Enhanced mismatch selectivity of T4 DNA ligase far above the probe: Target duplex dissociation temperature

T4 DNA ligase is a widely used ligase in many applications; yet in single nucleotide polymorphism analysis, it has been found generally lacking owing to its tendency to ligate mismatches quite efficiently. To address this lack of selectivity, we explored the effect of temperature on the selectivity of the ligase in discriminating single base pair mismatches at the 3′‐terminus of the ligating strand using short ligation probes (9‐mers). Remarkably, we observe outstanding selectivities when the assay temperature is increased to 7 °C to 13 °C above the dissociation temperature of the matched probe:target duplexes using commercially available enzyme at low concentration. Higher enzyme concentration shifts the temperature range to 13 °C to 19 °C above the probe:target dissociation temperatures. Finally, substituting the 5′‐phosphate terminus with an abasic nucleotide decreases the optimal temperature range to 7 °C to 10 °C above the matched probe:target duplex. We compare the temperature dependence of the T4 DNA ligase catalyzed ligation and a nonenzymatic ligation system to contrast the origin of their modes of selectivity. For the latter, temperatures above the probe:target duplex dissociation lead to lower ligation conversions even for the perfect matched system. This difference between the two ligation systems reveals the uniqueness of the T4 DNA ligase's ability to maintain excellent ligation yields for the matched system at elevated temperatures. Although our observations are consistent with previous mechanistic work on T4 DNA ligase, by mapping out the temperature dependence for different ligase concentrations and probe modifications, we identify simple strategies for introducing greater selectivity into SNP discrimination based on ligation yields.     

Fidelity of enzymatic ligation for DNA computing.

We describe a convenient assay for rapid qualitative evaluation of hybridization/ligation fidelity. The approach uses randomized probe strands of DNA and restriction enzyme digestion after amplification of reaction products by the polymerase chain reaction (PCR). We report ligation efficiencies and fidelities of two DNA ligases, T4 DNA ligase and Thermus aquaticus (Taq) DNA ligase, over a range of temperatures.     

Plant enzymes but not Agrobacterium VirD2 mediate T-DNA ligation in vitro

Agrobacterium tumefaciens, a gram-negative soil bacterium, transfers DNA to many plant species. In the plant cell, the transferred DNA (T-DNA) is integrated into the genome. An in vitro ligation-integration assay has been designed to investigate the mechanism of T-DNA ligation and the factors involved in this process. The VirD2 protein, which is produced in Agrobacterium and is covalently attached to T-DNA, did not, under our assay conditions, ligate T-DNA to a model target sequence in vitro. We tested whether plant extracts could ligate T-DNA to target oligonucleotides in our test system. The in vitro ligation-integration reaction did indeed take place in the presence of plant extracts. This reaction was inhibited by dTTP, indicating involvement of a plant DNA ligase. We found that prokaryotic DNA ligases could substitute for plant extracts in this reaction. Ligation of the VirD2-bound oligonucleotide to the target sequence mediated by T4 DNA ligase was less efficient than ligation of a free oligonucleotide to the target. T-DNA ligation mediated by a plant enzyme(s) or T4 DNA ligase requires ATP.     

RNA-templated DNA ligation for transcript analysis

Ligase-mediated gene detection has proven valuable for detection and precise distinction of DNA sequence variants. We have recently shown that T4 DNA ligase can also be used to distinguish single nucleotide variants of RNA sequences. Here we describe parameters that influence RNA-templated DNA ligation by T4 DNA ligase. The reaction proceeds much more slowly, requiring more enzyme, compared to ligation of the same oligonucleotides hybridized to the corresponding DNA sequence. The reaction is inhibited at high concentrations of ATP and NaCl and both magnesium and manganese ions can support the reaction. We define reaction conditions where 80% of RNA target molecules can template a diagnostic ligation reaction. Ligase-mediated RNA detection should provide a useful mechanism for sensitive and accurate detection and distinction of RNA sequence variants.     

