Human xanthine oxidase changes its substrate specificity to aldehyde oxidase type upon mutation of amino acid residues in the active site: roles of active site residues in binding and activation of purine substrate

Xanthine oxidase (oxidoreductase; XOR) and aldehyde oxidase (AO) are similar in protein structure and prosthetic group composition, but differ in substrate preference. Here we show that mutation of two amino acid residues in the active site of human XOR for purine substrates results in conversion of the substrate preference to AO type. Human XOR and its Glu803-to-valine (E803V) and Arg881-to-methionine (R881M) mutants were expressed in an Escherichia coli system. The E803V mutation almost completely abrogated the activity towards hypoxanthine as a substrate, but very weak activity towards xanthine remained. On the other hand, the R881M mutant lacked activity towards xanthine, but retained slight activity towards hypoxanthine. Both mutants, however, exhibited significant aldehyde oxidase activity. The crystal structure of E803V mutant of human XOR was determined at 2.6 A resolution. The overall molybdopterin domain structure of this mutant closely resembles that of bovine milk XOR; amino acid residues in the active centre pocket are situated at very similar positions and in similar orientations, except that Glu803 was replaced by valine, indicating that the decrease in activity towards purine substrate is not due to large conformational change in the mutant enzyme. Unlike wild-type XOR, the mutants were not subject to time-dependent inhibition by allopurinol.     

Functional roles for amino acids in active site loop II of a hypoxanthine phosphoribosyltransferase

A flexible loop of amino acids (loop II) closes over the active site of hypoxanthine phosphoribosyltransferase (HPRT) as the enzyme approaches the transition state [Biochemistry 37 (1998) 17120]. Formerly, the deletion of much of loop II from the HPRT of Trypanosoma cruzi resulted in a 2-3 order of magnitude reduction in k(cat) values with relatively modest changes in the Michaelis constants for substrates [Biochim. Biophys. Acta 1537 (2001) 63-70]. However, the contributions of individual loop II residues to catalysis remained poorly understood or have been disputed. Herein, saturation mutagenesis was used to generate relatively random sets of mutations in the 12 residues of active site loop II in the HPRT from T. cruzi and steady-state kinetics was used to investigate reactions catalyzed by the mutants. The results of analyses of 18 different mutations in an evolutionarily invariant Ser-Tyr dipeptide are consistent with interactions, between main chain nitrogen atoms of these residues and the O1A atom of phosphoribosylpyrophosphate (PRPP) or pyrophosphate (PPi), being essential for efficient enzyme chemistry. The results of analyses of 55 mutations in the nine other amino acids in loop II are inconsistent with these residues participating directly in enzyme chemistry, but are consistent with several of their side chains influencing loop flexibility and folding, as well as the efficiency for nucleotide formation relative to pyrophosphorolysis.     

Critical amino acids in the active site of meprin metalloproteinases for substrate and peptide bond specificity

The protease domains of the evolutionarily related alpha and beta subunits of meprin metalloproteases are approximately 55% identical at the amino acid level; however, their substrate and peptide bond specificities differ markedly. The meprin beta subunit favors acidic residues proximal to the scissile bond, while the alpha subunit prefers small or aromatic amino acids flanking the scissile bond. Thus gastrin, a peptide that contains a string of five Glu residues, is an excellent substrate for meprin beta, while it is not hydrolyzed by meprin alpha. Work herein aimed to identify critical amino acids in the meprin active sites that determine the substrate specificity differences. Sequence alignments and homology models, based on the crystal structure of the crayfish astacin, showed electrostatic differences within the meprin active sites. Site-directed mutagenesis of active site residues demonstrated that replacement of a hydrophobic residue by a basic amino acid enabled the meprin alpha protease to cleave gastrin. The meprin alphaY199K mutant was most effective; the corresponding mutation of meprin betaK185Y resulted in decreased activity toward gastrin. Peptide cleavage site determinations and kinetic analyses using a variety of peptides extended evidence that meprin alphaTyr-199/betaLys-185 are substrate specificity determinants in meprin active sites. These studies shed light on the molecular basis for the substrate specificity differences of astacin metalloproteinases.     

