Interchange of the active and silent S-layer protein genes of Lactobacillus acidophilus by inversion of the chromosomal slp segment

The most-dominant surface-exposed protein in many bacterial species is the S-protein. This protein crystallises into a regular monolayer on the outside surface of the bacteria: the S-layer. Lactobacillus acidophilus harbours two S-protein-encoding genes, slpA and slpB , only one of which ( slpA  ) is expressed. In this study, we show by polymerase chain reaction (PCR) analysis that slpA and slpB are located on a 6 kb chromosomal segment, in opposite orientations. In a small fraction of the bacterial population, this segment is inverted. The inversion leads to interchanging of the expressed and silent S-protein-encoding genes, and places the formerly silent gene behind the S-promoter which is located outside the inverted segment. A 26 bp sequence showing a high degree of similarity with the consensus sequence recognized by the Din family of invertases is present in the region where recombination occurs. Expression of the slpA gene seems to be favoured under laboratory growth conditions because 99.7% of the chromosomes of an L. acidophilus ATCC 4356 broth culture had the slpA gene present at the slp expression site.     

Horizontal transference of S-layer genes within Thermus thermophilus.

The S-layers of Thermus thermophilus HB27 and T. thermophilus HB8 are composed of protein units of 95 kDa (P95) and 100 kDa (P100), respectively. We have selected S-layer deletion mutants from both strains by complete replacement of the slpA gene. Mutants of the two strains showed similar defects in growth and morphology and overproduced an external cell envelope inside of which cells remained after division. However, the nature of this external layer is strain specific, being easily stained and regular in the HB8 delta slpA derivative and amorphous and poorly stained in the HB27 delta slpA strain. The addition of chromosomic DNA from T. thermophilus HB8 to growing cultures of T. thermophilus HB27 delta slpA led to the selection of a new strain, HB27C8, which expressed a functional S-layer composed of the P100 protein. Conversely, the addition of chromosomic DNA from T. thermophilus HB27 to growing cultures of T. thermophilus HB8 delta slpA allowed the isolation of strain HB8C27, which expressed a functional S-layer composed of the P95 protein. The driving force which selected the transference of the S-layer genes in these experiments was the difference in growth rates, one of the main factors leading to selection in natural environments.     

Genes and derived amino acid sequences of S-layer proteins from mesophilic,thermophilic, and extremely thermophilic methanococci

Cells of methanococci are covered by a single layer of protein subunits (S-layer) in hexagonal arrangement, which are directly exposed to the environment and which cannot be stabilized by cellular components. We have isolated S-layer proteins from cells of Methanococcus vannielii ( T(opt.)=37 degrees C), Methanococcus thermolithotrophicus ( T(opt.)=65 degrees C), and Methanococcus jannaschii ( T(opt.)=85 degrees C). The primary structure of the S-layer proteins was determined by sequencing the corresponding genes. According to the predicted amino acid sequence, the molecular masses of the S-layer proteins of the different methanococci are in a small range between 59,064 and 60,547 Da. Compared with its mesophilic counterparts, it is worth noting that in the S-layer protein of the extreme thermophile Mc. jannaschii the acidic amino acid Asp is predominant, the basic amino acid Lys occurs in higher amounts, and Cys and His are only present in this organism. Despite the differences in the growth optima and the predominance of some amino acids, the comparative total primary structure revealed a relatively high degree of identity (38%-45%) between the methanococci investigated. This observation indicates that the amino acid sequence of the S-layer proteins is significantly conserved from the mesophilic to the extremely thermophilic methanococci.     

