Dimeric SecA couples the preprotein translocation in an asymmetric manner

The Sec translocase mediates the post-translational translocation of a number of preproteins through the inner membrane in bacteria. In the initiatory translocation step, SecB targets the preprotein to the translocase by specific interaction with its receptor SecA. The latter is the ATPase of Sec translocase which mediates the post-translational translocation of preprotein through the protein-conducting channel SecYEG in the bacterial inner membrane. We examined the structures of Escherichia coli Sec intermediates in solution as visualized by negatively stained electron microscopy in order to probe the oligomeric states of SecA during this process. The symmetric interaction pattern between the SecA dimer and SecB becomes asymmetric in the presence of proOmpA, and one of the SecA protomers predominantly binds to SecB/proOmpA. Our results suggest that during preprotein translocation, the two SecA protomers are different in structure and may play different roles.     

Preprotein transfer to the Escherichia coli translocase requires the co-operative binding of SecB and the signal sequence to SecA

In Escherichia coli , precursor proteins are targeted to the membrane-bound translocase by the cytosolic chaperone SecB. SecB binds to the extreme carboxy-terminus of the SecA ATPase translocase subunit, and this interaction is promoted by preproteins. The mutant SecB proteins, L75Q and E77K, which interfere with preprotein translocation in vivo , are unable to stimulate in vitro translocation. Both mutants bind proOmpA but fail to support the SecA-dependent membrane binding of proOmpA because of a marked reduction in their binding affinities for SecA. The stimulatory effect of preproteins on the interaction between SecB and SecA exclusively involves the signal sequence domain of the preprotein, as it can be mimicked by a synthetic signal peptide and is not observed with a mutant preprotein (Δ8proOmpA) bearing a non-functional signal sequence. Δ8proOmpA is not translocated across wild-type membranes, but the translocation defect is suppressed in inner membrane vesicles derived from a prlA4 strain. SecB reduces the translocation of Δ8proOmpA into these vesicles and almost completely prevents translocation when, in addition, the SecB binding site on SecA is removed. These data demonstrate that efficient targeting of preproteins by SecB requires both a functional signal sequence and a SecB binding domain on SecA. It is concluded that the SecB–SecA interaction is needed to dissociate the mature preprotein domain from SecB and that binding of the signal sequence domain to SecA is required to ensure efficient transfer of the preprotein to the translocase.     

The molecular chaperone SecB is released from the carboxy-terminus of SecA during initiation of precursor protein translocation.

The chaperone SecB keeps precursor proteins in a translocation-competent state and targets them to SecA at the translocation sites in the cytoplasmic membrane of Escherichia coli. SecA is thought to recognize SecB via its carboxy-terminus. To determine the minimal requirement for a SecB-binding site, fusion proteins were created between glutathione-S-transferase and different parts of the carboxy-terminus of SecA and analysed for SecB binding. A strikingly short amino acid sequence corresponding to only the most distal 22 aminoacyl residues of SecA suffices for the authentic binding of SecB or the SecB-precursor protein complex. SecAN880, a deletion mutant that lacks this highly conserved domain, still supports precursor protein translocation but is unable to bind SecB. Heterodimers of wild-type SecA and SecAN880 are defective in SecB binding, demonstrating that both carboxy-termini of the SecA dimer are needed to form a genuine SecB-binding site. SecB is released from the translocase at a very early stage in protein translocation when the membrane-bound SecA binds ATP to initiate translocation. It is concluded that the SecB-binding site on SecA is confined to the extreme carboxy-terminus of the SecA dimer, and that SecB is released from this site at the onset of translocation.     

