Model of CE enantioseparation systems with a mixture of chiral selectors. Part II. Determination of thermodynamic parameters of the interconversion in chiral and achiral environments separately

The theoretical assumption that a multi-CS enantioseparation system, the model of which was described in Part I of this work, can be treated as a separation system with only one CS is confirmed by a set of experiments. The model assumes that each individual analyte-CS interaction is fast, fully independent on other interactions and the analyte: CS ratio is 1:1 and that the analyte is present in its concentration small enough not to considerably change the concentration of free CSs. An enantioselective environment in affinity capillary electrophoresis is created using a commercially available mixture of highly sulfated beta-cyclodextrines as chiral selectors (CSs) and lorazepam as an analyte that undergoes interconversion during the separation process. Dependencies of the electrophoretic mobilities of the two enantiomers on concentration of the CSs mixture are proved to follow the proposed multi-CS model. Global rate constants of interconversion are determined at various temperatures and concentrations of the CSs mixture. In accord with the proposed theory, linear dependencies of the global rate constants on CSs concentration are achieved. Intercepts and slopes of these plots correspond to local rate constants of interconversion in achiral (without the mixture of CSs in background electrolyte (BGE)) and chiral (with the CSs mixture in BGE) environments, respectively. The experimentally obtained electropherograms show an excellent fit with those resulting from the computer simulation based on our model.     

Chiral discrimination by HPLC and CE and antifungal activity of racemic fenticonazole and its enantiomers

Fenticonazole is a chiral antifungal agent, used in therapy as the racemic mixture. The investigation on the chirality of fenticonazole is reported in this study. rac-Fenticonazole was resolved by HPLC and by capillary electrophoresis (CE). The chiral stationary phase (CSP), used in HPLC, was Daicel OD-H, a commercial phase, which allowed the separate collection of the two enantiomers. The chiral selectors used for CE were some cyclodextrin derivatives. The analysis time required from CE was about the half the HPLC enantioseparation time. The biological activity of the rac-mixture and each individual enantiomer was tested against Cryptococcus neoformans and two Aspergillus nidulans strains. The minimum inhibitory concentration (MIC) evaluation showed that the eutomer was the enantiomer chromatographically more retained and had a longer migration time in the electrophoretic enantioseparation. The CD spectrum of the eutomer showed a positive Cotton effect.     

Enantiomeric separation of N‐protected amino acids by non‐aqueous capillary electrophoresis using quinine or Tert‐butyl carbamoylated quinine as chiral additive

A capillary electrophoretic (CE) method for the enantioseparation of N‐protected chiral amino acids was developed using quinine and tert‐butyl carbamoylated quinine as chiral selectors added to nonaqueous electrolyte solutions (NACE). A series of various N‐derivatized amino acids were tested as chiral selectands, and in order to optimize the CE enantioseparation of these compounds, different parameters were investigated: the nature of the organic solvent, the combination of different solvents, the nature and the concentration of the background electrolyte, the selector concentration, the capillary temperature, and the applied voltage. The influence of these factors on the separation of the analyte enantiomers and the electroosmotic flow was studied. Generally, with tert‐butyl carbamoylated quinine as chiral selector, better enantioseparations were achieved than with unmodified quinine. Optimum experimental conditions were found with a buffer made of 12.5 mM ammonia, 100 mM octanoic acid, and 10 mM tert‐butyl carbamoylated quinine in an ethanol–methanol mixture (60:40 v/v). Under these conditions, DNB‐Leu enantiomers could be separated with a selectivity factor (α) of 1.572 and a resolution (Rs) of 64.3; a plate number (N) of 127,000 and an asymmetry factor (As) of 0.93 were obtained for the first migrating enantiomer. Chirality 11:622–630, 1999. © 1999 Wiley‐Liss, Inc.     

