Catechol-functionalized chitosan/pluronic hydrogels for tissue adhesives and hemostatic materials

Bioinspired from adhesion behaviors of mussels, injectable and thermosensitive chitosan/Pluronic composite hydrogels were synthesized for tissue adhesives and hemostatic materials. Chitosan conjugated with multiple catechol groups in the backbone was cross-linked with terminally thiolated Pluronic F-127 triblock copolymer to produce temperature-sensitive and adhesive sol-gel transition hydrogels. A blend mixture of the catechol-conjugated chitosan and the thiolated Pluronic F-127 was a viscous solution state at room temperature but became a cross-linked gel state with instantaneous solidification at the body temperature and physiological pH. The adhesive chitosan/Pluronic injectable hydrogels with remnant catechol groups showed strong adhesiveness to soft tissues and mucous layers and also demonstrated superior hemostatic properties. These chitosan/Pluronic hydrogels are expected to be usefully exploited for injectable drug delivery depots, tissue engineering hydrogels, tissue adhesives, and antibleeding materials.     

Hydrogel composed of acrylic coumarin and acrylic Pluronic F-127 and its photo- and thermo-responsive release property

Hydrogels comprising acrylic coumarin (AC) and acrylic Pluronic F-127 (APF) were prepared by a free radical reaction and its photo- and thermal-responsive release property was investigated using methylene blue as a solute. AC and APF were prepared successfully, confirmed by ¹H NMR spectroscopy. The molar ratio of Pluronic F-127 chain to vinyl group of APF was 1:1.3, suggesting that diacrylic Pluronic F-127 which could act as a cross-linker for the formation of polymer networks was produced. The coumaryl groups of AC were dimerized as much as 60.1% by 2 h-UV irradiation. On the DSC thermogram, APF exhibited its melting point around 55.4°C, about 0.9°C lower than the melting point of Pluronic F-127. The gelling temperature of Pluronic F-127 solution (25% (w/v)) was about 40°C, determined by a viscometric method. The swelling ratio of the hydrogels increased up to greater than 8 in 30 min. The maximum release degree at 23 and 50°C of dye loaded in the hydrogels was suppressed by UV irradiation, possibly because of the photo-dimerization of coumaryl groups. The release degree at 50°C of dye loaded in the UV-treated hydrogels was lower as the content of APF was higher, possibly because the thermally induced gelation of the polymer chains could suppress the payload release from the hydrogels.     

Evaluation of a Collagen-Chitosan Hydrogel for Potential Use as a Pro-Angiogenic Site for Islet Transplantation

Islet transplantation to treat type 1 diabetes (T1D) has shown varied long-term success, due in part to insufficient blood supply to maintain the islets. In the current study, collagen and collagen:chitosan (10:1) hydrogels, +/- circulating angiogenic cells (CACs), were compared for their ability to produce a pro-angiogenic environment in a streptozotocin-induced mouse model of T1D. Initial characterization showed that collagen-chitosan gels were mechanically stronger than the collagen gels (0.7kPa vs. 0.4kPa elastic modulus, respectively), had more cross-links (9.2 vs. 7.4/µm²), and were degraded more slowly by collagenase. After gelation with CACs, live/dead staining showed greater CAC viability in the collagen-chitosan gels after 18h compared to collagen (79% vs. 69%). In vivo, collagen-chitosan gels, subcutaneously implanted for up to 6 weeks in a T1D mouse, showed increased levels of pro-angiogenic cytokines over time. By 6 weeks, anti-islet cytokine levels were decreased in all matrix formulations ± CACs. The 6-week implants demonstrated increased expression of VCAM-1 in collagen-chitosan implants. Despite this, infiltrating vWF⁺ and CXCR4⁺ angiogenic cell numbers were not different between the implant types, which may be due to a delayed and reduced cytokine response in a T1D versus non-diabetic setting. The mechanical, degradation and cytokine data all suggest that the collagen-chitosan gel may be a suitable candidate for use as a pro-angiogenic ectopic islet transplant site.     