以SecA蛋白为“动力泵”的细菌Sec蛋白转运途径

细菌细胞中,三分之一的蛋白质是在合成后被转运到细胞质外才发挥功能的.其中大多数蛋白是通过Sec途径(即分泌途径secretion pathway)进行跨膜运动的.Sec转运酶是一个多组分的蛋白质复合体,膜蛋白三聚体SecYEG及水解ATP的动力蛋白SecA构成了Sec转运酶的核心.整合膜蛋白SecD,SecF和vajC形成了一个复合体亚单位,可与SecYEG相连并稳定SecA蛋白的膜结合形式.SecB是蛋白质转运中的伴侣分子,可以和很多蛋白质前体结合.SecM是由位于secA基因上游的secM基因编码的,可调节SecA蛋白的合成量,维持细胞在不同环境条件下的正常生长.新生肽链的信号肽被高度保守的SRP特异性识别.伴侣分子SecB通过与细胞膜上的SecA二聚体特异性结合将蛋白质前体引导至Sec转运途径,起始转运过程.结合蛋白质前体的SecA与组成转运通道的SecYEG复合体具有较高的亲和性.SecA经历插入和脱离细胞内膜SecYEG通道的循环,为转运提供所需的能量,每一次循环可推动20多个氨基酸的连续跨膜运动.     

The binding cascade of SecB to SecA to SecY/E mediates preprotein targeting to the E. coli plasma membrane

The export of many E. coli proteins such as proOmpA requires the cytosolic chaperone SecB and the membrane-bound preprotein translocase. Translocase is a multisubunit enzyme with the SecA protein as its peripheral membrane domain and the SecY/E protein as its integral domain. SecB, by binding to proOmpA in the cytosol, prevents its aggregation or association with membranes at nonproductive sites. The SecA receptor binds the proOmpA-SecB complex (Kd approximately 6 x 10(-8) M) through direct recognition of both the SecB (Kd approximately 2 x 10(-7) M) as well as the leader and mature domains of the precursor protein. SecB has a dual function in stabilizing the precursor and in passing it on to membrane-bound SecA, the next step in the pathway. SecA itself is bound to the membrane by its affinity (Kd approximately 4 x 10(-8) M) for SecY/E and for acidic lipids. The functions of SecB and SecA as a two-stage receptor system are linked by their affinity for each other.     

Indecisive M13 procoat protein mutants bind to SecA but do not activate the translocation ATPase

The M13 procoat protein serves as the paradigm for the Sec-independent membrane insertion pathway. This protein is inserted into the inner membrane of Escherichia coli with two hydrophobic regions and a central periplasmic loop region of 20 amino acid residues. Extension of the periplasmic loop region renders M13 procoat membrane insertion Sec-dependent. Loop regions with 118 or more residues required SecA and SecYEG and were efficiently translocated in vivo. Two mutants having loop regions of 80 and 100 residues, respectively, interacted with SecA but failed to activate the membrane translocation ATPase of SecA in vitro. Similarly, a procoat mutant with two additional glutamyl residues in the loop region showed binding to SecA but did not stimulate the ATPase. The three mutants were also defective for precursor-stimulated binding of SecA to the membrane surface. Remarkably, the mutant proteins act as competitive inhibitors of the Sec translocase. This suggests that the region to be translocated is sensed by SecA but the activation of the SecA translocation ATPase is only successful for substrates with a minimum length of the translocated region.     

Complex behavior in solution of homodimeric SecA

SecA, a homodimeric protein involved in protein export in Escherichia coli, exists in the cell both associated with the membrane translocation apparatus and free in the cytosol. SecA is a multifunctional protein involved in protein localization and regulation of its own expression. To carry out these functions, SecA interacts with a variety of proteins, phospholipids, nucleotides, and nucleic acid and shows two enzymic activities. It is an ATPase and a helicase. Its role during protein localization involves interaction with the precursor polypeptides to be exported, the cytosolic chaperone SecB, and the SecY subunit of the membrane-associated translocase, as well as with acidic phospholipids. At the membrane, SecA undergoes a cycle of binding and hydrolysis of ATP coupled to conformational changes that result in translocation of precursors through the cytoplasmic membrane. The helicase activity of SecA and its affinity for its mRNA are involved in regulation of its own expression. SecA has been reported to exist in at least two conformational states during its functional cycle. Here we have used analytical centrifugation, as well as column chromatography coupled with multi-angle light scatter, to show that in solution SecA undergoes at least two monomer-dimer equilibrium reactions that are sensitive to temperature and to concentration of salt.     

