Device and programs for investigation of biological objects autofluorescence

A method of fluorescent sub-diffractional microscopy is proposed based on using object dyeing by special dye, which is able to bind to some object structures and initially not absorb light used for excitation of fluorescence. As a result of some processes small part of molecules is activated, that is converted to molecules able to absorb light and fluoresce sufficiently long to be registered by a sensitive video camera as separate spots covering tens of pixels of camera matrix. Then registered molecules must be photobleached or transformed to nonfluorescing state by other influence and new portion of molecules is activated. This circle of «activation» — «fluorescence excitation and registration» — «photobleaching» may be repeated thousands times. The accuracy of center spots determination may be up to 2 nm. A collection of all calculated centers of spots in all registered frames may be used for reconstruction of object image with resolution not limited by diffraction. A method of improving visibility of spots produced by single molecules in object having autofluorescence is described.     

Nano-fEM: Protein Localization Using Photo-activated Localization Microscopy and Electron Microscopy

Mapping the distribution of proteins is essential for understanding the function of proteins in a cell. Fluorescence microscopy is extensively used for protein localization, but subcellular context is often absent in fluorescence images. Immuno-electron microscopy, on the other hand, can localize proteins, but the technique is limited by a lack of compatible antibodies, poor preservation of morphology and because most antigens are not exposed to the specimen surface. Correlative approaches can acquire the fluorescence image from a whole cell first, either from immuno-fluorescence or genetically tagged proteins. The sample is then fixed and embedded for electron microscopy, and the images are correlated ^1-3. However, the low-resolution fluorescence image and the lack of fiducial markers preclude the precise localization of proteins. Alternatively, fluorescence imaging can be done after preserving the specimen in plastic. In this approach, the block is sectioned, and fluorescence images and electron micrographs of the same section are correlated ^4-7. However, the diffraction limit of light in the correlated image obscures the locations of individual molecules, and the fluorescence often extends beyond the boundary of the cell. Nano-resolution fluorescence electron microscopy (nano-fEM) is designed to localize proteins at nano-scale by imaging the same sections using photo-activated localization microscopy (PALM) and electron microscopy. PALM overcomes the diffraction limit by imaging individual fluorescent proteins and subsequently mapping the centroid of each fluorescent spot ^8-10. We outline the nano-fEM technique in five steps. First, the sample is fixed and embedded using conditions that preserve the fluorescence of tagged proteins. Second, the resin blocks are sectioned into ultrathin segments (70-80 nm) that are mounted on a cover glass. Third, fluorescence is imaged in these sections using the Zeiss PALM microscope. Fourth, electron dense structures are imaged in these same sections using a scanning electron microscope. Fifth, the fluorescence and electron micrographs are aligned using gold particles as fiducial markers. In summary, the subcellular localization of fluorescently tagged proteins can be determined at nanometer resolution in approximately one week.     

Differential evanescence nanometry: live-cell fluorescence measurements with 10-nm axial resolution on the plasma membrane

We present a method to resolve components within a diffraction-limited object by tracking simultaneously the average axial positions of two different sets of fluorescent molecules within it. The axial positions are then subtracted from each other to determine the separation of the two sets of fluorophores. This method follows the dynamic changes in the separation of the two sets of fluorophores with freely rotating dipoles using sequential acquisitions with total internal reflection and wide-field illumination, and it can be used to measure the formation of small structures on living cells. We have verified that we can achieve a resolution of 10 nm, and we have used the method to follow the location of clathrin and its adaptor AP-2 as they are recruited to a diffraction-limited coated pit during its assembly at the plasma membrane. We find a gradually increasing axial separation between the centroids of clathrin and AP-2 distribution, up to a final value of 30 nm just before coated-pit pinching and formation of the coated vesicle.     

Use of N-(7-dimethylamino-4-methylcoumarinyl)maleinimide for the detection of cysteine-containing peptides in peptide maps

A fluorescent reagent N-[7-dimethylamino-4-methylcoumarinyl]maleinimide (DACM), which reacts selectively with protein thiols, was used in the detection of cysteine-containing peptides in peptide maps. Direct staining of peptide maps of glutathione and tryptic digested α₁-antitrypsin resulted in the finding of one and four cysteine-containing spots, respectively. All other peptides could be visualized after the DACM staining, by the use of fluorescamine. Amino acid analysis of all peptides showed that only the DACM fluorescent spots contained cysteine residues.     

