Genome mapping by arbitrary amplification of yeast artificial chromosomes

Several methods have been described for using the polymerase chain reaction (PCR) to isolate fragments of DNA for genome mapping. We have developed an approach for isolating discrete fragments by amplifying DNA with single oligonucleotides (10-mers) with arbitrarity selected sequences. The method is rapid and technically simple. We isolated fragments from a contig of three yeast artificial chromosomes (YACs) from the human Xq28 chromosomal region. We purified YACs yWXD 37, yWXD348, and yWXD705 from a preparative pulsed field gel. Amplifications of each YAC were performed with single 10-mers as the PCR primers and the products were visualized on agarose gels. These fragments have been successfully used as hybridization probes against Southern blots containing the YACs and against blots containing human genomic DNA and somatic cell hybrids containing Xq28 as their only human constituent. The results have been concordant with the known order of the YACs. We have also successfully combined 10-mers with primers derived from vector arm sequences to isolate YAC ends. We discuss several uses of this method in comparative mapping and in filling in gaps in physical and genetic maps.     

Construction and characterization of a rice YAC library for physical mapping

Genomic libraries of rice,Oryza sativa L. cv. Nipponbare, in yeast artificial chromosomes were prepared for construction of a rice physical map. High-molecular-weight genomic DNA was extracted from cultured suspension cells embedded in agarose plugs. After size fractionation of theEco RI- andNot I-digested DNA fragments, they were ligated with pYAC4 and pYAC55, respectively, and used to transformSaccharomyces cerevisiae AB1380. A total of 6932 clones were obtained containing on average ca. 350 kb DNA. The YAC library was estimated to contain six haploid genome equivalents. The YACs were examined for their chimerism by mapping both ends on an RFLP linkage map. Most YACs withEco RI fragments below 400 kb were intact colinear clones. About 40% of clones were chimeric. Genetic mapping of end clones from large size YACs revealed that the physical distance corresponding to 1 cM genetic distance varies from 120 to 1000 kb, depending on the chromosome region. To select and order YAC clones for making contig maps, high-density colony hybridization using ECL was applied. With several probes, at least one and at most ten YAC clones could be selected in this library. The library size and clone insert size indicate that this YAC library is suitable for physical map construction and map-based cloning.     

In situ hybridization to cytogenetic bands of yeast artificial chromosomes covering 50% of human Xq24-Xq28 DNA

From the collection described by Abidi et al., 102 yeast artificial chromosomes (YACs) with human DNA inserts more than 300 kb in length were assigned to chromosomal band positions on early metaphase chromosomes by in situ hybridization using the biotin-avidin method. All the YACs hybridized within the Xq24-Xqter region, supporting the origin of the vast majority of the YACs from single human X-chromosomal sites. With assignments precise to +/- 0.5 bands, YACs were distributed among cytogenetic bands to roughly equal extents. Thus, there is no gross bias in the cloning of DNA from different bands into large YACs. To test band assignments further, hybridizations were carried out blind, and band positions were then compared with (1) probe localizations in cases in which a reported location was present in one of the YACs; (2) cross-hybridization of a labeled YAC with others in the collection; and (3) hybridization to a panel of DNAs from a series of hybrid cells containing Xq DNA truncated at various regions. Of 31 cases in which YACs contained a probe with a previously reported location, 28 in situ assignments were in agreement, and 14 other assignments, including one of the three discordant with probe localization, were confirmed by YAC cross-hybridization studies. Results with a group of nine YACs were further confirmed with a panel of somatic cell hybrid DNAs from that region. Five YACs hybridized both to Xq25 and to a second site (four in Xq27 and one in Xq28), suggestive of some duplication of DNA of the hybrid cell and perhaps in normal X chromosomes. The in situ assignments are thus sufficient to place YACs easily and systematically within bins of about 7-10 Mb and to detect some possible anomalies. Furthermore, on the basis of expectations for random cloning of DNA in YACs, the assigned YACs probably cover more than 50% of the total Xq24-Xq28 region. This provides one way to initiate the assembly of YAC contigs over extended chromosomal regions.     

Distribution of moderately repetitive sequences pTR5 and LF1 in Xq24-q28 human DNA and their use in assembling YAC contigs.

