The unipolar Shigella surface protein IcsA is targeted directly to the bacterial old pole: IcsP cleavage of IcsA occurs over the entire bacterial surface

Shigella flexneri is an intracellular pathogen that is able to move within the cytoplasm of infected cells by the continual assembly of actin onto one pole of the bacterium. IcsA, an outer membrane protein, is localized to the old pole of the bacterium and is both necessary and sufficient for actin assembly. IcsA is slowly cleaved from the bacterial surface by the protease IcsP (SopA). Absence of IcsP leads to an alteration in the distribution of surface IcsA, such that the polar cap is maintained and some IcsA is distributed along the lateral walls of the bacillus. The mechanism of unipolar localization of IcsA and the role of IcsP in its unipolar localization are incompletely understood. Here, we demonstrate that cleavage of IcsA occurs exclusively in the outer membrane and that IcsP is localized to the outer membrane. In addition, we show that IcsA at the old pole is susceptible to cleavage by IcsP and that native IcsP is active at the pole. Taken together, these data indicate that IcsP cleaves IcsA over the entire bacterial surface. Finally, we show that, immediately after induction from a tightly regulated promoter, IcsA is expressed exclusively at the old pole in both the icsP- icsA- and the icsA- background. These data demonstrate that unipolar localization of IcsA results from its direct targeting to the pole, followed by its diffusion laterally in the outer membrane.     

SopA, the outer membrane protease responsible for polar localization of IcsA in Shigella flexneri

The spreading ability of Shigella flexneri , a facultative intracellular Gram-negative bacterium, within the host-cell cytoplasm is the result of directional assembly and accumulation of actin filaments at one pole of the bacterium. IcsA/VirG, the 120 kDa outer membrane protein that is required for intracellular motility, is located at the pole of the bacterium where actin polymerization occurs. Bacteria growing in laboratory media and within infected cells release a certain proportion of the surface-exposed IcsA after proteolytic cleavage. In this study, we report the characterization of the sopA gene which is located on the virulence plasmid and encodes the protein responsible for the cleavage of IcsA. The deduced amino acid sequence of SopA exhibits 60% identity with those of the OmpT and OmpP outer membrane proteases of Escherichia coli . The construction and phenotypic characterization of a sopA mutant demonstrated that SopA is required for exclusive polar localization of IcsA on the bacterial surface and proper expression of the motility phenotype in infected cells.     

IcsA, a polarly localized autotransporter with an atypical signal peptide, uses the Sec apparatus for secretion, although the Sec apparatus is circumferentially distributed

Asymmetric localization of proteins is essential to many biological functions of bacteria. Shigella IcsA, an outer membrane protein, is localized to the old pole of the bacillus, where it mediates assembly of a polarized actin tail during infection of mammalian cells. Actin tail assembly provides the propulsive force for intracellular movement and intercellular dissemination. Localization of IcsA to the pole is independent of the amino-terminal signal peptide (Charles, M., Perez, M., Kobil, J.H., and Goldberg, M.B., 2001, Proc Natl Acad Sci USA 98: 9871-9876) suggesting that IcsA targeting occurs in the bacterial cytoplasm and that its secretion across the cytoplasmic membrane occurs only at the pole. Here, we characterize the mechanism by which IcsA is secreted across the cytoplasmic membrane. We present evidence that IcsA requires the SecA ATPase and the SecYEG membrane channel (translocon) for secretion. Our data suggest that YidC is not required for IcsA secretion. Furthermore, we show that polar localization of IcsA is independent of SecA. Finally, we demonstrate that while IcsA requires the SecYEG translocon for secretion, components of this apparatus are uniformly distributed within the membrane. Based on these data, we propose a model for coordinate polar targeting and secretion of IcsA at the bacterial pole.     

Periplasmic transit and disulfide bond formation of the autotransported Shigella protein IcsA

The Shigella outer membrane protein IcsA belongs to the family of type V secreted (autotransported) virulence factors. Members of this family mediate their own translocation across the bacterial outer membrane: the carboxy-terminal beta domain forms a beta barrel channel in the outer membrane through which the amino-terminal alpha domain passes. IcsA, which is localized at one pole of the bacterium, mediates actin assembly by Shigella, which is essential for bacterial intracellular movement and intercellular dissemination. Here, we characterize the transit of IcsA across the periplasm during its secretion. We show that an insertion in the dsbB gene, whose gene product mediates disulfide bond formation of many periplasmic intermediates, does not affect the surface expression or unipolar targeting of IcsA. However, IcsA forms one disulfide bond in the periplasm in a DsbA/DsbB-dependent fashion. Furthermore, cellular fractionation studies reveal that IcsA has a transient soluble periplasmic intermediate. Our data also suggest that IcsA is folded in a proteinase K-resistant state in the periplasm. From these data, we propose a novel model for the secretion of IcsA that may be applicable to other autotransported proteins.     

