Alteration of the C-Terminal Ligand Specificity of the Erbin PDZ Domain by Allosteric Mutational Effects

Modulation of protein binding specificity is important for basic biology and for applied science. Here we explore how binding specificity is conveyed in PDZ (postsynaptic density protein-95/discs large/zonula occludens-1) domains, small interaction modules that recognize various proteins by binding to an extended C terminus. Our goal was to engineer variants of the Erbin PDZ domain with altered specificity for the most C-terminal position (position 0) where a Val is strongly preferred by the wild-type domain. We constructed a library of PDZ domains by randomizing residues in direct contact with position 0 and in a loop that is close to but does not contact position 0. We used phage display to select for PDZ variants that bind to 19 peptide ligands differing only at position 0. To verify that each obtained PDZ domain exhibited the correct binding specificity, we selected peptide ligands for each domain. Despite intensive efforts, we were only able to evolve Erbin PDZ domain variants with selectivity for the aliphatic C-terminal side chains Val, Ile and Leu. Interestingly, many PDZ domains with these three distinct specificities contained identical amino acids at positions that directly contact position 0 but differed in the loop that does not contact position 0. Computational modeling of the selected PDZ domains shows how slight conformational changes in the loop region propagate to the binding site and result in different binding specificities. Our results demonstrate that second-sphere residues could be crucial in determining protein binding specificity.     

Combinatorial Enzyme Design Probes Allostery and Cooperativity in the Trypsin Fold

Converting one enzyme into another is challenging due to the uneven distribution of important amino acids for function in both protein sequence and structure. We report a strategy for protein engineering allowing an organized mixing and matching of genetic material that leverages lower throughput with increased quality of screens. Our approach successfully tested the contribution of each surface-exposed loop in the trypsin fold alone and the cooperativity of their combinations towards building the substrate selectivity and Na⁺-dependent allosteric activation of the protease domain of human coagulation factor Xa into a bacterial trypsin. As the created proteases lack additional protein domains and protein co-factor activation mechanism requisite for the complexity of blood coagulation, they are stepping-stones towards further understanding and engineering of artificial clotting factors.     

Unscrambling thermal stability and temperature adaptation in evolved variants of a cold-active lipase

Directed evolution by error-prone PCR was applied to stabilize the cold-active lipase from Pseudomonas fragi (PFL). PFL displays high activity at 10 degrees C, but it is highly unstable even at moderate temperatures. After two rounds of evolution, a variant was generated with a 5-fold increase in half-life at 42 degrees C and a shift of 10 degrees C in the temperature optimum, nevertheless retaining cold-activity. The evolved lipase displayed specific activity higher than the wild type enzyme in the temperature range 29-42 degrees C. Biophysical measurements did not indicate any obvious difference between the improved variant and the wild type enzyme in terms of loss of secondary structure upon heat treatment, nor a shift in the apparent melting temperature.     

Ribosomal Interaction of Bacillus stearothermophilus Translation Initiation Factor IF2: Characterization of the Active Sites

InfB-encoded translation initiation factor IF2 contains a non-conserved N-terminal domain and two conserved domains (G and C) constituted by three (G1, G2 and G3) and two (C1 and C2) sub-domains. Here, we show that: (i) Bacillus stearothermophilus IF2 complements in vivo an Escherichia coli infB null mutation and (ii) the N-domain of B. stearothermophilus IF2, like that of E. coli IF2, provides a strong yet dispensable interaction with 30 S and 50 S subunits in spite of the lack of any size, sequence or structural homology between the N-domains of the two factors. Furthermore, the nature of the B. stearothermophilus IF2 sites involved in establishing the functional interactions with the ribosome was investigated by generating deletion, random and site-directed mutations within sub-domains G2 or G3 of a molecule carrying an H301Y substitution in switch II of the G2 module, which impairs the ribosome-dependent GTPase activity of IF2. By selecting suppressors of the dominant-lethal phenotype caused by the H301Y substitution, three independent mutants impaired in ribosome binding were identified; namely, S387P (in G2) and G420E and E424K (in G3). The functional properties of these mutants and those of the deletion mutants are compatible with the premise that IF2 interacts with 30 S and 50 S subunits via G3 and G2 modules, respectively. However, beyond this generalization, because the mutation in G2 resulted in a functional alteration of G3 and vice versa, our results indicate the existence of extensive “cross-talking” between these two modules, highlighting a harmonic conformational cooperation between G2 and G3 required for a functional interaction between IF2 and the two ribosomal subunits. It is noteworthy that the E424K mutant, which completely lacks GTPase activity, displays IF2 wild-type capacity in supporting initiation of dipeptide formation.     

