Post-PCR sterilization: a method to control carryover contamination for the polymerase chain reaction.

We describe a photochemical procedure for the sterilization of polynucleotides that are created by the Polymerase Chain Reaction (PCR). The procedure is based upon the blockage of Taq DNA polymerase when it encounters a photochemically modified base in a polynucleotide strand. We have discovered reagents that can be added to a PCR reaction mixture prior to amplification and tolerate the thermal cycles of PCR, are photoactivated after amplification, and damage a PCR strand in a manner that, should the damaged strand be carried over into a new reaction vessel, prevent it from functioning as a template for the PCR. These reagents, which are isopsoralen derivatives that form cyclobutane adducts with pyrimidine bases, are shown to stop Taq polymerase under conditions appropriate for the PCR process. We show that effective sterilization of PCR products requires the use of these reagents at concentrations that are tailored to the length and sequence of the PCR product and the level of amplification of the PCR protocol.     

Influence of residual uracil-DNA glycosylase activity on the electrophoretic migration of dUTP-containing PCR products

In diagnostic amplification protocols contamination by previously amplified nucleic acids is considered the major source of false positive results. Substituting dUTP for dTTP in the PCR and initial treatment with uracil-DNA glycosylase (UNG) virtually eliminates these carryover contaminations. Subsequent procedures to visualize the amplicons or to optimize sensitivity and specificity of the test are not always fully compatible with UNG-treated PCR products. Here we describe the more pronounced influence of residual UNG activity on the migration of PCR amplification products in polyacrylamide as compared to agarose gels.     

Photochemical immobilization of anthraquinone conjugated oligonucleotides and PCR amplicons on solid surfaces

Ligand immobilization on solid surfaces is an essential step in fields such as diagnostics, bio sensor manufacturing, and new material sciences in general. In this paper a photochemical approach based on anthraquinone as the chromophore is presented. Photochemical procedures offer special advantages as they are able to generate highly reactive species in an orientation specific manner. As presented here, anthraquinone (AQ) mediated covalent DNA immobilization appears to be superior to currently known procedures. A synthetic procedure providing AQ-phosphoramidites is presented. These reagents facilitate AQ conjugation during routine DNA synthesis, thus enabling the AQ-oligonucleotides to be immobilized in a very convenient and efficient manner. AQ-conjugated PCR primers can be used directly in PCR. When the PCR is performed in solution, the amplicons can be immobilized after the PCR. Moreover, when the primers are immobilized prior to the PCR, a solid-phase PCR can be performed and the amplicons are thus produced directly on the solid support.     

Avoidance of nonspecific hybridization by employing oligonucleotide micro-arrays generated from hydrolysis polymerase chain reaction probe sequences

We have developed a low-density oligonucleotide-based micro-array where 5'-end-tethered capture probe sequences were derived from Primer Express software. The capture probes represent hydrolysis probe sequences devoid of any fluorochromes and were shown to retain hybridization binding specificity to their amplicons; hybridization specificity was retained independent to probe sequences. This procedure allowed the specificity of each capture probe to be verified using real-time polymerase chain reaction (PCR) in the presence of nucleic acid sequences typically expected to be present within a sample and therefore has reduced possibility of nonspecific hybridization when used in a micro-array format. We propose that specificity-validated probes are applied to form a micro-array for the purpose of general target screening, with incumbent multiparallelization and cost and time savings. However, if required, the subset of probe sequences of interest can be used for quantitative assessment in conventional real-time PCR.     

Versatile method employing basic techniques of genetic engineering to study the ability of low-molecular-weight compounds to bind covalently with DNA in cell-free systems