Effects of mutations of the active site arginine residues in 4-oxalocrotonate tautomerase on the pKa values of active site residues and on the pH dependence of catalysis.

The unusually low pK(a) value of the general base catalyst Pro-1 (pK(a) = 6.4) in 4-oxalocrotonate tautomerase (4-OT) has been ascribed to both a low dielectric constant at the active site and the proximity of the cationic residues Arg-11 and Arg-39 [Stivers, J. T., Abeygunawardana, C., Mildvan, A. S., Hajipour, G., and Whitman, C. P. (1996) Biochemistry 35, 814-823]. In addition, the pH-rate profiles in that study showed an unidentified protonated group essential for catalysis with a pK(a) of 9.0. To address these issues, the pK(a) values of the active site Pro-1 and lower limit pK(a) values of arginine residues were determined by direct (15)N NMR pH titrations. The pK(a) values of Pro-1 and of the essential acid group were determined independently from pH-rate profiles of the kinetic parameters of 4-OT in arginine mutants of 4-OT and compared with those of wild type. The chemical shifts of all of the Arg Nepsilon resonances in wild-type 4-OT and in the R11A and R39Q mutants were found to be independent of pH over the range 4.9-9.7, indicating that no arginine is responsible for the kinetically determined pK(a) of 9.0 for an acidic group in free 4-OT. With the R11A mutant, where k(cat)/K(m) was reduced by a factor of 10(2.9), the pK(a) of Pro-1 was not significantly altered from that of the wild-type enzyme (pK(a) = 6.4 +/- 0.2) as revealed by both direct (15)N NMR titration (pK(a) = 6.3 +/- 0.1) and the pH dependence of k(cat)/K(m) (pK(a) = 6.4 +/- 0.2). The pH-rate profiles of both k(cat)/K(m) and k(cat) for the reaction of the R11A mutant with the dicarboxylate substrate, 2-hydroxymuconate, showed humps, i.e., sharply defined maxima followed by nonzero plateaus. The humps disappeared in the reaction with the monocarboxylate substrate, 2-hydroxy-2,4-pentadienoate, indicating that, unlike the wild-type enzyme which reacts only with the dianionic form of the dicarboxylic substrate, the R11A mutant reacts with both the 6-COOH and 6-COO(-) forms, with the 6-COOH form being 12-fold more active. This reversal in the preferred ionization state of the 6-carboxyl group of the substrate that occurs upon mutation of Arg-11 to Ala provides strong evidence that Arg-11 interacts with the 6-carboxylate of the substrate. In the R39Q mutant, where k(cat)/K(m) was reduced by a factor of 10(3), the kinetically determined pK(a) value for Pro-1 was 4.6 +/- 0.2, while the ionization of Pro-1 showed negative cooperativity with an apparent pK(a) of 7.1 +/- 0.1 determined by 1D (15)N NMR. From the Hill coefficient of 0.54, it can be shown that the apparent pK(a) value of 7.1 could result most simply from the averaging of two limiting pK(a) values of 4.6 and 8.2. Mutation of Arg-39, by altering the structure of the beta-hairpin which covers the active site, could result in an increase in the solvent exposure of Pro-1, raising its upper limit pK(a) value to 8.2. In the R39A mutant, the kinetically determined pK(a) of Pro-1 was also low, 5.0 +/- 0.2, indicating that in both the R39Q and R39A mutants, only the sites with low pK(a) values were kinetically operative. With the fully active R61A mutant, the kinetically determined pK(a) of Pro-1 (pK(a) = 6.5 +/- 0.2) agreed with that of wild-type 4-OT. It is concluded that the unusually low pK(a) of Pro-1 shows little contribution from electrostatic effects of the nearby cationic Arg-11, Arg-39, and Arg-61 residues but results primarily from a site of low local dielectric constant.     