ProteomIQ blue, a potent post-stain for the visualization and subsequent mass spectrometry based identification of fluorescent stained proteins on 2D-gels

Manual spot excision for protein identification from fluorescent stained two-dimensional (2-D) gels is hard to accomplish. Here, we explore the use of ProteomIQ Blue as a post-stain method for the visualization of fluorescent stained/labeled proteins. We show that ProteomIQ Blue post-staining is almost as sensitive as staining with SYPRO Ruby or cyanine dyes alone. More than 90% of the protein spots that are stained with the fluorescent stains are still detectable with ProteomIQ Blue. In protein identification by mass spectrometry, ProteomIQ Blue post-stained spots provide high sensitivity and high protein sequence coverage of the peptide mass maps in both MALDI-TOF-MS and ESI-MS/MS analyses. In conclusion, post-staining of fluorescent stained gels with ProteomIQ Blue provides a facile and a powerful method to achieve quantitative protein analysis as well as protein identification in the same semianalytical gel without requiring sophisticated/expensive robotic equipment.     

Reproducibility,sensitivity and compatibility of the ProteoExtract® subcellular fractionation kit with saturation labeling of laser microdissected tissues

Laser microdissection (LMD), a method of isolating specific microscopic regions of interest from a tissue that has been sectioned, is increasingly being applied to study proteomics. LMD generally requires tissues to be fixed and histologically stained, which can interfere with protein recovery and subsequent analysis. We evaluated the compatibility and reproducibility of protein extractions from laser microdissected human colon mucosa using a subcellular fractionation kit (ProteoExtract^®, Calbiochem). Four protein fractions corresponding to cytosol (fraction 1), membrane/organelle (fraction 2), nucleus (fraction 3) and cytoskeleton (fraction 4) were extracted, saturation labeled with Cy5 and 5 μg separated by both acidic (pH 4–7) and basic (pH 6–11) 2‐DE. The histological stains and fixation required for LMD did not interfere with the accurate subcellular fractionation of proteins into their predicted fraction. The combination of subcellular fractionation and saturation CyDye labeling produced very well resolved, distinct protein spot maps by 2‐DE for each of the subcellular fractions, and the total number of protein spots consistently resolved between three independent extractions for each fraction was 893, 1128, 1245 and 1577 for fractions 1, 2, 3 and 4, respectively. Although significant carryover of protein did occur between fractions, this carryover was consistent between experiments, and very low inter‐experimental variation was observed. In summary, subcellular fractionation kits are very compatible with saturation labeling DIGE of LMD tissues and provide greater coverage of proteins from very small amounts of microdissected material.     

Expression and localisation of the pyrophosphate transporter, ANK, in murine kidney cells.

BACKGROUND/AIMS: Mutation of the pyrophosphate transporter, ANK, results in progressive arthritis in mice. ANK is expressed in non-skeletal tissues including kidney. The aim was therefore to investigate ANK location at the cellular and subcellular level in renal cells. METHODS: RT-PCR identified a murine cell-line, mIMCD3, expressing ANK. The intra-renal distribution of ANK was determined by immunohistochemistry and the subcellular distribution in mIMCD3 cells by transfection of an ANK-NT-GFP fusion protein. Furthermore, an inactivating mutation of murine ank, Glu440X, and a gain of function mutation, Met48Thr, were tested to determine whether membrane traffic contributed to a transport defect. RESULTS: ANK is expressed in cells of the cortical collecting duct, as assessed by colocalisation with aquaporin 2 and at the lateral and apical plasma membranes of mIMCD-3 epithelial cells, as assessed by colocalisation with wheat germ agglutinin lectin (WGA). ANK-NT-GFP was also present in endoplasmic reticulum, Golgi, acidic endosomes and mitochondria. mIMCD3 expression of Glu440X ANK-NT-GFP shows evidence of Golgi retention whereas Met48Thr ANK-NT-GFP is unaltered at the plasma membrane compared to wild type. CONCLUSION: The intra-renal and subcellular localisation of ANK is consistent with pyrophosphate export from collecting duct cells and supports a role for ANK in limiting intra-renal calcium-crystal formation.     

Suitability of different fluorescent powders for mass-marking the Chrysomelid, Diabrotica virgifera virgifera LeConte

Abstract:  The Western Corn Rootworm, Diabrotica virgifera virgifera LeConte (Col., Chrysomelidae), is an invasive alien pest of maize, Zea mays , in Europe. The suitability of 14 fluorescent powders for mass-marking the adults was studied in laboratory and in field cages. The visual discrimination between remaining spots of each colour on the beetles was investigated under ultraviolet (UV) light, as well as their retention time and the influences of those colours on the beetle survival and flight take-off response. The two best recognizable orange colours (i.e. of Radiant Colour and of Fiesta Colours Swada) were proposed for field experiments in first priority, followed by an orange and a yellow (both Magruder Colour), another yellow (Fiesta) and a pink (Radiant), as all did not affect beetle survival and flight take-off response and were recognizable under UV light for at least 10 days in the field. In contrast, the colours yellow and green (Radiant), red and blue (Magruder), yellow (Ciba Geigy) and pink (Fiesta) were unsuitable, because they either quickly disappeared from the beetles or adversely affected beetle survival or flight take-off response. For mass releases with differently marked beetles, only the use of a single orange colour together with a single yellow colour or the use of a pink colour together with a yellow colour can be used since few spots can clearly be discriminated from each other under UV light.     