Surface display of foreign epitopes on the Lactobacillus brevis S-layer

So far, the inability to establish viable Lactobacillus surface layer (S-layer) null mutants has hampered the biotechnological applications of Lactobacillus S-layers. In this study, we demonstrate the utilization of Lactobacillus brevis S-layer subunits (SlpA) for the surface display of foreign antigenic epitopes. With an inducible expression system, L. brevis strains producing chimeric S-layers were obtained after testing of four insertion sites in the slpA gene for poliovirus epitope VP1, that comprises 10 amino acids. The epitope insertion site allowing the best surface expression was used for the construction of an integration vector carrying the gene region encoding the c-Myc epitopes from the human c-myc proto-oncogene, which is composed of 11 amino acids. A gene replacement system was optimized for L. brevis and used for the replacement of the wild-type slpA gene with the slpA-c-myc construct. A uniform S-layer, displaying on its surface the desired antigen in all of the S-layer protein subunits, was obtained. The success of the gene replacement and expression of the uniform SlpA-c-Myc recombinant S-layer was confirmed by PCR, Southern blotting MALDI-TOF mass spectrometry, whole-cell enzyme-linked immunosorbent assay, and immunofluorescence microscopy. Furthermore, the integrity of the recombinant S-layer was studied by electron microscopy, which indicated that the S-layer lattice structure was not affected by the presence of c-Myc epitopes. To our knowledge, this is the first successful expression of foreign epitopes in every S-layer subunit of a Lactobacillus S-layer while still maintaining the S-layer lattice structure.     

A conserved motif in S-layer proteins is involved in peptidoglycan binding in Thermus thermophilus.

There is experimental evidence to suggest that the 100-kDa S-layer protein from Thermus thermophilus HB8 binds to the peptidoglycan cell wall. This property could be related to the presence of a region (SLH) of homology with other S-layer proteins and extracellular enzymes (A. Lupas, H. Engelhardt, J. Peters, U. Santarius, S. Volker, and W. Baumeister, J. Bacteriol. 176:1224-1233, 1994). By using specific monoclonal antibodies, we show that similar regions are present in different members of the Deinococcus-Thermus phylogenetic group. To analyze the role that the SLH domain plays in vivo and in vitro in T. thermophilus, we have obtained a mutant form (slpA.X) of the S-layer gene (slpA) in which the SLH domain was deleted. The slpA.X gene was inserted into the chromosome of the thermophile by gene replacement, resulting in a mutant which expressed a major membrane protein with the size expected from the construction (90 kDa). This protein was identified as the product of slpA.X by its differential reaction with monoclonal antibodies. Mutants expressing the SlpA.X protein grow as groups of cells, surrounded by a common external envelope of trigonal symmetry that contains the SlpA.X protein as a main component, thus showing the inability of the SLH-defective protein to attach to the underlying material in vivo. In addition, averaged images of SlpA.X-rich fractions showed a regular arrangement, identical to that built up by the wild-type (SlpA) protein in the absence of peptidoglycan. Finally, we demonstrate by Western blotting (immunoblotting) the direct role of the SLH domain in the binding of the S-layer of T. thermophilus HB8 to the peptidoglycan layer.     

The S-layer protein from Campylobacter rectus: sequence determination and function of the recombinant protein

The gene encoding the crystalline surface layer (S-layer) protein from Campylobacter rectus , designated slp , was sequenced and the recombinant gene product was expressed in Escherichia coli . The gene consisted of 4086 nucleotides encoding a protein with 1361 amino acids. The N-terminal amino acid sequence revealed that Slp did not contain a signal sequence, but that the initial methionine residue was processed. The deduced amino acid sequence displayed some common characteristic features of S-layer proteins previously reported. A homology search showed a high similarity to the Campylobacter fetus S-layer proteins, especially in their N-terminus. The C-terminal third of Slp exhibited homology with the RTX toxins from Gram-negative bacteria via the region including the glycine-rich repeats. The Slp protein had the same N-terminal sequence as a 104-kDa cytotoxin isolated from the culture supernatants of C. rectus . However, neither native nor recombinant Slp showed cytotoxicity against HL-60 cells or human peripheral white blood cells. These data support the idea that the N-terminus acts as an anchor to the cell surface components and that the C-terminus is involved in the assembly and/or transport of the protein.     