Systematic exploration of active site mutations on human deoxycytidine kinase substrate specificity

Human deoxycytidine kinase (dCK) is responsible for the phosphorylation of a number of clinically important nucleoside analogue prodrugs in addition to its natural substrates, 2'-deoxycytidine, 2'-deoxyguanosine, and 2'-deoxyadenosine. To improve the low catalytic activity and tailor the substrate specificity of dCK, we have constructed libraries of mutant enzymes and tested them for thymidine kinase (tk) activity. Random mutagenesis was employed to probe for amino acid positions with an impact on substrate specificity throughout the entire enzyme structure, identifying positions Arg104 and Asp133 in the active site as key residues for substrate specificity. Kinetic analysis indicates that Arg104Gln/Asp133Gly creates a "generalist" kinase with broader specificity and elevated turnover for natural and prodrug substrates. In contrast, the substitutions of Arg104Met/Asp133Thr, obtained via site-saturation mutagenesis, yielded a mutant with reversed substrate specificity, elevating the specific constant for thymidine phosphorylation by over 1000-fold while eliminating activity for dC, dA, and dG under physiological conditions. The results illuminate the key contributions of these two amino acid positions to enzyme function by demonstrating their ability to moderate substrate specificity.     

Influence of the acetylcholinesterase active site protonation on omega loop and active site dynamics

Existence of alternative entrances in acetylcholinesterase (AChE) could explain the contrast between the very high AChE catalytic efficiency and the narrow and long access path to the active site revealed by X-ray crystallography. Alternative entrances could facilitate diffusion of the reaction products or at least water and ions from the active site. Previous molecular dynamics simulations identified side door and back door as the most probable alternative entrances. The simulations of non-inhibited AChE suggested that the back door opening events occur only rarely (0.8% of the time in the 10ns trajectory). Here we present a molecular dynamics simulation of non-inhibited AChE, where the back door opening appears much more often (14% of the time in the 12ns trajectory) and where the side door opening was observed quite frequently (78% of trajectory time). We also present molecular dynamics, where the back door does not open at all, or where large conformational changes of the AChE omega loop occur together with alternative passage opening events. All these differences in AChE dynamical behavior are caused by different protonation states of two glutamate residues located on bottom of the active site gorge (Glu202 and G450 in Mus musculus AChE). Our results confirm the results of previous molecular dynamics simulations, expand the view and suggest the probable reasons for the overall conformational behavior of AChE omega loop.     

Rearrangement of tryptophan residues in caspase-3 active site upon activation

Caspase-3, one of the major apoptotic proteins, is a cysteine protease and exists as an inactive zymogen in healthy cells. In this study, the dynamic nature of the rearrangements of two tryptophan residues (Trp 206 and Trp 214) in the active sites of caspase-3 during the activation was analyzed by measuring the fluorescence lifetimes. Significant changes in the lifetime occurred upon activation by the specific cleavage. In addition, two mutant proteins that have only one tryptophan residue also showed the similar changes. These data indicate that the activation of caspase-3 resulted in the reorganization of both tryptophan residues.     

The influence of active site loop mutations on the thermal stability of azurin from Pseudomonas aeruginosa

The copper site and overall structures of azurin (AZ) variants in which the amicyanin (AMI) and plastocyanin (PC) metal binding loops have been introduced, AZAMI and AZPC, respectively, are similar to that of AZ, whereas the loop conformations resemble those in the native proteins. To assess the influence of these loop mutations on stability, the thermal unfolding of AZAMI and AZPC has been investigated by differential scanning calorimetry, absorption and fluorescence spectroscopy. The calorimetric profiles of both variants exhibit a complex shape consisting of two endothermic peaks and an exothermic peak. The temperature of the maximum heat of absorption for the single endothermic peak is 82.7°C for AZ, whereas for AZAMI and AZPC the most intense endothermic peaks are at 74.9 and 68.1°C comparable to values for AMI and PC, respectively. Denaturation investigated using the temperature dependence of the absorbance at ～600nm and Trp emission, also demonstrates decreased stability for both loop mutants. The thermal transition between the native and the denaturated states is irreversible, scan rate dependent and consistent with the two-state irreversible model. The structure of the active-site loop has a dramatic effect on the kinetic stability and the unfolding pathway of cupredoxins.     