Characterization of bacteriophage T3 DNA ligase

DNA ligases of bacteriophage T4 and T7 have been widely used in molecular biology for decades, but little is known about bacteriophage T3 DNA ligase. Here is the first report on the cloning, expression and biochemical characterization of bacteriophage T3 DNA ligase. The polyhistidine-tagged recombinant T3 DNA ligase was shown to be an ATP-dependent enzyme. The enzymatic activity was not affected by high concentration of monovalent cations up to 1 M, whereas 2 mM ATP could inhibit its activity by 50%. Under optimal conditions (pH 8.0, 0.5 mM ATP, 5 mM DTT, 1 mM Mg(2+) and 300 mM Na(+)), 1 fmol of T3 DNA ligase could achieve 90% ligation of 450 fmol of cohesive dsDNA fragments in 30 min. T3 DNA ligase was shown to be over 5-fold more efficient than T4 DNA ligase for ligation of cohesive DNA fragments, but less active for blunt-ended DNA fragments. Phylogenetic analysis showed that T3 DNA ligase is more closely related to T7 DNA ligase than to T4 DNA ligase.     

The α-thio and/or β-γ-hypophosphate analogs of ATP as cofactors of T4 DNA ligase

T4 DNA ligase is one of the most commonly used enzymes for in vitro molecular research and a useful model for testing the ligation mechanism of ATP-dependent DNA ligation. To better understand the influence of phosphate group modifications in the ligation process, a series of ATP analogs were tested as cofactors. P-diastereomers of newly developed β,γ-hypo-ATPαS (thio) and β,γ-hypo-ATP (oxo) were synthesized and their activity was compared to ATPαS and their natural precursors. The evaluation of presented ATP analogs revealed the importance of the α-phosphate stereogenic center in ATPαS for the T4 DNA ligase activity and sheds new light on the interaction between ATP-dependent DNA ligases and cofactors.     

Template-independent ligation of single-stranded DNA by T4 DNA ligase

T4 DNA ligase is one of the workhorses of molecular biology and used in various biotechnological applications. Here we report that this ligase, unlike Escherichia coli DNA ligase, Taq DNA ligase and Ampligase, is able to join the ends of single-stranded DNA in the absence of any duplex DNA structure at the ligation site. Such nontemplated ligation of DNA oligomers catalyzed by T4 DNA ligase occurs with a very low yield, as assessed by quantitative competitive PCR, between 10(-6) and 10(-4) at oligonucleotide concentrations in the range 0.1-10 nm, and thus is insignificant in many molecular biological applications of T4 DNA ligase. However, this side reaction may be of paramount importance for diagnostic detection methods that rely on template-dependent or target-dependent DNA probe ligation in combination with amplification techniques, such as PCR or rolling-circle amplification, because it can lead to nonspecific background signals or false positives. Comparison of ligation yields obtained with substrates differing in their strandedness at the terminal segments involved in ligation shows that an acceptor duplex DNA segment bearing a 3'-hydroxy end, but lacking a 5'-phosphate end, is sufficient to play a role as a cofactor in blunt-end ligation.     

Efficient DNA ligation in DNA–RNA hybrid helices by Chlorella virus DNA ligase

Single-stranded DNA molecules (ssDNA) annealed to an RNA splint are notoriously poor substrates for DNA ligases. Herein we report the unexpectedly efficient ligation of RNA-splinted DNA by Chlorella virus DNA ligase (PBCV-1 DNA ligase). PBCV-1 DNA ligase ligated ssDNA splinted by RNA with k_cat ≈ 8 x 10⁻³ s⁻¹ and K_M < 1 nM at 25°C under conditions where T4 DNA ligase produced only 5′-adenylylated DNA with a 20-fold lower k_cat and a K_M ≈ 300 nM. The rate of ligation increased with addition of Mn²⁺, but was strongly inhibited by concentrations of NaCl >100 mM. Abortive adenylylation was suppressed at low ATP concentrations (<100 µM) and pH >8, leading to increased product yields. The ligation reaction was rapid for a broad range of substrate sequences, but was relatively slower for substrates with a 5′-phosphorylated dC or dG residue on the 3′ side of the ligation junction. Nevertheless, PBCV-1 DNA ligase ligated all sequences tested with 10-fold less enzyme and 15-fold shorter incubation times than required when using T4 DNA ligase. Furthermore, this ligase was used in a ligation-based detection assay system to show increased sensitivity over T4 DNA ligase in the specific detection of a target mRNA.     