Importance of S-layer proteins in probiotic activity of Lactobacillus acidophilus M92

AIMS: To investigate the functional role of surface layer proteins (S-layer) in probiotic strain Lactobacillus acidophilus M92, especially its influence on adhesiveness to mouse ileal epithelial cells. METHODS AND RESULTS: Sodium dodecyl sulphate polyacrylamide gel electrophoresis of cell surface proteins revealed the presence of potential surface layer (S-layer) proteins, ca at 45 kDa in L. acidophilus M92. Southern blot with pBK1 plasmid, containing slpA gene, gave a positive signal, suggesting that L. acidophilus M92 has a slpA gene coding for the S-layer proteins. S-layer proteins of this strain are present during all phases of growth. The S-layer proteins appeared when cells treated with 5 mol l(-1) LiCl were allowed to grow again. Removal of the S-layer proteins reduced adhesion of L. acidophilus M92 to mouse ileal epithelial cells. Furthermore, the viability of cells without S-layer were reduced in simulated gastric juice at low pH range (2, 2.5, 3) and simulated pancreatic juice with bile salts (1.5 and 3 g l(-1)). S-layer proteins of L. acidophilus M92 were resistant to pepsin and pancreatin, in contrast, the treatment with proteinase K led to a significant proteolysis of the S-layer proteins. CONCLUSIONS: These results demonstrated functional role of S-layer; it is responsible for adhesiveness of Lactobacillus acidophilus M92 to mouse ileal epithelial cells and has a protective role for this strain. SIGNIFICANCE AND IMPACT OF THE STUDY: S-layer proteins have an important role in the establishment of probiotic strain Lactobacillus acidophilus M92 in the gastrointestinal tract.     

Comparative studies of S-layer proteins from Bacillus stearothermophilus strains expressed during growth in continuous culture under oxygen-limited and non-oxygen-limited conditions.

The specific properties of S-layer proteins from three different Bacillus stearothermophilus strains revealing oblique, square, or hexagonal lattice symmetry were preserved during growth in continuous culture on complex medium only under oxygen-limited conditions in which glucose was used as the sole carbon source. When oxygen limitation was relieved, amino acids became metabolized, cell density increased, and different S-layer proteins from wild-type strains became rapidly replaced by a new common type of S-layer protein with an apparent subunit molecular weight of 97,000 which assembled into an identical oblique (p2) lattice type. During switching from wild-type strains to variants, patches of the S-layer lattices characteristics for wild-type strains, granular regions, and areas with oblique lattice symmetry could be observed on the surface of individual cells from all organisms. The granular regions apparently consisted of mixtures of the S-layer proteins from the wild-type strains and the newly synthesized p2 S-layer proteins from the variants. S-layer proteins from wild-type strains possessed identical N-terminal regions but led to quite different cleavage products upon peptide mapping, indicating that they are encoded by different genes. Chemical analysis including N-terminal sequencing and peptide mapping showed that the oblique S-layer lattices synthesized under increased oxygen supply were composed of identical protein species.     

S-layer protein of Lactobacillus acidophilus ATCC 4356: purification, expression in Escherichia coli, and nucleotide sequence of the corresponding gene.

The cell surfaces of several Lactobacillus species are covered by a regular layer composed of a single species of protein, the S-protein. The 43-kDa S-protein of the neotype strain Lactobacillus acidophilus ATCC 4356, which originated from the pharynx of a human, was purified. Antibodies generated against purified S-protein were used to screen a lambda library containing chromosomal L. acidophilus ATCC 4356 DNA. Several phages showing expression of this S-protein in Escherichia coli were isolated. A 4.0-kb DNA fragment of one of those phages hybridized to a probe derived from an internal tryptic fragment of the S-protein. The slpA gene, coding for the surface layer protein, was located entirely on the 4.0-kb fragment as shown by deletion analysis. The nucleotide sequence of the slpA gene was determined and appeared to encode a protein of 444 amino acids. The first 24 amino acids resembled a putative secretion signal, giving rise to a mature S-protein of 420 amino acids (44.2 kDa). The predicted isoelectric point of 9.4 is remarkably high for an S-protein but is in agreement with the data obtained during purification. The expression of the entire S-protein or of large, C-terminally truncated S-proteins is unstable in E. coli.     