Numerous antitumor and carcinogenic compounds and free radicals are able to modify DNA by forming covalent bonds, mainly with nucleophilic centers in nucleobases. Such a binding is usually of utmost importance for the biological outcome. The level of DNA adducts formed by a given agent is in most cases extremely low; hence their detection is very difficult. Here we propose a simple approach, exploiting techniques widely used in genetic engineering, to demonstrate and characterize the covalent modification of a DNA fragment by any low-molecular-weight compound of interest in a cell-free system. The specifically designed, several-hundred-base-pairs-long double-stranded deoxyoligonucleotide (PCR amplified)--subject to modification--includes two restriction sites: one containing only GC base pairs recognized by restriction endonuclease MspI and the other including only AT base pairs recognized by restriction endonuclease Tru1I. The covalent modification of the restriction sites abolishes their recognition and thus cleavage by the endonucleases applied. The formation of DNA adducts is induced by incubating the oligonucleotide with increasing concentrations of a studied compound, in the appropriate activating system if required. Then, the modified oligonucleotide is submitted to digestion by the above-mentioned restriction endonucleases and the DNA fragments are separated by polyacrylamide gel electrophoresis. The inhibition of cleavage indicates the occurrence of covalent modification of the restriction site(s) while simultaneously pointing at the kind of base pairs involved in DNA adduct formation. The validation of the method was performed for two DNA binding antitumor compounds, cisplatin and CC-1065, which form adducts preferentially with guanine and adenine, respectively.     

Minimizing DNA contamination by using UNG-coupled quantitative real-time PCR on degraded DNA samples: application to ancient DNA studies

PCR analyses of ancient and degraded DNA suffer from their extreme sensitivity to contamination by modern DNA originating, in particular, from carryover contamination with previously amplified or cloned material. Any strategy for limiting carryover contamination would also have to be compatible with the particular requirements of ancient DNA analyses. These include the need (i) to amplify short PCR products due to template fragmentation; (ii) to clone PCR products in order to track possible base misincorporation resulting from damaged templates; and (iii) to avoid incomplete decontamination causing artifactual sequence transformation. Here we show that the enzymatic decontamination procedures based upon dUTP- and uracil-N-glycosylase (UNG) can be adapted to meet the specific requirements of ancient DNA research. Thus, efficiency can be improved to vastly reduce the amplification of fragments < or = 100 bp. Secondly, the use of an Escherichia coli strain deficient in both UNG and dUTPase allows for the cloning of uracil-containing PCR products and offers protection from plasmid DNA contamination, and, lastly, PCR products amplified from UNG-degraded material are free of misleading sequence modifications.     

Label-free and high-sensitive detection of Salmonella using a surface plasmon resonance DNA-based biosensor

A method based on surface plasmon resonance (SPR) DNA biosensor has been developed for label-free and high-sensitive detection of Salmonella. A biotinylated single-stranded oligonucleotide probe was designed to target a specific sequence in the invA gene of Salmonella and then immobilized onto a streptavidin coated dextran sensor surface. The invA gene was isolated from bacterial cultures and amplified using a modified semi-nested asymmetric polymerase chain reaction (PCR) technique. In order to investigate the hybridization detection, experiments with different concentration of synthetic target DNA sequences have been performed. The calibration curve of synthetic target DNA had good linearity from 5 nM to 1000 nM with a detection limit of 0.5 nM. The proposed method was applied successfully to the detection of single-stranded invA amplicons from three serovars of Salmonella, i.e., Typhimurium, Enterica and Derby, and the responses to PCR products were related to different S. typhimurium concentrations in the range from 10(2) to 10(10) CFU mL(-1). While with this system to detect E. coli and S. aureus, no significant signal was observed, demonstrating good selectivity of the method. In addition, the hybridization can be completed within 15 min, and the excellent sensor surface regeneration allows at least 300 assay cycles without obvious loss of performance.     

Amplification of target-specific,ligation-dependent circular probe

We describe a novel polymerase chain reaction (PCR)-based gene amplification method utilizing a circularizable oligodeoxyribonucleotide probe (C-probe). The C-probe contains two target complementary regions located at each terminus and an interposed generic PCR primer binding region. The hybridization of C-probe to a target brings two termini in direct apposition as the complementary regions of C-probe wind around the target to form a double helix. Subsequent ligation of the two termini results in a covalently linked C-probe that becomes `locked on to' the target. The circular nature of the C-probe allows for the generation of a multimeric single-stranded DNA (ssDNA) via extension of the antisense primer by Taq DNA polymerase along the C-probe and displacement of downstream strand, analogous to `rolling circle' replication of bacteriophage in vivo. This multimeric ssDNA then serves as a template for multiple sense primers to hybridize, extend, and displace downstream DNA, generating a large ramified (branching) DNA complex. Subsequent thermocycling denatures the dsDNA and initiates the next round of primer extension and ramification. This model results in significantly improved amplification kinetics (super-exponential) as compared to conventional PCR. Our results show that the C-probe was 1000 times more sensitive than the corresponding linear hemiprobes for detecting Epstein–Barr virus early RNA. The C-probe not only increases the power of amplification but also offers a means for decontaminating carryover amplicons. As the ligated C-probes possess no free termini, they are resistant to exonuclease digestion, whereas contaminated linear amplicons are susceptible to digestion. Treatment of the ligation reaction mixture with exonuclease prior to amplification eliminated the amplicon contaminant, which could also have been co-amplified with the same PCR primers; only the ligated C-probes were amplified. The combined advantages of the C-probe and thermocycling have a broad applicability for the detection of both DNA and RNA. Finally, we described a novel isothermal amplification method, ramification extension amplification, utilizing circular nature of C-probe and displacement activity of DNA polymerase.     