Structural determinants of SecB recognition by SecA in bacterial protein translocation

SecB is a bacterial chaperone involved in directing pre-protein to the translocation pathway by its specific interaction with the peripheral membrane ATPase SecA. The SecB-binding site on SecA is located at its C terminus and consists of a stretch of highly conserved residues. The crystal structure of SecB in complex with the C-terminal 27 amino acids of SecA from Haemophilus influenzae shows that the SecA peptide is structured as a CCCH zinc-binding motif. One SecB tetramer is bound by two SecA peptides, and the interface involves primarily salt bridges and hydrogen bonding interactions. The structure explains the importance of the zinc-binding motif and conserved residues at the C terminus of SecA in its high-affinity binding with SecB. It also suggests a model of SecB-SecA interaction and its implication for the mechanism of pre-protein transfer in bacterial protein translocation.     

Selective SecA association with signal sequences in ribosome-bound nascent chains: a potential role for SecA in ribosome targeting to the bacterial membrane

The role of SecA in selecting bacterial proteins for export was examined using a heterologous system that lacks endogenous SecA and other bacterial proteins. This approach allowed us to assess the interaction of SecA with ribosome-bound photoreactive nascent chains in the absence of trigger factor, SecB, Ffh (the bacterial protein component of the signal recognition particle), and the SecYEG translocon in the bacterial plasma membrane. In the absence of membranes, SecA photocross-linked efficiently to nascent translocation substrate OmpA in ribosome-nascent chain (RNC) complexes in an interaction that was independent of both ATP and SecB. However, no photocross-linking to a nascent membrane protein that is normally targeted by a signal recognition particle was observed. Modification of the signal sequence revealed that its affinity for SecA and Ffh varied inversely. Gel filtration showed that SecA binds tightly to both translating and non-translating ribosomes. When purified SecA.RNC complexes containing nascent OmpA were exposed to inner membrane vesicles lacking functional SecA, the nascent chains were successfully targeted to SecYEG translocons. However, purified RNCs lacking SecA were unable to target to the same membranes. Taken together, these data strongly suggest that cytosolic SecA participates in the selection of proteins for export by co-translationally binding to the signal sequences of non-membrane proteins and directing those nascent chains to the translocon.     

Evidence that SecB enhances the activity of SecA

In Escherichia coli, SecA is a critical component of the protein transport machinery which powers the translocation process by hydrolyzing ATP and recognizing signal peptides which are the earmark of secretory proteins. In contrast, SecB is utilized by only a subset of preproteins to prevent their premature folding and chaperone them to membrane-bound SecA. Using purified components and synthetic signal peptides, we have studied the interaction of SecB with SecA and with SecA-signal peptide complexes in vitro. Using a chemical cross-linking approach, we find that the formation of SecA-SecB complexes is accompanied by a decrease in the level of cross-linking of SecA dimers, suggesting that SecB induces a conformational change in SecA. Furthermore, functional signal peptides, but not dysfunctional ones, promote the formation of SecA-SecB complexes. SecB is also shown to directly enhance the ATPase activity of SecA in a concentration-dependent and saturable manner. To determine the biological consequence of this finding, the influence of SecB on the signal peptide-stimulated SecA/lipid ATPase was studied using synthetic peptides of varying hydrophobicity. Interestingly, the presence of SecB can sufficiently boost the response of signal peptides with moderate hydrophobicity such that it is comparable to the activity generated by a more hydrophobic peptide in the absence of SecB. The results suggest that SecB directly enhances the activity of SecA and provide a biochemical basis for the enhanced transport efficiency of preproteins in the presence of SecB in vivo.     