Functionally important residues of the Tet repressor inducing peptide TIP determined by a complete mutational analysis

Tet repressor (TetR) is widely used to control gene expression in pro- and eukaryotes. The mechanism of induction by its natural inducer tetracycline is well characterized. A 16-mer oligopeptide, called TIP, fused to thioredoxin A (TrxA) of Escherichia coli is an artificial inducer of TetR. We analyzed the sequence requirements of TIP by directed and random single amino acid substitutions and identified residues important for TetR induction. An alanine scanning analysis of the first twelve residues showed that all except the ones at position eleven and twelve are important for induction. A randomization of residues at positions one to twelve of TIP revealed the properties of each residue necessary for induction. These further insights into the specificity of TIP-TetR interaction are discussed in the light of the X-ray structure of the [TetR-TIP] complex. The last four residues of TIP contribute indirectly to TetR induction by increasing the steady-state level of the fusion protein. TIP mutants fused N-terminally or C-terminally to TrxA in E. coli induce with the same efficiency indicating identical binding and induction mechanisms, and the lack of contribution from TrxA.     

Mechanism of origin activation by monomers of R6K-encoded pi protein

One recurring theme in plasmid duplication is the recognition of the origin of replication (ori) by specific Rep proteins that bind to DNA sequences called iterons. For plasmid R6K, this process involves a complex interplay between monomers and dimers of the Rep protein, pi, with seven tandem iterons of gamma ori. Remarkably, both pi monomers and pi dimers can bind to iterons, a new paradigm in replication control. Dimers, the predominant form in the cell, inhibit replication, while monomers facilitate open complex formation and activate the ori. Here, we investigate a mechanism by which pi monomers out-compete pi dimers for iteron binding, and in so doing activate the ori. With an in vivo plasmid incompatibility assay, we find that pi monomers bind cooperatively to two adjacent iterons. Cooperative binding is eliminated by insertion of a half-helical turn between two iterons but is diminished only slightly by insertion of a full helical turn between two iterons. These studies show also that pi bound to a consensus site promotes occupancy of an adjacent mutated site, another hallmark of cooperative interactions. pi monomer/iteron interactions were quantified using a monomer-biased pi variant in vitro with the same collection of two-iteron constructs. The cooperativity coefficients mirror the plasmid incompatibility results for each construct tested. pi dimer/iteron interactions were quantified with a dimer-biased mutant in vitro and it was found that pi dimers bind with negligible cooperativity to two tandem iterons.     

Configurational entropy modulates the mechanical stability of protein GB1

Configurational entropy plays important roles in defining the thermodynamic stability as well as the folding/unfolding kinetics of proteins. Here we combine single-molecule atomic force microscopy and protein engineering techniques to directly examine the role of configurational entropy in the mechanical unfolding kinetics and mechanical stability of proteins. We used a small protein, GB1, as a model system and constructed four mutants that elongate loop 2 of GB1 by 2, 5, 24 and 46 flexible residues, respectively. These loop elongation mutants fold properly as determined by far-UV circular dichroism spectroscopy, suggesting that loop 2 is well tolerant of loop insertions without affecting GB1′s native structure. Our single-molecule atomic force microscopy results reveal that loop elongation decreases the mechanical stability of GB1 and accelerates the mechanical unfolding kinetics. These results can be explained by the loss of configurational entropy upon closing an unstructured flexible loop using classical polymer theory, highlighting the important role of loop regions in the mechanical unfolding of proteins. This study not only demonstrates a general approach to investigating the structural deformation of the loop regions in mechanical unfolding transition state, but also provides the foundation to use configurational entropy as an effective means to modulate the mechanical stability of proteins, which is of critical importance towards engineering artificial elastomeric proteins with tailored nanomechanical properties.     

