Tortuosity triggers platelet activation and thrombus formation in microvessels

Tortuous blood vessels are often seen in humans in association with thrombosis, atherosclerosis, hypertension, and aging. Vessel tortuosity can cause high fluid shear stress, likely promoting thrombosis. However, the underlying physical mechanisms and microscale processes are poorly understood. Accordingly, the objectives of this study were to develop and use a new computational approach to determine the effects of venule tortuosity and fluid velocity on thrombus initiation. The transport, collision, shear-induced activation, and receptor-ligand adhesion of individual platelets in thrombus formation were simulated using discrete element method. The shear-induced activation model assumed that a platelet became activated if it experienced a shear stress above a relative critical shear stress or if it contacted an activated platelet. Venules of various levels of tortuosity were simulated for a mean flow velocity of 0.10?cm s(-1), and a tortuous arteriole was simulated for a mean velocity of 0.47?cm s(-1). Our results showed that thrombus was initiated at inner walls in curved regions due to platelet activation in agreement with experimental studies. Increased venule tortuosity modified fluid flow to hasten thrombus initiation. Compared to the same sized venule, flow in the arteriole generated a higher amount of mural thrombi and platelet activation rate. The results suggest that the extent of tortuosity is an important factor in thrombus initiation in microvessels.     

A novel mouse-driven ex vivo flow chamber for the study of leukocyte and platelet function

Various in vitro and in vivo techniques exist for study of the microcirculation. Whereas in vivo systems impress with their physiological fidelity, in vitro systems excel in the amount of reduction that can be achieved. Here we introduce the autoperfused ex vivo flow chamber designed to study murine leukocytes and platelets under well-defined hemodynamic conditions. In our model, the murine heart continuously drives the blood flow through the chamber, providing a wide range of physiological shear rates. We used a balance of force approach to quantify the prevailing forces at the chamber walls. Numerical simulations show the flow characteristics in the chamber based on a shear-thinning fluid model. We demonstrate specific rolling of wild-type leukocytes on immobilized P-selectin, abolished by a blocking MAb. When uncoated, the surfaces having a constant shear rate supported individual platelet rolling, whereas on areas showing a rapid drop in shear platelets interacted in previously unreported grapelike conglomerates, suggesting an influence of shear rate on the type of platelet interaction. In summary, the ex vivo chamber amounts to an external vessel connecting the arterial and venous systems of a live mouse. This method combines the strengths of existing in vivo and in vitro systems in the study of leukocyte and platelet function. autoperfused flow chamber; intravital microscopy; inflammation; thrombus formation     

Development of a flow-through system to create occluding thrombus

Occlusive thrombosis accounts for many heart attacks and strokes. These acute events are difficult to catch in patients and animal test methods may be misleading because anti-thrombotic therapeutics often do not cross-react with different species. This paper presents a new flow-through system that leads to rapid occlusive thrombosis in arterial flow conditions. Whole porcine blood is perfused through a tubular test section. The growing thrombus is visualized in real time from early platelet attachment, through accumulation, to occlusion. The progression of flow rate reduction provides a clear distinguishing parameter between thrombus formation and embolization. Thrombus growth rate is a linear function of very high shear rate beyond 40,000 s(-1). The histology of the thrombus reveals predominantly platelet accumulation and growth as a rough surface with tendrils. This flow-through system may be useful for the economic testing of new anti-thrombosis therapies.     

Glaucocalyxin A Inhibits Platelet Activation and Thrombus Formation Preferentially via GPVI Signaling Pathway