Activity-based in vitro selection of T4 DNA ligase

Recent in vitro methodologies for selection and directed evolution of proteins have concentrated not only on proteins with affinity such as single-chain antibody but also on enzymes. We developed a display technology for selection of T4 DNA ligase on ribosome because an in vitro selection method for DNA ligase had never been developed. The 3' end of mRNA encoding the gene of active or inactive T4 DNA ligase-spacer peptide fusion protein was hybridized to dsDNA fragments with cohesive ends, the substrate of T4 DNA ligase. After in vitro translation of the mRNA-dsDNA complex in a rabbit reticulocyte system, a mRNA-dsDNA-ribosome-ligase complex was produced. T4 DNA ligase enzyme displayed on a ribosome, through addition of a spacer peptide, is able to react with dsDNA in the complex. The complex expressing active ligase was biotinylated by ligation with another biotinylated dsDNA probe and selected with streptavidin-coated magnetic beads. We effectively selected active T4 DNA ligase from a small amount of protein. The gene of the active T4 DNA ligase was enriched 40 times from a mixture of active and inactive genes using this selection strategy. This ribosomal display strategy may have high potential to be useful for selection of other enzymes associated with DNA.     

Optimization of conditions for the in vitro formation of hybrid DNA molecules by DNA ligase.

Conditions for the ligation with T4 induced DNA ligase of two DNA molecules via their complementary sticky ends have been established which lead preferentially to the formation of hybrid molecules. This is demonstrated with two combinations of parent molecules varying greatly in their relative molecular weights. In one case the intact hybrid molecule could be directly isolated. In addition a DNA dependent quantitative electrophoretic assay for DNA ligase activity is described which does not need a radioactively labeled substrate. The ligation procedure has been shown to be useful in molecular cloning experiments.     

Cloning and expression of a new bacteriophage (SHPh) DNA ligase isolated from sewage

During the last 50 years, major advances in molecular biology and biotechnology have been attributed to the discovery of enzymes that allow molecular cloning of important genes. One of these enzymes that has been widely acknowledged for its role in the development of biotechnology is the T4 DNA ligase. This enzyme joins the break in the DNA backbone structure by creating a phosphodiester bond between 5′ PO₄ and 3′ OH ends, in an ATP dependent multi-step reaction, thus allowing the ligation of related and foreign DNA sequences. Due to its role in modern DNA recombinant technology, there is a high demand on DNA ligase to allow the ligation of target DNA inserts into a chosen vector as part of DNA cloning technology. To closely look at ligase sequence diversity, a bacteriophage that infects DH5α (commercial lab strain of Escherichia coli) was isolated from sewage system in Hebron, Palestine. The DNA ligase gene of this phage was cloned and its sequence was compared to the NCBI database. The new bacteriophage ligase, named (South Hebron Phage, SHPh) DNA ligase, shows homology to T even bacteriophage DNA ligases posted in the NCBI database with 35 nucleotide differences, an indication of existed diversity among T even DNA ligation enzymes that can be used as markers in phage classification.     

XLF-Cernunnos promotes DNA ligase IV–XRCC4 re-adenylation following ligation

XLF-Cernunnos (XLF) is a component of the DNA ligase IV–XRCC4 (LX) complex, which functions during DNA non-homologous end joining (NHEJ). Here, we use biochemical and cellular approaches to probe the impact of XLF on LX activities. We show that XLF stimulates adenylation of LX complexes de-adenylated by pyrophosphate or following LX decharging during ligation. XLF enhances LX ligation activity in an ATP-independent and dependent manner. ATP-independent stimulation can be attributed to enhanced end-bridging. Whilst ATP alone fails to stimulate LX ligation activity, addition of XLF and ATP promotes ligation in a manner consistent with XLF-stimulated readenylation linked to ligation. We show that XLF is a weakly bound partner of the tightly associated LX complex and, unlike XRCC4, is dispensable for LX stability. 2BN cells, which have little, if any, residual XLF activity, show a 3-fold decreased ability to repair DNA double strand breaks covering a range of complexity. These findings strongly suggest that XLF is not essential for NHEJ but promotes LX adenylation and hence ligation. We propose a model in which XLF, by in situ recharging DNA ligase IV after the first ligation event, promotes double stranded ligation by a single LX complex.     