Zinc stabilizes the SecB binding site of SecA

The molecular chaperone SecB targets preproteins to SecA at the translocation sites in the cytoplasmic membrane of Escherichia coli. SecA recognizes SecB via its carboxyl-terminal 22 aminoacyl residues, a highly conserved domain that contains 3 cysteines and 1 histidine residue that could potentially be involved in the coordination of a metal ion. Treatment of SecA with a zinc chelator resulted in a loss of the stimulatory effect of SecB on the SecA translocation ATPase activity, while the activity could be restored by the addition of ZnCl2. Interaction of SecB with the SecB binding domain of SecA is disrupted by chelators of divalent cations, and could be restored by the addition of Cu2+ or Zn2+. Atomic absorption and electrospray mass spectrometry revealed the presence of one zinc atom per monomeric carboxyl terminus of SecA. It is concluded that the SecB binding domain of SecA is stabilized by a zinc ion that promotes the functional binding of SecB to SecA.     

NMR structure of the C-terminal domain of SecA in the free state

SecA is an integral component of the prokaryotic Sec preprotein secretory translocase system. We report here the solution NMR structure of a fragment corresponding to the C-terminal domain of Escherichia coli SecA. In the presence of Zn2+, the fragment adopts a shortened version of the classic betabetaalpha zinc finger fold. The isolated C-terminal domain shows substantial differences from the X-ray structure of a homologous SecA domain bound to the chaperone-like cofactor SecB. The differences between the structures of the free and bound forms suggest that binding to SecB causes a perturbation of the C-terminal domain's intrinsically favored betabetaalpha fold.     

The oligomeric distribution of SecYEG is altered by SecA and translocation ligands

The multimeric membrane protein complex translocase mediates the transport of preproteins across and integration of membrane proteins into the inner membrane of Escherichia coli. The translocase consists of the peripheral membrane-associated ATPase SecA and the heterotrimeric channel-forming complex consisting of SecY, SecE and SecG. We have investigated the quaternary structure of the SecYEG complex in proteoliposomes. Fluorescence resonance energy transfer demonstrates that SecYEG forms oligomers when embedded in the membrane. Freeze-fracture techniques were used to examine the oligomeric composition under non-translocating and translocating conditions. Our data show that membrane-embedded SecYEG exists in a concentration-dependent equilibrium between monomers, dimers and tetramers, and that dynamic exchange of subunits between oligomers can occur. Remarkably, the formation of dimers and tetramers in the lipid environment is stimulated significantly by membrane insertion of SecA and by the interaction with translocation ligands SecA, preprotein and ATP, suggesting that the active translocation channel consists of multiple SecYEG complexes.     

Interdependent Effects of the Charge of the N-Terminal Region of the Signal Peptide,SecA, and SecB on Secretion of Alkaline Phosphatase in Escherichia coli

The cytoplasmic step of posttranslational secretion in Escherichia coli is catalyzed by export-specific chaperone SecB and translocational ATPase SecA. In addition, the efficiency of secretion depends on the charge of the signal peptide (SP). Replacement of positively charged Lys(–20) with uncharged Ala or negatively charged Glu in the N-terminal region of SP of the alkaline phosphatase precursor (prePhoA) was shown to decrease the PhoA secretion in the periplasm. The effect on secretion increased in the absence of SecB and was especially high on SecA inactivation. A change in SP charge strengthened the SecA and SecB dependences of secretion. On evidence of immunoprecipitation, the charge of the N-terminal region of SP had no effect on prePhoA interaction with the cytoplasmic secretion factors, suggesting no direct binding between this region and SecA or SecB. Yet the charge of the N-terminal region proved to affect the functions of SP as an intramolecular chaperone and a factor of prePhoA targeting to the membrane in cooperation with SecA and SecB.     