Identification of interacting amino acids at the histone 2A--2B binding site.

Histones 2A and 2B of calf thymus were cross-linked within intact nuclei by UV irradiation. This procedure induces the formation of covalent cross-links between noncovalently interacting residues in the histones of native chromatin. Tryptic peptide and partial sequence analysis of the cross-linked product has shown that the covalent linkage is between tyrosine-37, -40, or -42 (we have not yet determined which) of H2B and proline-26 of H2A. We conclude that these residues constitute part of the hydrophobic H2A--H2B binding domain within the nucleosomes of native chromatin.     

Identification of amino acid residues at the active site of human liver serine hydroxymethyltransferase

Chemical modification of amino acid residues with phenylglyoxal, diethylpyrocarbonate, and N-bromosuccinimide indicated that at least one residue each of arginine, histidine, and tryptophan were necessary for the activity of human liver serine hydroxymethyltransferase. Protection by substrates suggested that these residues might occur at the active site of the enzyme.     

Identification of catalytic amino acids in the human GTP fucose pyrophosphorylase active site

GTP-l-fucose pyrophosphorylase(GFPP) catalyzes the reversible formation of the nucleotide-sugar GDP-beta-l-fucose from guanosine triphosphate and beta-l-fucose-1-phosphate. The enzyme functions primarily in the mammalian liver and kidney to salvage free fucose during the breakdown of glycoproteins and glycolipids. GFPP shares little primary sequence identity with other nucleotide-sugar metabolizing enzymes, and the three-dimensional structure of the protein is unknown. The enzyme does contain several sequences that could be nucleotide binding sites, but none of them are an exact match to consensus sequences. Using a combination of site-directed mutagenesis and UV photoaffinity cross-linking, we have identified five amino acid residues that are critical for catalysis. Some of these amino acids are found within the poorly conserved nucleotide binding consensus structures, while others represent new motifs. Two active site lysines can be cross-linked to photoaffinity probes. The site of cross-linking depends on the probe used. The identification of these critical residues highlights how distinct GFPP is from other nucleotide-sugar pyrophosphorylases.     

Investigating the role of active site residues of Rhodotorula gracilis D-amino acid oxidase on its substrate specificity

D-amino acid oxidase (DAAO) is a flavoprotein that catalyzes stereospecifically the oxidative deamination of D-amino acids. The wild-type DAAO is mainly active on neutral D-amino acids, while basic D-amino acids are poor substrates and the acidic ones are virtually not oxidized. To present a comprehensive picture of how the active site residues can modulate the substrate specificity a number of mutants at position M213, Y223, Y238, R285, S335, and Q339 were prepared in the enzyme from the yeast Rhodotorula gracilis. All DAAO mutants have spectral properties similar to those of the wild-type enzyme and are catalytically active, thus excluding an essential role in catalysis; a lower activity on neutral and basic amino acids was observed. Interestingly, an increase in activity and (k(cat)/K(m))(app) ratio on D-aspartate was observed for all the mutants containing an additional charged residue in the active site. The active site of yeast DAAO appears to be a highly evolved scaffold built up through evolution to optimize the oxidative deamination of neutral D-amino acids without limiting its substrate specificity. It is noteworthy, that introduction of a sole, additional, positively charged residue in the active site is sufficient to optimize the reactivity on acidic D-amino acids, giving rise to kinetic properties similar to those of D-aspartate oxidase.     