Platelets play a pivotal role in atherothrombosis and the antiplatelet agents have been proved to be useful in preventing onset of acute clinical events including myocardial infarction and stroke. Increasing number of natural compounds has been identified to be potential antiplatelet agents. Here we report the antiplatelet effect of glaucocalyxin A (GLA), an ent-diterpenoid that we isolated and purified from the aerial parts of Rabdosia japonica (Burm. f.) var. glaucocalyx (Maxim.) Hara, and investigate the molecular mechanisms by which GLA inhibits platelet activation and thrombus formation. The effect of GLA on platelet activation was measured using platelets freshly isolated from peripheral blood of healthy donors. Results showed that pretreatment of human platelets with lower concentrations of GLA (0.01μg/ml, 0.1μg/ml) significantly inhibited platelet aggregation induced by collagen (P<0.001) and CRP (P<0.01), a synthetic GPVI ligand, but not by ADP and U46619. Accordingly, GLA inhibited collagen-stimulated tyrosine phosphorylation of Syk, LAT, and phospholipase Cγ2, the signaling events in collagen receptor GPⅥ pathway. GLA also inhibited platelet p-selectin secretion and integrin activation by convulxin, a GPVI selective ligand. Additionally, GLA was found to inhibit low-dose thrombin-induced platelet activation. Using a flow chamber device, GLA was found to attenuate platelet adhesion on collagen surfaces in high shear condition. In vivo studies showed that GLA administration increased the time for complete occlusion upon vascular injury in mice, but did not extend tail-bleeding time when mice were administered with relatively lower doses of GLA. Therefore, the present results provide the molecular basis for the inhibition effect of GLA on platelet activation and its in vivo effect on thrombus formation, suggesting that GLA could potentially be developed as an antiplatelet and antithrombotic agent.     

Functional Divergence of Platelet Protein Kinase C (PKC) Isoforms in Thrombus Formation on Collagen

Arterial thrombosis, a major cause of myocardial infarction and stroke, is initiated by activation of blood platelets by subendothelial collagen. The protein kinase C (PKC) family centrally regulates platelet activation, and it is becoming clear that the individual PKC isoforms play distinct roles, some of which oppose each other. Here, for the first time, we address all four of the major platelet-expressed PKC isoforms, determining their comparative roles in regulating platelet adhesion to collagen and their subsequent activation under physiological flow conditions. Using mouse gene knock-out and pharmacological approaches in human platelets, we show that collagen-dependent α-granule secretion and thrombus formation are mediated by the conventional PKC isoforms, PKCα and PKCβ, whereas the novel isoform, PKCθ, negatively regulates these events. PKCδ also negatively regulates thrombus formation but not α-granule secretion. In addition, we demonstrate for the first time that individual PKC isoforms differentially regulate platelet calcium signaling and exposure of phosphatidylserine under flow. Although platelet deficient in PKCα or PKCβ showed reduced calcium signaling and phosphatidylserine exposure, these responses were enhanced in the absence of PKCθ. In summary therefore, this direct comparison between individual subtypes of PKC, by standardized methodology under flow conditions, reveals that the four major PKCs expressed in platelets play distinct non-redundant roles, where conventional PKCs promote and novel PKCs inhibit thrombus formation on collagen.     

Thrombin-dependent Incorporation of von Willebrand Factor into a Fibrin Network

Attachment of platelets from the circulation onto a growing thrombus is a process involving multiple platelet receptors, endothelial matrix components, and coagulation factors. It has been indicated previously that during a transglutaminase reaction activated factor XIII (FXIIIa) covalently cross-links von Willebrand factor (VWF) to polymerizing fibrin. Bound VWF further recruits and activates platelets via interactions with the platelet receptor complex glycoprotein Ib (GPIb). In the present study we found proof for binding of VWF to a fibrin monomer layer during the process of fibrinogen-to-fibrin conversion in the presence of thrombin, arvin, or a snake venom from Crotalus atrox. Using a domain deletion mutant we demonstrated the involvement of the C domains of VWF in this binding. Substantial binding of VWF to fibrin monomers persisted in the presence of the FXIIIa inhibitor K9-DON, illustrating that cross-linking via factor XIII is not essential for this phenomenon and suggesting the identification of a second mechanism through which VWF multimers incorporate into a fibrin network. Under high shear conditions, platelets were shown to adhere to fibrin only if VWF had been incorporated. In conclusion, our experiments show that the C domains of VWF and the E domain of fibrin monomers are involved in the incorporation of VWF during the polymerization of fibrin and that this incorporation fosters binding and activation of platelets. Fibrin thus is not an inert end product but partakes in further thrombus growth. Our findings help to elucidate the mechanism of thrombus growth and platelet adhesion under conditions of arterial shear rate.     