Spatiotemporal image correlation spectroscopy (STICS) theory, verification, and application to protein velocity mapping in living CHO cells

We introduce a new extension of image correlation spectroscopy (ICS) and image cross-correlation spectroscopy (ICCS) that relies on complete analysis of both the temporal and spatial correlation lags for intensity fluctuations from a laser-scanning microscopy image series. This new approach allows measurement of both diffusion coefficients and velocity vectors (magnitude and direction) for fluorescently labeled membrane proteins in living cells through monitoring of the time evolution of the full space-time correlation function. By using filtering in Fourier space to remove frequencies associated with immobile components, we are able to measure the protein transport even in the presence of a large fraction (>90%) of immobile species. We present the background theory, computer simulations, and analysis of measurements on fluorescent microspheres to demonstrate proof of principle, capabilities, and limitations of the method. We demonstrate mapping of flow vectors for mixed samples containing fluorescent microspheres with different emission wavelengths using space time image cross-correlation. We also present results from two-photon laser-scanning microscopy studies of alpha-actinin/enhanced green fluorescent protein fusion constructs at the basal membrane of living CHO cells. Using space-time image correlation spectroscopy (STICS), we are able to measure protein fluxes with magnitudes of mum/min from retracting lamellar regions and protrusions for adherent cells. We also demonstrate the measurement of correlated directed flows (magnitudes of mum/min) and diffusion of interacting alpha5 integrin/enhanced cyan fluorescent protein and alpha-actinin/enhanced yellow fluorescent protein within living CHO cells. The STICS method permits us to generate complete transport maps of proteins within subregions of the basal membrane even if the protein concentration is too high to perform single particle tracking measurements.     

Evaluation of two-dimensional difference gel electrophoresis for protein profiling. Soluble proteins of the marine bacterium Pirellula sp. strain 1

Two-dimensional gel electrophoresis (2DE) is a central tool of proteome research, since it allows separation of complex protein mixtures at highest resolution. Quantification of gene expression at the protein level requires sensitive visualization of protein spots over a wide linear range. Two-dimensional difference gel electrophoresis (2D DIGE) is a new fluorescent technique for protein labeling in 2DE gels. Proteins are labeled prior to electrophoresis with fluorescent CyDyes trade mark and differently labeled samples are then co-separated on the same 2DE gel. We evaluated 2D DIGE for detection and quantification of proteins specific for glucose or N-acetylglucosamine metabolism in the marine bacterium Pirellula sp. strain 1. The experiment was based on 10 parallel 2DE gels. Detection and comparison of the protein spots were performed with the DeCyder trade mark software that uses an internal standard to quantify differences in protein abundance with high statistical confidence; 24 proteins differing in abundance by a factor of at least 1.5 (t test value <10(-9)) were identified. For comparison, another experiment was carried out with four SYPRO-Ruby-stained 2DE gels for each of the two growth conditions; image analysis was done with the ImageMaster trade mark 2D Elite software. Sensitivity of the CyDye fluors was evaluated by comparing Cy2, Cy3, Cy5, SYPRO Ruby, silver, and colloidal Coomassie staining. Three replicate gels, each loaded with 50 microg of protein, were run for each stain and the gels were analyzed with the ImageMaster software. Labeling with CyDyes allowed detection of almost as many protein spots as staining with silver or SYPRO Ruby.     

A green-emitting fluorescent protein from Galaxeidae coral and its monomeric version for use in fluorescent labeling

We have cloned a gene which encodes a fluorescent protein from the stony coral, Galaxeidae. This protein absorbs light maximally at 492 nm and emits green light at 505 nm, and as a result, we have designated it "Azami-Green (AG)." Despite sharing a similar spectral profile with enhanced green fluorescent protein (EGFP) (Clontech), the most popular variant of the Aequorea victoria green fluorescent protein, the identity between these two proteins at the amino acid level is only 5.7%. However, since AG has a high extinction coefficient, fluorescence quantum yield, and acid stability, it produces brighter green fluorescence in cultured cells than EGFP. Similar to other fluorescent proteins isolated from coral animals, AG forms a tight tetrameric complex, resulting in poor labeling of subcellular structures such as the plasma membrane and mitochondria. We have converted tetrameric AG into a monomeric form by the introduction of three amino acid substitutions, which were recently reported to be effective for monomerizing the red fluorescent protein from Discosoma coral (DsRed, Clontech). The resultant monomeric AG allowed for efficient fluorescent labeling of all of the subcellular structures and proteins tested while retaining nearly all of the brightness of the original tetrameric form. Thus, monomeric AG is a useful monomeric green-emitting fluorescent protein comparable to EGFP.     