Biogenesis of YidC Cytoplasmic Membrane Substrates Is Required for Positioning of Autotransporter IcsA at Future Poles

Localization of proteins to specific sites within bacterial cells is often critical to their function. In rod-shaped bacteria, proteins involved in diverse and important cell processes localize to the cell poles. The molecular mechanisms by which these proteins are targeted to the pole, however, are poorly understood. The Shigella autotransporter protein IcsA, which is localized to the pole on the surface of the bacterium, is targeted to the pole in the cytoplasm by a mechanism that is conserved across multiple Gram-negative bacterial species and has thus served as an important and informative model for studying polar localization. We present evidence that in Escherichia coli, the establishment of polar positional information recognized by IcsA requires the activity of the cytoplasmic membrane protein insertase YidC. We show that the role of YidC in IcsA localization is independent of the cell septation and cytokinesis proteins FtsQ and FtsEX. FtsQ is required for polar localization of IcsA and, based on cross-linking studies, is inserted in the vicinity of YidC, but, we find, is not dependent on YidC for membrane insertion. FtsEX is a YidC substrate, but we find that it is not required for polar localization of IcsA. These findings indicate that polar positional information recognized by IcsA depends on one or more membrane proteins that require YidC for proper membrane insertion.     

Actin-based motility is sufficient for bacterial membrane protrusion formation and host cell uptake

Shigella flexneri replicates in the cytoplasm of host cells, where it nucleates host cell actin filaments at one pole of the bacterial cell to form a 'comet tail' that propels the bacterium through the host's cytoplasm. To determine whether the ability to move by actin-based motility is sufficient for subsequent formation of membrane-bound protrusions and intercellular spread, we conferred the ability to nucleate actin on a heterologous bacterium, Escherichia coli . Previous work has shown that IcsA (VirG), the molecule that is necessary and sufficient for actin nucleation and actin-based motility, is distributed in a unipolar fashion on the surface of S. flexneri . Maintenance of the unipolar distribution of IcsA depends on both the S. flexneri outer membrane protease IcsP (SopA) and the structure of the lipopolysaccharide (LPS) in the outer membrane. We co-expressed IcsA and IcsP in two strains of E. coli that differed in their LPS structures. The E. coli were engineered to invade host cells by expression of invasin from Yersinia pseudotuberculosis and to escape the phagosome by incubation in purified listeriolysin O (LLO) from Listeria monocytogenes . All E. coli strains expressing IcsA replicated in host cell cytoplasm and moved by actin-based motility. Actin-based motility alone was sufficient for the formation of membrane protrusions and uptake by recipient host cells. The presence of IcsP and an elaborate LPS structure combined to enhance the ability of E. coli to form protrusions at the same frequency as S. flexneri , quantitatively reconstituting this step in pathogen intercellular spread in a heterologous organism. The frequency of membrane protrusion formation across all strains tested correlates with the efficiency of unidirectional actin-based movement, but not with bacterial speed.     

Mutagenesis of the Shigella flexneri autotransporter IcsA reveals novel functional regions involved in IcsA biogenesis and recruitment of host neural Wiscott-Aldrich syndrome protein

The IcsA (VirG) protein of Shigella flexneri is a polarly localized, outer membrane protein that is essential for virulence. Within host cells, IcsA activates the host actin regulatory protein, neural Wiskott-Aldrich syndrome protein (N-WASP), which in turn recruits the Arp2/3 complex, which nucleates host actin to form F-actin comet tails and initiate bacterial motility. Linker insertion mutagenesis was undertaken to randomly introduce 5-amino-acid in-frame insertions within IcsA. Forty-seven linker insertion mutants were isolated and expressed in S. flexneri Delta icsA strains. Mutants were characterized for IcsA protein production, cell surface expression and localization, intercellular spreading, F-actin comet tail formation, and N-WASP recruitment. Using this approach, we have identified a putative autochaperone region required for IcsA biogenesis, and our data suggest an additional region, not previously identified, is required for N-WASP recruitment.     