Nucleotide and phospholipid-dependent control of PPXD and C-domain association for SecA ATPase

The SecA ATPase motor is a central component of the eubacterial protein translocation machinery. It is comprised of N- and C-domain substructures, where the N-domain is comprised of two nucleotide-binding domains that flank a preprotein-binding domain (PPXD), while the C-domain binds phospholipids as well as SecB chaperone. Our recent crystal structure of Bacillus subtilis SecA protomer [Hunt, J. F., Weinkauf, S., Henry, L., Fak, J. J., McNicholas, P., Oliver, D. B., and Deisenhofer, J. (2002) Science 297, 2018-2026] along with experimental support for the correct dimer structure [Ding, H., Hunt, J. F., Mukerji, I., and Oliver, D. (2003) Biochemistry 42, 8729-8738] have now allowed us to study SecA structural dynamics during interaction with various translocation ligands and to relate these findings to current models of SecA-dependent protein translocation. In this paper, we utilized fluorescence resonance energy transfer methodology with genetically engineered SecA proteins containing unique pairs of tryptophan and fluorophore-labeled cysteine residues within the PPXD and C-domains of SecA to investigate the interaction of these two domains and their response to temperature, model membranes, and nucleotide. Consistent with the crystal structure of SecA, we found that the PPXD and C-domains are proximal to one another in the ground state. Increasing temperature or binding to model membranes promoted a loosening of PPXD and C-domain association, while ADP binding promoted a tighter association. A similar pattern of PPXD and C-domain association was obtained also for Escherichia coli SecA protein. Furthermore, a hyperactive Azi-PrlD SecA protein of E. coli had increased PPXD and C-domain separation, consistent with its activation in the ground state. Interestingly, PPXD and C-domain separation occurred prior to the onset of major temperature-induced conformational changes in both the PPXD and C-domains of SecA. Our results support a model in which PPXD and C-domain proximity is important for regulating the initial stages of SecA activation, and they serve also as a template for future structural studies aimed at elucidation of the chemomechanical cycle of SecA-dependent protein translocation.     

Interaction of effect on secretion of alkaline phosphatase from E. coli by charge of the N-terminal part of the signal peptide and proteins SecB and SecA

The cytoplasmic step of posttranslational secretion in Escherichia coli is catalyzed by export-specific chaperone SecB and translocational ATPase SecA. In addition, the efficiency of secretion depends on the charge of the signal peptide (SP). Substitution of positively charged Lys(-20) with noncharged Ala or negatively charged Glu in the N-terminal region of SP of the alkaline phosphatase (PhoA) precursor (prePhoA) was shown to decrease the PhoA secretion in the periplasm. The effect on secretion increased in the absence of SecB and was especially high on SecA inactivation. A change in SP charge strengthened the SecA and SecB dependences of secretion. On evidence of immunoprecipitation, the charge of the N-terminal region of SP had no effect on prePhoA interaction with the cytoplasmic secretion factors, suggesting no direct binding between this region and SecA or SecB. Yet the charge of the N-terminal region proved to affect the functions of SP as an intramolecular chaperone and a factor of prePhoA targeting to the membrane in cooperation with SecA and SecB.     

Identification and Characterization of Protease-Resistant SecA Fragments: SecA Has Two Membrane-Integral Forms

We have identified and characterized the protease-resistant SecA fragments (X. Chen, H. Xu, and P. C. Tai, J. Biol. Chem. 271:29698–29706, 1996) through immunodetection with region-specific antibodies, chemical extraction, and sequencing analysis. The 66-, 36-, and 27-kDa proteolytic fragments in the membranes all start at Met₁, whereas the 48-kDa fragment starts at Glu₃₆₁. The overlapping of the sequences of the 66- and 48-kDa fragments indicates that they are derived from different SecA molecules. These two fragments were generated differently in response to ATP hydrolysis and protein translocation. Furthermore, the presence of membrane is required for the generation of the 48-kDa fragment but not for that of the 66-kDa fragment. These data suggest that there are two different integral forms of SecA in the membrane: SecA_S and SecA_M. The combination of these two forms of SecA has several membrane-interacting domains. Both forms of SecA are integrated in the membrane, since both the 48- and 66-kDa fragments could be derived from urea- or Na₂CO₃-washed membranes. Moreover, all fragments are resistant to extraction with a high concentration of salt or with heparin, but the membrane-specific 48-kDa SecA domain is more sensitive to Na₂CO₃ or urea extraction. This suggests that this domain may interact with other membrane proteins in an aqueous microenvironment and therefore may form a part of the protein-conducting channel.     