Mutational analysis of the interaction between active site residues and the loop region in mammalian purple acid phosphatases

Mammalian purple acid phosphatases (PAPs) can be divided into two groups, which exhibit distinct spectroscopic and kinetics properties: PAPs that consist of a single 36 kDa polypeptide, and PAPs that have undergone limited proteolysis to give two fragments with masses of 16 and 20 kDa, respectively. Proteolysis results in an increase in enzymatic activity, an increase in the optimal pH for activity, and a change in the g(z)() value of the characteristic EPR spectrum of the mixed-valence binuclear iron center. It has been proposed that these changes are due to the loss of interactions between Asp146 in an exposed loop region and active site residues upon proteolysis. In the present study, site-directed mutagenesis of Asp146 in recombinant rat bone PAP (recRPAP) has confirmed this hypothesis. Conversion of Asp146 into Ala, which eliminates the interaction of the side chain with the active site, resulted in an enzyme with properties typical of PAPs isolated in proteolytically cleaved forms. The Asp146Asn and Asp146Glu mutants were also prepared and examined to assess the effects of altered electrostatic interactions and side-chain length. Limited proteolysis of all three mutant enzymes with cathepsin L resulted in a significant increase in catalytic activity. Thus, although the interaction between Asp146 and (an) active site residue(s) is the major factor responsible for the low catalytic activity of uncleaved PAPs, other interactions are also important. Since both p-nitrophenyl phosphate and osteopontin, a potential in vivo substrate, show the same level of activation, the observed increase in catalytic activity upon proteolysis is likely to be due to electrostatic rather than steric effects. EPR spectra of FeZn-recRPAP before and after cleavage by cathepsin L suggest that cleavage primarily affects the divalent metal site. The observation that pK(es,1) is also sensitive to changes at the divalent site is consistent with the proposal that the nucleophilic hydroxide is that bridging the divalent and trivalent metals.     

Evolution of antibiotic resistance: several different amino acid substitutions in an active site loop alter the substrate profile of β-lactamase

In order to understand how TEM-1 β-lactamase substrate specificity can be altered by mutation, amino acid residues 161 through to 170 were randomly mutagenized to sample all possible amino acid substitutions. The 161–170 region includes a portion of an omega loop structure, which is involved in the formation of the active-site pocket. The percentage of random sequences that provide bacterial resistance to either ampicillin or to the extended-spectrum cephalosporin ceftazidime was determined. It was found that the sequence requirements for wild-type levels of ampicillin resistance are much more stringent than the sequence requirements for ceftazidime resistance. Surprisingly, more than 50% of all amino acid substitutions in the 161-170 region result in levels of ceftazidime resistance at least three times greater than wild type. In addition, by increasing the level of the selection for ceftazidime resistance, substitutions that result in a greater than 100-fold increase in ceftazidime resistance were identified. Characterization of altered β-lactamase enzymes indicated that while their catalytic efficiency (K_cat/K_m) for ceftazidime hydrolysis is higher, the enzymes are poorly expressed relative to wild-type TEM-1 β-lactamase.     

The ribotoxin restrictocin recognizes its RNA substrate by selective engagement of active site residues

Restrictocin and related fungal endoribonucleases from the α-sarcin family site-specifically cleave the sarcin/ricin loop (SRL) on the ribosome to inhibit translation and ultimately trigger cell death. Previous studies showed that the SRL folds into a bulged-G motif and tetraloop, with restrictocin achieving a specificity of ～1000-fold by recognizing both motifs only after the initial binding step. Here, we identify contacts within the protein-RNA interface and determine the extent to which each one contributes to enzyme specificity by examining the effect of protein mutations on the cleavage of the SRL substrate compared to a variety of other RNA substrates. As with other biomolecular interfaces, only a subset of contacts contributes to specificity. One contact of this subset is critical, with the H49A mutation resulting in quantitative loss of specificity. Maximum catalytic activity occurs when both motifs of the SRL are present, with the major contribution involving the bulged-G motif recognized by three lysine residues located adjacent to the active site: K110, K111, and K113. Our findings support a kinetic proofreading mechanism in which the active site residues H49 and, to a lesser extent, Y47 make greater catalytic contributions to SRL cleavage than to suboptimal substrates. This systematic and quantitative analysis begins to elucidate the principles governing RNA recognition by a site-specific endonuclease and may thus serve as a mechanistic model for investigating other RNA modifying enzymes.     