Conversion of barley SNPs into PCR-based markers using dCAPS method

Molecular genetic research relies heavily on the ability to detect polymorphisms in DNA. Single nucleotide polymorphisms (SNPs) are the most frequent form of DNA variation in the genome. In combination with a PCR assay, the corresponding SNP can be analyzed as a derived cleaved amplified polymorphic sequence (dCAPS) marker. The dCAPS method exploits the well-known specificity of a restriction endonuclease for its recognition site and can be used to virtually detect any SNP. Here, we describe the use of the dCAPS method for detecting single-nucleotide changes by means of a barley EST, CK569932, PCR-based marker.     

Structural and kinetic analysis of caspase-3 reveals role for s5 binding site in substrate recognition

The molecular basis for the substrate specificity of human caspase-3 has been investigated using peptide analog inhibitors and substrates that vary at the P2, P3, and P5 positions. Crystal structures were determined of caspase-3 complexes with the substrate analogs at resolutions of 1.7 A to 2.3 A. Differences in the interactions of caspase-3 with the analogs are consistent with the Ki values of 1.3 nM, 6.5 nM, and 12.4 nM for Ac-DEVD-Cho, Ac-VDVAD-Cho and Ac-DMQD-Cho, respectively, and relative kcat/Km values of 100%, 37% and 17% for the corresponding peptide substrates. The bound peptide analogs show very similar interactions for the main-chain atoms and the conserved P1 Asp and P4 Asp, while interactions vary for P2 and P3. P2 lies in a hydrophobic S2 groove, consistent with the weaker inhibition of Ac-DMQD-Cho with polar P2 Gln. S3 is a surface hydrophilic site with favorable polar interactions with P3 Glu in Ac-DEVD-Cho. Ac-DMQD-Cho and Ac-VDVAD-Cho have hydrophobic P3 residues that are not optimal in the polar S3 site, consistent with their weaker inhibition. A hydrophobic S5 site was identified for caspase-3, where the side-chains of Phe250 and Phe252 interact with P5 Val of Ac-VDVAD-Cho, and enclose the substrate-binding site by conformational change. The kinetic importance of hydrophobic P5 residues was confirmed by more efficient hydrolysis of caspase-3 substrates Ac-VDVAD-pNA and Ac-LDVAD-pNA compared with Ac-DVAD-pNA. In contrast, caspase-7 showed less efficient hydrolysis of the substrates with P5 Val or Leu compared with Ac-DVAD-pNA. Caspase-3 and caspase-2 share similar hydrophobic S5 sites, while caspases 1, 7, 8 and 9 do not have structurally equivalent hydrophobic residues; these caspases are likely to differ in their selectivity for the P5 position of substrates. The distinct selectivity for P5 will help define the particular substrates and signaling pathways associated with each caspase.     

Intramolecular Donor Strand Complementation in the E. coli Type 1 Pilus Subunit FimA Explains the Existence of FimA Monomers As Off-Pathway Products of Pilus Assembly That Inhibit Host Cell Apoptosis

Type 1 pili are filamentous organelles mediating the attachment of uropathogenic Escherichia coli to epithelial cells of host organisms. The helical pilus rod consists of up to 3000 copies of the main structural subunit FimA that interact via donor strand complementation, where the incomplete Ig-like fold of FimA is completed by insertion of the N-terminal extension (donor strand) of the following FimA subunit. Recently, it was shown that FimA also exists in a monomeric, assembly-incompetent form and that FimA monomers act as inhibitors of apoptosis in infected host cells. Here we present the NMR structure of monomeric wild-type FimA with its natural N-terminal donor strand complementing the Ig fold. Compared to FimA subunits in the assembled pilus, intramolecular self-complementation in the monomer stabilizes the FimA fold with significantly less interactions, and the natural FimA donor strand is inserted in the opposite orientation. In addition, we show that a motif of two glycine residues in the FimA donor strand, separated by five residues, is the prerequisite of the alternative, parallel donor strand insertion mechanism in the FimA monomer and that this motif is preserved in FimA homologs of many enteroinvasive pathogens. We conclude that FimA is a unique case of a protein with alternative, functionally relevant folding possibilities, with the FimA polymer forming the highly stable pilus rod and the FimA monomer promoting pathogen propagation by apoptosis suppression of infected epithelial target cells.     