SecB modulates the nucleotide-bound state of SecA and stimulates ATPase activity

In Escherichia coli, the formation of SecA-SecB complexes has a direct effect on SecA ATPase activity. The mechanism of this interaction was evaluated and defined using controlled trypsinolysis, equilibrium dialysis at low temperature, and kinetic analyses of the SecA ATPase reaction. The proteolysis data indicate that SecB and the nonhydrolyzable ATP analogue AMP-P-C-P induce similar conformational changes in SecA which result in a more open or extended structure that is suggestive of the ATP-bound form. The effect is synergistic and concentration-dependent, and requires the occupation of both the high- and low-affinity nucleotide binding sites for maximum effect. The equilibrium dialysis experiments and kinetic data support the observation that the SecB-enhanced SecA ATPase activity is the result of an increased rate of ATP hydrolysis rather than an increase in the affinity of ATP for SecA and that the high-affinity nucleotide binding site is conformationally regulated by SecB. It appears that SecB may function as an intermolecular regulator of ATP hydrolysis by promoting the ATP-bound state of SecA. The inhibition of SecA ATPase activity by sodium azide in the presence of IMVs and a functional signal peptide further indicates that SecB promotes the ATP-bound form of SecA.     

Binding of SecA to the SecYEG complex accelerates the rate of nucleotide exchange on SecA

SecYEG translocase mediates the transport of preproteins across the inner membrane of Escherichia coli. SecA binds the membrane-embedded SecYEG protein-conducting channel with high affinity and then drives the stepwise translocation of preproteins across the membrane through multiple cycles of ATP binding and hydrolysis. We have investigated the kinetics of nucleotide binding to SecA while associated with the SecYEG complex. Lipid-bound SecA was separated from Se-cYEG-bound SecA by sedimentation of the proteoliposomes through a glycerol cushion, which maintains the SecA native state and effectively removes the lipid-bound SecA fraction. Nucleotide binding was assessed by means of fluorescence resonance energy transfer using fluorescent ATP analogues as acceptors of the intrinsic SecA tryptophan fluorescence in the presence of a tryptophanless variant of the SecYEG complex. Binding of SecA to the SecYEG complex elevated the rate of nucleotide exchange at SecA independently of the presence of preprotein. This defines a novel pretranslocation activated state of SecA that is primed for ATP hydrolysis upon preprotein interaction.     

Penetration into membrane of amino‐terminal region of SecA when associated with SecYEG in active complexes

The general secretory (Sec) system of Escherichia coli translocates both periplasmic and outer membrane proteins through the cytoplasmic membrane. The pathway through the membrane is provided by a highly conserved translocon, which in E. coli comprises two heterotrimeric integral membrane complexes, SecY, SecE, and SecG (SecYEG), and SecD, SecF, and YajC (SecDF/YajC). SecA is an associated ATPase that is essential to the function of the Sec system. SecA plays two roles, it targets precursors to the translocon with the help of SecB and it provides energy via hydrolysis of ATP. SecA exists both free in the cytoplasm and integrally membrane associated. Here we describe details of association of the amino‐terminal region of SecA with membrane. We use site‐directed spin labelling and electron paramagnetic resonance spectroscopy to show that when SecA is co‐assembled into lipids with SecYEG to yield highly active translocons, the N‐terminal region of SecA penetrates the membrane and lies at the interface between the polar and the hydrophobic regions, parallel to the plane of the membrane at a depth of approximately 5 Å. When SecA is bound to SecYEG, preassembled into proteoliposomes, or nonspecifically bound to lipids in the absence of SecYEG, the N‐terminal region penetrates more deeply (8 Å). Implications of partitioning of the SecA N‐terminal region into lipids on the complex between SecB carrying a precursor and SecA are discussed.