IcsA surface presentation in Shigella flexneri requires the periplasmic chaperones DegP, Skp, and SurA

A Shigella flexneri degP mutant, which was defective for plaque formation in Henle cell monolayers, had a reduced amount of IcsA detectable on the bacterial surface with antibody. However, the mutant secreted IcsA to the outer membrane at wild-type levels. This suggests that IcsA adopts an altered conformation in the outer membrane of the degP mutant with reduced exposure on the cell surface. IcsA is, therefore, unlikely to be accessible to actin-nucleating proteins within the eukaryotic cell cytoplasm, which is required for bacterial movement within the host cell and cell-to-cell spread. The degP mutant was somewhat more sensitive to detergents, antibiotics, and the antimicrobial peptide magainin, indicating that the degP phenotype was not limited to IcsA surface presentation. The plaque defect of the degP mutant, which is independent of DegP protease activity, was suppressed by overexpression of the periplasmic chaperone Skp but not by SurA. S. flexneri skp and surA mutants failed to form plaques in Henle cell monolayers and were defective in cell surface presentation and polar localization of IcsA. Therefore, the three periplasmic folding factors DegP, Skp, and SurA were all required for IcsA localization and plaque formation by S. flexneri.     

Branching sites and morphological abnormalities behave as ectopic poles in shape-defective Escherichia coli

Certain mutants in Escherichia coli lacking multiple penicillin-binding proteins (PBPs) produce misshapen cells containing kinks, bends and branches. These deformed regions exhibit two structural characteristics of normal cell poles: the peptidoglycan is inert to dilution by new synthesis or turnover, and a similarly stable patch of outer membrane caps the sites. To test the premise that these aberrant sites represent biochemically functional but misplaced cell poles, we assessed the intracellular distribution of proteins that localize specifically to bacterial poles. Green fluorescent protein (GFP) hybrids containing polar localization sequences from the Shigella flexneri IcsA protein or from the Vibrio cholerae EpsM protein formed foci at the poles of wild-type E. coli and at the poles and morphological abnormalities in PBP mutants. In addition, secreted wild-type IcsA localized to the outer membrane overlying these aberrant domains. We conclude that the morphologically deformed sites in these mutants represent fully functional poles or pole fragments. The results suggest that prokaryotic morphology is driven, at least in part, by the controlled placement of polar material, and that one or more of the low-molecular-weight PBPs participate in this process. Such mutants may help to unravel how particular proteins are targeted to bacterial poles, thereby creating important biochemical and functional asymmetries.     

Cleavage of Shigella surface protein VirG occurs at a specific site, but the secretion is not essential for intracellular spreading.

The large plasmid-encoded outer membrane protein VirG (IcsA) of Shigella flexneri is essential for bacterial spreading by eliciting polar deposition of filamentous actin (F-actin) in the cytoplasm of epithelial cells. Recent studies have indicated that VirG is located at one pole on the surface of the bacterium and secreted into the culture supernatant and that in host cells it is localized along the length of the F-actin tail. The roles of these VirG phenotypes in bacterial spreading still remain to be elucidated. In this study, we examined the surface-exposed portion of the VirG protein by limited trypsin digestion of S. flexneri YSH6000 and determined the sites for VirG processing during secretion into the culture supernatant. Our results indicated that the 85-kDa amino-terminal portion of VirG is located on the external side of the outer membrane, while the 37-kDa carboxy-terminal portion is embedded in it. The VirG cleavage required for release of the 85-kDa protein into the culture supernatant occurred at the Arg-Arg bond at positions 758 to 759. VirG-specific cleavage was observed in Shigella species and enteroinvasive Escherichia coli, which requires an as yet unidentified protease activity governed by the virB gene on the large plasmid. To investigate whether the VirG-specific cleavage occurring in extracellular and intracellular bacteria is essential for VirG function in bacterial spreading, the Arg-Arg cleavage site was modified to an Arg-Asp or Asp-Asp bond. The virG mutants thus constructed were capable of unipolar deposition of VirG on the bacterial surface but were unable to cleave VirG under in vitro or in vivo conditions. However, these mutants were still capable of eliciting aggregation of F-actin at one pole, spreading into adjacent cells, and giving rise to a positive Sereny test. Therefore, the ability to cleave and secrete VirG in Shigella species is not a prerequisite for intracellular spreading.     

