Structure and conformation of the disulfide bond in dimeric lung surfactant peptides SP-B1-25 and SP-B8-25

Raman spectroscopy was used to determine the conformation of the disulfide linkage between cysteine residues in the homodimeric construct of the N-terminal alpha helical domain of surfactant protein B (dSP-B_1-25). The conformation of the disulfide bond between cysteine residues in position 8 of the homodimer of dSP-B_1-25 was compared with that of a truncated homodimer (dSP-B_8-25) of the peptide having a disulfide linkage at the same position in the alpha helix. Temperature-dependent Raman spectra of the S-S stretching region centered at ∼ 500 cm^− 1 indicated a stable, although highly strained disulfide conformation with a χ(CS-SC) dihedral angle of ± 10° for the dSP-B_1-25 dimer. In contrast, the truncated dimer dSP-B_8-25 exhibited a series of disulfide conformations with the χ(CS-SC) dihedral angle taking on values of either ± 30° or 85± 20°. For conformations with χ(CS-SC) close to the ± 90° value, the Raman spectra of the 8-25 truncated dimers exhibited χ(SS-CC) dihedral angles of 90/180° and 20-30°. In the presence of a lipid mixture, both constructs showed a ν(S-S) band at ∼ 488 cm^− 1, corresponding to a χ(CS-SC) dihedral angle of ± 10°. Polarized infrared spectroscopy was also used to determine the orientation of the helix and β-sheet portion of both synthetic peptides. These calculations indicated that the helix was oriented primarily in the plane of the surface, at an angle of ∼ 60-70° to the surface normal, while the β structure had ∼ 40° tilt. This orientation direction did not change in the presence of a lipid mixture or with temperature. These observations suggest that: (i) the conformational flexibility of the disulfide linkage is dependent on the amino acid residues that flank the cysteine disulfide bond, and (ii) in both constructs, the presence of a lipid matrix locks the disulfide bond into a preferred conformation.     

High-pressure SANS and fluorescence unfolding study of calmodulin

Apo-calmodulin, a small soluble mainly α protein, is a calcium-dependent protein activator. Calcium binding affects the calmodulin conformation but also its stability. Calcium free form unfolds between 40 and 80 °C, whereas the calcium-saturated form is stable up to temperatures as high as 100 °C, forbidding comparison of the thermal unfolding pathways of the two forms. Thus, this paper focuses especially on the conformation of pressure-induced unfolding states of both forms of calmodulin, by combining small-angle neutron scattering (SANS) with biophysical techniques such as tyrosines and ANS fluorescence. In contrast to heat denaturation (Gibrat et al., BBA, 2012), the pressure denaturation of calmodulin is reversible up to pressures of 3000 bar (300 MPa). A pressure-induced compact intermediate state has been found for the two calmodulin forms, but their unfolding pathways are different. A domain compaction and an increase of the ANS fluorescence of holo form have been evidenced. On the contrary, a domain dilatation and an ANS fluorescence decrease have been found for the apo form. The pressure induced an increase of the interdomain distance for both calmodulin forms, suggesting that the central linker of calmodulin is flexible in solution.     

Structural Insights into Yeast DNA Polymerase δ by Small Angle X-ray Scattering

DNA polymerase δ (Polδ) is a multisubunit polymerase that plays an indispensable role in replication from yeast to humans. Polδ from Saccharomyces cerevisiae is composed of three subunits: Pol3, Pol31, and Pol32. Despite the elucidation of the structures and models of the individual subunits (or portions, thereof), the nature of their assembly remains unclear. We present here a small-angle X-ray scattering analysis of a yeast Polδ complex (Polδ_T) composed of Pol3, Pol31, and Pol32N (amino acids 1-103 of Pol32). From the small angle X-ray scattering global parameters and reconstructed envelopes, we show that Polδ_T adopts an elongated conformation with a radius of gyration (R_g) of ∼ 52 Å and a maximal dimension of ∼ 190 Å. We also propose an orientation for the accessory Pol31-Pol32N subunits relative to the Pol3 catalytic core that best agrees with the experimental scattering profile. The analysis also points to significant conformational variability that may allow Polδ to better coordinate its action with other proteins at the replication fork.     