Genome-wide comparison of differences in the integration sites of interspersed repeats between closely related genomes

A technique for genome-wide detection of differences in the integration site positions of interspersed repeats in related genomes (DiffIR) is described. The technique is based on a whole- genome selective PCR amplification of the repeats’ flanking regions followed by a differential hybridization screening of the arrayed library of the selected amplicons. The technique was successfully applied to the comparison of the integration sites in the human and chimpanzee genomes, allowing us to discover 11 new human-specific integrations of human endogenous retrovirus, K family (HML-2) long terminal repeats.     

Covalent fusion inhibitors targeting HIV-1 gp41 deep pocket

Covalent inhibitors form covalent adducts with their target, thus permanently inhibiting a physiological process. Peptide fusion inhibitors, such as T20 (Fuzeon, enfuvirtide) and C34, interact with the N-terminal heptad repeat of human immunodeficiency virus type 1 (HIV-1) gp41 glycoprotein to form an inactive hetero six-helix bundle (6-HB) to prevent HIV-1 infection of host cells. A covalent strategy was applied to peptide fusion inhibitor design by introducing a thioester group into C34-like peptide. The modified peptide maintains the specific interaction with its target N36. After the 6-HB formation, a covalent bond between C- and N-peptides was formed by an inter-helical acyl transfer reaction, as characterized by various biophysical and biochemical methods. The covalent reaction between the reactive C-peptide fusion inhibitor and its N-peptide target is highly selective, and the reaction greatly increases the thermostability of the 6-HB. The modified peptide maintains high potency against HIV-1-mediated cell–cell fusion and infection.     

Detection of PCR amplicons from bacterial pathogens using microsphere agglutination

For rapid and inexpensive detection of polymerase chain reaction (PCR) amplicons, a novel microsphere agglutination assay has been developed. PCR is carried out using biotinylated forward and reverse primers, and the amplified DNA fragments are able to agglutinate streptavidin-coated microspheres (5.7 microm in diameter). Purification of PCR amplicons is unnecessary when initial primer concentrations are 250 nM. Agglutination can be identified visually within 2 min without any additional equipment or reagents. Using listeriolysin (lisA)-specific biotinylated primers, we have successfully detected and identified Listeria monocytogenes lisA+ cells among Salmonella typhimurium, Staphylococcus aureus, Campylobacter jejuni and Escherichia coli O157:H7 cells. The simplicity of this protocol considerably reduces the time and cost of diagnostic PCR experiments. This procedure is potentially useful for various studies and field applications.     

Rapid RAPD screening of plant DNA using dot blot hybridization

Scoring of the results of RAPD analysis using gel electrophoresis imposes a constraint on throughput. To circumvent this barrier, dot-blot hybridization was substituted for electrophoresis. Arbitrarily amplified fragments from barley and wheat genomic DNA were labelled and used as probes for the identification of identical fragments in subsequent amplification reactions. None of the twelve fragments used as probes exhibited significant levels of croos-hybridization to other fragments amplified by the same arbitrary primer. The strength of the hybridization signal facilitates more accurate and more sensitive detection of diagnostic fragments than gel electrophoresis. In addition, the defined spatial orientation (microtitre dish format) of the ± results provide an excellent format for automated data collection. The use of dot blot hybridization to analyse PCR products well decrease the cost and time requirements of marker-assisted selection. This technique will also facilitate the rapid application of PCR-based maps.     