Purified Membrane-Containing Procapsids of Bacteriophage PRD1 Package the Viral Genome

Icosahedral-tailed double-stranded DNA (dsDNA) bacteriophages and herpesviruses translocate viral DNA into a preformed procapsid in an ATP-driven reaction by a packaging complex that operates at a portal vertex. A similar packaging system operates in the tailless dsDNA phage PRD1 (Tectiviridae family), except that there is an internal membrane vesicle in the procapsid. The unit-length linear dsDNA genome with covalently linked 5′-terminal proteins enters the procapsid through a unique vertex. Two small integral membrane proteins, P20 and P22, provide a conduit for DNA translocation. The packaging machinery also contains the packaging ATPase P9 and the packaging efficiency factor P6. Here we describe a method used to obtain purified packaging-competent PRD1 procapsids. The optimized in vitro packaging system allowed efficient packaging of defined DNA substrates. We determined that the genome terminal protein P8 is necessary for packaging and provided an estimation of the packaging rate.     

Partial Purification and Properties of a Cysteine Protease from Citrus Red Mite Panonychus citri

Several studies have reported that the citrus red mites Panonychus citri were an important allergen of citrus-cultivating farmers in Jeju Island. The aim of the present study was to purify and assess properties of a cysteine protease from the mites acting as a potentially pathogenic factor to citrus-cultivating farmers. A cysteine protease was purified using column chromatography of Mono Q anion exchanger and Superdex 200 HR gel filtration. It was estimated to be 46 kDa by gel filtration column chromatography and consisted of 2 polypeptides, at least. Cysteine protease inhibitors, such as trans poxy-succinyl-L-leucyl-amido (4-guanidino) butane (E-64) and iodoacetic acid (IAA) totally inhibited the enzyme activities, whereas serine or metalloprotease inhibitors did not affect the activities. In addition, the purified enzyme degraded human IgG, collagen, and fibronectin, but not egg albumin. From these results, the cysteine protease of the mites might be involved in the pathogenesis such as tissue destruction and penetration instead of nutrient digestion.     

A genetic resource for early-morning flowering trait of wild rice Oryza officinalis to mitigate high temperature-induced spikelet sterility at anthesis

Background and Aims

High temperatures over 32–36 °C at anthesis induce spikelet sterility in rice. The use of a germplasm with an early-morning flowering (EMF) trait has been hypothesized as a way of avoiding this problem. In this study, the effect of the EMF trait on avoiding high temperature-induced sterility at anthesis by flowering at a cooler temperature in the early morning was evaluated.

Methods

The EMF trait was introgressed from wild rice (Oryza officinalis) into the rice cultivar ‘Koshihikari’ (O. sativa). First, spikelets of the EMF line and Koshihikari were subjected to rising temperatures during the daytime in the greenhouse to test for differences in spikelet sterility. Secondly, spikelets of both plants were exposed to 26, 34 and 38 °C at anthesis and to 38 °C beginning at least 1 h after flowering, in the growth chambers at 70 % relative humidity, to test for differences in tolerance to high temperatures.

Key Results

Spikelets of the EMF line started and completed flowering a few hours earlier than Koshihikari. In a greenhouse experiment, spikelets of Koshihikari opened after the air temperature reached 35 °C, but those of the EMF line could open at cooler temperatures. Under these conditions, spikelet sterility significantly increased in Koshihikari, but did not in the EMF line. The number of sterile spikelets increased as their flowering time was delayed in Koshihikari. Furthermore, the chamber experiments revealed that 60 % of the spikelets from both lines were sterile when exposed to 38 °C at anthesis, indicating that tolerance of high temperature was similar in both genotypes.

Conclusions

Reduced sterility in the EMF line subjected to rising temperatures at anthesis in the greenhouse was attributed to an earlier flowering time compared with Koshihikari. The EMF trait of wild rice is effective in mitigating anticipated yield loss due to global warming by escaping high-temperature stress at anthesis during the daytime.     

