Proteomics of beta2-microglobulin amyloid fibrils

Knowledge on the chemical structure of beta2-microglobulin in natural amyloid fibrils is quite limited because of the difficulty in obtaining tissue samples suitable for biochemical studies. We have reviewed the available information on the chemical modifications and we present new data of beta2-microglobulin extracted from non-osteotendinous tissues. beta2-microglobulin can accumulate in these compartments after long-term haemodialysis but rarely forms amyloid deposits. We confirm that truncation at the N-terminus is an event specific to beta2-microglobulin derived from fibrils but is not observed in the beta2-microglobulin from plasma or from the insoluble non-fibrillar material deposited in the heart and spleen. We also confirm the partial deamidation of Asn 17 and Asn 42, as well as the oxidation of Met 99 in fibrillar beta2-microglobulin. Other previously reported chemical modifications cannot be excluded, but should involve less than 1-2% of the intact molecule.     

Ultrasonication-induced amyloid fibril formation of beta2-microglobulin

To obtain insight into the mechanism of fibril formation, we examined the effects of ultrasonication, a strong agitator, on beta2-microglobulin (beta2-m), a protein responsible for dialysis-related amyloidosis. Upon sonication of an acid-unfolded beta2-m solution at pH 2.5, thioflavin T fluorescence increased markedly after a lag time of 1-2 h with a simultaneous increase of light scattering. Atomic force microscopy images showed the formation of a large number of short fibrils 3 nm in diameter. When the sonication-induced fibrils were used as seeds in the next seeding experiment at pH 2.5, a rapid and intense formation of long fibrils 3 nm in diameter was observed demonstrating seed-dependent fibril growth. We then examined the effects of sonication on the native beta2-m at neutral pH, conditions under which amyloid deposits occur in patients. In the presence of 0.5 mm sodium dodecyl sulfate, a model compound of potential trigger and stabilizer of amyloid fibrils in patients, a marked increase of thioflavin T fluorescence was observed after 1 day of sonication at pH 7.0. The products of sonication caused the accelerated fibril formation at pH 7.0. Atomic force microscopy images showed that the fibrils formed at pH 7.0 have a diameter of more than 7 nm, thicker than those prepared at pH 2.5. These results indicate that ultrasonication is one form of agitation triggering the formation of amyloid fibrils of beta2-m, producing fibrils adapted to the respective pH.     

A systematic investigation into the effect of protein destabilisation on beta 2-microglobulin amyloid formation

Beta-2-microglobulin (beta(2)m) has been shown to form amyloid fibrils with distinct morphologies under acidic conditions in vitro. Short, curved fibrils (<600 nm in length), form rapidly without a lag phase, with a maximum rate at pH 3.5. By contrast, fibrils with a long (approximately 1 microm), straight morphology are produced by incubation of the protein at pH< or =3.0. Both fibril types display Congo red birefringence, bind Thioflavin-T and have X-ray fibre diffraction patterns consistent with a cross-beta structure. In order to investigate the role of different partially folded states in generating fibrils of each type, and to probe the effect of protein stability on amyloid formation, we have undertaken a detailed mutagenesis study of beta(2)m. Thirteen variants containing point mutations in different regions of the native protein were created and their structure, stability and fibril forming propensities were investigated as a function of pH. By altering the stability of the native protein in this manner, we show that whilst destabilisation of the native state is important in the generation of amyloid fibrils, population of specific denatured states is a pre-requisite for amyloid formation from this protein. Moreover, we demonstrate that the formation of fibrils with different morphologies in vitro correlates with the relative population of different precursor states.     

Dissolution of beta2-microglobulin amyloid fibrils by dimethylsulfoxide

Increasing numbers of proteins have been found to aggregate into insoluble fibers, collectively referred to as amyloid fibrils. To address the conformational stability of amyloid fibrils, we studied the effects of dimethylsulfoxide (DMSO), 2,2,2-trifluoroethanol (TFE), and 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) on beta(2)-microglobulin amyloid fibrils by circular dichroism, thioflavin T fluorescence, light scattering, and electron microscopy. When measured by circular dichroism and thioflavin T fluorescence, HFIP, and TFE dissolved the fibrils, producing predominantly helical conformations. However, these alcohols did not dissolve the amyloid fibrils completely as monitored by light scattering and electron microscopy. On the other hand, DMSO completely dissolved the amyloid fibrils although a high concentration [i.e., 80% (v/v)] was required. These results are consistent with the important role of hydrogen bonds in stabilizing amyloid fibrils.     