Lipopolysaccharide O antigen chains mask IcsA (VirG) in Shigella flexneri

Shigella flexneri 2a strain 2457T lipopolysaccharide (LPS) has O antigen (Oag) chains with two modal lengths (S-type and VL-type), and has IcsA apparently located at one pole on its cell surface. Treatment of Y serotype derivatives of 2457T and RMA696 (2457T wzz(SF)) with Sf6 tailspike protein (TSP) resulted in hydrolysis of Oag chains, and an increase in detection of IcsA by indirect immunofluorescence staining on both the lateral and polar regions of the cell surface. Newly synthesised IcsA expressed from a pBAD promoter in a S. flexneri Y strain was also detected on both the lateral and polar regions of the cell when incubated with TSP prior to immunofluorescence staining. We conclude that IcsA is actually located on both lateral and polar regions of the S. flexneri cell surface, and that LPS Oag chains mask the presence of IcsA by hindering its detection with antibodies. These results have implications for the mechanism of IcsA export. They suggest that while IcsA export is predominantly targeted to the old cell pole, it can also occur on the lateral regions of the cell surface.     

Polarized cells, polar actions.

The recognition of polar bacterial organization is just emerging. The examples of polar localization given here are from a variety of bacterial species and concern a disparate array of cellular functions. A number of well-characterized instances of polar localization of bacterial proteins, including the chemoreceptor complex in both C. crescentus and E. coli, the maltose-binding protein in E. coli, the B. japonicum surface attachment proteins, and the actin tail of L. monocytogenes within a mammalian cell, involve proteins or protein complexes that facilitate bacterial interaction with the environment, either the extracellular milieux or that within a plant or mammalian host. The significance of this observation remains unclear. Polarity in bacteria poses many problems, including the necessity for a mechanism for asymmetrically distributing proteins as well as a mechanism by which polar localization is maintained. Large structures, such as a flagellum, are anchored at the pole by means of the basal body that traverses the peptidoglycan wall. But for proteins and small complexes, whether in the periplasm or the membrane, one must invoke a mechanism that prevents the diffusion of these proteins away from the cell pole. Perhaps the periplasmic proteins are retained at the pole by the presence of the periseptal annulus (35). The constraining features for membrane components are not known. For large aggregates, such as the clusters of MCP, CheA, and CheW complexes, perhaps the size of the aggregate alone prevents displacement. In most cases of cellular asymmetry, bacteria are able to discriminate between the new pole and the old pole and to utilize this information for localization specificity. The maturation of new pole to old pole appears to be a common theme as well. Given numerous examples reported thus far, we propose that bacterial polarity displays specific rules and is a more general phenomenon than has been previously recognized.     

Functional Analysis of a Rickettsial OmpA Homology Domain of Shigella flexneri IcsA

Shigella flexneri is a gram-negative bacterium that causes diarrhea and dysentery by invasion and spread through the colonic epithelium. Bacteria spread by assembling actin and other cytoskeletal proteins of the host into “actin tails” at the bacterial pole; actin tail assembly provides the force required to move bacteria through the cell cytoplasm and into adjacent cells. The 120-kDa S. flexneri outer membrane protein IcsA is essential for actin assembly. IcsA is anchored in the outer membrane by a carboxy-terminal domain (the β domain), such that the amino-terminal 706 amino acid residues (the α domain) are exposed on the exterior of the bacillus. The α domain is therefore likely to contain the domains that are important to interactions with host factors. We identify and characterize a domain of IcsA within the α domain that bears significant sequence similarity to two repeated domains of rickettsial OmpA, which has been implicated in rickettsial actin tail formation. Strains of S. flexneri and Escherichia coli that carry derivatives of IcsA containing deletions within this domain display loss of actin recruitment and increased accessibility to IcsA-specific antibody on the surface of intracytoplasmic bacteria. However, site-directed mutagenesis of charged residues within this domain results in actin assembly that is indistinguishable from that of the wild type, and in vitro competition of a polypeptide of this domain fused to glutathione S-transferase did not alter the motility of the wild-type construct. Taken together, our data suggest that the rickettsial homology domain of IcsA is required for the proper conformation of IcsA and that its disruption leads to loss of interactions of other IcsA domains within the amino terminus with host cytoskeletal proteins.     