Molecular cloning of the S-layer protein gene of Campylobacter rectus ATCC 33238

Abstract A genomic DNA library of Campylobacter rectus (Wolinella recta) ATCC 33238 was constructed using bacteriophage lambda EMBL3 as a vector. One clone expressing the S-layer protein was identified immunologically with the antiserum to the S-layer protein of C. rectus ATCC 33238. Western immunoblotting using monoclonal antibodies directed against the S-layer protein showed a single blot of recombinant protein at 150 kDa, suggesting that this clone contained the entire coding region of the S-layer protein gene. Additionally, the S-layer protein gene was subcloned into plasmid vector pUC18. Southern hybridization revealed that the S-layer protein gene was present on the chromosome of C. rectus as a single-copy gene, and that there were minor heterogeneities among the S-layer protein genes of clinical isolates. Moreover, a spontaneous stable mutant strain, which has no S-layer expression, also conserved the full-length gene of the S-layer protein.     

Molecular characterization of the S-layer gene,sbpA, of Bacillus sphaericus CCM 2177 and production of a functional S-layer fusion protein with the ability to recrystallize in a defined orientation while presenting the fused allergen

The nucleotide sequence encoding the crystalline bacterial cell surface (S-layer) protein SbpA of Bacillus sphaericus CCM 2177 was determined by a PCR-based technique using four overlapping fragments. The entire sbpA sequence indicated one open reading frame of 3,804 bp encoding a protein of 1,268 amino acids with a theoretical molecular mass of 132,062 Da and a calculated isoelectric point of 4.69. The N-terminal part of SbpA, which is involved in anchoring the S-layer subunits via a distinct type of secondary cell wall polymer to the rigid cell wall layer, comprises three S-layer-homologous motifs. For screening of amino acid positions located on the outer surface of the square S-layer lattice, the sequence encoding Strep-tag I, showing affinity to streptavidin, was linked to the 5' end of the sequence encoding the recombinant S-layer protein (rSbpA) or a C-terminally truncated form (rSbpA(31-1068)). The deletion of 200 C-terminal amino acids did not interfere with the self-assembly properties of the S-layer protein but significantly increased the accessibility of Strep-tag I. Thus, the sequence encoding the major birch pollen allergen (Bet v1) was fused via a short linker to the sequence encoding the C-terminally truncated form rSpbA(31-1068). Labeling of the square S-layer lattice formed by recrystallization of rSbpA(31-1068)/Bet v1 on peptidoglycan-containing sacculi with a Bet v1-specific monoclonal mouse antibody demonstrated the functionality of the fused protein sequence and its location on the outer surface of the S-layer lattice. The specific interactions between the N-terminal part of SbpA and the secondary cell wall polymer will be exploited for an oriented binding of the S-layer fusion protein on solid supports to generate regularly structured functional protein lattices.     

Sequence of the S-layer gene of Thermus thermophilus HB8 and functionality of its promoter in Escherichia coli.

The nucleotide sequence of the slpA gene, which is responsible for the synthesis of the S-layer protein of Thermus thermophilus HB8, is described. This gene is transcribed as a unit in which the coding region is preceded by a 127-base-long leader mRNA sequence. The promoter region is also recognized by the RNA polymerase of Escherichia coli because of the presence of homologous -35 and -10 boxes. Homologies with other promoters from Thermus spp. are also presented.     

Characterization and scope of S-layer protein O-glycosylation in Tannerella forsythia