Kinetically controlled thermal response of beta2-microglobulin amyloid fibrils

Calorimetric measurements were carried out using a differential scanning calorimeter in the temperature range from 10 to 120 degrees C for characterizing the thermal response of beta2-microglobulin amyloid fibrils. The thermograms of amyloid fibril solution showed a remarkably large decrease in heat capacity that was essentially released upon the thermal unfolding of the fibrils, in which the magnitude of negative heat capacity change was not explicable in terms of the current accessible surface area model of protein structural thermodynamics. The heat capacity-temperature curve of amyloid fibrils prior to the fibril unfolding exhibited an unusual dependence on the fibril concentration and the heating rate. Particularly, the heat needed to induce the thermal response was found to be linearly dependent on the heating rate, indicating that its thermal response is under a kinetic control and precluding the interpretation in terms of equilibrium thermodynamics. Furthermore, amyloid fibrils of amyloid beta peptides also exhibited a heating rate-dependent exothermic process before the fibril unfolding, indicating that the kinetically controlled thermal response may be a common phenomenon to amyloid fibrils. We suggest that the heating rate-dependent negative change in heat capacity is coupled to the association of amyloid fibrils with characteristic hydration pattern.     

Topological investigation of amyloid fibrils obtained from beta2-microglobulin

Amyloid fibrils of patients treated with regular hemodialysis essentially consists of beta2-microglobulin (beta2-m) and its truncated species DeltaN6beta2-m lacking six residues at the amino terminus. The truncated fragment has a more flexible three-dimensional structure and constitutes an excellent candidate for the analysis of a protein in the amyloidogenic conformation. The surface topology of synthetic fibrils obtained from intact beta2-m and truncated DeltaN6beta2-m was investigated by the limited proteolysis/mass spectrometry approach that appeared particularly suited to gain insights into the structure of beta2-m within the fibrillar polymer. The distribution of prefential proteolytic sites observed in both fibrils revealed that the central region of the protein, which had been easily cleaved in the full-length globular beta2-m, was fully protected in the fibrillar form. In addition, the amino- and carboxy-terminal regions of beta2-m became exposed to the solvent in the fibrils, whereas they were masked completely in the native protein. These data indicate that beta2-m molecules in the fibrils consist of an unaccessible core comprising residues 20-87 with the strands I and VIII being not constrained in the fibrillar polymer and exposed to the proteases. Moreover, proteolytic cleavages observed in vitro at Lys 6 and Lys 19 reproduce specific cleavages that have to occur in vivo to generate the truncated forms of beta2-m occurring in natural fibrils. On the basis of these data, a possible mechanism for fibril formation from native beta2-m is discussed and an explanation for the occurrence of truncated protein species in natural fibrils is given.     

Inhibition of beta2-microglobulin amyloid fibril formation by alpha2-macroglobulin

The relationship between various amyloidoses and chaperones is gathering attention. In patients with dialysis-related amyloidosis, α(2)-macroglobulin (α2M), an extracellular chaperone, forms a complex with β(2)-microglobulin (β2-m), a major component of amyloid fibrils, but the molecular mechanisms and biological implications of the complex formation remain unclear. Here, we found that α2M substoichiometrically inhibited the β2-m fibril formation at a neutral pH in the presence of SDS, a model for anionic lipids. Binding analysis showed that the binding affinity between α2M and β2-m in the presence of SDS was higher than that in the absence of SDS. Importantly, SDS dissociated tetrameric α2M into dimers with increased surface hydrophobicity. Western blot analysis revealed that both tetrameric and dimeric α2M interacted with SDS-denatured β2-m. At a physiologically relevant acidic pH and in the presence of heparin, α2M was also dissociated into dimers, and both tetrameric and dimeric α2M interacted with β2-m, resulting in the inhibition of fibril growth reaction. These results suggest that under conditions where native β2-m is denatured, tetrameric α2M is also converted to dimeric form with exposed hydrophobic surfaces to favor the hydrophobic interaction with denatured β2-m, thus dimeric α2M as well as tetrameric α2M may play an important role in controlling β2-m amyloid fibril formation.     