A multiscale biomechanical model of platelets: Correlating with in-vitro results

Using dissipative particle dynamics (DPD) combined with coarse grained molecular dynamics (CGMD) approaches, we developed a multiscale deformable platelet model to accurately describe the molecular-scale intra-platelet constituents and biomechanical properties of platelets in blood flow. Our model includes the platelet bilayer membrane, cytoplasm and an elaborate elastic cytoskeleton. Correlating numerical simulations with published in-vitro experiments, we validated the biorheology of the cytoplasm, the elastic response of membrane to external stresses, and the stiffness of the cytoskeleton actin filaments, resulting in an accurate representation of the molecular-level biomechanical microstructures of platelets. This enabled us to study the mechanotransduction process of the hemodynamic stresses acting onto the platelet membrane and transmitted to these intracellular constituents. The platelets constituents continuously deform in response to the flow induced stresses. To the best of our knowledge, this is the first molecular-scale platelet model that can be used to accurately predict platelets activation mechanism leading to thrombus formation in prosthetic cardiovascular devices and in vascular disease processes. This model can be further employed to study the effects of novel therapeutic approaches of modulating platelet properties to enhance their shear resistance via mechanotransduction pathways.     

Modeling Thrombus Shell: Linking Adhesion Receptor Properties and Macroscopic Dynamics

Damage to arterial vessel walls leads to the formation of platelet aggregate, which acts as a physical obstacle for bleeding. An arterial thrombus is heterogeneous; it has a dense inner part (core) and an unstable outer part (shell). The thrombus shell is very dynamic, being composed of loosely connected discoid platelets. The mechanisms underlying the observed mobility of the shell and its (patho)physiological implications are unclear. To investigate arterial thrombus mechanics, we developed a novel, to our knowledge, two-dimensional particle-based computational model of microvessel thrombosis. The model considers two types of interplatelet interactions: primary reversible (glycoprotein Ib (GPIb)-mediated) and stronger integrin-mediated interaction, which intensifies with platelet activation. At high shear rates, the former interaction leads to adhesion, and the latter is primarily responsible for stable platelet aggregation. Using a stochastic model of GPIb-mediated interaction, we initially reproduced experimental curves that characterize individual platelet interactions with a von Willebrand factor-coated surface. The addition of the second stabilizing interaction results in thrombus formation. The comparison of thrombus dynamics with experimental data allowed us to estimate the magnitude of critical interplatelet forces in the thrombus shell and the characteristic time of platelet activation. The model predicts moderate dependence of maximal thrombus height on the injury size in the absence of thrombin activity. We demonstrate that the developed stochastic model reproduces the observed highly dynamic behavior of the thrombus shell. The presence of primary stochastic interaction between platelets leads to the properties of thrombus consistent with in vivo findings; it does not grow upstream of the injury site and covers the whole injury from the first seconds of the formation. А simplified model, in which GPIb-mediated interaction is deterministic, does not reproduce these features. Thus, the stochasticity of platelet interactions is critical for thrombus plasticity, suggesting that interaction via a small number of bonds drives the dynamics of arterial thrombus shell.     

Clot Permeability,Agonist Transport,and Platelet Binding Kinetics in Arterial Thrombosis

The formation of wall-adherent platelet aggregates is a critical process in arterial thrombosis. A growing aggregate experiences frictional drag forces exerted on it by fluid moving over or through the aggregate. The magnitude of these forces is strongly influenced by the permeability of the developing aggregate; the permeability depends on the aggregate’s porosity. Aggregation is mediated by formation of ensembles of molecular bonds; each bond involves a plasma protein bridging the gap between specific receptors on the surfaces of two different platelets. The ability of the bonds existing at any time to sustain the drag forces on the aggregate determines whether it remains intact or sheds individual platelets or larger fragments (emboli). We investigate platelet aggregation in coronary-sized arteries using both computational simulations and in vitro experiments. The computational model tracks the formation and breaking of bonds between platelets and treats the thrombus as an evolving porous, viscoelastic material, which moves differently from the background fluid. This relative motion generates drag forces which the fluid and thrombus exert on one another. These forces are computed from a permeability-porosity relation parameterized from experimental measurements. Basing this relation on measurements from occlusive thrombi formed in our flow chamber experiments, along with other physiological parameter values, the model produced stable dense thrombi on a similar timescale to the experiments. When we parameterized the permeability-porosity relation using lower permeabilities reported by others, bond formation was insufficient to balance drag forces on an early thrombus and keep it intact. Under high shear flow, soluble agonist released by platelets was limited to the thrombus and a boundary layer downstream, thus restricting thrombus growth into the vessel lumen. Adding to the model binding and activation of unactivated platelets through von Willebrand-factor-mediated processes allowed greater growth and made agonist-induced activation more effective.     