Visual discrimination by the honeybee (Apis mellifera): the position of the common centre as the cue

Abstract. Bees can be trained to discriminate between a target with a 20° spot above a 10° spot of the same colour, and another target with the spots exchanged in position. Tests show that they do not remember the separate positions of spots of the same colour (including black) on the same target. The bees discriminate the difference in positions, in the vertical direction, of the common centres of the spots taken together, with or without green contrast.
Similar results are obtained in discriminations of a fixed T shape, each composed of two broad black bars subtending 8 by 24°, vs the same shape inverted. The trained bees fail to discriminate between the T shapes when the centroids are at the same level in the vertical direction. Moving the shapes in the horizontal direction in tests has less effect. Quite different results are obtained when the two bars of the T shape differ in colour. The bees discriminate the positions of the two colours separately, but they still fail to discriminate the shape of the T. The results can be explained by filters that detect the intensities within their fields, irrespective of shape, and weigh them according to their vertical angles from the horizontal midline. The normal function of these filters could be to detect the levels of objects relative to the horizon when the bee is in flight.     

Intravital Microscopy for Imaging Subcellular Structures in Live Mice Expressing Fluorescent Proteins

Here we describe a procedure to image subcellular structures in live rodents that is based on the use of confocal intravital microscopy. As a model organ, we use the salivary glands of live mice since they provide several advantages. First, they can be easily exposed to enable access to the optics, and stabilized to facilitate the reduction of the motion artifacts due to heartbeat and respiration. This significantly facilitates imaging and tracking small subcellular structures. Second, most of the cell populations of the salivary glands are accessible from the surface of the organ. This permits the use of confocal microscopy that has a higher spatial resolution than other techniques that have been used for in vivo imaging, such as two-photon microscopy. Finally, salivary glands can be easily manipulated pharmacologically and genetically, thus providing a robust system to investigate biological processes at a molecular level.In this study we focus on a protocol designed to follow the kinetics of the exocytosis of secretory granules in acinar cells and the dynamics of the apical plasma membrane where the secretory granules fuse upon stimulation of the beta-adrenergic receptors. Specifically, we used a transgenic mouse that co-expresses cytosolic GFP and a membrane-targeted peptide fused with the fluorescent protein tandem-Tomato. However, the procedures that we used to stabilize and image the salivary glands can be extended to other mouse models and coupled to other approaches to label in vivo cellular components, enabling the visualization of various subcellular structures, such as endosomes, lysosomes, mitochondria, and the actin cytoskeleton.     

HIV-1 Gag-RNA interaction occurs at a perinuclear/centrosomal site; analysis by confocal microscopy and FRET

The Gag polyprotein is the major structural protein of human immunodeficiency virus-1 (HIV-1) constituting the viral core. Between translation on cytoplasmic polysomes and assembly into viral particles at the plasma membrane, it specifically captures the RNA genome of the virus through binding RNA structural motifs (packaging signals -Psi) in the RNA. RNA is believed to be a structural facilitator of Gag assembly. Using a combined approach of immunofluorescence detection of Gag protein and in situ hybridisation detection of viral genomic RNA, we demonstrate that Gag protein colocalises early after expression with Psi+ RNA in the perinuclear region and also colocalises with centrioles. Colocalised RNA and protein subsequently traffic through the cytoplasm to the plasma membrane of the cell. Gag expressed from Psi- RNA diffuses throughout the cell. It is not found at centrioles and shows delayed cytoplasmic colocalisation with the RNA genome. RNA capture through Psi does not influence binding of Gag to microfilaments. Gag does not bind to tubulin during export. The presence of the packaging signal may coordinate capture of Psi+ RNA by Gag protein at the centrosome followed by their combined transport to the site of budding. HIV-1 Psi thus acts as a subcellular localisation signal as well as a high-affinity-binding site for Gag.     