Multiplex amplification of all coding sequences within 10 cancer genes by Gene-Collector

Herein we present Gene-Collector, a method for multiplex amplification of nucleic acids. The procedure has been employed to successfully amplify the coding sequence of 10 human cancer genes in one assay with uniform abundance of the final products. Amplification is initiated by a multiplex PCR in this case with 170 primer pairs. Each PCR product is then specifically circularized by ligation on a Collector probe capable of juxtapositioning only the perfectly matched cognate primer pairs. Any amplification artifacts typically associated with multiplex PCR derived from the use of many primer pairs such as false amplicons, primer-dimers etc. are not circularized and degraded by exonuclease treatment. Circular DNA molecules are then further enriched by randomly primed rolling circle replication. Amplification was successful for 90% of the targeted amplicons as seen by hybridization to a custom resequencing DNA micro-array. Real-time quantitative PCR revealed that 96% of the amplification products were all within 4-fold of the average abundance. Gene-Collector has utility for numerous applications such as high throughput resequencing, SNP analyses, and pathogen detection.     

DNA probes specific for Aeromonas hydrophila (HG1)

Aeromonas hydrophila (HG1)-specific RAPD-PCR fragments were investigated for their potential as DNA probes. From 20 RAPD-PCR fragment bands, it was found that two were specific to all isolates of Aeromonas hydrophila (HG1) tested. Cloning and nucleotide sequence determination of one of these bands showed that co-migration of similar sized amplicons had occurred and that this band (designated '7e') contained at least four fragments of different sequences. Three of these individual amplicons had a sequence specific to Aer. hydrophila (HG1) isolates. The sequence of one of these amplicons ('7e5') was used to design primers for a specific polymerase chain reaction (PCR). The specificity of the PCR was achieved using a modified hot-start procedure. The identity of the PCR amplicons was confirmed by high stringency hybridization with a digoxygenin-labelled 7e5 probe.     

Whole-genome experimental identification of insertion/deletion polymorphisms of interspersed repeats by a new general approach

A new experimental technique for genome-wide detection of integration sites of polymorphic retroelements (REs) is described. The technique allows one to reveal the absence of a retroelement in an individual genome provided that this retroelement is present in at least one of several other genomes under comparison. Since quite a number of genomes are compared simultaneously, the search for polymorphic REs insertions is very efficient. The technique includes two whole-genome selective PCR amplifications of sequences flanking REs: one for a particular genome and another one for a mixture of ten different genomes. A subsequent subtractive hybridization of the obtained amplicons with DNA of a particular genome as driver results in isolation of polymorphic insertions. The technique was successfully applied for identification of 41 new polymorphic human AluYa5/Ya8 insertions. Among them, 18 individual Alu elements first sequenced in this work were not found in the available human genome databases. This result suggests that significant part of polymorphic REs were not identified during genome sequencing and remain to be detected and characterized. The proposed method does not depend on preliminary knowledge of evolutionary history of retroelements and can be applied for identification of insertion/deletion polymorphic markers in genomes of different species.     

Cloth-based hybridization array system for the detection of multiple antibiotic resistance genes in Salmonella enterica subsp. enterica serotype Typhimurium DT104

AIMS: A simple DNA macroarray system was developed for detection of antibiotic resistance and other marker genes associated with the multidrug-resistant food pathogen Salmonella enterica subsp. enterica serotype Typhimurium DT104. METHODS AND RESULTS: A multiplex polymerase chain reaction (PCR) incorporating digoxigenin-dUTP was used to simultaneously amplify seven marker sequences, with subsequent rapid detection of the amplicons by hybridization with an array of probes immobilized on polyester cloth and immunoenzymatic assay of the bound label. This system provided sensitive detection of the different genetic markers in the S. Typhimurium DT104 genome, giving positive reactions with as few as 10 CFU, and the hybridizations were highly specific, with no reactions of amplicons with heterologous probes on the array. CONCLUSIONS: This cloth-based hybridization array system (CHAS) provides a simple, cost-effective tool for monitoring S. Typhimurium DT104 in foods and their production environment. SIGNIFICANCE AND IMPACT OF THE STUDY: The CHAS is a simple and cost-effective tool for the simultaneous detection of amplicons generated in a multiplex PCR, and the concept is broadly applicable to the detection and characterization of food pathogens.