Platelet Transport Rates and Binding Kinetics at High Shear over a?Thrombus

Thrombus formation over a ruptured atherosclerotic plaque cap can occlude an artery with fatal consequences. We describe a computational model of platelet transport and binding to interpret rate-limiting steps seen in experimental thrombus formation over a collagen-coated stenosis. The model is used to compute shear rates in stenoses with growing boundaries. In the model, moving erythrocytes influence platelet transport based on shear-dependent enhanced diffusivity and a nonuniform platelet distribution. Adhesion is modeled as platelet-platelet binding kinetics. The results indicate that observed thrombus growth rates are limited by platelet transport to the wall for shear rates up to 6000 s⁻¹. Above 7000 s⁻¹, the thrombus growth rate is likely limited by binding kinetics (10⁻⁴ m/s). Thrombus growth computed from these rate-limiting steps match the thrombus location and occlusion times for experimental conditions if a lag time for platelet activation is included. Using fitted parameters, the model is then used to predict thrombus size and shape at a higher Reynolds number flow consistent with coronary artery disease.     

Spatial Distribution of Factor Xa,Thrombin, and Fibrin(ogen) on Thrombi at Venous Shear

Background

The generation of thrombin is a critical process in the formation of venous thrombi. In isolated plasma under static conditions, phosphatidylserine (PS)-exposing platelets support coagulation factor activation and thrombin generation; however, their role in supporting coagulation factor binding under shear conditions remains unclear. We sought to determine where activated factor X (FXa), (pro)thrombin, and fibrin(ogen) are localized in thrombi formed under venous shear.

Methodology/Principal Findings

Fluorescence microscopy was used to study the accumulation of platelets, FXa, (pro)thrombin, and fibrin(ogen) in thrombi formed in vitro and in vivo. Co-perfusion of human blood with tissue factor resulted in formation of visible fibrin at low, but not at high shear rate. At low shear, platelets demonstrated increased Ca²⁺ signaling and PS exposure, and supported binding of FXa and prothrombin. However, once cleaved, (pro)thrombin was observed on fibrin fibers, covering the whole thrombus. In vivo, wild-type mice were injected with fluorescently labeled coagulation factors and venous thrombus formation was monitored in mesenteric veins treated with FeCl₃. Thrombi formed in vivo consisted of platelet aggregates, focal spots of platelets binding FXa, and large areas binding (pro)thrombin and fibrin(ogen).

Conclusions/Significance

FXa bound in a punctate manner to thrombi under shear, while thrombin and fibrin(ogen) distributed ubiquitously over platelet-fibrin thrombi. During thrombus formation under venous shear, thrombin may relocate from focal sites of formation (on FXa-binding platelets) to dispersed sites of action (on fibrin fibers).     

Plant food delphinidin-3-glucoside significantly inhibits platelet activation and thrombosis: novel protective roles against cardiovascular diseases

Delphinidin-3-glucoside (Dp-3-g) is one of the predominant bioactive compounds of anthocyanins in many plant foods. Although several anthocyanin compounds have been reported to be protective against cardiovascular diseases (CVDs), the direct effect of anthocyanins on platelets, the key players in atherothrombosis, has not been studied. The roles of Dp-3-g in platelet function are completely unknown. The present study investigated the effects of Dp-3-g on platelet activation and several thrombosis models in vitro and in vivo. We found that Dp-3-g significantly inhibited human and murine platelet aggregation in both platelet-rich plasma and purified platelets. It also markedly reduced thrombus growth in human and murine blood in perfusion chambers at both low and high shear rates. Using intravital microscopy, we observed that Dp-3-g decreased platelet deposition, destabilized thrombi, and prolonged the time required for vessel occlusion. Dp-3-g also significantly inhibited thrombus growth in a carotid artery thrombosis model. To elucidate the mechanisms, we examined platelet activation markers via flow cytometry and found that Dp-3-g significantly inhibited the expression of P-selectin, CD63, CD40L, which reflect platelet α- and δ-granule release, and cytosol protein secretion, respectively. We further demonstrated that Dp-3-g downregulated the expression of active integrin αIIbβ3 on platelets, and attenuated fibrinogen binding to platelets following agonist treatment, without interfering with the direct interaction between fibrinogen and integrin αIIbβ3. We found that Dp-3-g reduced phosphorylation of adenosine monophosphate-activated protein kinase, which may contribute to the observed inhibitory effects on platelet activation. Thus, Dp-3-g significantly inhibits platelet activation and attenuates thrombus growth at both arterial and venous shear stresses, which likely contributes to its protective roles against thrombosis and CVDs.     