Seeding-dependent maturation of beta2-microglobulin amyloid fibrils at neutral pH

Beta2-microglobulin (beta2-m) is a major component of amyloid fibrils deposited in patients with dialysis-related amyloidosis. Recent studies have focused on the mechanism by which amyloid fibrils are formed under physiological conditions, which had been difficult to reproduce quantitatively. Yamamoto et al. (Yamamoto, S., Hasegawa, K., Yamaguchi, I., Tsutsumi, S., Kardos, J., Goto, Y., Gejyo, F. & Naiki, H. (2004) Biochemistry 43, 11075-11082) showed that a combination of seed fibrils prepared under acidic conditions and a low concentration of sodium dodecyl sulfate below its critical micelle concentration enabled extensive fibril formation at pH 7.0. Here, we found that repeated self-seeding at pH 7.0 with fibrils formed at the same pH causes a marked acceleration of growth, indicating the maturation of fibrils. The observed maturation can be simulated by assuming the existence of two types of fibrils with different growth rates. Importantly, some mutations of beta2-m or the addition of a low concentration of urea, both destabilizing the native conformation, were not enough to extend the fibrils at pH 7.0, and a low concentration of sodium dodecyl sulfate (i.e. 0.5 mM) was essential. Thus, even though the first stage fibrils in patients are unstable and require stabilizing factors to remain at neutral pH, they can adapt to a neutral pH with repeated self-seeding, implying a mechanism of development of amyloid deposition after a long latent period in patients.     

In vitro formation of amyloid fibrils from intact beta 2-microglobulin

Prompted by the identification of hemodialysis-associated amyloid protein as beta 2-microglobulin, we attempted to create in vitro amyloid fibrils from the native protein. Beta 2-microglobulin in PBS was slowly dialyzed free of salt and then concentrated. The residue showed Congophilia with green birefringence by light microscopy and polarization, and non-branching fibrils of indeterminate length, measuring 8 to 10 nm in diameter by electron microscopy, thus meeting the morphologic criteria for amyloid. The present study demonstrates the first successful in vitro creation of amyloid fibrils with intact precursor protein molecules and provides supporting evidence that hemodialysis-associated amyloid is constituted from beta 2-microglobulin.     

A new Tla region antigen Qa-11, similar to Qa-2 and associated with B-type beta 2-microglobulin

A new antigen, Qa-11, is detected as a 40,000 dalton band in the SDS-PAGE of immunoprecipitates of radiolabeled lymphocyte membrane preparations. In C57BL H-2 congenic strains, its presence is controlled by a gene in the Tla region. In strains with genetic background other than C57BL it is not expressed. Tests with recombinant inbred strains and with H-3 congenic strains show that, in addition to the Tla region, a gene linked to or identical with the beta 2-microglobulin-b-allele is required for the expression of Qa-11 as well. The mobility of the Qa-11 antigen in SDS-PAGE and in isoelectrofocusing is the same as that of Qa-2 antigen. The Cleveland peptide maps of Qa-2 and Qa-11 are identical as well. This finding, that the Tla region controlled Qa-11 antigen is structurally very similar to the Qa-2 antigen, contrasts with the fact that Tla region products do not react with anti-Qa-2 sera. This paradox could be explained by a separate Qa-11 region between Qa-2 and Tla. Alternatively, it is possible that the Qa-11 antigen is the result of the action of a modifying gene in the Tla region upon a Qa-2 gene product, or that the structural gene for Qa-11 is located in the Qa-2 region and a Tla region gene controls its expression.     

Failure of the reaction of beta2-microglobulin with staphylococcal protein A.

Because beta2-microglobulin is structurally similar to IgG, the reaction of beta2-microglobulin with Staphylococcal Protein A, which is known to react with the Fc region of IgG, was examined. 125I-beta2-microglobulin did not bind to Protein A. This may due to the difference in the amino acid sequence between beta2-microglobulin and the Fc region of IgG.     