Antibiofilm and Antimicrobial Efficacy of DispersinB®-KSL-W Peptide-Based Wound Gel Against Chronic Wound Infection Associated Bacteria

The medical importance of bacterial biofilms has increased with the recognition of biofilms as one of the major contributors to the slow or non-healing chronic wounds such as diabetic foot ulcers, venous leg ulcers, and pressure ulcers. Being a protected community of microorganisms, biofilms are notoriously refractory to antibiotic treatments. As the conventional treatment modalities have proven ineffective, this study provides the in vitro evidence to support the use of a novel combination of DispersinB^® antibiofilm enzyme that inhibits biofilm formation and disperses preformed biofilm, and thus making the biofilm bacteria more susceptible to a broad-spectrum KSL-W antimicrobial peptide. The combination of DispersinB^® and KSL-W peptide showed synergistic antibiofilm and antimicrobial activity against chronic wound infection associated biofilm-embedded bacteria such as Methicillin-resistant Staphylococcus aureus (MRSA), Staphylococcus epidermidis, Coagulase-negative Staphylococci (CoNS), and Acinetobacter baumannii. In addition, the wound gel formulation comprising DispersinB^®, KSL-W peptide, and a gelling agent Pluronic F-127 showed a broad-spectrum and enduring antimicrobial activity against test organisms. Furthermore, as compared to commercial wound gel Silver-Sept?, DispersinB^®-KSL-W peptide-based wound gel was significantly more effective in inhibiting the biofilm-embedded MRSA, S. epidermidis, CoNS, Vancomycin-resistant Enterococci, A. baumannii, Klebsiella pneumoniae, and Pseudomonas aeruginosa (P < 0.05). Thus, this study provides promising evidence for the potential application of antibiofilm-antimicrobial DispersinB^®-KSL-W wound gel in chronic wound management.     

Formulation Development and Evaluation of Innovative Two-Polymer (SR-2P) Bioadhesive Vaginal Gel

The main objective of this investigation was to study the feasibility of developing a vaginal bioadhesive microbicide using a SRI’s proprietary two-polymer gel platform (SR-2P). Several formulations were prepared with different combinations of temperature-sensitive polymer (Pluronic® F-127) and mucoadhesive polymer (Noveon® AA-1), producing gels of different characteristics. Prototype polymeric gels were evaluated for pH, osmolality, buffering capacity, and viscosity under simulated vaginal semen dilutions, and bioadhesivity using ex vivo mini pig vaginal tissues and texture analyzer. The pH of the polymeric gel formulations ranged from 5.1 to 6.4; the osmolality varied from 13 to 173 mOsm. Absolute viscosity ranged from 513 to 3,780 cPs, and was significantly reduced (1.5- to 3-fold) upon incubation with simulated vaginal and semen fluid mixture. Among the tested gels (indicated in the middle row as a molar ratio of a mixture of Noveon vs. Pluronic), only SR-2P retained gel structure upon dilution with simulated fluids and mild simulated coital stress. The pH of the SR-2P gel was maintained at about 4.6 in simulated vaginal fluid and also showed high peak force of adhesion in mini pig vaginal tissue. Furthermore, SR-2P gel caused no or only minimal irritation in a mouse vaginal irritation model. The results of this preliminary study demonstrated the potential application of SR-2P gel as a vaginal microbicide vehicle for delivery of anti-HIV agents.

General ligands in affinity chromatography. Cofactor–substrate elution of enzymes bound to the immobilized nucleotides adenosine 5′-monophosphate and nicotinamide–adenine dinucleotide