Assignment of functional amino acids around the active site of human DNA topoisomerase IIalpha

An expression library for active site mutants of human topoisomerase IIalpha (TOP2alpha) was constructed by replacing the sequence encoding residues 793-808 with a randomized oligonucleotide cassette. This plasmid library was transformed into a temperature-sensitive yeast strain (top2-1), and viable transformants were selected at the restrictive temperature. Among the active TOP2alpha mutants, no substitution was allowed at Tyr(805), the 5' anchor of the cleaved DNA, and only conservative substitutions were allowed at Leu(794), Asp(797), Ala(801), and Arg(804). Thus, these 5 residues are critical for human TOP2alpha activity, and the remaining mutagenized residues are less critical for function. Using the x-ray crystal structure of yeast TOP2 as a structural model, it can be deduced that these 5 functionally important residues lie in a plane. One of the possible functions of this plane may be that it interacts with the DNA substrate upon catalysis. The side chains of Ser(803) and Lys(798), which confer drug resistance, lie adjacent to this plane.     

Porphyrin binding and distortion and substrate specificity in the ferrochelatase reaction: the role of active site residues

The specific insertion of a divalent metal ion into tetrapyrrole macrocycles is catalyzed by a group of enzymes called chelatases. Distortion of the tetrapyrrole has been proposed to be an important component of the mechanism of metallation. We present the structures of two different inhibitor complexes: (1) N-methylmesoporphyrin (N-MeMP) with the His183Ala variant of Bacillus subtilis ferrochelatase; (2) the wild-type form of the same enzyme with deuteroporphyrin IX 2,4-disulfonic acid dihydrochloride (dSDP). Analysis of the structures showed that only one N-MeMP isomer out of the eight possible was bound to the protein and it was different from the isomer that was earlier found to bind to the wild-type enzyme. A comparison of the distortion of this porphyrin with other porphyrin complexes of ferrochelatase and a catalytic antibody with ferrochelatase activity using normal-coordinate structural decomposition reveals that certain types of distortion are predominant in all these complexes. On the other hand, dSDP, which binds closer to the protein surface compared to N-MeMP, does not undergo any distortion upon binding to the protein, underscoring that the position of the porphyrin within the active site pocket is crucial for generating the distortion required for metal insertion. In addition, in contrast to the wild-type enzyme, Cu²⁺-soaking of the His183Ala variant complex did not show any traces of porphyrin metallation. Collectively, these results provide new insights into the role of the active site residues of ferrochelatase in controlling stereospecificity, distortion and metallation.     

Chemical modification of specific active site amino acid residues of Enterobacter aerogenes glycerol dehydrogenase

Enterobacter aerogenes glycerol dehydrogenase (G1DH EC 1.1.1.6), a tetrameric NAD+ specific enzyme catalysing the interconversion of glycerol and dihydroxyacetone, was inactivated on reaction with pyridoxal 5-phosphate (PLP) and o-phthalaldehyde (OPA). Fluorescence spectra of PLP-modified, sodium borohydride-reduced G1DH indicated the specific modification of epsilon-amino groups of lysine residues. The extent of inhibition was concentration and time dependent. NAD+ and NADH provided complete protection against enzyme inactivation by PLP, indicating the reactive lysine is at or near the coenzyme binding site. Modification of G1DH by the bifunctional reagent OPA, which reacts specifically with proximal epsilon-NH2 group of lysines and -SH group of cysteines to form thioisoindole derivatives, inactivated the enzyme. Molecular weight determinations of the modified enzyme indicated the formation of intramolecular thioisoindole formation. Glycerol partially protected the enzyme against OPA inactivation, whereas NAD+ was ineffective. These results show that the lysine involved in the OPA reaction is different from the PLP-reactive lysine, which is at or near the coenzyme binding site. DTNB titration showed the presence of only a single cysteine residue per monomer of G1DH. This could be participating with a proximal lysine residue to form a thioisoindole derivative observed as a result of OPA modification.     