Xq24-q28 DNA, from a hamster/human hybrid cell containing only that portion of the human X chromosome, was found to contain 56 TaqI restriction fragments that hybridized to the moderately repetitive sequence pTR5. Using the pTR5 sequence as a probe in colony hybridization, 136 cognate yeast artificial chromosome (YAC) clones were detected among a collection of 820 containing about three genomic equivalents of the Xq24-q28 DNA. The YACs were then grouped into 48 contigs and single clones containing one or more of the TaqI fragments. Overlaps were confirmed both by fingerprinting YACs with AluI and L1 probes and by additional information. A less complete analysis was also carried out with a second moderately repetitive sequence, LF1, and some smaller contigs were merged into larger ones. Moderately repetitive sequences can thus be used as probes for multiple loci in single hybridization experiments and can help to organize and confirm YAC overlaps during the development of maps with long-range contiguity.     

通过染色体步查建立水稻G200座位的重叠群

分别以G200及其旁侧区的Y2587L、Y4073L和L688片段为探针筛选水稻基因组YAC文库,共得到4个阳性克隆,均与G200、Y2587L和Y4073L座位重叠,插入片段的大小为240～650kb。用反向PCR法分离YAC克隆插入片段的末端序列,并利用这些末端序列确定克隆的方向以及进行染色体步查,共筛选到7个YAC克隆,建立了一个8厘摩(cM)的G200 YAC重叠群。     

A yeast artificial chromosome contig containing the complete Duchenne muscular dystrophy gene.

A contig of 36 overlapping yeast artificial chromosome (YAC) clones has been constructed for the complete Duchenne muscular dystrophy (DMD) gene in Xp21. The YACs were isolated from a human 48,XXXX YAC library using the DMD cDNA and brain promoter fragments as hybridization probes. The YAC clones were characterized for exon content using HindIII or EcoRI digests, hybridization of individual DMD cDNA probes, and polymerase chain reaction (PCR) amplification of specific exons near the 5' end of the gene. For comparison to the known long-range restriction map of the DMD gene, YAC clones were digested with SfiI and hybridized with DMD cDNA probes. The combined analysis of the exon content and the SfiI map allowed an approximately 3.2-Mb YAC contig to be constructed. The complete 2.4-Mb DMD gene could be represented in a minimum set of 7 overlapping YAC clones.     

Yeast artificial chromosomes containing human Xq24-Xq28 DNA: library construction and representation of probe sequences

A library of yeast artificial chromosomes (YACs) with human DNA inserts has been assembled from a human/hamster somatic cell hybrid containing Xq24-Xqter human DNA. Screening of the agar-embedded transformants for human DNA used a manifold of 3000 stainless-steel pins to transfer colonies onto the surface of media. This facilitated the recovery of the 1 in 300 clones that contained a human DNA insert (the remainder had hamster DNA and were discarded). The library described here consists of about two genomic equivalents (102 Mb) of human DNA in 467 clones: 167 were generated by EcoRI partial digestion and contain 25.5 Mb of human DNA; 252 used partial digestion with TaqI and cover 64.2 Mb; and 48 were from sheared DNA inserts and cover 11.7 Mb. Clones were screened by hybridization with 70 probes previously assigned to Xq24-Xq28. Eleven probes did not hybridize to any YACs in the library, and 16 probes hybridized to one YAC each, 23 to two, 13 to three, and 7 to four. Also, individual YACs large enough to detect features like the clustering of polymorphic sequences in subregions of Xq24-Xqter have been obtained. For example, XY58 contained five probe sequences previously independently isolated. The overall yield of YACs containing probe sequences was indistinguishable from Poisson statistical expectations for random cloning (P = 0.9). Thus, YAC libraries such as the one described here can include most, if not all, of the sequences in the source DNA from which the library is derived. These results support the possibility that YACs may provide a reliable bridge between linkage studies and conventional recombinant DNA analyses in mapping of the human genome.     