1. Two different gels have been prepared suitable for the separation of a number of enzymes, in particular NAD⁺-dependent dehydrogenases, by affinity chromatography. For both the matrix used was Sepharose 4B. For preparation (a), NAD⁺–Sepharose, 6-aminohexanoic acid has been coupled to the gel by the cyanogen bromide method and then NAD⁺ was attached by using dicyclohexylcarbodi-imide; for preparation (b), AMP–Sepharose, N⁶-(6-aminohexyl)-AMP has been coupled directly to cyanogen bromide-activated gel. 2. Affinity columns of both gels retain only the two enzymes when a mixture of bovine serum albumin, lactate dehydrogenase and glyceraldehyde 3-phosphate dehydrogenase is applied. Subsequent elution with the cofactor NAD⁺ yields glyceraldehyde 3-phosphate dehydrogenase whereas lactate dehydrogenase is eluted by applying the same molarity of the reduced cofactor. 3. The binding of both glyceraldehyde 3-phosphate dehydrogenase and lactate dehydrogenase to the gel tested, AMP–Sepharose, is strong enough to resist elution by gradients of KCl of up to at least 0.5m. A 0.0–0.15m gradient of the competitive inhibitor salicylate, however, elutes both enzymes efficiently and separately. 4. The elution efficiency of lactate dehydrogenase from AMP–Sepharose has been examined by using a series of eluents under comparable conditions of concentration etc. The approximate relative efficiencies are: 0 (lactate); 0 (lactate+semicarbazide); 0 (0.5mm-NAD⁺); 80 (lactate+NAD⁺); 95 (lactate+semicarbazide+NAD⁺); 100 (0.5mm-NADH). 5. All contaminating lactate dehydrogenase activity can be removed from commercially available crude pyruvate kinase in a single-step procedure by using AMP–Sepharose.     

In vitro and in vivo release of albumin using a biodegradable MPEG-PCL diblock copolymer as an in situ gel-forming carrier

An MPEG-PCL diblock copolymer was synthesized as an in situ gel carrier, and its phase transition behavior in aqueous solutions was examined. For comparison, aqueous solutions of Pluronic F-127, a widely used injectable gel-forming solution, were also studied. Both MPEG-PCL copolymer and Pluronic aqueous solutions were sols at room temperature. As the temperature was increased above room temperature, the diblock copolymer and Pluronic solutions underwent a sol-to-gel phase transition, which manifested as an increase in viscosity indicative of the formation of a gel. All of the copolymer solutions became gels at body temperature, although the gel viscosity increased with the increasing concentration of the MPEG-PCL diblock copolymer in the solution. In in vitro experiments, in which the gels were exposed to PBS, the MPEG-PCL gels maintained their structural integrity for more than 28 days, whereas the Pluronic gel disappeared within 2 days. The same results were observed when the polymer solutions were subcutaneously injected into rats. The MPEG-PCL gels maintained their structural integrity longer than 30 days, while the Pluronic gel could not be observed after 2 days. The ability of the gels as drug carriers was studied by measuring the release of fluorescein isothiocyanate-labeled bovine serum albumin (BSA-FITC) from MPEG-PCL diblock copolymer gels in vitro as well as in vivo. In vitro, BSA release was sustained above 20 days, with a greater release at lower diblock copolymer concentration; by contrast, Pluronic gels exhibited almost complete release of BSA-FITC within 1 day. When the BSA-FITC-loaded diblock copolymer and Pluronic solutions were subcutaneously injected into rats, they immediately transformed into a gel. In vivo, sustained release of BSA-FITC over 30 days was observed from the MPEG-PCL gel, whereas BSA-FITC release from the Pluronic gel ceased within 3 days. Collectively, the present findings show that MPEG-PCL diblock copolymer solutions are thermo-responsive and maintain their structural integrity under physiological conditions, indicating that they are suitable for use as injectable drug carriers.     

A correlation between mechanical and electrical properties of the synthetic hydrogel chosen as an experimental model of cytoskeleton

The correlation between the electrochemical (Donnan) potential and volume swelling was studied for synthetic polyelectrolyte hydrogels considered as models of cytoskeleton gel-forming biopolymers. Hydrogels involving polyacrylic and polymethacrylic acids with varying network density were synthesized by a radical polymerization in aqueous solution. Electrical charge was introduced into the gel network by partial neutralization of monomer acids with several alkali and alkali earth (hydr)oxides. The electrochemical (Donnan) potential of synthetic gels was determined using conventional microelectrode tools for cell potential determination. It was demonstrated that the negative electrical potential of many anionic gels with various charges and network densities decreased with the decrease of equilibrium swelling, i.e., with the decrease in water content in the gel. It was shown that a drastic phase transition in the gel structure from a swollen to a compressed state induced by K⁺/Ca²⁺ exchange is accompanied by an analogous decrease in the absolute Donnan potential of the gels. A kinetic study demonstrated that the gel volume changed ahead of its electrical potential. This suggests that the volume phase transition in gel is the main cause of the electrical response. A similarity between the swelling/compression transition in synthetic gels and the volume changes in the cytoskeleton in the vicinity of the cell membrane was demonstrated. Based on the universal analogy between the properties of synthetic and natural polymer gels, a possible involvement of swelling of the gel-like cytoskeleton structures in electrical regulation in the cell was postulated.     

