigena produced the largest variety of cellulases and xylanases on sugar cane bagasse. Multiple extracellular proteins were expressed with these growth substrates, and a limited set of them coincided in all substrates. Thirteen proteins with carboxymethyl cellulase or xylanase activity were liquid chromatography/mass spectrometry sequenced. Proteins SP4 and SP18 were identified as products of celA and celB genes, respectively, while SP20 and SP33 were isoforms of the bifunctional cellulase/xylanase Cxo recently sequenced and characterized in C. flavigena. The rest of the detected proteins were unknown enzymes with either carboxymethyl cellulase or xylanase activities. All proteins aligned with glycosyl hydrolases listed in National Center for Biotechnology Information database, mainly with cellulase and xylanase enzymes. One of these unknown enzymes, protein SP6, was cross-induced by sugar cane bagasse, Solka-floc, and xylan. The differences in the expression maps of the presently induced cultures revealed that C. flavigena produces and secretes multiple enzymes to use a wide range of lignocellulosic substrates as carbon sources. The expression of these proteins depends on the nature of the cellulosic substrate.     

Expression of the cloned xylanases from an alkalophilic,thermophilic Bacillus in Bacillus subtilis

A recombinant plasmid construct, pLPX6.5, harbouring a 6.5 kb Hind III fragment of genomic DNA, from an alkalophilic, thermophilic Bacillus NCIM 59 and coding for xylanase activity, was electroporatically transformed into Bacillus subtilis MI 111. The expression of the recombinant xylanases was confirmed by cross-reactivity with antibodies raised against purified xylanase II (M _r 15,800) from NCIM 59. However, as there were different xylan hydrolysis products from NCIM 59 and the host B. subtilis, the two xylanases appear to have different modes of action. Xylanase expression in the transformants was 6-fold higher than in the host. There was no significant enhancement in the expression of recombinant xylanases by adding xylan to the growth medium.The authors are with the Division of Biochemical Sciences, National Chemical Laboratory, Pune-411008, India     

Substrate hydrolysis by combinations of Trichoderma xylanases

The hydrolysis of five xylan substrates was examined using combinations of two pairs of xylanases from two species of Trichoderma. Antisynergy was observed in acetylated xylan isolated from aspen when the maximum hydrolysis achieved by certain xylanase combinations was significantly lower than that achieved by the most effective enzyme in the combination. Cooperative interactions among xylanases were observed in pine holocellulose where xylanase combinations were more effective than single xylanases.     

Cloning and Characterization of the Xyn11A Gene from <Emphasis Type="Italic">Lentinula edodes</Emphasis>

Hemicellulose represents a rich source of biomass that can be converted into useful chemical feedstocks. One of the main components of hemicellulose is xylan, a polymer of xylose residues. Xylanase enzymes that hydrolyze xylan are therefore of great commercial interest. We have cloned a gene (xyn11A) that encodes a 283-amino acid xylanase enzyme from the fungus Lentinula edodes. The enzyme has a pI of 4.6 and belongs to the highly conserved glycosyl hydrolase family 11. The xylanase gene was cloned into a Pichia pastoris expression vector that secretes active enzyme into both solid and liquid media. The optimal reaction conditions were at pH 4.5 and 50°C. The enzyme had a K_m of 1.5 mg/ml and a V_max of 2.1 mmol/min/mg. Xyn11A produced primarily xylobiose, xylotriose, and xylotetraose from a birchwood xylan substrate. This is the first report on the cloning of a hemicellulase gene from L. edodes.     

The role of two Trichoderma reesei xylanases in the bleaching of pine kraft pulp

Summary The two major xylanases of Trichoderma reesei with different pI values and pH optima were compared for increasing the bleachability of pine kraft pulp. The efficiencies of the two enzymes acting on pulp substrate were very similar in hydrolysis yield, extraction kappa number or final brightness value. Only slight synergism between the two enzymes was observed in both hydrolysis and bleaching tests. The pH optimum of the pI 5.5 xylanase was similar in pulp treatment and in the hydrolysis of isolated substrates, and the bleaching result also correlated well with the hydrolysis of pulp xylan. By contrast, the pI 9.0 xylanase acted differently on pulp than on isolated xylans at different pH values and the pH optimum on pulp was increased. The bleachability of pulp by the pI 9.0 xylanase was improved more than expected at pH 7.0, although the hydrolysis of pulp xylan was substantially decreased. A similar phenomenon was also observed when the hydrolysis was performed in water instead of buffer. It thus appears that the degree of hydrolysis needed to obtain improved bleachability with pI 9.0 xylanase can be minimized by proper adjustment of the hydrolysis conditions. Correspondence to: J. Buchert     