Outer Membrane Protein A (OmpA): A New Player in Shigella flexneri Protrusion Formation and Inter-Cellular Spreading

Outer membrane protein A (OmpA) is a multifaceted predominant outer membrane protein of Escherichia coli and other Enterobacteriaceae whose role in the pathogenesis of various bacterial infections has recently been recognized. Here, the role of OmpA on the virulence of Shigella flexneri has been investigated. An ompA mutant of wild-type S. flexneri 5a strain M90T was constructed (strain HND92) and it was shown to be severely impaired in cell-to-cell spreading since it failed to plaque on HeLa cell monolayers. The lack of OmpA significantly reduced the levels of IcsA while the levels of cell associated and released IcsP-cleaved 95 kDa amino-terminal portion of the mature protein were similar. Nevertheless, the ompA mutant displayed IcsA exposed across the entire bacterial surface. Surprisingly, the ompA mutant produced proper F-actin comet tails, indicating that the aberrant IcsA exposition at bacterial lateral surface did not affect proper activation of actin-nucleating proteins, suggesting that the absence of OmpA likely unmasks mature or cell associated IcsA at bacterial lateral surface. Moreover, the ompA mutant was able to invade and to multiply within HeLa cell monolayers, although internalized bacteria were found to be entrapped within the host cell cytoplasm. We found that the ompA mutant produced significantly less protrusions than the wild-type strain, indicating that this defect could be responsible of its inability to plaque. Although we could not definitely rule out that the ompA mutation might exert pleiotropic effects on other S. flexneri genes, complementation of the ompA mutation with a recombinant plasmid carrying the S. flexneri ompA gene clearly indicated that a functional OmpA protein is required and sufficient for proper IcsA exposition, plaque and protrusion formation. Moreover, an independent ompA mutant was generated. Since we found that both mutants displayed identical virulence profile, these results further supported the findings presented in this study.     

Disruption of IcsP, the major Shigella protease that cleaves IcsA, accelerates actin-based motility

Shigella pathogenesis involves bacterial invasion of colonic epithelial cells and movement of bacteria through the cytoplasm and into adjacent cells by means of actin-based motility. The Shigella protein IcsA (VirG) is unipolar on the bacterial surface and is both necessary and sufficient for actin-based motility. IcsA is inserted into the outer membrane as a 120-kDa polypeptide that is subsequently slowly cleaved, thereby releasing the 95-kDa amino-terminal portion into the culture supernatant. IcsP, the major Shigella protease that cleaves IcsA, was identified and cloned. It has significant sequence similarity to the E. coli serine proteases, OmpP and OmpT. Disruption of icsP in serotype 2a S. flexneri leads to a marked reduction in IcsA cleavage, increased amounts of IcsA associated with the bacterium and altered distribution of IcsA on the bacterial surface. The icsP mutant displays significantly increased rates of actin-based motility, with a mean speed 27% faster than the wild-type strain; moreover, a significantly greater percentage of the icsP mutant moves in the cytoplasm. Yet, plaque formation on epithelial monolayers by the mutant was not altered detectably. These data suggest that IcsA, and not a host protein, is limiting in the rate of actin-based motility of wild-type serotype 2a S. flexneri .     

Molecular bases of epithelial cell invasion by Shigella flexneri

The pathogenesis of shigellosis is characterized by the capacity of the causative microorganism, Shigella, to invade the epithelial cells that compose the mucosal surface of the colon in humans. The invasive process encompasses several steps which can be summarized as follows: entry of bacteria into epithelial cells involves signalling pathways that elicit a macropinocitic event. Upon contact with the cell surface, S. flexneri activates a Mxi/Spa secretory apparatus encoded by two operons comprising about 25 genes located on a large virulence plasmid of 220 kb. Through this specialized secretory apparatus, Ipa invasins are secreted, two of which (IpaB, 62 kDa and IpaC, 42 kDa) form a complex which is itself able to activate entry via its interaction with the host cell membrane. Interaction of this molecular complex with the cell surface elicits major rearrangements of the host cell cytoskeleton, essentially the polymerization of actin filaments that form bundles supporting the membrane projections which achieve bacterial entry. Active recruitment of the protooncogene pp 60^c-src has been demonstrated at the entry site with consequent phosphorylation of cortactin. Also, the small GTPase Rho is controlling the cascade of signals that allows elongation of actin filaments from initial nucleation foci underneath the cell membrane. The regulatory signals involved as well as the proteins recruited indicate that Shigella induces the formation of an adherence plaque at the cell surface in order to achieve entry. Once intracellular, the bacterium lyses its phagocytic vacuole, escapes into the cytoplasm and starts moving the inducing polar, directed polymerization of actin on its surface, due to the expression of IcsA, a 120 kDa outer membrane protein, which is localized at one pole of the microorganism, following cleavage by SopA, a plasmid-encoded surface protease. In the context of polarized epithelial cells, bacteria then reach the intermediate junction and engage their components, particularly the cadherins, to form a protrusion which is actively internalized by the adjacent cell. Bacteria then lyse the two membranes, reach the cytoplasmic compartment again, and resume actin-driven movement.     