Variability in secondary structure of the antimicrobial peptide Cateslytin in powder,solution, DPC micelles and at the air–water interface

Cateslytin (bCGA ³⁴⁴RSMRLSFRARGYGFR³⁵⁸), a five positively charged 15 amino-acid residues arginine-rich antimicrobial peptide, was synthesized using a very efficient procedure leading to high yields and to a 99% purity as determined by HPLC and mass spectrometry. Circular dichroism, polarized attenuated total reflectance fourier transformed infrared, polarization modulation infrared reflection Absorption spectroscopies and proton two-dimensional NMR revealed the flexibility of such a peptide. Whereas being mostly disordered as a dry powder or in water solution, the peptide acquires a α-helical character in the “membrane mimicking” solvent trifuoroethanol. In zwitterionic micelles of dodecylphophatidylcholine the helical character is retained but to a lesser extent, the peptide returning mainly to its disordered state. A β-sheet contribution of almost 100% is detected at the air–water interface. Such conformational plasticity is discussed regarding the antimicrobial action of Cateslytin. Presented at the joint biannual meeting of the SFB-GEIMM-GRIP, Anglet France, 14–19 October, 2006.     

Oxidation of catechol in plants. 3. Purification and properties of the diphenylene dioxide 2,3-quinone-forming enzyme system from Tecoma leaves

In attempting to determine the nature of the enzyme system mediating the conversion of catechol to diphenylenedioxide 2,3-quinone, in Tecoma leaves, further purification of the enzyme was undertaken. The crude enzyme from Tecoma leaves was processed further by protamine sulfate precipitation, positive adsorption on tricalcium phosphate gel, and elution and chromatography on DEAE-Sephadex. This procedure yielded a 120-fold purified enzyme which stoichiometrically converted catechol to diphenylenedioxide 2,3-quinone. The purity of the enzyme system was assessed by polyacrylamide gel electrophoresis. The approximate molecular weight of the enzyme was assessed as 200,000 by gel filtration on Sephadex G-150. The enzyme functioned optimally at pH 7.1 and at 35 °C. The K_m for catechol was determined as 4 × 10^?4m. The enzyme did not oxidize o-dihydric phenols other than catechol and it did not exhibit any activity toward monohydric and trihydric phenols and flavonoids. Copper-chelating agents did not inhibit the enzyme activity. Copper could not be detected in the purified enzyme preparations. The purified enzyme was not affected by extensive dialysis against copper-complexing agents. It did not show any peroxidase activity and it was not inhibited by catalase. Hydrogen peroxide formation could not be detected during the catalytic reaction. The enzymatic conversion of catechol to diphenylenedioxide 2,3-quinone by the purified Tecoma leaf enzyme was suppressed by such reducing agents as GSH and cysteamine. The purified enzyme was not sensitive to carbon monoxide. It was not inhibited by thiol inhibitors. The Tecoma leaf was found to be localized in the soluble fraction of the cell. Treatment of the purified enzyme with acid, alkali, and urea led to the progressive denaturation of the enzyme.     

Study In Vivo Intraocular Biocompatibility of In Situ Gelation Hydrogels: Poly(2-Ethyl Oxazoline)-Block-Poly(ε-Caprolactone)-Block-Poly(2-Ethyl Oxazoline) Copolymer,Matrigel and Pluronic F127