Structure of 2,6-dihydroxypyridine 3-hydroxylase from a nicotine-degrading pathway

The enzyme 2,6-dihydroxypyridine-3-hydroxylase catalyzes the sixth step of the nicotine degradation pathway in Arthrobacter nicotinovorans. The enzyme was produced in Escherichia coli, purified and crystallized. The crystal structure was solved at 2.6 Å resolution, revealing a significant structural relationship with the family of FAD-dependent aromatic hydroxylases, but essentially no sequence homology. The structure was aligned with those of the established family members, showing that the FAD molecules are bound at virtually identical locations. The reported enzyme is a dimer like most other family members, but its dimerization contact differs from the others. The binding position of NAD(P)H to this enzyme family is not clear. Since the reported enzyme accepts only NADH for flavin reduction in contrast to the other established members using NADPH, we searched through the structural alignment and found an indication for the position of the 2′-phosphate of NADPH that is in general agreement with mutational studies on a related enzyme, but contradicts a crystal soaking experiment. Using a bound glycerol molecule and the known substrate positions of three related enzymes as a guide, the substrate 2,6-dihydroxypyridine was placed into the active center. The access to the binding site is discussed. The new active center geometry introduces constraints that render some reaction scenarios more likely than others. It suggests that flavin is reduced at its out-position and then drawn into its in-position, where it binds molecular oxygen. The geometry is consistent with the proposal that peroxy-flavin is protonated by the solvent to yield the electrophilic hydroperoxy-flavin. The substrate is activated by two buried histidines but there is no appropriate base to store the surplus proton of the hydroxylated carbon atom. The implications of this problem are discussed.     

Activation of Drosophila sodium channels promotes modification by deltamethrin. Reductions in affinity caused by knock-down resistance mutations

kdr and super-kdr are mutations in houseflies and other insects that confer 30- and 500-fold resistance to the pyrethroid deltamethrin. They correspond to single (L1014F) and double (L1014F+M918T) mutations in segment IIS6 and linker II(S4-S5) of Na channels. We expressed Drosophila para Na channels with and without these mutations and characterized their modification by deltamethrin. All wild-type channels can be modified by <10 nM deltamethrin, but high affinity binding requires channel opening: (a) modification is promoted more by trains of brief depolarizations than by a single long depolarization, (b) the voltage dependence of modification parallels that of channel opening, and (c) modification is promoted by toxin II from Anemonia sulcata, which slows inactivation. The mutations reduce channel opening by enhancing closed-state inactivation. In addition, these mutations reduce the affinity for open channels by 20- and 100-fold, respectively. Deltamethrin inhibits channel closing and the mutations reduce the time that channels remain open once drug has bound. The super-kdr mutations effectively reduce the number of deltamethrin binding sites per channel from two to one. Thus, the mutations reduce both the potency and efficacy of insecticide action.     

Diagnostic Efficacy of a Recombinant Cysteine Protease of Spirometra erinacei Larvae for Serodiagnosis of Sparganosis

The mature domain of a cysteine protease of Spirometra erinacei plerocercoid larva (i.e., sparganum) was expressed in Escherichia coli, and its value as an antigen for the serodiagnosis of sparganosis was investigated. The recombinant protein (rSepCp-1) has the molecular weight of 23.4 kDa, and strongly reacted with the sparganum positive human or mice sera but not with negative sera by immunoblotting. ELISA with rSepCp-1 protein or sparganum crude antigen (SeC) was evaluated for the serodiagnosis of sparganosis using patient''s sera. The sensitivity and specificity of ELISA using rSepCp-1 protein were 95.0% (19/20) and 99.1% (111/112), respectively. In contrast, the sensitivity and specificity of ELISA with SeC were 100% (20/20) and 96.4% (108/112), respectively. Moreover, in experimentally infected mice, the sensitivity and specificity of both ELISA assays were 100% for the detection of anti-sparganum IgG. It is suggested that the rSepCp-1 protein-based ELISA could provide a highly sensitive and specific assay for the diagnosis of sparganosis.     

Genetic Analysis of Resistance to Meloidogyne chitwoodi Introgressed from Solanum hougasii into Cultivated Potato