Enantioselective potential of polysaccharide‐based chiral stationary phases in supercritical fluid chromatography

The enantioselective potential of two polysaccharide‐based chiral stationary phases for analysis of chiral structurally diverse biologically active compounds was evaluated in supercritical fluid chromatography using a set of 52 analytes. The chiral selectors immobilized on 2.5 μm silica particles were tris‐(3,5‐dimethylphenylcarmabate) derivatives of cellulose or amylose. The influence of the polysaccharide backbone, different organic modifiers, and different mobile phase additives on retention and enantioseparation was monitored. Conditions for fast baseline enantioseparation were found for the majority of the compounds. The success rate of baseline and partial enantioseparation with cellulose‐based chiral stationary phase was 51.9% and 15.4%, respectively. Using amylose‐based chiral stationary phase we obtained 76.9% of baseline enantioseparations and 9.6% of partial enantioseparations of the tested compounds. The best results on cellulose‐based chiral stationary phase were achieved particularly with propane‐2‐ol and a mixture of isopropylamine and trifluoroacetic acid as organic modifier and additive to CO₂, respectively. Methanol and basic additive isopropylamine were preferred on amylose‐based chiral stationary phase. The complementary enantioselectivity of the cellulose‐ and amylose‐based chiral stationary phases allows separation of the majority of the tested structurally different compounds. Separation systems were found to be directly applicable for analyses of biologically active compounds of interest.     

Investigation of maltodextrin‐based synergistic system with amino acid chiral ionic liquid as additive for enantioseparation in capillary electrophoresis

The combined use of chiral ionic liquids (ILs) and chiral selectors in capillary electrophoresis (CE) to establish a synergistic system has proven to be an effective approach for enantioseparation. In this article, tetramethylammonium‐L‐arginine, a kind of amino acid chiral IL, was applied to investigate its potential synergistic effect with maltodextrin in CE enantioseparation. The established maltodextrin‐based synergistic system showed markedly improved enantioseparations compared with the single maltodextrin system. Parameters such as the chiral IL concentration, maltodextrin concentration, buffer pH, applied voltage, and capillary temperature were optimized. Satisfactory enantioseparation of the five studied drugs, including nefopam, duloxetine, ketoconazole, cetirizine, and citalopram was achieved in 50 mM Tris‐H₃PO₄ buffer solution (pH 3.0) containing 7.0% (m/v) maltodextrin and 60 mM tetramethylammonium‐L‐arginine. In addition, the chiral configuration of tetramethylammonium‐L‐arginine was also investigated to demonstrate the existence of a synergistic effect between chiral ILs and maltodextrin.     

Separation of drug enantiomers by liquid chromatography and capillary electrophoresis, using immobilized proteins as chiral selectors

Proteins display interesting chiral discrimination properties owing to multiple possibilities of intermolecular interactions with chiral compounds. This review deals with proteins which have been used as immobilized chiral selectors for the enantioseparation of drugs in liquid chromatography and capillary electrophoresis. The main procedures allowing the immobilization of proteins onto matrices, such as silica and zirconia particles, membranes and capillaries are first presented. Then the factors affecting the enantioseparation of drugs in liquid chromatography, using various protein-based chiral stationary phases (CSPs), are reviewed and discussed. Last, chiral separations already achieved using immobilized protein selectors in affinity capillary electrochromatography (ACEC) are presented and compared in terms of efficiency, stability and reproducibility.     

A mixed stationary phase containing two versatile cyclodextrin-based selectors for the simultaneous gas chromatographic enantioseparation of racemic alkanes and racemic alpha-amino acid derivatives