The identification,purification, and characterization of STXF10 expressed in <Emphasis Type="Italic">Streptomyces thermonitrificans</Emphasis> NTU-88

Multiple xylanolytic enzymes of Streptomyces thermonitrificans NTU-88 were induced by oat-spelt xylan and separated by two-dimensional polyacrylamide and zymogram gels. Nineteen clear spots differed in pI and molecular weight values were found on the zymogram, and only spot one was seen on the corresponding silver-stained gel. These results revealed that multiple xylanases were secreted when S. thermonitrificans NTU-88 was induced and the spot (STXF10), identified as being a glycosyl hydrolase family 10 xylanase, was the predominant one among xylanases. STXF10 showed a tolerance for high temperatures and broad pH ranges and high affinity and hydrolysis efficiency for xylans. Furthermore, it also featured the minor ability to degrade different lignocellulosic substrates. Although S. thermonitrificans NTU-88 possesses multiple xylanases, our results suggest that the major form of xylanase might be selectively and specifically induced depending on the type of substrate to which the microorganism is exposed.     

An alkaline active xylanase: Insights into mechanisms of high pH catalytic adaptation

The alkaliphilic bacterium, Bacillus halodurans S7, produces an alkaline active xylanase (EC 3.2.1.8), which differs from many other xylanases in being operationally stable under alkaline conditions as well as at elevated temperature. Compared to non-alkaline active xylanases, this enzyme has a high percent composition of acidic amino acids which results in high ratio of negatively to positively charged residues. A positive correlation was observed between the charge ratio and the pH optima of xylanases. The recombinant xylanase was crystallized using a hanging drop diffusion method. The crystals belong to the space group P2₁2₁2₁ and the structure was determined at a resolution of 2.1 Å. The enzyme has the common eight-fold TIM-barrel structure of family 10 xylanases; however, unlike non-alkaline active xylanases, it has a highly negatively charged surface and a deeper active site cleft. Mutational analysis of non-conserved amino acids which are close to the acid/base residue has shown that Val169, Ile170 and Asp171 are important to hydrolyze xylan at high pH. Unlike the wild type xylanase which has optimum pH at 9–9.5, the triple mutant xylanase (V169A, I170F and D171N), which was constructed using sequence information of alkaline sensitive xylanses was optimally active around pH 7. Compared to non-alkaline active xylanases, the alkaline active xylanases have highly acidic surfaces and fewer solvent exposed alkali labile residues. Based on these results obtained from sequence, structural and mutational analysis, the possible mechanisms of high pH stability and catalysis are discussed. This will provide useful information to understand the mechanism of high pH adaptation and engineering of enzymes that can be operationally stable at high pH.     

Streptococcus shiloi andStreptococcus difficile: Two new streptococcal species causing a meningoencephalitis in fish

The cellulolytic rumen bacteriumRuminococcus flavefaciens 17 was found to produce multiple xylanases ranging in apparent molecular weight from 55 to 200 kDa. A 55 kDa xylanase showed constitutive synthesis, but formation of the larger enzymes was increased in cultures grown with avicel, straw, or xylan, compared with cellobiose, as the energy source. At least six xylanases were detected in cultures grown with oat straw or oat xylan. Polyclonal antibodies were raised against the amino (A) or carboxy terminal (C) domains of the bifunctional XYNA product of the clonedR. flavefaciens xynA gene. Both antibody preparations recognized several xylanases larger than 80 kDa fromR. flavefaciens cells grown with avicel, straw, or xylan, indicating the production of multiple, antigenically related enzymes during growth on these substrates. Neither antibody preparation recognized the constitutive 55-kDa xylanase.     