Studies on determination of active site amino acid residues in glyoxylate synthetase from potato tuber chloroplasts

A homogeneous preparation of glyoxylate synthetase from greening potato tubers was used to study the functional role of disulphide groups, lysine and tryptophan residues in enzyme catalysis. The formation of a thioisoindole derivative was demonstrated by spectral analysis of the reduced and o-phthalaldehyde-treated enzymes. o-Phthalaldehyde modification resulted in about a 25 % loss of tryptophan emission at 336 nm and the appearance of a 410-nm emission peak characteristic of a thioisoindole. Ferrous iron was capable of generating thiol groups and addition of substrate resulted in a faster disappearance of these thiols. The optimal time for maximum glyoxylate synthesis by glyoxylate synthetase paralleled the disappearance of these thiols. Involvement of lysine and tryptophan residues in the enzyme reaction was demonstrated by the inhibition of activity by pyridoxal 5′-phosphate and dimethyl(2-hydroxy 5-nitrobenzyl) sulphonium bromide (DMHNB), respectively. Pyridoxal phosphate strongly and reversibly inhibited glyoxylate synthetase, and substrate and metal ion provided significant protection against inhibition. The results suggest that the lysine residue may be at or near the active binding site. The lysyl residue formed a Schiff base with pyridoxal phosphate which was stabilised by NaBH₄. Glyoxylate synthetase was also irreversibly inactivated by a tryptophan selective reagent, DMHNB, while substrate provided substantial protection against inactivation. Kinetic analysis and correlation of the spectral data at 410 nm indicated that complete inactivation by DMHNB resulted from the modification of 5 tryptophan residues/subunit, of which one was essential for activity. The available evidence suggests a possible concerted action of enzyme disulphides, ferrous iron, lysine and aromatic amino acid residues in the synthesis of glyoxylate by this enzyme.     

Modification of near active site residues in organophosphorus hydrolase reduces metal stoichiometry and alters substrate specificity

Organophosphorus hydrolase (OPH, EC 8.1.3.1) is a dimeric, bacterial enzyme that detoxifies many organophosphorus neurotoxins by hydrolyzing a variety of phosphonate bonds. The histidinyl residues at amino acid positions 254 and 257 are located near the bimetallic active site present in each monomer. It has been proposed that these residues influence catalysis by interacting with active site residues and the substrate in the binding pocket. We replaced the histidine at position 254 with arginine (H254R) and the one at position 257 with leucine (H257L) independently to form the single-site-modified enzymes. The double modification was also constructed to incorporate both changes (H254R/H257L). Although native OPH has two metals at each active site (four per dimer), all three of these altered enzymes possessed only two metals per dimer while retaining considerable enzymatic activity for the preferred phosphotriester (P-O bond) substrate, paraoxon (5-100% kcat). The three altered enzymes achieved a 2-30-fold increase in substrate specificity (kcat/Km) for demeton S (P-S bond), an analogue for the chemical warfare agent VX. In contrast, the substrate specificity for diisopropyl fluorophosphonate (P-F bond) was substantially decreased for each of these enzymes. In addition, H257L and H254R/H257L showed an 11- and 18-fold increase, respectively, in specificity for NPPMP, the analogue for the chemical warfare agent soman. These results demonstrate the ability to significantly enhance the specificity of OPH for various substrates by site-specific modifications, and it is suggested that changes in metal requirements may affect these improved catalytic characteristics by enhancing structural flexibility and improving access of larger substrates to the active site, while simultaneously decreasing the catalytic efficiency for smaller substrates.