Sealing of gaps in duplex DNA by T4 DNA ligase.

Single-strand gaps in DNA molecules were found to be a substrate for T4 DNA ligase. Sealing of the gaps was optimal at the same conditions as ligation of blunt-ended DNA molecules. Spermidine at a concentration of 2 mM stimulated the ligation of gaps, as well as the joining of DNA molecules with cohesive and blunt ends. In addition, spermidine reduced the optimal ATP concentration. The ligation of single-stranded gaps was a slow process, reaching a plateau after several hours at 25 degrees C. Approximately 10% of circular duplex plasmid pBR322 DNA molecules with a gap of 1-5 nucleotides could be converted to a covalently closed form. When such molecules were used for transformation of E. coli cells deletion mutants were obtained at a high frequency. The size and position of the gaps and the deletions were equivalent, confirming that T4 DNA ligase was sealing the gaps.     

AMP-dependent DNA relaxation catalyzed by DNA ligase occurs by a nicking-closing mechanism.

In the presence of AMP and Mg2+, a covalently closed duplex DNA containing negative superhelical turns was treated with DNA ligase isolated from bacteriophage T4-infected E. coli. This resulted in the gradual and not sudden loss of superhelical turns as for example in the case of type I DNA topoisomerase. All DNA products remain covalently closed. Since T4 enzyme-mediated DNA relaxation is inhibited by both pyrophosphate and by ATP this suggests that DNA relaxing and DNA joining activities probably coincide. EDTA addition in the presence of a large excess of enzyme, induces the formation of nicked DNA products while protein denaturing treatments are not very effective. Our observations might suggest an involvement of the relaxing activity of DNA ligase during the ligation process.     

Kinetics and thermodynamics of nick sealing by T4 DNA ligase.

T4 DNA ligase is an Mg2+-dependent and ATP-dependent enzyme that seals DNA nicks in three steps: it covalently binds AMP, transadenylates the nick phosphate, and catalyses formation of the phosphodiester bond releasing AMP. In this kinetic study, we further detail the reaction mechanism, showing that the overall ligation reaction is a superimposition of two parallel processes: a 'processive' ligation, in which the enzyme transadenylates and seals the nick without dissociating from dsDNA, and a 'nonprocessive' ligation, in which the enzyme takes part in the abortive adenylation cycle (covalent binding of AMP, transadenylation of the nick, and dissociation). At low concentrations of ATP (<10 microM) and when the DNA nick is sealed with mismatching base pairs (e.g. five adjacent), this superimposition resolves into two kinetic phases, a burst ligation (approximately 0.2 min(-1)) and a subsequent slow ligation (approximately 2x10(-3) min(-1)). The relative rate and extent of each phase depend on the concentrations of ATP and Mg2+. The activation energies of self-adenylation (16.2 kcal.mol(-1)), transadenylation of the nick (0.9 kcal.mol(-1)), and nick-sealing (16.3-18.8 kcal.mol(-1)) were determined for several DNA substrates. The low activation energy of transadenylation implies that the transfer of AMP to the terminal DNA phosphate is a spontaneous reaction, and that the T4 DNA ligase-AMP complex is a high-energy intermediate. To summarize current findings in the DNA ligation field, we delineate a kinetic mechanism of T4 DNA ligase catalysis.     

Blunt-end and single-strand ligations by Escherichia coli ligase: influence on an in vitro amplification scheme

A ligase-based, in vitro DNA amplification system (LAR) has been described by Wu and Wallace [Genomics 4 (1989) 560-569]. This strategy is based on the ability of a DNA ligase to join the 5' phosphate of one DNA molecule to the 3' hydroxyl of a second during a nick-closing reaction. Escherichia coli DNA ligase has been used in place of the T4 DNA ligase in our study in order to limit template-independent ligation activities, which lower the sensitivity of this amplification procedure. The results of this study indicate that E. coli ligase also joins blunt-ended DNA molecules and some single-stranded oligodeoxyribonucleotides, in the absence of a complementary template, with an efficiency which is sensitive to both the concentrations of DNA substrate and enzyme.     