Cell surface glycosylation is an important element in defining the life of pathogenic bacteria. Tannerella forsythia is a Gram-negative, anaerobic periodontal pathogen inhabiting the subgingival plaque biofilms. It is completely covered by a two-dimensional crystalline surface layer (S-layer) composed of two glycoproteins. Although the S-layer has previously been shown to delay the bacterium's recognition by the innate immune system, we characterize here the S-layer protein O-glycosylation as a potential virulence factor. The T. forsythia S-layer glycan was elucidated by a combination of electrospray ionization-tandem mass spectrometry and nuclear magnetic resonance spectroscopy as an oligosaccharide with the structure 4-Me-β-ManpNAcCONH(2)-(1→3)-[Pse5Am7Gc-(2→4)-]-β-ManpNAcA-(1→4)-[4-Me-α-Galp-(1→2)-]-α-Fucp-(1→4)-[-α-Xylp-(1→3)-]-β-GlcpA-(1→3)-[-β-Digp-(1→2)-]-α-Galp, which is O-glycosidically linked to distinct serine and threonine residues within the three-amino acid motif (D)(S/T)(A/I/L/M/T/V) on either S-layer protein. This S-layer glycan obviously impacts the life style of T. forsythia because increased biofilm formation of an UDP-N-acetylmannosaminuronic acid dehydrogenase mutant can be correlated with the presence of truncated S-layer glycans. We found that several other proteins of T. forsythia are modified with that specific oligosaccharide. Proteomics identified two of them as being among previously classified antigenic outer membrane proteins that are up-regulated under biofilm conditions, in addition to two predicted antigenic lipoproteins. Theoretical analysis of the S-layer O-glycosylation of T. forsythia indicates the involvement of a 6.8-kb gene locus that is conserved among different bacteria from the Bacteroidetes phylum. Together, these findings reveal the presence of a protein O-glycosylation system in T. forsythia that is essential for creating a rich glycoproteome pinpointing a possible relevance for the virulence of this bacterium.     

Characterization of the collagen-binding S-layer protein CbsA of Lactobacillus crispatus

The cbsA gene of Lactobacillus crispatus strain JCM 5810, encoding a protein that mediates adhesiveness to collagens, was characterized and expressed in Escherichia coli. The cbsA open reading frame encoded a signal sequence of 30 amino acids and a mature polypeptide of 410 amino acids with typical features of a bacterial S-layer protein. The cbsA gene product was expressed as a His tag fusion protein, purified by affinity chromatography, and shown to bind solubilized as well as immobilized type I and IV collagens. Three other Lactobacillus S-layer proteins, SlpA, CbsB, and SlpnB, bound collagens only weakly, and sequence comparisons of CbsA with these S-layer proteins were used to select sites in cbsA where deletions and mutations were introduced. In addition, hybrid S-layer proteins that contained the N or the C terminus from CbsA, SlpA, or SlpnB as well as N- and C-terminally truncated peptides from CbsA were constructed by gene fusion. Analysis of these molecules revealed the major collagen-binding region within the N-terminal 287 residues and a weaker type I collagen-binding region in the C terminus of the CbsA molecule. The mutated or hybrid CbsA molecules and peptides that failed to polymerize into a periodic S-layer did not bind collagens, suggesting that the crystal structure with a regular array is optimal for expression of collagen binding by CbsA. Strain JCM 5810 was found to contain another S-layer gene termed cbsB that was 44% identical in sequence to cbsA. RNA analysis showed that cbsA, but not cbsB, was transcribed under laboratory conditions. S-layer-protein-expressing cells of strain JCM 5810 adhered to collagen-containing regions in the chicken colon, suggesting that CbsA-mediated collagen binding represents a true tissue adherence property of L. crispatus.     

Serratia marcescens S-layer protein is secreted extracellularly via an ATP-binding cassette exporter, the Lip system

The Serratia marcescens Lip exporter belonging to the ATP-binding cassette (ABC) exporter is known to be involved in signal peptide-independent extracellular secretion of a lipase and a metalloprotease. Although the genes of secretory proteins and their ABC exporters are usually all reported to be linked in several Gram-negative bacteria, neither the lipase nor the protease gene is located close to the Lip exporter genes, lipBCD . A gene ( slaA ) located upstream of the lipBCD genes was cloned, revealing that it encodes a polypeptide of 100 kDa and is partially similar to the Caulobacter crescentus paracrystalline cell surface layer (S-layer) protein. The Lip exporter-deficient mutants of S . marcescens failed to secrete the SlaA protein. Electron micrography demonstrated the cell surface layer of S . marcescens . The S-layer protein was secreted to the cultured media in Escherichia coli cells carrying the Lip exporter. Three ABC exporters, Prt, Has and Hly systems, could not allow the S-layer secretion, indicating that the S . marcescens S-layer protein is strictly recognized by the Lip system. This is the first report concerning secretion of an S-layer protein via its own secretion system.