Purification and characterization of a new xylanase (xylanase C) produced by Streptomyces lividans 66

Summary A third extracellular xylanase produced by Streptomyces lividans 66 was isolated from a clone obtained by shotgun cloning through functional complementation of a xylanase- and cellulase-negative mutant using the multicopy vector pIJ702. This enzyme, designated xylanase C, has a relative molecular mass of 22000 and acts on xylan similarly to xylanase B as an endo-type xylanase producing short-chain oligoxylosides. Its specific activity determined at 1100 IU·mg^–1 of protein corresponds on a molecular basis to that of xylanase B and is about three times that of xylanase A. The enzyme shows optimal activity at pH 6.0 and 57°C, values that correspond closely to those observed previously for xylanase A and B. Xylanase C appears not to be glycosylated and has a pI > 10.25. Its K _m and V _max on birchwood xylan are 4.1 mg·ml^–1 and 3.0 mol·min^–1·mg^–1 of enzyme respectively. Whereas specific antibodies raised against xylanase A show no cross-reaction with either xylanase B or with xylanase C, the anti-(xylanase C) antibodies react slightly with xylanase B but not with xylanase A. A comparison of hydrolysis products obtained by reacting individually the three enzymes with birchwood xylan showed characteristic endo-activity patterns for xylanases B and C, whereas xylanase A hydrolysed the substrate preferentially into xylobiose and xylotriose. Sequential xylanase action on the same substrates showed synergistic hydrolysis only when endo-xylanase activity was followed by that of xylanase A.     

Shifts in xylanases and the microbial community associated with xylan biodegradation during treatment with rumen fluid

Treatment with rumen fluid improves methane production from non-degradable lignocellulosic biomass during subsequent methane fermentation; however, the kinetics of xylanases during treatment with rumen fluid remain unclear. This study aimed to identify key xylanases contributing to xylan degradation and their individual activities during xylan treatment with bovine rumen microorganisms. Xylan was treated with bovine rumen fluid at 37°C for 48 h under anaerobic conditions. Total solids were degraded into volatile fatty acids and gases during the first 24 h. Zymography showed that xylanases of 24, 34, 85, 180, and 200 kDa were highly active during the first 24 h. Therefore, these xylanases are considered to be crucial for xylan degradation during treatment with rumen fluid. Metagenomic analysis revealed that the rumen microbial community’s structure and metabolic function temporally shifted during xylan biodegradation. Although statistical analyses did not reveal significantly positive correlations between xylanase activities and known xylanolytic bacterial genera, they positively correlated with protozoal (e.g., Entodinium, Diploplastron, and Eudiplodinium) and fungal (e.g., Neocallimastix, Orpinomyces, and Olpidium) genera and unclassified bacteria. Our findings suggest that rumen protozoa, fungi, and unclassified bacteria are associated with key xylanase activities, accelerating xylan biodegradation into volatile fatty acids and gases, during treatment of lignocellulosic biomass with rumen fluid.     

Production and Properties of Extracellular Endoxylanase from Neurospora crassa

Neurospora crassa 870 produced 14 and 0.025 U of extracellular xylanase (1,4-beta-d-xylan xylanohydrolase; EC 3.2.1.8) and beta-xylosidase (1,4-beta-xylan xylohydrolase; EC 3.2.1.37) per ml, respectively, in 4 days when commercial xylan was used as a carbon source. The effects of pH and carbon sources on xylanase production by N. crassa are discussed. Two xylanases (I and II) were purified and had pI values of 4.8 and 4.5 and molecular weights of 33,000 and 30,000. The maximum degree of hydrolysis of xylan by the extracellular culture broth was 66% in 4 h. The end products of xylan hydrolysis by xylanase I and II showed the presence of xylose, xylobiose, xylotriose, xylotetraose, xylopentose, and arabinose, indicating that they are endoxylanases capable of hydrolyzing 1,3-alpha-l-arabinofuranosyl branch points. Both xylanases showed activity toward carboxymethyl cellulose but no activity toward para-nitrophenyl-beta-d-xyloside or laminarin. Xylanase I showed appreciable activity toward para-nitrophenyl-beta-d-glucoside, whereas xylanase II was inactive.     