Real-time monitoring of nucleic acid ligation in homogenous solutions using molecular beacons

Nucleic acids ligation is a vital process in the repair, replication and recombination of nucleic acids. Traditionally, it is assayed by denatured gel electrophoresis and autoradiography, which are not sensitive, and are complex and discontinuous. Here we report a new approach for ligation monitoring using molecular beacon DNA probes. The molecular beacon, designed in such a way that its sequence is complementary with the product of the ligation process, is used to monitor the nucleic acid ligation in a homogeneous solution and in real-time. Our method is fast and simple. We are able to study nucleic acids ligation kinetics conveniently and to determine the activity of DNA ligase accurately. We have studied different factors that influence DNA ligation catalyzed by T4 DNA ligase. The major advantages of our method are its ultrasensitivity, excellent specificity, convenience and real-time monitoring in homogeneous solution. This method will be widely useful for studying nucleic acids ligation process and other nucleic acid interactions.     

Canonical nucleosides can be utilized by T4 DNA ligase as universal template bases at ligation junctions

T4 DNA ligase catalyzes the template-dependent ligation of DNA. Using T4 DNA ligase under specific experimental conditions, we demonstrate that each of the four canonical nucleosides, centrally located on a template molecule such that they flank the site of ligation, can direct the ligation of nucleic acids regardless of the identity of the terminal nucleosides being covalently joined. This universal templating capability extends to those positions adjacent to the ligation junction. This is the first report, irrespective of the ligation method used or the identity of the template nucleosides (including analogs), which shows that nucleosides can act essentially as universal templates at ligation junctions in vitro. The canonical nucleosides do, however, differ in their ability to template sequence- independent ligations, with thymidine and guanosine being equally effective, yet more effective than adenosine and cytidine. Results indicate that hybridization strength surrounding the ligation junction is an important factor. The implications of this previously undiscovered property of T4 DNA ligase with canonical nucleosides are discussed.     

One-base excess adaptor ligation method for walking uncloned genomic DNA

This report describes a novel and efficient method for walking the sequence of a genomic deoxyribonucleic acid (DNA) from a known region to an unknown region based on an oligodeoxynucleotide (oligo) cassette-mediated polymerase chain reaction technique. In this method, genomic DNA is digested by a restriction enzyme that generates a sticky 5′-end, followed by ligation of a one-base excess oligo-adaptor using T4 DNA ligase. The adaptor consists of two complementary oligos that form the same sticky end as the digested genomic DNA fragments, except that the 5′-overhang base overlaps the corresponding 3′-end base of the restriction site. This overhanging terminal base prevents ligation between the adaptors, and the appropriate molar ratio of adaptor to genomic DNA enables specific amplification of the target sequence. T4 DNA ligase catalyzes both the ligation of the phosphorylated overhang base of the adaptor to genomic DNA and the excision of the corresponding 3′-terminal base of the genomic DNA. This sequence-specific exonuclease activity of T4 DNA ligase was confirmed by ligation of an alternative adaptor in which the 5′-terminal base was not consistent with the corresponding 3′-terminal base. Using this technique, the 3′- and 5′-flanking sequences of the catalase gene of the ciliate Paramecium bursaria were determined.     

Functional characterization of the T4 DNA ligase: a new insight into the mechanism of action.

ATP-dependent DNA ligases are essential enzymes in both DNA replication and DNA repair processes. Here we report a functional characterization of the T4 DNA ligase. One N-terminal and two C-terminal deletion mutants were expressed in Escherichia coli as histidine- tagged proteins. An additional mutant bore a substitution of Lys159 in the active site that abolished ATP binding. All the proteins were tested in biochemical assays for ATP-dependent self-adenylation, DNA binding, nick joining, blunt-end ligation and AMP- dependent DNA relaxation. From this analysis we conclude that binding to DNA is mediated by sequences at both protein ends and plays a key role in the reaction. The enzyme establishes two different complexes with DNA: (i) a transient complex (T.complex) involving the adenylated enzyme; (ii) a stable complex (S.complex) requiring the deadenylated T4 DNA ligase. The formation of an S. complex seems to be relevant during both blunt-end ligation and DNA relaxation. Moreover the inactive His-K159L substitution mutant, although unable to self-adenylate, still possesses AMP-dependent DNA nicking activity.