The long term in vivo biocompatibility is an essential feature for the design and development of sustained drug release carriers. In the recent intraocular drug delivery studies, hydrogels were suggested as sustained release carriers. The biocompatibility test for these hydrogels, however, was commonly performed only through in vitro cell culture examination, which is insufficient before the clinical applications. We compared three thermosensitive hydrogels that have been suggested as the carriers for drugs by their gel-solution phase-change properties. A new block terpolymer (PEOz-PCL-PEOz, ECE) and two commercial products (Matrigel® and Pluronic F127) were studied. The results demonstrated that the ocular media remained translucent for ECE and Pluronic F127 in the first 2 weeks, but cataract formation for Matrigel occurred in 2 weeks and for Pluronic F127 in 1 month, while turbid media was observed for both Matrigel and Pluronic F127 in 2 months. The electrophysiology examinations showed significant neuroretinal toxicity of Matrigel and Pluronic F127 but good biocompatibility of ECE. The neuroretinal toxicity of Matrigel and Pluronic F127 and superior biocompatibility of ECE hydrogel suggests ECE as more appropriate biomaterial for use in research and potentially in intraocular application.     

Pericellular Conditions Regulate Extent of Cell-Mediated Compaction of Collagen Gels

Cell-mediated compaction of the extracellular matrix (ECM) plays a critical role in tissue engineering, wound healing, embryonic development, and many disease states. The ECM is compacted as a result of cellular traction forces. We hypothesize that a cell mechanically remodels the nearby ECM until some target conditions are obtained, and then the cell stops compacting. A key feature of this hypothesis is that ECM compaction primarily occurs in the pericellular region and the properties of the ECM in the pericellular region govern cellular force generation. We developed a mathematical model to describe the amount of macroscopic compaction of cell-populated collagen gels in terms of the initial cell and collagen densities, as well as the final conditions of the pericellular environment (defined as the pericellular volume where the collagen is compacted (V^∗) and the mass of collagen within this volume (m^∗)). This model qualitatively predicts the effects of varying initial cell and collagen concentrations on the extent of gel compaction, and by fitting V^∗ and m^∗, provides reasonable quantitative agreement with the extent of gel compaction observed in experiments with endothelial cells and fibroblasts. Microscopic analysis of compacted gels supports the assumption that collagen compaction occurs primarily in the pericellular environment.     

Enzymatic preparation of streptavidin-immobilized hydrogel using a phenolated linear poly(ethylene glycol)

Hybrid gels constructed from proteins and polymers have attracted a wide range of attention in the field of biomedicine and bioengineering. We report herein the enzymatic preparation of polymer–protein hybrid hydrogels composed of terminally bis-functionalized linear poly(ethylene glycol) (PEG) and streptavidin (SA). PEG was conjugated with tyramine to introduce terminal phenolic hydroxyl (Ph-OH) groups. A peptide tag containing a tyrosine residue (G₄Y-tag) was genetically introduced at the C-terminus of SA. The Ph-OH-modified PEG and G₄Y-tagged SA (SA-G₄Y) were treated by horseradish peroxidase (HRP) in the presence of hydrogen peroxide (H₂O₂) to yield (PEG-Ph-OH)–(SA-G₄Y) hybrid gels. Biotinylated enhanced green fluorescent protein (biotin-EGFP) was selectively captured in the obtained hybrid gels, indicating that SA-G₄Y retained its biological function. The amount of biotin-EGFP immobilized in the hybrid gels depended on the concentration of SA-G₄Y. In addition, biotinylated bacterial alkaline phosphatase (biotin-BAP) was immobilized in the hybrid gel. The immobilized biotin-BAP exhibited more than 95% of the initial activity after 5 rounds of recycling. The results suggest the facile functionalization of the hybrid gel with a variety of biotinylated functional molecules.     

Mucoadhesive, thermosensitive, prolonged-release vaginal gel for clotrimazole: β-cyclodextrin complex