Core and heterogeneity of beta2-microglobulin amyloid fibrils as revealed by H/D exchange

Dialysis-related amyloidosis, which occurs in the patients receiving a long-term hemodialysis with high frequency, accompanies the deposition of amyloid fibrils composed of beta(2)-microglobulin (beta2-m). In vitro, beta2-m forms two kinds of fibrous structures at acidic pH. One is a rigid "mature fibril", and the other is a flexible thin filament often called an "immature fibril". In addition, a 22-residue peptide (K3 peptide) corresponding to Ser20 to Lys41 of intact beta2-m forms rigid amyloid-like fibrils similar to mature fibrils. We compared the core of these three fibrils at single-residue resolution using a recently developed hydrogen/deuterium (H/D) exchange method with the dissolution of fibrils by dimethylsulfoxide (DMSO). The exchange time-course of these fibrils showed large deviations from a single exponential curve showing that, because of the supramolecular structures, the same residue exists in different environments from molecule to molecule, even in a single fibril. The exchange profiles revealed that the core of the immature fibril is restricted to a narrow region compared to that of the mature fibril. In contrast, all residues were protected from exchange in the K3 fibril, indicating that a whole region of the peptide is engaged in the beta-sheet network. These results suggest the mechanism of amyloid fibril formation, in which the core beta-sheet formed by a minimal sequence propagates to form a rigid and extensive beta-sheet network.     

Heat-triggered conversion of protofibrils into mature amyloid fibrils of beta2-microglobulin

Heat-triggered conversion of the salt-induced thin and flexible protofibrils into well-organized thick and straight mature amyloid fibrils was achieved with beta2-microglobulin, a protein responsible for dialysis-related amyloidosis. First, protofibrils that formed spontaneously at pH 2.5 in the presence of 0.5 M NaCl were aggregated by agitating the solution. Second, the aggregated protofibrils were heated in a cell of a differential scanning calorimeter (DSC). The DSC thermogram showed an exothermic transition with sigmoidal temperature dependence, resulting in a remarkably large decrease in the heat capacity of the solution. Third, on the basis of electron microscopy together with circular dichroism spectroscopy, seeding experiments, and a thioflavin T binding assay, the sigmoidal transition was found to represent the conversion of protofibrils into mature amyloid fibrils. Furthermore, DSC thermograms obtained at various heating rates revealed that the transition curve depends on the heating rate, implying that the effects of heat associated with the conversion to the mature fibrils are kinetically controlled, precluding an interpretation in terms of equilibrium thermodynamics. Taken together, these results highlight the importance of the change in heat capacity in addressing the biological significance of interactions between solvent water and amyloid fibrils and, moreover, in detecting the formation of amyloid fibrils.     

Conformation of amyloid fibrils of beta2-microglobulin probed by tryptophan mutagenesis

Beta2-microglobulin (beta2-m), a protein responsible for dialysis-related amyloidosis, adopts an immunoglobulin domain fold in its native state. Although beta2-m has Trp residues at positions 60 and 95, both are located near the surface of the domain. Hence, beta2-m does not have a conserved Trp common to other immunoglobulin domains, which is buried in close proximity to the disulfide bond. To study the structure of amyloid fibrils in relation to their native fold, we prepared a series of Trp mutants. Trp60 and Trp95 were both replaced with Phe, and a single Trp was introduced at various positions. Among various mutants, W39-beta2-m, in which a Trp was introduced at the position corresponding to the conserved Trp, exhibited a remarkable quenching of fluorescence in the native state, as observed for other immunoglobulin domains. An x-ray structural analysis revealed that W39-beta2-m assumes the native fold with Trp39 located in the vicinity of the disulfide bond. Comparison of the fluorescence spectra of various mutants for the native and fibrillar forms indicated that, while the Trp residues introduced in the middle of the beta2-m sequence tend to be buried in the fibrils, those located in the C-terminal region are more exposed. In addition, the fluorescence spectra of fibrils prepared at pH 2.5 and 7.0 revealed a large difference in the fluorescence intensity for W60-beta2-m, implying a major structural difference between them.     