In an effort to simultaneously enantioseparate racemic unfunctionalized alkanes and racemic alpha-amino acid derivatives by gas chromatography (GC) in forthcoming experiments related to the search for extraterrestrial homochirality, the two versatile modified cyclodextrin (CD) selectors octakis(6-O-methyl-2,3-di-O-pentyl)-gamma-cyclodextrin (Lipodex G) and heptakis(2,3-di-O-methyl-6-O-tert-butyldimethylsilyl)-beta-cyclodextrin were dissolved in a polysiloxane and the mixed binary chiral selector system was coated onto a 50m x 0.25 mm i.d. fused silica capillary column. Whereas the former CD selector enantioseparates racemic unfunctionalized alkanes the latter CD selector preferentially resolves N-(O,S)-trifluoroacetyl-alpha-amino acid alkyl esters. With both CD selectors employed as mixed binary chiral selector system present in one chiral stationary phase (CSP), the simultaneous gas chromatographic enantioseparation of racemic alkanes and of racemic derivatized alpha-amino acids is achieved in a single temperature-programmed run. Also for other classes of racemic compounds, the scope of enantioseparation could be extended as compared to the conventional use of the single CD selectors in GC.     

Enantioseparation of Tröger's Base Derivatives by Capillary Electrophoresis Using Cyclodextrins as Chiral Selectors

The enantioseparation of seven Tröger's base derivatives (TBs) was carried out by capillary electrophoresis using α‐, β‐, and γ‐cyclodextrins as chiral selectors and phosphate at 20 mmol/l concentration, pH 2.5, as background electrolyte. The method was optimized with respect to the concentration of chosen chiral selectors (0–50 mmol/l) and the amount of organic solvent (acetonitrile, 0–25 % (v/v)) in the electrolyte. The results indicate that all the studied variables, i.e., type of chiral selector, its concentration, and the amount of the added organic solvent, have a significant impact on the enantioseparation of the studied TBs. The best results for the majority of the separated TBs were obtained utilizing β‐cyclodextrin at 5 mmol/l concentration and with various amounts of acetonitrile added ranging from 5 to 15% (v/v) in the background electrolyte. For the two smallest studied TBs, γ‐cyclodextrin with 10% (v/v) acetonitrile also provided good resolution. Chirality 25:379–383, 2013. © 2013 Wiley Periodicals, Inc.     

Identification of enantioselective extractants for chiral separation of amines and aminoalcohols

The major obstacle for the introduction of fractional reactive extraction as a chiral separation method in the chemical and pharmaceutical industries is the lack of versatile enantioselective extractants. Therefore, a rational approach is developed to transfer the extensive knowledge of chiral selectors reported in the literature on chiral recognition and other chiral separation techniques to extraction. Based on a similarity in separation mechanisms, it was expected that chiral selectors originating from a technique in which chiral recognition takes place in the liquid phase are most likely to function as enantioselective extractant. Using this approach, a selection of promising extractants was made from the literature and experimentally evaluated for the enantioseparation of aminoalcohols and amines. As a result, four enantioselective extractant systems, namely, dibutyl-L-tartrate with boric acid, N-(2-hydroxydodecyl)-L-hydroxyproline Cu(II) complex, N-dodecyl-L-hydroxyproline Cu(II) complex, and azophenolic crown ether, have been identified. The azophenolic crown ether system performed the best and demonstrated an enantioselectivity between 1.3-5.0 for five out of six test compounds. Identification of the enantioselective extractant systems was highly facilitated by the developed rational transfer approach that, although partially qualitative, appeared capable of reducing more than 50 encountered candidates to only three promising systems for further experimental evaluation. Therefore, it is expected that this approach can be successfully applied to identify enantioselective extractants for other classes of enantiomers as well.     

Determination of enantiomeric composition by negative-ion electrospray ionization-mass spectrometry using deprotonated N-(3,5-dinitrobenzoyl)amino acids as chiral selectors

The ability to use mixtures of deprotonated N-(3,5-dinitrobenzoyl)amino acids as chiral selectors for the determination of enantiomeric composition by electrospray ionization-mass spectrometry is demonstrated. For each experiment, two N-(3,5-dinitrobenzoyl)amino acids were chosen such that each would have opposite selectivity for the enantiomers of the analyte. Electrospray ionization-mass spectrometry, monitored in the negative ion mode, of solutions containing the two N-(3,5-dinitrobenzoyl)amino acids, sodium hydroxide, and the analyte, in a one-to-one mixture of methanol and water, afford peaks in the mass spectrum that correspond to the deprotonated 1:1 analyte-selector complexes. The ratio of the intensities of the complexes in the mass spectrum can be related to the enantiomeric composition of the analyte. Additionally, the sense and extent of chiral recognition is consistent with chromatographic observations, using chiral stationary phases derived from N-(3,5-dinitrobenzoyl)amino acids. Each analysis of enantiomeric composition requires less than 10 s to complete, indicating that this method has great potential for the development of fast-/high-throughput chiral analyses.     