The purpose of this study was to achieve a better therapeutic efficacy and patient compliance in the treatment for vaginitis. Clotrimazole (1%) has been formulated in a vaginal gel using the thermosensitive polymer Pluronic F127 (20%) together with mucoadhesive polymers such as Carbopol 934 and hydroxypropylmethylcellulose (0.2% for both). To increase its aqueous solubility., clotrimazole was incorporated as its inclusion complex with 1∶1 molar ratio with β-cyclodextrin. The inclusion complex was thoroughly characterized using various techniques, including ¹H NMR spectroscopy, FT IR spectrophotometry, differential scanning calorimetry, scanning electron microscopy, phase solubility studies, and determination of stability constant (k_1∶1). The gelation temperature and rheological behavior of different formulations at varying temperatures were measured. In vitro release profiles of the gels were determined in pH 5.5 citrate buffer. It was observed that complexation with cyclodextrin slowed down the release of clotrimazole considerably. Carbopol 934, on the other hand, was found to interact with β-cyclodextrin, inducing precipitation. As far as rheological properties are concerned, thermosensitive in situ gelling was obtained with formulations containing drug: cyclodextrin complex rather than with free drug. Thus, the optimum formulation for a controlled-release thermosensitive and mucoadhesive vaginal gel was determined to be clotrimazole: β-cyclodextrin 1% with 0.2% hydroxypropylmethylcellulose in Pluronic F127 gel (20%) providing continuous and prolonged release of active material above MIC values.     

The pseudokinase NIPI-4 is a novel regulator of antimicrobial peptide gene expression

Hosts have developed diverse mechanisms to counter the pathogens they face in their natural environment. Throughout the plant and animal kingdoms, the up-regulation of antimicrobial peptides is a common response to infection. In C. elegans, infection with the natural pathogen Drechmeria coniospora leads to rapid induction of antimicrobial peptide gene expression in the epidermis. Through a large genetic screen we have isolated many new mutants that are incapable of upregulating the antimicrobial peptide nlp-29 in response to infection (i.e. with a Nipi or ‘no induction of peptide after infection’ phenotype). More than half of the newly isolated Nipi mutants do not correspond to genes previously associated with the regulation of antimicrobial peptides. One of these, nipi-4, encodes a member of a nematode-specific kinase family. NIPI-4 is predicted to be catalytically inactive, thus to be a pseudokinase. It acts in the epidermis downstream of the PKC∂ TPA-1, as a positive regulator of nlp antimicrobial peptide gene expression after infection. It also controls the constitutive expression of antimicrobial peptide genes of the cnc family that are targets of TGFß regulation. Our results open the way for a more detailed understanding of how host defense pathways can be molded by environmental pathogens.     

Structural and mechanical properties of UV-photo-cross-linked poly(N-vinyl-2-pyrrolidone) hydrogels

Biocompatible poly( N-vinyl-2-pyrrolidone) (PVP) hydrogels have been produced by UV irradiation of aqueous polymer mixtures, using a high-pressure mercury lamp. The resulting materials have been characterized by a combination of experimental techniques, including rheology, small-angle neutron scattering (SANS), electron paramagnetic resonance (EPR), and pulsed gradient spin-echo nuclear magnetic resonance (PGSE-NMR), to put in evidence the relationship between the microstructural properties and the macrofunctional behavior of the gels. Viscoelastic measurements showed that UV photo-cross-linked PVP hydrogels present a strong gel mechanical behavior and viscoelastic moduli values similar to those of biological gels. The average distance between the cross-linking points of the polymer network was estimated from the hydrogels elastic modulus. However, SANS measurements showed that the network microstructure is highly inhomogeneous, presenting polymer-rich regions more densely cross-linked, surrounded by a water-rich environment. EPR and PGSE-NMR data further support the existence of these water-rich domains. Inclusion of a third component, such as glycerol, in the PVP aqueous mixture to be irradiated has been also investigated. A small amount of glycerol (<3% w/w) can be added keeping satisfactory properties of the hydrogel, while higher amounts significantly affect the cross-linking process.     

Interactions of an anionic antimicrobial peptide with Staphylococcus aureus membranes

The antimicrobial activity of the anionic peptide, AP1 (GEQGALAQFGEWL), was investigated. AP1 was found to kill Staphylococcus aureus with an MLC of 3 mM and to induce maximal surface pressure changes of 3.8 mN m⁻¹ over 1200 s in monolayers formed from lipid extract of S. aureus membranes. FTIR spectroscopy showed the peptide to be α-helical (100%) in the presence of vesicles formed from this lipid extract and to induce increases in their fluidity (Δν circa 0.5 cm⁻¹). These combined data show that AP1 is able to function as an α-helical antimicrobial peptide against Gram-positive bacteria and suggest that the killing mechanism used by the peptide involves interactions with the membrane lipid headgroup region. Moreover, this killing mechanism differs strongly from that previously reported for AP1 against Gram-negative bacteria, indicating the importance of considering the effects of membrane lipid composition when investigating the structure/function relationships of antimicrobial peptides.     