Fusion of yeast protoplasts and isolated nuclei of Fusarium moniliforme

Protoplasts of a xylose-fermenting yeast strain (a fusion product of Pachysolen tannophilus and Saccharomyces cerevisiae) were fused with isolated nuclei of the xylan degrading filamentous fungus Fusarium moniliforme. Polyethyleneglycol 4000 was used as the fusogenic agent. Fourteen stable hybrids showing xylanase activity were obtained. It can be assumed that this ability was acquired from the nuclear genome of the fungus, since the parental yeast strain did not show any xylanase activity. The enzymatic activity was determined quantitatively. The parental strain of the fungus reached its maximum xylanase activity of 796 nkat/ml at 96 h of growth. Four of the hybrids had a xylanase activity of between 211 and 297 nkat/l at 24 h of growth. Zymograms of these hybrids showed the presence of xylanases when grown on xylan as the sole carbon source. Using pulse field electrophoresis gels, no difference between the chromosome pattern of the fusion products and the parental yeast strain was observed.     

Biochemical properties of xylanases from a thermophilic fungus,Melanocarpus albomyces, and their action on plant cell walls

Melanocarpus albomyces, a thermophilic fungus isolated from compost by enrichment culture in a liquid medium containing sugarcane bagasse, produced cellulase-free xylanase in culture medium. The fungus was unusual in that xylanase activity was inducible not only by hemicellulosic material but also by the monomeric pentosan unit of xylan but not by glucose. Concentration of bagasse-grown culture filtrate protein followed by size-exclusion and anion-exchange chromatography separated four xylanase activities. Under identical conditions of protein purification, xylanase I was absent in the xylose-grown culture filtrate. Two xylanase activities, a minor xylanase IA and a major xylanase IIIA, were purified to apparent homogeneity from bagasse-grown cultures. Both xylanases were specific forβ-1,4 xylose-rich polymer, optimally active, respectively, at pH 6.6 and 5.6, and at 65°C. The xylanases were stable between pH 5 to 10 at 50°C for 24 h. Xylanases released xylobiose, xylotriose and higher oligomers from xylans from different sources. Xylanase IA had a M_r of 38 kDa and contained 7% carbohydrate whereas xylanase IIIA had a M_r of 24 kDa and no detectable carbohydrate. The K_m for larchwood xylan (mg ml⁻¹) and V_max (μmol xylose min⁻¹ mg⁻¹ protein) of xylanase IA were 0.33 and 311, and of xylanase IIIA 1.69 and 500, respectively. Xylanases IA, II and IIIA showed no synergism in the hydrolysis of larchwood glucuronoxylan or oat spelt and sugarcane bagasse arabinoxylans. They had different reactivity on untreated and delignified bagasse. The xylanases were more reactive than cellulase on delignified bagasse. Simultaneous treatment of delignified bagasse by xylanase and cellulase released more sugar than individual enzyme treatments. By contrast, the primary cell walls of a plant, particularly from the region of elongation, were more susceptible to the action of cellulase than xylanase. The effects of xylanase and cellulase on plant cell walls were consistent with the view that hemicellulose surrounds cellulose in plant cell walls.     

Characterization of a xylanase inhibitor TAXI-I from wheat

Xylanase inhibitor TAXI-I gene was cloned from wheat (Triticum aestivum L.) and then TAXI-I encoding sequence was expressed in Escherichia coli. The recombinant TAXI-I protein inhibited glycoside hydrolase (GH) family 11 xylanases in Aspergillus niger (Anx; a fungal xylanase), and Thermomonospora fusca (Tfx; a bacterial xylanase), and also inhibited hybrid xylanases Atx (a hybrid xylanase whose parents are T. fusca and A. niger) and Btx (a hybrid xylanase whose parents are T. fusca and Bacillus subtilis). Among the tested xylanases, A. niger xylanase was the most inhibited one by wheat xylanase inhibitor TAXI-I, while T. fusca xylanase was the least inhibited one. The profile of TAXI-I gene expression in wheat in response to phytohormones was also investigated. TAXI-I gene expression was drastically induced by methyl jasmonate (MeJa), and hardly detected in gibberellic acid (GA) treatment. Therefore, TAXI-I might be involved in plant defense against fungal and bacteria xylanases.     