The comparison in enantioseparation ability of the chiral stationary phases with single and mixed selector--the selectors derived from two D-tartrates

(2S,3S)-2,3-Bis(3,5-dimethylphenylcarbonyloxy)-3-(benzyloxycarbonyl)-propanoic acid and (2S,3S)-2,3-bis(1-naphthalenecarbonyloxy)-3-(benzyloxycarbonyl)-propanoic acid were synthesized from D-tartaric acid. These two compounds were chlorinated to afford two chiral selectors for chiral stationary phases (CSPs). The selectors were separately immobilized on aminated silica gel to give two single selector CSPs; and were simultaneously immobilized to obtain a mixed selector CSP. Comparing to the single selector CSPs, the mixed selector CSP bears the enhanced enantioseparation ability, suggesting that the two selectors in the mixed selector CSP are consistent for chiral recognition in most mobile phase conditions.     

Novel chiral stationary phases based on 3,5-dimethyl phenylcarbamoylated β-cyclodextrin combining cinchona alkaloid moiety

Novel chiral selectors based on 3,5-dimethyl phenylcarbamoylated β-cyclodextrin connecting quinine (QN) or quinidine (QD) moiety were synthesized and immobilized on silica gel. Their chromatographic performances were investigated by comparing to the 3,5-dimethyl phenylcarbamoylated β-cyclodextrin (β-CD) chiral stationary phase (CSP) and 9-O-(tert-butylcarbamoyl)-QN-based CSP (QN-AX). Fmoc-protected amino acids, chiral drug cloprostenol (which has been successfully employed in veterinary medicine), and neutral chiral analytes were evaluated on CSPs, and the results showed that the novel CSPs characterized as both enantioseparation capabilities of CD-based CSP and QN/QD-based CSPs have broader application range than β-CD-based CSP or QN/QD-based CSPs. It was found that QN/QD moieties play a dominant role in the overall enantioseparation process of Fmoc-amino acids accompanied by the synergistic effect of β-CD moiety, which lead to the different enantioseparation of β-CD-QN-based CSP and β-CD-QD-based CSP. Furthermore, new CSPs retain extraordinary enantioseparation of cyclodextrin-based CSP for some neutral analytes on normal phase and even exhibit better enantioseparation than the corresponding β-CD-based CSP for certain samples.     

Use of Sulfated Cyclofructan 6 and Sulfated Cyclodextrins for the Chiral Separation of Four Basic Pharmaceuticals by Capillary Electrophoresis

Sulfated cyclofructan 6 (S‐CF6) and sulfated cyclodextrins (S‐α‐, β‐, γ‐CDs) are highly selective chiral selectors for the enantioseparation of basic solutes. In this study, S‐CF6 was introduced for the enantiomeric separation of four basic pharmaceuticals (including tamsulosin, tiropramide, bupivacaine, and norephedrine) by capillary electrophoresis (CE), and the enantiomeric separation performance was compared with S‐α‐, β‐, γ‐CDs. The effects of the chiral selector type, chiral selector concentration, operating voltage, and column temperature were examined and optimized. Excellent resolutions were obtained for all solutes on these chiral selectors. Chirality 25:735–742, 2013. © 2013 Wiley Periodicals, Inc.     