Importance of temporal flow gradients and integrin alphaIIbbeta3 mechanotransduction for shear activation of platelets

Disturbances of blood flow play an important role in promoting platelet activation and arterial thrombus formation in stenosed, injured, atherosclerotic arteries. To date, glycoprotein Ib (GPIb) has been considered the primary platelet mechanosensory receptor, responding to increased shear with enhanced adhesive and signaling function. We demonstrate here that von Willebrand factor-GPIb interaction is inefficient at inducing platelet activation even when platelets are exposed to very high wall shear stresses (60 dyn/cm(2)). Rapid platelet activation under flow was only observed under experimental conditions in which transiently adherent platelets were exposed to sudden accelerations in blood flow. Platelet responsiveness to temporal shear gradients was integrin alpha(IIb)beta(3)-dependent and occurred only on a von Willebrand factor substrate, as platelets forming integrin alpha(IIb)beta(3) adhesive contacts with immobilized fibrinogen were unresponsive to sudden increases in shear. The calcium response induced by temporal shear gradients was distinct from previously identified integrin alpha(IIb)beta(3) calcium responses in terms of its transient nature, its requirement for platelet co-stimulation by the P2Y(1) purinergic ADP receptor, and its dependence on the influx of extracellular calcium. Our studies demonstrate a key role for temporal shear gradients in promoting platelet activation. Moreover, they define for the first time the involvement of P2Y receptors in integrin mechanotransduction.     

Label-free multimodal quantitative imaging flow assay for intrathrombus formation in vitro

Microfluidics in vitro assays recapitulate a blood vessel microenvironment using surface-immobilized agonists under biofluidic flows. However, these assays do not quantify intrathrombus mass and activities of adhesive platelets at the agonist margin and use fluorescence labeling, therefore limiting clinical translation potential. Here, we describe a label-free multimodal quantitative imaging flow assay that combines rotating optical coherent scattering microscopy and quantitative phase microscopy. The combined imaging platform enables real-time evaluation of membrane fluctuations of adhesive-only platelets and total intrathrombus mass under physiological flow rates in vitro. We call this multimodal quantitative imaging flow assay coherent optical scattering and phase interferometry (COSI). COSI records intrathrombus mass to picogram accuracy and shape changes to a platelet membrane with high spatial-temporal resolution (0.4 μm/s) under physiological and pathophysiological fluid shear stress (1800 and 7500 s⁻¹). With COSI, we generate an axial slice of 4 μm from the coverslip surface, approximately equivalent to the thickness of a single platelet, which permits nanoscale quantification of membrane fluctuation (activity) of adhesive platelets during initial adhesion, spreading, and recruitment into a developing thrombus (mass). Under fluid shear, pretreatment with a broad range metalloproteinase inhibitor (250 μM GM6001) blocked shedding of platelet adhesion receptors that shown elevated adhesive platelet activity at average of 42.1 μm/s and minimal change in intrathrombus mass.     

PI 3-kinase p110beta: a new target for antithrombotic therapy

Platelet activation at sites of vascular injury is essential for the arrest of bleeding; however, excessive platelet accumulation at regions of atherosclerotic plaque rupture can result in the development of arterial thrombi, precipitating diseases such as acute myocardial infarction and ischemic stroke. Rheological disturbances (high shear stress) have an important role in promoting arterial thrombosis by enhancing the adhesive and signaling function of platelet integrin alpha(IIb)beta(3) (GPIIb-IIIa). In this study we have defined a key role for the Type Ia phosphoinositide 3-kinase (PI3K) p110beta isoform in regulating the formation and stability of integrin alpha(IIb)beta(3) adhesion bonds, necessary for shear activation of platelets. Isoform-selective PI3K p110beta inhibitors have been developed which prevent formation of stable integrin alpha(IIb)beta(3) adhesion contacts, leading to defective platelet thrombus formation. In vivo, these inhibitors eliminate occlusive thrombus formation but do not prolong bleeding time. These studies define PI3K p110beta as an important new target for antithrombotic therapy.     