Determination of the Individual Roles of the Linker Residues in the Interdomain Motions of Calmodulin Using NMR Chemical Shifts

Many protein molecules are formed by two or more domains whose structures and dynamics are closely related to their biological functions. It is thus important to develop methods to determine the structural properties of these multidomain proteins. Here, we characterize the interdomain motions in the calcium-bound state of calmodulin (Ca^2 +-CaM) using NMR chemical shifts as replica-averaged structural restraints in molecular dynamics simulations. We find that the conformational fluctuations of the interdomain linker, which are largely responsible for the overall interdomain motions of CaM, can be well described by exploiting the information provided by chemical shifts. We thus identify 10 residues in the interdomain linker region that change their conformations upon substrate binding. Five of these residues (Met76, Lys77, Thr79, Asp80 and Ser81) are highly flexible and cover the range of conformations observed in the substrate-bound state, while the remaining five (Arg74, Lys75, Asp78, Glu82 and Glu83) are much more rigid and do not populate conformations typical of the substrate-bound form. The ensemble of conformations representing the Ca^2 +-CaM state obtained in this study is in good agreement with residual dipolar coupling, paramagnetic resonance enhancement, small-angle X-ray scattering and fluorescence resonance energy transfer measurements, which were not used as restraints in the calculations. These results provide initial evidence that chemical shifts can be used to characterize the conformational fluctuations of multidomain proteins.     

Hydrophobic thickness, lipid surface area and polar region hydration in monounsaturated diacylphosphatidylcholine bilayers: SANS study of effects of cholesterol and β-sitosterol in unilamellar vesicles

The influence of a mammalian sterol cholesterol and a plant sterol β-sitosterol on the structural parameters and hydration of bilayers in unilamellar vesicles made of monounsaturated diacylphosphatidylcholines (diCn:1PC, n = 14-22 is the even number of acyl chain carbons) was studied at 30 °C using small-angle neutron scattering (SANS). Recently published advanced model of lipid bilayer as a three-strip structure was used with a triangular shape of polar head group probability distribution (Ku?erka et al., Models to analyze small-angle neutron scattering from unilamellar lipid vesicles, Physical Review E 69 (2004) Art. No. 051903). It was found that 33 mol% of both sterols increased the thickness of diCn:1PC bilayers with n = 18-22 similarly. β-sitosterol increased the thickness of diC14:1PC and diC16:1PC bilayers a little more than cholesterol. Both sterols increased the surface area per unit cell by cca 12 Å² and the number of water molecules located in the head group region by cca 4 molecules, irrespective to the acyl chain length of diCn:1PC. The structural difference in the side chain between cholesterol and β-sitosterol plays a negligible role in influencing the structural parameters of bilayers studied.     

Synthesis, structure and redox properties of an unexpected trinuclear copper(II) complex with aspartame: [Cu(apm)2Cu(μ-N,O:O′-apm)2(H2O)Cu(apm)2(H2O)] · 5H2O

Structural, magnetic and spectroscopic data of a new trinuclear copper(II) complex with the ligand aspartame (apm) are described. [Cu(apm)₂Cu(μ-N,O:O′-apm)₂(H₂O)Cu(apm)₂(H₂O)] · 5H₂O crystallizes in the triclinic system, space group P1 (#1) with a = 7.3300(1) Å, b = 15.6840(1) Å, c = 21.5280(1) Å, α = 93.02(1)°, β = 93.21(1)°, γ = 92.66(1)° and Z = 1. Aspartame coordinates to Cu(II) through the carboxylate and β-amino groups. The carboxylate groups of the two central ligands act as bidentate bridges in a syn-anti conformation while the carboxylate groups of the four peripheral ligands are monodentate in a syn conformation. The central copper ion is in a distorted square pyramidal geometry with the apical position being occupied by one oxygen atom of the water molecule. The two terminal copper(II) atoms are coordinated to the ligands in the same position but their coordination sphere differs from each other due to the fact that one copper atom has a water molecule in an apical position leading to an octahedral coordination sphere while the other copper atom is exclusively coordinated to aspartame ligands forming a distorted square pyramidal coordination sphere. Thermal analysis is consistent with the X-ray structure. EPR spectra and CV curves indicate a rupture of the trinuclear framework when this complex is dissolved in ethanol or DMF, forming a mononuclear species, with a tetragonal structure.     