Characterization of native and histidine-tagged deoxyxylulose 5-phosphate reductoisomerase from the cyanobacterium Synechocystis sp. PCC6803

The dxr gene encoding the 1-deoxy-d-xylulose 5-phosphate reductoisomerase (DXR) from the cyanobacterium Synechocystis sp. PCC6803 was expressed in Escherichia coli to produce both the native and N-terminal histidine-tagged forms of DXR. The enzymes were purified from the cell extracts using either anion exchange chromatography or metal affinity chromatography and gel filtration. The purified recombinant native and histidine-tagged enzymes each displayed a single band on sodium dodecyl sulfate–polyacrylamide gel electrophoresis (SDS-PAGE) gels, corresponding to the calculated subunit molecular weights of 42,500 and 46,700, respectively. By native PAGE, both enzymes were dimers under reducing conditions. The kinetic properties for the enzymes were characterized and only minor variations were observed, demonstrating that the N-terminal histidine tag does not greatly affect the activity of the enzyme. Both enzymes had similar properties to previously characterized reductoisomerases from other sources. The K_m's for the metal ions Mn²⁺, Mg²⁺, and Co²⁺ were determined for native DXR for the first time, with the K_m for Mg²⁺ being approximately 200-fold higher than the K_m's for Mn²⁺ and Co²⁺.     

Utilisation des gels de polymères MAGIC pour la dosimétrie d’une source non scellée d’yttrium 90

Polymer gels are relative chemical dosimeters. They allow to access to three-dimensional dose distribution. The aim of this study has been to investigate the preparation and the use of a polymer gel with a tissue equivalent density known as MAGIC gel from magnetic resonance imaging and x-ray computed tomography for non-sealed source dosimetry. This kind of gel is “normoxic” because it can be manufactured and used in normal room atmosphere. In the first part of this study, its accuracy and sensibility were studied using external beam irradiation by photons. Spin-spin relaxation rate (R₂) and Computed Tomography (CT) number had been used to record gel responses. Using the same manufacture process, radiolabelled gels composed of 95% MAGIC gel and 5% of ⁹⁰Y termed ⁹⁰Y-MAGIC₉₅, with varying activity ranged from 0 to 30 MBq were made. In case of photon external beam irradiation, a linear response is observed whatever the calibration method and the imaging system used (the correlation coefficient r² > 0.98 in all cases). ⁹⁰Y-MAGIC₉₅ radiolabelled gel responses were recorded after 28, 76 and 124 h. The R₂/dose curves are not linear; three phases can be described, the first being linear with a slow slope (0.14 s⁻¹ Gy⁻¹ instead of 0.41 s⁻¹ Gy⁻¹ for external beam irradiation of the same gel batch). This study shows safety of radiolabelled MAGIC gels manufacturing process and their large dosimetric feasibility. ⁹⁰Y-MAGIC₉₅ gel response appears to be reproducible and related to the absorbed dose, thus this gel is a promising tool for non-sealed source dosimetry.     

Effect of inorganic salts and glucose additives on dose–response,melting point and mass density of genipin gel dosimeters

Genipin gel dosimeters are hydrogels infused with a radiation-sensitive material which yield dosimetric information in three dimensions (3D). The effect of inorganic salts and glucose on the visible absorption dose–response, melting points and mass density of genipin gel dosimeters has been experimentally evaluated using 6-MV LINAC photons. As a result, the addition of glucose with optimum concentration of 10% (w/w) was found to improve the thermal stability of the genipin gel and increase its melting point (T_m) by 6 °C accompanied by a slight decrease of dose–response. Furthermore, glucose helps to adjust the gel mass density to obtain the desired tissue-equivalent properties. A drop of T_m was observed when salts were used as additives. As the salt concentration increased, gel T_m decreased. The mass density and melting point of the genipin gel could be adjusted using different amounts of glucose that improved the genipin gel suitability for 3D dose measurements without introducing additional toxicity to the final gel.