Definitive localization of intracellular proteins: Novel approach using CRISPR-Cas9 genome editing,with glucose 6-phosphate dehydrogenase as a model

Studies to determine subcellular localization and translocation of proteins are important because subcellular localization of proteins affects every aspect of cellular function. Such studies frequently utilize mutagenesis to alter amino acid sequences hypothesized to constitute subcellular localization signals. These studies often utilize fluorescent protein tags to facilitate live cell imaging. These methods are excellent for studies of monomeric proteins, but for multimeric proteins, they are unable to rule out artifacts from native protein subunits already present in the cells. That is, native monomers might direct the localization of fluorescent proteins with their localization signals obliterated. We have developed a method for ruling out such artifacts, and we use glucose 6-phosphate dehydrogenase (G6PD) as a model to demonstrate the method's utility. Because G6PD is capable of homodimerization, we employed a novel approach to remove interference from native G6PD. We produced a G6PD knockout somatic (hepatic) cell line using CRISPR-Cas9 mediated genome engineering. Transfection of G6PD knockout cells with G6PD fluorescent mutant proteins demonstrated that the major subcellular localization sequences of G6PD are within the N-terminal portion of the protein. This approach sets a new gold standard for similar studies of subcellular localization signals in all homodimerization-capable proteins.     

Toward the virtual cell: Automated approaches to building models of subcellular organization "learned" from microscopy images

We review state-of-the-art computational methods for constructing, from image data, generative statistical models of cellular and nuclear shapes and the arrangement of subcellular structures and proteins within them. These automated approaches allow consistent analysis of images of cells for the purposes of learning the range of possible phenotypes, discriminating between them, and informing further investigation. Such models can also provide realistic geometry and initial protein locations to simulations in order to better understand cellular and subcellular processes. To determine the structures of cellular components and how proteins and other molecules are distributed among them, the generative modeling approach described here can be coupled with high throughput imaging technology to infer and represent subcellular organization from data with few a priori assumptions. We also discuss potential improvements to these methods and future directions for research.     

Molecular cartography of proteins: surface relief analysis of the calf eye lens protein gamma-crystallin

Methods of calculating the protein molecular surface and different map representations are described. The maps are obtained by projection of the space-filling molecular model on the surface of the ellipsoid of inertia. A new approach to surface analysis is proposed which is based on the use of three general maps: an identification map with all residues outlined, a surface relief map and a coloured map with a specific colour for each of the surface atoms. Superposition of these maps greatly simplifies molecular surface analysis. The usefulness of such an approach has been demonstrated by the study of the relief of the calf eye lens protein gamma-crystallin II. Protrusions of the relief have been shown to be occupied generally by charged residues, but in some cases by the hydrophobic ones. It is interesting to note that in crystal medium the protruding residues are involved, in the majority of cases, in intermolecular contacts. The protruding regions have been found to be pseudosymmetrical to each other in accordance with the two-fold rotation axis of the molecule. However, the colours of these regions, i.e. the atoms of the corresponding side chains, differ greatly.     

Fractionation profiling: a fast and versatile approach for mapping vesicle proteomes and protein–protein interactions

We developed “fractionation profiling,” a method for rapid proteomic analysis of membrane vesicles and protein particles. The approach combines quantitative proteomics with subcellular fractionation to generate signature protein abundance distribution profiles. Functionally associated groups of proteins are revealed through cluster analysis. To validate the method, we first profiled >3500 proteins from HeLa cells and identified known clathrin-coated vesicle proteins with >90% accuracy. We then profiled >2400 proteins from Drosophila S2 cells, and we report the first comprehensive insect clathrin-coated vesicle proteome. Of importance, the cluster analysis extends to all profiled proteins and thus identifies a diverse range of known and novel cytosolic and membrane-associated protein complexes. We show that it also allows the detailed compositional characterization of complexes, including the delineation of subcomplexes and subunit stoichiometry. Our predictions are presented in an interactive database. Fractionation profiling is a universal method for defining the clathrin-coated vesicle proteome and may be adapted for the analysis of other types of vesicles and particles. In addition, it provides a versatile tool for the rapid generation of large-scale protein interaction maps.     

Methods to map protein interactions in mammalian cells: different tools to address different questions

In the post-genome era, functional annotation of the predicted gene-sets will be one of the most important upcoming challenges. So-called interactome analysis positions a protein in its subcellular environment by mapping its interaction partners. Such interaction maps are essential for an accurate insight into protein function since many cellular processes are organised to operate in protein complexes. These assemblies have dynamic structures and can interact with each other, two properties which are often controlled by regulated protein expression and modification. Various methods exist to unravel protein interaction circuitries, which can be roughly divided into biochemical and genetic strategies. In this review we focus on the different strategies to study protein-protein interactions in living mammalian cells. Recently developed analytical and screening methods are also addressed.