Reverse Conformational Changes of the Light Chain-Binding Domain of Myosin V and VI Processive Motor Heads during and after Hydrolysis of ATP by Small-Angle X-Ray Solution Scattering

We used small-angle X-ray solution scattering (SAXS) technique to investigate the nucleotide-mediated conformational changes of the head domains [subfragment 1 (S1)] of myosin V and VI processive motors that govern their directional preference for motility on actin. Recombinant myosin V-S1 with two IQ motifs (MV-S1IQ2) and myosin VI-S1 (MVI-S1) were engineered from Sf9 cells using a baculovirus expression system. The radii of gyration (R_g) of nucleotide-free MV-S1IQ2 and MVI-S1 were 48.6 and 48.8 Å, respectively. In the presence of ATP, the R_g value of MV-S1IQ2 decreased to 46.7 Å, while that of MVI-S1 increased to 51.7 Å, and the maximum chord length of the molecule decreased by ca 9% for MV-S1IQ2 and increased by ca 6% for MVI-S1. These opposite directional changes were consistent with those occurring in S1s with ADP and Vi or AlF₄^− 2 bound (i.e., in states mimicking the ADP/Pi-bound state of ATP hydrolysis). Binding of AMPPNP induced R_g changes of both constructs similar to those in the presence of ATP, suggesting that the timing of the structural changes for their motion on actin is upon binding of ATP (the pre-hydrolysis state) during the ATPase cycle. Binding of ADP to MV-S1IQ2 and MVI-S1 caused their R_g values to drop below those in the nucleotide-free state. Thus, upon the release of Pi, the reverse conformational change could occur, coupling to drive the directional motion on actin. The amount of R_g change upon the release of Pi was ca 6.4 times greater in MVI-S1 than in MV-S1IQ2, relating to the production of the large stroke of the MVI motor during its translocation on actin. Atomic structural models for these S1s based upon the ab initio shape reconstruction from X-ray scattering data were constructed, showing that MVI-S1 has the light-chain-binding domain positioned in the opposite direction to MV-S1IQ2 in both the pre- and post-powerstroke transition. The angular change between the light chain-binding domains of MV-S1IQ2 in the pre- to post-powerstroke transition was ∼ 50°, comparable to that of MII-S1. On the other hand, that of MVI-S1 was ∼ 100° or ∼ 130° much less than the currently postulated changes to allow the maximal stroke size of myosin VI-S1 but still significantly larger than those of other myosins reported so far. The results suggest that some additional alterations or elements are required for MVI-S1 to take maximal working strokes along the actin filament.     

Structural polymorphism of oligomeric adiponectin visualized by electron microscopy

Adiponectin, a macromolecular complex similar to the members of the C1q and other collagenous homologues, elicits diverse biological functions, including anti-diabetes, anti-atherosclerosis, anti-inflammation and anti-tumor activities, which have been directly linked to the high molecular weight (HMW) oligomeric structures formed by multiples of adiponectin trimers. Here, we report the 3-D reconstructions of isolated full-length, recombinant murine C39A adiponectin trimer and hexamer of wild-type trimers (the major HMW form) determined by single-particle analysis of electron micrographs. The pleiomorphic ensemble of collagen-like stretches of the trimers leads to a dynamic structure of HMW that partition into two major classes, the fan-shaped (class I) and bouquet-shaped (class II). In both of these, while the N termini cluster into a compact ellipsoid-shaped (∼ 60 Å × 45 Å × 45 Å) volume, the collagenous domains assume a variety of arrangements. The domains are splayed by up to ∼ 90° in class I, can form a close-packed, up to ∼ 100 × 40 Å cylindrical assembly in class II, which can house about half of the 66 putative collagen-like sequence and the rest, tethered to the trimeric globular domains at the C terminus, are highly dynamic. As a result, the globular domains elaborate a variety of arrangements, covering an area of up to ∼ 4.9 × 10⁵ Ų and up to ∼ 320 Å apart, some of which were captured in reconstructions of class II. Our reconstructions suggest that the N-terminal structured domain, agreeing approximately with the expected volume for the octadecameric assembly of the terminal 27 amino acids, is crucial to the formation of the functionally active HMW. On the other hand, conformational flexibility of the trimers at the C terminus can allow the HMW to access and cluster disparate target ligands binding to the globular domains, which may be necessary to activate cellular signaling leading to the remarkable functional diversity of adiponectin.     