PCR amplification and analysis of yeast artificial chromosomes

A strategy for the analysis of yeast artificial chromosome (YAC) clones that relies on polymerase chain reaction (PCR) amplification of small restriction fragments from isolated YACs following adapter ligation was developed. Using this method, termed YACadapt, we have amplified several YACs from a human Xq24-qter library and have used the PCR products for physical mapping by somatic cell hybrid deletion analysis and fluorescent in situ hybridization. One YAC, RS46, was mapped to band Xq27.3, near the fragile X mutation. The PCR product is an excellent renewable source of YAC DNA for analyses involving hybridization of YAC inserts to a variety of DNA/RNA sources.     

A 1.6-Mb contig of yeast artificial chromosomes around the human factor VIII gene reveals three regions homologous to probes for the DXS115 locus and two for the DXYS64 locus.

Two yeast artificial chromosome (YAC) libraries were screened for probes in Xq28, around the gene for coagulation factor VIII (F8). A set of 30 YACs were recovered and assembled into a contig spanning at least 1.6 Mb from the DXYS64 locus to the glucose 6-phosphate dehydrogenase gene (G6PD). Overlaps among the YACs were determined by several fingerprinting techniques and by additional probes generated from YAC inserts by using Alu-vector or ligation-mediated PCR. Analysis of more than 30 probes and sequence-tagged sites (STSs) made from the region revealed the presence of several homologous genomic segments. For example, a probe for the DXYS64 locus, which maps less than 500 kb 5' of F8, detects a similar but not identical locus between F8 and G6PD. Also, a probe for the DXS115 locus detects at least three identical copies in this region, one in intron 22 of F8 and at least two more, which are upstream of the 5' end of the gene. Comparisons of genomic and YAC DNA suggest that the multiple loci are not created artifactually during cloning but reflect the structure of uncloned human DNA. On the basis of these data, the most likely order for the loci analyzed is tel-DXYS61-DXYS64-(DXS115-3-DXS115-2)-5'F8-(D XS115-1)-3'F8-G6PD.     

Fine mapping and cloning of the breakpoint associated with Menkes syndrome in a female patient.

The gene responsible for Menkes syndrome has been assigned to Xq13 by a combination of comparative mapping and linkage analysis. A previous report has mapped the translocation breakpoint associated with the disease in a female patient to an interval delimited by PGK1 and a group of six more proximal Xq13 markers, including DXS56. We have characterized a number of PGK1- or DXS56-positive YACs, from which we have generated six new markers. One of them identifies a small overlap region between a PGK1-positive YAC and three DXS56-positive YACs, distal to the Menkes breakpoint. A 560-kb region covered by a DXS56-positive YAC has been restriction-mapped and subcloned, disclosing a 187-kb MluI fragment astride the breakpoint. A probe mapping distal to the rearrangement in the same interval reveals altered PGFE fragments in a hybrid constructed from the translocation patient's DNA. We describe the development of a cosmid contig extending 150 kb from a nearby CpG island across the breakpoint. This contig includes four adjacent clones displaying cross-specific hybridization.     

A random STS strategy for construction of YAC contigs spanning defined chromosomal regions.

Sequence tagged sites (STSs) that were generated via Alu-element-mediated polymerase chain reaction (Alu-PCR) and mapped to human Xq26 were used to isolate and overlap yeast artificial chromosomes (YACs). By collating the results of primary pool screening, the order of STSs and YACs was postulated directly. Subsequent isolation of 11 key YACs from 75 positive pools confirmed the proposed contig. Although only a small subset of the available Alu-PCR fragments was used, the STSs were generated at sufficient density to isolate all the YACs required and to identify all except one overlap directly. The results confirmed physical linkage of HPRT to DXS86 and DXS144E. Long-range continuity was determined purely by analysis of the 11 YAC colonies and required no end-rescue. This strategy is therefore an effective approach for the construction of YAC contigs spanning discrete chromosomal regions contained within somatic cell hybrids, with minimal prior knowledge of the region.     