An accession of Solanum hougasii, a wild tuber-bearing potato species native to Mexico, was found to be resistant to races 1 and 2 of Meloidogyne chitwoodi. A resistant selection was selfed and its progeny possessed the same combined resistance uniformly. A selected resistant seedling from the selfed progeny was crossed to cultivated tetraploid potato (S. tuberosum) to form an F₁ hybrid, and was backcrossed to cultivated tetraploid potato to form a BC₁ population in which resistance to the two races segregated. Progeny of the BC₁ were tested in inoculation experiments with four replicates for each progeny genotype for each race of nematode. Resistance was evaluated on the basis of extracted egg counts from the entire root system of pot-grown plants. Considering resistance to each race separately, for race 1, non-host (Rf ≤ 0.1) status was exhibited by approximately half of the BC₁. About one-third of the progeny showed non-host status to race 2. Egg production among progeny that showed non-host status for both races was higher with race 2 than with race 1. Analysis of co-segregation established that genetic control for the two races appears to be independently segregating. Although genes for resistance to race 1 derived from S. bulbocastanum and S. fendleri were previously described, this report is the first analysis showing independent genetic control in Solanum spp. for resistance to race 2 of M. chitwoodi only.     

Conformational Conversion May Precede or Follow Aggregate Elongation on Alternative Pathways of Amyloid Protofibril Formation

A major goal in the study of protein aggregation is to understand how the conformational heterogeneity characteristic of the process leads to structurally distinct amyloid fibrils. The small protein barstar is known to form amyloid protofibrils in multiple steps at low pH: a small oligomer, the A-form, first transforms into a larger spherical higher oligomeric intermediate (HOI), which then self-associates to form the elongated protofibril. To determine how the conformational conversion reaction during aggregation is coupled to the process of protofibril formation, cysteine-scanning mutagenesis was first used to identify specific residue positions in the protein sequence, which are important in defining the nature of the aggregation process. Two classes of mutant proteins, which are distinguished by their kinetics of aggregation at high protein concentration, have been identified: Class I mutant proteins undergo conformational conversion, as measured by an increase in thioflavin T binding ability and an increase in circular dichroism at 216 nm, significantly faster than Class II mutant proteins. At low protein concentration, the rates of conformational conversion are, however, identical for both classes of mutant proteins. At high protein concentration, the two classes of mutant proteins can be further distinguished on the basis of their rates of protofibril growth, as determined from dynamic light-scattering measurements. For Class I mutant proteins, protofibril elongation occurs at the same, or slightly faster, rate than conformational conversion. For Class II mutant proteins, protofibril elongation is significantly slower than conformational conversion. Dynamic light scattering measurements and atomic force microscopy imaging indicate that for the Class I mutant proteins, conformational conversion occurs concurrently with the self-association of prefibrillar HOIs into protofibrils. On the other hand, for the Class II mutant proteins, the prefibrillar HOI first undergoes conformational conversion, and the conformationally converted HOIs then self-associate to form protofibrils. The two classes of mutant proteins appear, therefore, to use structurally distinct pathways to form amyloid protofibrils. On one pathway, conformational conversion occurs along with, or after, elongation of the oligomers; on the other pathway, conformational conversion precedes elongation of the oligomers. Single mutations in the protein can cause aggregation to switch from one pathway to the other. Importantly, the protofibrils formed by the two classes of mutant proteins have significantly different diameters and different internal structures.     

Functional coupling between a distal interaction and the cleavage site in bacterial RNase-P-RNA-mediated cleavage

Bacterial RNase P consists of one protein and one RNA [RNase P RNA (RPR)]. RPR can process tRNA precursors correctly in the absence of the protein. Here we have used model hairpin loop substrates corresponding to the acceptor, T-stem, and T-loop of a precursor tRNA to study the importance of the T-loop structure in RPR-alone reaction. T-stem/loop (TSL) interacts with a region in RPR [TSL binding site (TBS)], forming TSL/TBS interaction. Altering the T-loop structure affects both cleavage site selection and rate of cleavage at the correct site + 1 and at the alternative site − 1. The magnitude of variation depended on the structures of the T-loop and the TBS region, with as much as a 150-fold reduction in the rate of cleavage at + 1. Interestingly, for one T-loop structure mutant, no difference in the rate at − 1 was detected compared to cleavage of the substrate with an unchanged T-loop, indicating that, in this case, the altered T-loop structure primarily influences events required for efficient cleavage at the correct site + 1. We also provide data supporting a functional link between a productive TSL/TBS interaction and events at the cleavage site. Collectively, our findings emphasize the interplay between separate regions upon formation of a productive RPR substrate that leads to efficient and accurate cleavage. These new data provide support for an induced-fit mechanism in bacterial RPR-mediated cleavage at the correct site + 1.