A uniform‐shear rate microfluidic bioreactor for real‐time study of proplatelet formation and rapidly‐released platelets

Platelet transfusions, with profound clinical importance in blood clotting and wound healing, are entirely derived from human volunteer donors. Hospitals rely on a steady supply of donations, but these methods are limited by a 5‐day shelf life, the potential risk of contamination, and differences in donor/recipient histocompatibility. These challenges invite the opportunity to generate platelets ex vivo. Although much progress has been made in generating large numbers of culture‐derived megakaryocytes (Mks, the precursor cells to platelets), stimulating a high percentage of Mks to undergo platelet release remains a major challenge. Recent studies have demonstrated the utility of shear forces to enhance platelet release from cultured Mks. In this study, we performed a computational fluid dynamics (CFD) analysis of several published platelet microbioreactor systems, and used the results to develop a new 7‐µm slit bioreactor—with well‐defined flow patterns and uniform shear profiles. This uniform‐shear‐rate bioreactor (USRB‐7µm) permits real‐time visualization of the proplatelet (proPLT) formation process and the rapid‐release of individual platelet‐like‐particles (PLPs), which has been observed in vivo, but not previously reported for platelet bioreactors. We showed that modulating shear forces and flow patterns had an immediate and significant impact on PLP generation. Surprisingly, using a single flow instead of dual flows led to an unexpected six‐fold increase in PLP production. By identifying particularly effective operating conditions within a physiologically relevant environment, this USRB‐7µm will be a useful tool for the study and analysis of proPLT/PLP formation that will further understanding of how to increase ex vivo platelet release. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1614–1629, 2017     

Platelet adhesive dynamics. Part II: high shear-induced transient aggregation via GPIbalpha-vWF-GPIbalpha bridging

A three-dimensional multiscale computational model, platelet adhesive dynamics (PAD), is developed and applied in Part I and Part II articles to characterize and quantify key biophysical aspects of GPIbα-von-Willebrand-factor (vWF)-mediated interplatelet binding at high shear rates, a necessary and enabling step that initiates shear-induced platelet aggregation. In this article, an adhesive dynamics model of the transient aggregation of two unactivated platelets via GPIbα-vWF-GPIbα bridging is developed and integrated with the three-dimensional hydrodynamic flow model discussed in Part I. Platelet binding efficiencies predicted by PAD are in good agreement with platelet aggregation behavior observed experimentally, as documented in the literature. Deviations from average vWF ligand size or healthy GPIbα-vWF-A1 binding kinetics are observed in simulations to have significant effects on the dynamics of transient platelet aggregation, i.e., the efficiency of platelet aggregation and characteristics of bond failure, in ways that typify diseased conditions. The GPIbα-vWF-A1 bond formation rate is predicted to have piecewise linear dependence on the prevailing fluid shear rate, with a sharp transition in fluid shear dependency at 7200 s⁻¹. Interplatelet bond force-loading is found to be complex and highly nonlinear. These results demonstrate PAD as a powerful predictive modeling tool for elucidating platelet adhesive phenomena under flow.     

Hydrodynamic effects and receptor interactions of platelets and their aggregates in linear shear flow.