High-resolution, human–bovine comparative mapping based on a closed YAC contig spanning the bovine mh locus

A closed YAC contig spanning the mh locus was assembled by STS content mapping with seven microsatellite markers, eight genes or EST, and nine STS corresponding to YAC ends. The contig comprises 27 YACs, has an average depth of 4.3 YACs, and spans an estimated 1.2 Mb. A linkage map was constructed based on five of the microsatellite markers anchored to the contig and shown to span 7 cM, yielding a ratio of 160 kb/1 cM for the corresponding chromosome region. Comparative mapping data indicate that the constructed contig spans an evolutionary breakpoint connecting two chromosome segments that are syntenic but not adjacent in the human. Consolidation of human gene order by means of whole genome radiation hybrids and its comparison with the bovine order as inferred from the contig confirm conservation of gene order within segments. Received: 6 August 1998 / Accepted: 28 October 1998     

A test case for physical mapping of human genome by repetitive sequence fingerprints: construction of a physical map of a 420 kb YAC subcloned into cosmids.

A rapid and safe method of Yeast Artificial Chromosome (YAC) physical mapping by cosmid 'fingerprinting' is presented. YACs are subcloned into cosmids which are prepared without previous separation of cloned DNA from host DNA. Groups of overlapping clones are detected according to their restriction fragments size and intensity after hybridization with total human DNA. To test this approach, a cosmid library was constructed from total DNA of a yeast strain containing a 420 kb YAC. A single contig of 84 clones was obtained with a minimal detectable overlap of 60% i.e. a 9.2 fold representative library. Large scale physical mapping of YACs would take full advantage of the DNA preparation procedure employed in this work and allows to take into account restriction fragment intensities.     

Human Xq24-Xq28: approaches to mapping with yeast artificial chromosomes.

One hundred twenty-seven yeast strains with artificial chromosomes containing Xq24-Xqter human DNA were obtained starting from a human/hamster somatic cell hybrid. The clones were characterized with respect to their insert size, stability, and representation of a set of Xq24-Xqter DNA probes. The inserts of the clones add up to 19.3 megabase (Mb) content, or about 0.4 genomic equivalents of that portion of the X chromosome, with a range of 40-650 kb in individual YACs. Eleven clones contained more than one YAC, the additional ones usually having hamster DNA inserts; the individual YACs could be separated by extracting the total DNA from such strains and using it to retransform yeast cells. One of the YACs, containing the probe for the DXS49 locus, was grossly unstable, throwing off smaller versions of an initial 300-kb YAC during subculture; the other YACs appeared to breed true on subculture. Of 52 probes tested, 12 found cognate YACs; the YACs included one with the glucose-6-phosphate dehydrogense gene and another containing four anonymous probe sequences (DX13, St14, cpx67, and cpx6). Xq location of YACs is being verified by in situ hybridization to metaphase chromosomes, and fingerprinting and hybridization methods are being used to detect YACs that overlap.     

Physical mapping of genes to specific chromosomes in Dictyostelium discoideum.

Cloned genes were used to probe a highly redundant library of large cloned fragments of the Dictyostelium discoideum genome carried in yeast artificial chromosomes (YACs). Each gene recognized several independent YAC clones, thereby grouping them into a contig. Individual YACs were arranged within the contig by positioning genes relative to rare restriction sites and the YAC ends. Genes that had been previously assigned to one of the six linkage groups by parasexual genetics were used to establish physically mapped regions on specific chromosomes. Previously unmapped genes were assigned to specific chromosomes when they recognized members of a mapped contig. Linkage was confirmed by congruence of large-scale restriction maps centered on either the previously mapped or the newly mapped genes. At present, the chromosome-assigned map segments comprise approximately 50% of the genome. About half of each map segment is covered by overlapping YACs.     

A YAC Contig of Approximately 3 Mb from Human Chromosome 5q31 → q33

The human chromosome 5q31-q33 region contains an interesting cluster of growth factor and receptor genes. In addition, several genetic disease loci have been localized within this region, but have not as yet been isolated as molecular clones. These include those loci involved in autosomal dominant limb-girdle muscular dystrophy, diastrophic dysplasia. Treacher Collins syndrome, and myeloid disorders associated with the 5q- syndrome. A yeast artificial chromosome (YAC) contig of this region would assist in the further localization and isolation of these genes. We have used YACs isolated from the Washington University and Centre d'Etude du Polymorphisme Humain YAC libraries, including YACs from the large insert (mega) YAC library to build a contig greater than 3 Mb in size. An STS content strategy coupled with limited walking from YAC ends was used to isolate 22 overlapping YACs with as much as sixfold coverage. A total of 20 STSs, derived from genes, anonymous sequences, and vector Alu-PCR or inverse PCR products, were used to compile this contig. The order of loci, centromere-GRL-D5S207-D5S70-D5S545-D5S546-D5S547-D5S68-D5S548-D5S210-D5S549-D5S686-ADRB2-D5S559-CSF1R-D5S551-RPS14-D5S519-SPARC-telomere, was derived from the overlapping clones. This contig and clones derived from it will be useful substrates in selecting candidate cDNAs for the disease loci in this interval.     