Structural properties of an amyloid precursor of beta(2)-microglobulin

The population of one or more partially folded states has been proposed as a critical initial step in amyloid formation for several proteins. Here we use equilibrium denaturation measured by (1)H-(15)N NMR to determine the conformational properties of an amyloidogenic intermediate of human beta(2)-microglobulin (beta(2)m) formed at low pH. The data show that this amyloid precursor is a noncooperatively stabilized ensemble that retains stable structure in five of the seven beta-strands that comprise the native fold. The amyloid precursors of beta(2)m and transthyretin have similar properties despite having structurally unrelated native folds. The data offer a rationale as to why these proteins are both amyloidogenic at low pH and suggest that amyloidosis of these and other proteins may involve ordered assembly from a precursor with similar conformational features.     

A common beta-sheet architecture underlies in vitro and in vivo beta2-microglobulin amyloid fibrils

Misfolding and aggregation of normally soluble proteins into amyloid fibrils and their deposition and accumulation underlies a variety of clinically significant diseases. Fibrillar aggregates with amyloid-like properties can also be generated in vitro from pure proteins and peptides, including those not known to be associated with amyloidosis. Whereas biophysical studies of amyloid-like fibrils formed in vitro have provided important insights into the molecular mechanisms of amyloid generation and the structural properties of the fibrils formed, amyloidogenic proteins are typically exposed to mild or more extreme denaturing conditions to induce rapid fibril formation in vitro. Whether the structure of the resulting assemblies is representative of their natural in vivo counterparts, thus, remains a fundamental unresolved issue. Here we show using Fourier transform infrared spectroscopy that amyloid-like fibrils formed in vitro from natively folded or unfolded beta(2)-microglobulin (the protein associated with dialysis-related amyloidosis) adopt an identical beta-sheet architecture. The same beta-strand signature is observed whether fibril formation in vitro occurs spontaneously or from seeded reactions. Comparison of these spectra with those of amyloid fibrils extracted from patients with dialysis-related amyloidosis revealed an identical amide I' absorbance maximum, suggestive of a characteristic and conserved amyloid fold. Our results endorse the relevance of biophysical studies for the investigation of the molecular mechanisms of beta(2)-microglobulin fibrillogenesis, knowledge about which may inform understanding of the pathobiology of this protein.     

Conformational stability of amyloid fibrils of beta2-microglobulin probed by guanidine-hydrochloride-induced unfolding

Although the stability of globular proteins has been studied extensively, that of amyloid fibrils is scarcely characterized. Beta2-microglobulin (beta2-m) is a major component of the amyloid fibrils observed in patients with dialysis-related amyloidosis. We studied the effects of guanidine hydrochloride on the amyloid fibrils of beta2-m, revealing a cooperative unfolding transition similar to that of the native state. The stability of amyloid fibrils increased on the addition of ammonium sulfate, consistent with a role of hydrophobic interactions. The results indicate that the analysis of unfolding transition is useful to obtain insight into the structural stability of amyloid fibrils.     

Seeding-dependent propagation and maturation of beta2-microglobulin amyloid fibrils under high pressure

High hydrostatic pressure reversibly transforms the amyloid fibrils of beta2-microglobulin (beta2-m) into a more tightly packed, reorganized structure, which has provided insight into the polymorphic properties of amyloid fibrils. Here, to further investigate the molecular mechanism that controls fibril structure, seed-dependent fibril growth from an acid-unfolded monomeric form under high pressure was studied. At all pressures up to 400 MPa, the fibril growth could be approximated by a single-exponential kinetics, although pressure above 300 MPa decreased the growth rate significantly. The fibrils formed at high pressure were similar to the reorganized fibrils formed initially at ambient pressure and then pressurized, suggesting that the reorganized fibrils were formed directly at high pressure. A systematic investigation of the extension rate under various pressures indicated that the activation free energies for the original and reorganized fibrils are significantly different, suggesting that different amino acid contacts are involved in these two types of fibrils. On the other hand, for the seed-dependent extension reactions of both types of fibrils, the activation volume was much smaller than the change in reaction volume, implying that only small numbers of side-chain interactions are achieved in the transition state. Importantly, we observed a marked acceleration of fibril growth, i.e., maturation, on repeated self-seeding above 300 MPa, revealing the coexistence of another type of fibril with a similar structure but with an increased growth-rate under high pressure.