Amino acid modified carbon nanotubes with optimal pore size for chiral separation

Precisely controlling pore size of porous materials is of great importance for chiral separation, but a great challenge in practical applications. In contrast, the molecular dynamics (MD) simulation can be quite a convenient way to determine the effect of the pore dimension on the chiral resolution performances and thus to define the optimal pore size. In this work, inner-wall functionalised carbon nanotubes (CNTs) were used as porous materials and D- and L-phenylalanine were selected as chiral probes. The enantioseparation behaviour was investigated via varying the pore diameter of CNTs, controlling the grafting amount of chiral selectors and tuning the spacer length. Results show that varying the pore size has a significant effect on the enantioselectivity. Additionally, the effect of the introduction of varying the grafting ratio and tuning the spacer length on the chiral separation performance was also examined in this work. It was found that varying the grafting ratio, especially the spacer length between substrates and selectors, could also be one of the most effective alternatives to improving enantioselectivity. Our findings can provide a guidance for the practical applications in the chiral separation.     

Synthesis of dendrimer‐type chiral stationary phases based on the selector of (1S,2R)‐(+)‐2‐Amino‐1,2‐diphenylethanol derivate and their enantioseparation evaluation by HPLC

In our recent work, a series of dendritic chiral stationary phases (CSPs) were synthesized, in which the chiral selector was L‐2‐(p‐toluenesulfonamido)‐3‐phenylpropionyl chloride (selector I), and the CSP derived from three‐generation dendrimer showed the best separation ability. To further investigate the influence of the structures of dendrimer and chiral selector on enantioseparation ability, in this work, another series CSPs ( CSPs 1‐4 ) were prepared by immobilizing (1S,2R)‐1,2‐diphenyl‐2‐(3‐phenylureido)ethyl 4‐isocyanatophenylcarbamate (selector II) on one‐ to four‐generation dendrimers that were prepared in previous work. CSPs 1 and 4 demonstrated the equivalent enantioseparation ability. CSPs 2 and 3 showed the best and poorest enantioseparation ability respectively. Basically, these two series of CSPs exhibited the equivalent enantioseparation ability although the chiral selectors were different. Considering the enantioseparation ability of the CSP derived from aminated silica gel and selector II is much better than that of the one derived from aminated silica gel and selector I, it is believed that the dendrimer conformation essentially impacts enantioseparation. Chirality, 2010. © 2009 Wiley‐Liss, Inc.     

Establishment and Evaluation of the Novel Tetramethylammonium‐L‐Hydroxyproline Chiral Ionic Liquid Synergistic System Based on Clindamycin Phosphate for Enantioseparation by Capillary Electrophoresis

Much attention has been paid to chiral ionic liquids (ILs) in analytical chemistry, especially its application in capillary electrophoresis (CE) enantioseparation. However, the investigation of chiral ionic liquids synergistic systems based on antibiotic chiral selectors has been reported in only one article. In this work, a novel chiral ionic liquid, tetramethylammonium‐L‐hydroxyproline (TMA‐L‐Hyp), was applied for the first time in CE chiral separation to evaluate its potential synergistic effect with clindamycin phosphate (CP) as the chiral selector. As observed, significantly improved separation was obtained in this TMA‐L‐Hyp/CP synergistic system compared to TMA‐L‐Hyp or a CP single system. Several primary factors that might influence the separation were investigated, including CP concentration, TMA‐L‐Hyp concentration, buffer pH, types and concentrations of organic modifier, applied voltage, and capillary temperature. The best results were obtained with a 40 mM borax buffer (pH 7.6) containing 30 mM TMA‐L‐Hyp, 80 mM CP, and 20% (v/v) methanol, while the applied voltage and temperature were set at 20 kV and 20°C, respectively. Chirality 27:598–604, 2015. © 2015 Wiley Periodicals, Inc.     