A bacterial artificial chromosome (BAC) library of sugar beet and a physical map of the region encompassing the bolting gene <Emphasis Type="Italic"> B</Emphasis>

In sugar beet (Beta vulgaris L.), early bolting is caused by a single dominant gene, designated B. Twenty AFLP markers selected from a 7.8-cM segment of the B region on chromosome 2 were used to screen a YAC library, and a first-generation physical map including the B gene, made up of 11 YACs, was established. Because the genome coverage of the YAC library was low, a BAC library was constructed in the vector pBeloBAC11. This library consists of 57,600 clones with an average insert size of 116 kb, corresponding to 8.8 genome equivalents. Screening of the BAC library with chloroplast and mitochondrial DNA probes indicated that less than 0.1% of the clones contained organelle-derived DNA. To fill the gaps in the physical map around the B gene, the BAC library was screened with four AFLP markers and 10 YAC-derived probes. In total, 54 different BACs were identified. Overlaps between BACs were detected by using BAC termini amplified by PCR as probes, and by RFLP fingerprinting. In this way, a minimal tiling path of the central 4.6-cM region was constructed, which consists of 14 BACs. The B locus was localized to a 360-kb contig, a size which makes positional cloning of the gene feasible.     

Comparative mapping on the mouse X Chromosome defines a myotubular myopathy equivalent region

The gene for X-linked myotubular myopathy (MTM1) has been localized to a 300-kb critical region in human Xq28 between IDS and GABRA3. As part of an effort to clone this gene, we developed a YAC contig on the mouse X Chromosome (Chr) which includes loci homologous to those within the human MTM1 critical region. The murine contig consists of 18 YACs and spans 2.5–3.0 Mb. We have aligned the human and murine physical maps by isolating conserved mouse genomic fragments, including CpG islands and trapped exons. We believe that the simultaneous isolation of genes from both mouse and human and continued comparative mapping will prove helpful in the eventual identification of MTM1 and other genes in the region. Received: 9 February 1996 / Accepted: 30 March 1996     

Use of repetitive DNA probes as physical mapping strategy in Caenorhabditis elegans.

A method for linking genomic sequences cloned in yeast artificial chromosomes (YACs) has been tested using Caenorhabditis elegans as a model system. Yeast clones carrying YACs with repeated sequences were selected from a C. elegans genomic library, total DNA was digested with restriction enzymes, transferred to nylon membranes and probed with a variety of repetitive DNA probes. YAC clones that overlap share common bands with one or more repetitive DNA probes. In 159 YAC clones tested with one restriction enzyme and six probes 28 overlapping clones were detected. The advantages and limitations of this method for construction of YAC physical maps is discussed.     

Construction of a potato YAC library and identification of clones linked to the disease resistance loci R1 and Gro1

 A yeast artificial chromosome (YAC) library was constructed from high-molecular-weight DNA of potato (Solanum tuberosum). Potato DNA fragments obtained after complete digestion with four different rare-cutter restriction enzymes were cloned using the pYAC-RC vector. The library consists of 21 408 YAC clones with an average insertion size of 140 kb. The frequency of YAC clones having insertions of chloroplast or mitochondrial DNA was estimated to be 0.5% and 0.3%, respectively. The YAC library was screened by PCR with 11 DNA markers detecting single genes or small gene families in the potato genome. YACs for 8 of the 11 markers were detected in the library. Using 2 markers that are linked to the resistance genes R1 and Gro1 of potato, we isolated two individual YAC clones. One of these YAC clones was found to harbour one member of a small family of candidate genes for the nematode resistance gene Gro1. Received : 5 May 1997 / Accepted : 20 May 1997