Fusion of carbohydrate binding modules from <Emphasis Type="Italic">Thermotoga neapolitana</Emphasis> with a family 10 xylanase from <Emphasis Type="Italic">Bacillus halodurans</Emphasis> S7

Xylanase A of Thermotoga neapolitana contains binding domains both at the N- and C-terminal ends of the catalytic domain. In the N-terminal position it contains two carbohydrate-binding modules (CBM) which belong to family 22. These CBMs bind xylan but not to cellulose. The gene encoding the mature peptide of these CBMs was fused with an alkaline active GH10 xylanase from Bacillus halodurans S7 and expressed in Escherichia coli. The (His)₆ tagged hybrid protein was purified by immobilized metal affinity chromatography and characterized. Xylan binding by the chimeric protein was influenced by NaCl concentration and pH of the binding medium. Binding increased with increasing salt concentration up to 200 mM. Higher extent of binding was observed under acidic conditions. The fusion of the CBM structures enhanced the hydrolytic efficiency of the xylanase against insoluble xylan, but decreased the stability of the enzyme. The optimum temperature and pH for the activity of the xylanase did not change.     

Family-10 and Family-11 xylanases differ in their capacity to enhance the bleachability of hardwood and softwood paper pulps

Enzyme-aided bleaching of softwood and hardwood kraft pulps by glycosyl hydrolase family-10 and -11 xylanases and a family-26 mannanase was investigated. The ability to release reducing sugar from pulp xylan and to enhance bleachability is not a characteristic shared by all xylanases. Of the six enzymes tested, two xylanases belonging to family 11 were most effective at increasing bleachability and improving final paper brightness. None of the enzymes had a deleterious effect on pulp fibre integrity. The efficiency of individual xylanases as bleach enhancers was not dependent on the source microorganism, and could not be predicted solely on the basis of the quantity or nature of products released from pulp xylan. Cooperative interactions between xylanase/xylanase and xylanase/mannanase combinations, during the pretreatment of softwood and hardwood pulps, were investigated. Synergistic effects on reducing-sugar release and kappa number reduction were elicited by a combination of two family-10 xylanases. Pretreatment of kraft pulp with mannanase A from Pseudomonas fluorescens subsp. cellulosa and any one of a number of xylanases resulted in increased release of reducing sugar and a larger reduction in kappa number than obtained with the xylanases alone, confirming the beneficial effects of family-26 mannanases on enzyme-aided bleaching of paper pulp. Received: 6 January 1997 / Received revision: 10 April 1997 / Accepted: 19 April 1997     

Characterization of a thermostable and alkaline xylanase from Bacillus sp. and its bleaching impact on wheat straw pulp

Delignification efficacy of xylanases to facilitate the consequent chemical bleaching of Kraft pulps has been studied widely. In this work, an alkaline and thermally stable cellulase-less xylanase, derived from a xylanolytic Bacillus subtilis, has been purified by a combination of gel filtration and Q-Sepharose chromatography to its homogeneity. Molecular weight of the purified xylanase was 61 kDa by SDS–PAGE. The purified enzyme revealed an optimum assay temperature and pH of 60°C and 8.0, respectively. Xylanase was active in the pH range of 6.0–9.0 and stable up to 70°C. Divalent ions like Ca²⁺, Mg²⁺ and Zn²⁺ enhanced xylanase activity, whereas Hg²⁺, Fe²⁺, and Cu²⁺ were inhibitory to xylanase at 2 mM concentration. It showed K _m and V _max values of 9.5 mg/ml and 53.6 μmol/ml/min, respectively, using birchwood xylan as a substrate. Xylanase exhibited higher values of turn over number (K _cat) and catalytic efficiency (K _cat/K _m) with birchwood xylan than oat spelt xylan. Bleach-boosting enzyme activity at 30 U/g dry pulp displayed the optimum bio-delignification of Kraft pulp resulting in 26.5% reduction in kappa number and 18.5% ISO induction in brightness at 55°C after 3 h treatment. The same treatment improved the pulp properties including tensile strength and burst index, demonstrating its potential application in pre-bleaching of Kraft pulp.