We have modeled platelet aggregation in a linear shear flow by accounting for two body collision hydrodynamics, platelet activation and receptor biology. Considering platelets and their aggregates as unequal-sized spheres with DLVO interactions (psi(platelet) = -15 mV, Hamaker constant = 10(-19) J), detailed hydrodynamics provided the flow field around the colliding platelets. Trajectory calculations were performed to obtain the far upstream cross-sectional area and the particle flux through this area provided the collision frequency. Only a fraction of platelets brought together by a shearing fluid flow were held together if successfully bound by fibrinogen cross-bridging GPIIb/IIIa receptors on the platelet surfaces. This fraction was calculated by modeling receptor-mediated aggregation using the formalism of Bell (Bell, G. I. 1979. A theoretical model for adhesion between cells mediated by multivalent ligands. Cell Biophys. 1:133-147) where the forward rate of bond formation dictated aggregation during collision and was estimated from the diffusional limited rate of lateral association of receptors multiplied by an effectiveness factor, eta, to give an apparent rate. For a value of eta = 0.0178, we calculated the overall efficiency (including both receptor binding and hydrodynamics effects) for equal-sized platelets with 50,000 receptors/platelet to be 0.206 for G = 41.9 s(-1), 0.05 for G = 335 s(-1), and 0.0086 for G = 1920 s(-1), values which are in agreement with efficiencies determined from initial platelet singlet consumption rates in flow through a tube. From our analysis, we predict that bond formation proceeds at a rate of approximately 0.1925 bonds/microm2 per ms, which is approximately 50-fold slower than the diffusion limited rate of association. This value of eta is also consistent with a colloidal stability of unactivated platelets at low shear rates. Fibrinogen was calculated to mediate aggregation quite efficiently at low shear rates but not at high shear rates. Although secondary collisions (an orbitlike trajectory) form only a small fraction of the total number of collisions, they become important at high shear rates (>750 s(-1)), as these are the only collisions that provide enough time to result in successful aggregate formation mediated by fibrinogen. The overall method provides a hydrodynamic and receptor correction of the Smoluchowski collision kernel and gives a first estimate of eta for the fibrinogen-GPIIb/IIIa cross-bridging of platelets. We also predict that secondary collisions extend the shear rate range at which fibrinogen can mediate successful aggregation.     

Pre-activated blood platelets and a pro-thrombotic phenotype in APP23 mice modeling Alzheimer's disease

Platelet activation and thrombus formation play a critical role in primary hemostasis but also represent a pathophysiological mechanism leading to acute thrombotic vascular occlusions. Besides, platelets modulate cellular processes including inflammation, angiogenesis and neurodegeneration. On the other hand, platelet activation and thrombus formation are altered in different diseases leading to either bleeding complications or pathological thrombus formation. For many years platelets have been considered to play a role in neuroinflammatory diseases such as Alzheimer's disease (AD). AD is characterized by deposits of amyloid-β (Aβ) and strongly related to vascular diseases with platelets playing a critical role in the progression of AD because exposure of platelets to Aβ induces platelet activation, platelet Aβ release, and enhanced platelet adhesion to collagen in vitro and at the injured carotid artery in vivo. However, the molecular mechanisms and the relation between vascular pathology and amyloid-β plaque formation in the pathogenesis of AD are not fully understood. Compelling evidence is suggestive for altered platelet activity in AD patients. Thus we analyzed platelet activation and thrombus formation in aged AD transgenic mice (APP23) known to develop amyloid-β deposits in the brain parenchyma and cerebral vessels. As a result, platelets are in a pre-activated state in blood of APP23 mice and showed strongly enhanced integrin activation, degranulation and spreading kinetics on fibrinogen surfaces upon stimulation. This enhanced platelet signaling translated into almost unlimited thrombus formation on collagen under flow conditions in vitro and accelerated vessel occlusion in vivo suggesting that these mice are at high risk of arterial thrombosis leading to cerebrovascular and unexpectedly to cardiovascular complications that might be also relevant in AD patients.     

Activation and extinction models for platelet adhesion

Adherent platelets are an important part of both thrombus formation and in certain stages of atherogenesis. Platelets can be activated by potent chemicals released from adherent platelets and adhere far more readily than unactivated ones. An analytical and numerical model is presented utilising high Peclet number for the activation and adhesion of platelets in shear flows. The model uses a similarity transformation, which characterises the relationship between convective, diffusive transport and the bulk platelet activating reaction mechanism. A first order surface reaction mechanism is used to model platelet adhesion at the wall (cell) surface. The reduced Damk?hler number, M, characterises the importance of the bulk reaction and includes both convective and diffusive terms. For a high rate of blood flow (M-->0) the activation of platelets can effectively be terminated. In contrast, for (M-->infinity) an inner layer of activated platelets exists with an infinitesimally thin reaction sheet separating activated and non-activated platelets. This characterisation by the Damk?hler number highlights results found clinically, in that thrombus forms in areas of low shear (high M) and in some cases an increased blood flow (low M) can inhibit the activation of platelets completely. The model shows the critical balance that exists between convection, diffusion and reaction.