Phosphorylation of IcsA by cAMP-dependent protein kinase and its effect on intercellular spread of Shigella flexneri

Shigella flexneri, a Gram-negative bacillus belonging to the family Enterobacteriaceae, causes bacillary dysentery in humans by invading colonic epithelial cells. Processes by which epithelial cells, which are not professional phagocytes, may limit the spread of the invading microorganisms are poorly understood. This paper shows that IcsA (VirG), a 120kDa bacterial outer membrane protein responsible for intracellular and cell-to-cell spread through polymerization of actin, is a major substrate for phosphorylation by cyclic-dependent protein kinases. Site-directed mutagenesis of a sequence encoding phosphorylation consensus motif SSRRASS, located at residues 754–760, almost completely abolished the ability of this protein to be phosphorylated by protein kinase A. Such mutants expressed a ‘super Ics’ phenotype, characterized by an increased capacity to spread from cell-to-cell during the first three hours of infection in the HeLa cell infection assay. These data suggest that host-cell phosphorytation of key virulence proteins located on the bacterial surface may represent a significant host defence mechanism during the invasion process.     

Polar positional information in Escherichia coli spherical cells

Shigella surface protein IcsA and its cytoplasmic derivatives are localized to the old pole of rod-shaped cells when expressed in Escherichia coli. In spherical mreB cells, IcsA is targeted to ectopic sites and close to one extremity of actin-like MamK filament. To gain insight into the properties of the sites containing polar material, we studied the IcsA localization in spherical cells. GFP was exported into the periplasm via the Tat pathway and used as a periplasmic space marker. GFP displayed zonal fluorescence in both mreB and rodA-pbpA spherical E. coli cells, indicating an uneven periplasmic space. Deconvolution images revealed that the cytoplasmic IcsA fused to mCherry was localized outside or at the edge of the GFP zones. These observations strongly suggest that polar material is restricted to the positions where the periplasm possesses particular structural or biochemical properties.     

Contribution of the Periplasmic Chaperone Skp to Efficient Presentation of the Autotransporter IcsA on the Surface of Shigella flexneri