The Metalloregulatory Zinc Site in Streptococcus pneumoniae AdcR, a Zinc-activated MarR Family Repressor

Streptococcus pneumoniae D39 AdcR (adhesin competence repressor) is the first metal-sensing member of the MarR (multiple antibiotic resistance repressor) family to be characterized. Expression profiling with a ΔadcR strain grown in liquid culture (brain-heart infusion) under microaerobic conditions revealed upregulation of 13 genes, including adcR and adcCBA, encoding a high-affinity ABC uptake system for zinc, and genes encoding cell-surface zinc-binding pneumococcal histidine triad (Pht) proteins and AdcAII (Lmb, laminin binding). The ΔadcR, H108Q and H112Q adcR mutant allelic strains grown in 0.2 mM Zn(II) exhibit a slow-growth phenotype and an approximately twofold increase in cell-associated Zn(II). Apo- and Zn(II)-bound AdcR are homodimers in solution and binding to a 28-mer DNA containing an adc operator is strongly stimulated by Zn(II) with K_DNA-Zn = 2.4 × 10⁸ M^- 1 (pH 6.0, 0.2 M NaCl, 25 °C). AdcR binds two Zn(II) per dimer, with stepwise Zn(II) affinities K_Zn1 and K_Zn2 of ≥ 10⁹ M^- 1 at pH 6.0 and ≥ 10¹² M^- 1 at pH 8.0, and one to three lower affinity Zn(II) depending on the pH. X-ray absorption spectroscopy of the high-affinity site reveals a pentacoordinate N/O complex and no cysteine coordination, the latter finding corroborated by wild type-like functional properties of C30A AdcR. Alanine substitution of conserved residues His42 in the DNA-binding domain, and His108 and His112 in the C-terminal regulatory domain, abolish high-affinity Zn(II) binding and greatly reduce Zn(II)-activated binding to DNA. NMR studies reveal that these mutants adopt the same folded conformation as dimeric wild type apo-AdcR, but fail to conformationally switch upon Zn(II) binding. These studies implicate His42, His108 and H112 as metalloregulatory zinc ligands in S. pneumoniae AdcR.     

Structural characterization of intramolecular Hg(2+) transfer between flexibly linked domains of mercuric ion reductase

The enzyme mercuric ion reductase MerA is the central component of bacterial mercury resistance encoded by the mer operon. Many MerA proteins possess metallochaperone-like N-terminal domains (NmerA) that can transfer Hg²⁺ to the catalytic core domain (Core) for reduction to Hg⁰. These domains are tethered to the homodimeric Core by ∼ 30-residue linkers that are susceptible to proteolysis, the latter of which has prevented characterization of the interactions of NmerA and the Core in the full-length protein. Here, we report purification of homogeneous full-length MerA from the Tn21 mer operon using a fusion protein construct and combine small-angle X-ray scattering and small-angle neutron scattering with molecular dynamics simulation to characterize the structures of full-length wild-type and mutant MerA proteins that mimic the system before and during handoff of Hg²⁺ from NmerA to the Core. The radii of gyration, distance distribution functions, and Kratky plots derived from the small-angle X-ray scattering data are consistent with full-length MerA adopting elongated conformations as a result of flexibility in the linkers to the NmerA domains. The scattering profiles are best reproduced using an ensemble of linker conformations. This flexible attachment of NmerA may facilitate fast and efficient removal of Hg²⁺ from diverse protein substrates. Using a specific mutant of MerA allowed the formation of a metal-mediated interaction between NmerA and the Core and the determination of the position and relative orientation of NmerA to the Core during Hg²⁺ handoff.     

Enzyme-Complemented Activatorsorbent Assay (ECASA): Genetic Engineering for Enzyme-Linked Immunosorbent Assay-Type Mercuric Ion Detection

The sensor component of bacterial mercury resistance systems is the metalloregulatory protein MerR, which has nanomolar sensitivity and high selectivity for Hg(II). A fusion protein of MerR and the α-peptide part of β-galactosidase (LacZα) was constructed by fusing the relevant genes. The protein exhibited both MerR functions and α-complementing activity to the inactive LacZΔM15 (M15) protein. The bifunctional character of the appropriate MerR–LacZα-complemented M15 protein (MerR–LacZα:M15 protein complex) was used to develop a Hg(II)-specific enzyme-complemented activatorsorbent assay. Hg(II) was immobilized and presented on a matrix taking advantage of the high affinity of Hg(II) to SH residues. The immobilized Hg(II) could be specifically detected down to the parts-per-billion level by quantifying the β-galactosidase activity of the bound fusion protein complex.