Enantiomeric separation of dansyl amino acids using macrocyclic antibiotics as chiral mobile phase additives by narrow-bore high-performance liquid chromatography

Seven macrocyclic antibiotics were evaluated as chiral selectors for the enantiomeric separation of 11 dansyl amino acids using narrow-bore high-performance liquid chromatography (HPLC). The macrocyclic antibiotics were incorporated as mobile phase additives to determine the enantioselective effects on the chiral analytes. The resolution and capacity factor (k') of each analyte were assessed while varying the structure of macrocyclic antibiotic and the mobile phase buffer pH. The selectivity of the chiral selectors was measured as a function of changes in these parameters. All 11 dansyl amino acids were separated by at least one of the chiral selectors. Three-dimensional computer modeling of the more effective chiral selectors illustrated the importance of macrocyclic antibiotic structure concerning stereospecific analyte interaction.     

The development of biphasic chiral recognition in chiral separation

In chiral separation, enantioseparation factor is an important parameter which influences the resolution of enantiomers. In this current overview, a biphasic chiral recognition method is introduced to the readers. This method can significantly improve the enantioseparation factor in two‐phase solvent through adding lipophilic and hydrophilic chiral selectors which have opposite chiral recognition ability to organic and aqueous phases, respectively. This overview presents the development and applications of biphasic chiral recognition in liquid‐liquid extraction and counter current chromatography. It mainly focuses on the topics of mechanism, advantages and limitations, applications, and key factors of biphasic chiral recognition. In addition, the future outlook on development of biphasic chiral recognition also has been discussed in this overview.     

Determination of the chiral status of different novel psychoactive substance classes by capillary electrophoresis and β-cyclodextrin derivatives

Besides the abuse of well-known illicit drugs, consumers discovered new synthetic compounds with similar effects but minor alterations in their chemical structure. Originally, these so-called novel psychoactive substances (NPS) have been created to circumvent law of prosecution because of illicit drug abuse. During the past decade, such compounds came up in generations, the most popular compound was a synthetic cathinone derivative named mephedrone. Cathinones are structurally related to amphetamines; to date, more than 120 completely new derivatives have been synthesized and are traded via the Internet. Cathinones possess a chiral center; however, only little is known about the pharmacology of their enantiomers. However, NPS comprise further chiral compound classes such as amphetamine derivatives, ketamines, 2-(aminopropyl)benzofurans, and phenidines. In continuation of our project, a cheap and easy-to-perform chiral capillary zone electrophoresis method for enantioseparation of cathinones presented previously was extended to the aforementioned compound classes. Enantioresolution was achieved by simply adding native β-cyclodextrin, acetyl-β-cyclodextrin, 2-hydroxypropyl-β-cyclodextrin, or carboxymethyl-β-cyclodextrin as chiral selector additives to the background electrolyte. Fifty-one chiral NPS served as analytes mainly purchased from online vendors via the Internet. Using 10 mM of the aforementioned β-cyclodextrins in a 10 mM sodium phosphate buffer (pH 2.5), overall, 50 of 51 NPS were resolved. However, chiral separation ability of the selectors differed depending on the analyte. Additionally, simultaneous enantioseparations, the determination of enantiomeric migration orders of selected analytes, and a repeatability study were performed successfully. It was proven that all separated NPS were traded as racemic mixtures.     

Enantioseparation of nine indanone and tetralone derivatives by HPLC using carboxymethyl‐β‐cyclodextrin as the mobile phase additive

High‐performance liquid chromatography (HPLC) is a powerful method in the area of chiral separation. In this study, a method of HPLC using carboxymethyl‐β‐cyclodextrin (CM‐β‐CD) as chiral selector was developed for enantioseparation of nine indanone and tetralone derivatives. The separation was performed on a conventional C₁₈ column. The optimal mobile phase was a mixture of methanol and 0.05 mol/L phosphate buffer at pH 1.8 (55:45, v /v) containing 22.9 mmol/L CM‐β‐CD. Under such conditions, the resolutions of all analytes were over 1.8 except for Compound F. The results of the study indicate the presence of a complex with 1:1 stoichiometry of the inclusion complex. In addition, it can be inferred from thermodynamic analysis that the behavior of formation of the inclusion complex and enantioseparation occurred simultaneously, while they were driven by different forces. The effect of analyte structure is also discussed.