IcsA is an outer membrane protein in the autotransporter family that is required for Shigella flexneri pathogenesis. Following its secretion through the Sec translocon, IcsA is incorporated into the outer membrane in a process that depends on YaeT, a component of an outer membrane β-barrel insertion machinery. We investigated the role of the periplasmic chaperone Skp in IcsA maturation. Skp is required for the presentation of the mature amino terminus (alpha-domain) of IcsA on the bacterial surface and contributes to cell-to-cell spread of S. flexneri in cell culture. A mutation in skp does not prevent the insertion of the β-barrel into the outer membrane, suggesting that the primary role of Skp is the folding of the IcsA alpha-domain. In addition, the requirement for skp can be partially bypassed by disrupting icsP, an ortholog of Escherichia coli ompT, which encodes the protease that processes IcsA between the mature amino terminus and the β-barrel outer membrane anchor. These findings are consistent with a model in which Skp plays a critical role in the chaperoning of the alpha-domain of IcsA during transit through the periplasm.Type V secretion apparatuses (also called autotransporters) consist of an extensive class of large, outer membrane proteins of gram-negative bacteria, typically virulence factors, found in all subdivisions of proteobacteria (28). Although originally designated as “autotransporters” because they were thought to mediate their own insertion into and translocation across the outer membrane, more recent evidence suggests that autotransporter secretion and insertion requires the aid of accessory factors (21, 29). Secretion involves the insertion of the carboxy-terminal β-barrel domain into the outer membrane and translocation of the mature passenger (alpha) domain across the outer membrane (Fig. ​(Fig.1).1). Whether these two events occur sequentially or simultaneously is unclear. Analysis of crystal structures indicates that the carboxy-terminal end of the passenger domain is present within the central pore of the β-barrel (4, 27). Several studies provide evidence that at least some autotransporters are partially folded in the periplasm (7, 20), and one of these studies provides strong evidence that the passenger domain may be partially or fully incorporated into the β-barrel prior to incorporation of the mature protein into the outer membrane (20).Open in a separate windowFIG. 1.Schematic of the autotransporter IcsA. (A) Linear diagram showing the signal peptide (SP), alpha-domain (IcsA_53-757), and carboxy-terminal β-barrel domain. (B) IcsA in the outer membrane. The carboxy-terminal β-barrel is inserted into the outer membrane, and the mature amino-terminal alpha-domain is exposed on the bacterial surface. N′, mature amino terminus; C, carboxyl terminus; OM, outer membrane; arrow, proposed site of cleavage between residues 757 and 758 by IcsP.Shigella flexneri is a gram-negative human pathogen which, upon passage through the lower digestive tract, gains entry into colonic epithelial cells. Once S. flexneri is intracellular, it spreads to adjacent cells by secreting IcsA, a surface-associated autotransporter that is required for the polymerization of host cell actin on the bacterial surface. Actin polymerization occurs at a single pole of the bacterium and is required for infection of adjacent cells and disease pathogenesis (5, 24, 33).IcsA is encoded on a large virulence plasmid. The full-length protein is approximately 120 kDa and has three assigned functional and structural domains (25): an atypical Sec secretion signal (IcsA_1-52), the alpha-domain (IcsA_53-757), which is exposed on the bacterial surface and contains sequences that are required for actin polymerization, and the beta-domain (IcsA_758-1102), which forms a β-barrel structure in the outer membrane (Fig. ​(Fig.1A)1A) (21, 25). In vivo, a fraction of IcsA molecules are proteolytically processed at the junction between the alpha- and beta-domains by the protease IcsP (SopA), a protein which is also encoded on the virulence plasmid (14, 34). IcsA_53-757 is found in the supernatant of liquid cultures, while mature full-length IcsA (IcsA_53-1102), IcsA_758-1102 (14, 34), and some IcsA_53-757 (this work) remain cell associated. IcsA, like other autotransporters, is secreted at the bacterial pole (22), the site at which actin tail assembly occurs. As it is for other β-barrel-containing outer membrane proteins, insertion of IcsA and other autotransporters into the outer membrane requires the outer membrane insertase YaeT (BamA, Omp85) (21).Skp, DegP, and SurA are periplasmic chaperones that, like YaeT, appear to function in the targeting and/or insertion of outer membrane proteins (35). Evidence based on synthetic phenotypes suggests that during outer membrane protein insertion Skp and DegP act in one pathway and that SurA acts in a distinct but parallel pathway (35).We investigated the role of the periplasmic chaperone Skp in the folding and secretion of IcsA in S. flexneri. We found that in the absence of skp, IcsA is inefficiently presented on the surface of S. flexneri, leading to a cellular spread defect. Surprisingly, the protein was still efficiently cleaved by the outer membrane protease IcsP, as wild-type levels of IcsA_53-757 were detected in the culture supernatants. We found that introduction of the icsP mutation into the skp strain background led to an increase in the levels of full-length IcsA presented on the bacterial cell surface of the skp mutant, and we present models that could explain our results.     

The Shigella flexneri OmpA amino acid residues 188EVQ190 are essential for the interaction with the virulence factor PhoN2

Shigella flexneri is an intracellular pathogen that deploys an arsenal of virulence factors promoting host cell invasion, intracellular multiplication and intra- and inter-cellular dissemination. We have previously reported that the interaction between apyrase (PhoN2), a periplasmic ATP-diphosphohydrolase, and the C-terminal domain of the outer membrane (OM) protein OmpA is likely required for proper IcsA exposition at the old bacterial pole and thus for full virulence expression of Shigella flexneri (Scribano et al., 2014). OmpA, that is the major OM protein of Gram-negative bacteria, is a multifaceted protein that plays many different roles both in the OM structural integrity and in the virulence of several pathogens. Here, by using yeast two-hybrid technology and by constructing an in silico 3D model of OmpA from S. flexneri 5a strain M90T, we observed that the OmpA residues ₁₈₈EVQ₁₉₀ are likely essential for PhoN2-OmpA interaction. The ₁₈₈EVQ₁₉₀ amino acids are located within a flexible region of the OmpA protein that could represent a scaffold for protein-protein interaction.