Linkage of a RAPD marker with powdery mildew resistance <Emphasis Type="Italic">er-1</Emphasis> gene in <Emphasis Type="Italic">Pisum sativum</Emphasis> L.

The aim of this study was to investigate the inheritance of powdery mildew disease and to tag it with a DNA marker to utilize for the marker-assisted selection (MAS) breeding program. The powdery mildew resistant genotype Fallon ^er and susceptible genotype 11760-3 ^ER were selected from 177 genotypes by heavy infestation of germplasm with Erysiphe pisi through artificial inoculation The F₁ plants of the cross Fallon/11760-3 indicated the dominance of the susceptible allele, while F₂ plants segregated in 3: 1 ratio (susceptible: resistant) that fit for goodness of fitness by χ² (P > 0.07), indicating monogenic recessive inheritance for powdery mildew resistance in Pisum sativum. A novel RAPD marker OPB18 (5′-CCACAGCAGT-3′) was linked to the er-1 gene with 83% probability with a LOD score of 4.13, and was located at a distance of 11.2 cM from the er-1 gene.     

Development and validation of breeder-friendly KASPar markers for <Emphasis Type="Italic">er1</Emphasis>, a powdery mildew resistance gene in pea (<Emphasis Type="Italic">Pisum sativum</Emphasis> L.)

Powdery mildew of pea is caused by Erysiphe pisi DC and is a serious threat to pea (Pisum sativum L.) production throughout much of the world. Development and utilization of genetic resistance to powdery mildew is considered an effective and sustainable strategy to manage this disease. One gene, er1, conferring powdery mildew resistance, was previously cloned and sequenced, and the functional markers for each resistance allele were reported. Allele-specific DNA markers are efficient and powerful tools to facilitate crop improvement and new cultivar development in breeding programs. However, extensive application of these markers is limited by gel-associated obstacles. In this study, eight breeder-friendly kompetitive allele-specific PCR (KASPar) markers were developed to overcome the problems of gel-based markers and increase the efficiency of genotypic screening. In order to identify additional pea germplasm with powdery mildew resistance, these KASPar markers were deployed and used to genotype a pea collection derived from the USDA pea single-plant (PSP) collection. Simultaneously, a phenotypic screening and a genotypic validation using the corresponding gel-based functional markers were conducted on the PSP collection. One pea accession, PI 142775, was identified by both phenotyping and genotyping to carry the allele er1-1 for powdery mildew resistance, indicating that the KASPar assay is an efficient and robust tool for breeding for powdery mildew resistance.     

Interaction of a Blumeria graminis f. sp. hordei effector candidate with a barley ARF‐GAP suggests that host vesicle trafficking is a fungal pathogenicity target

Filamentous phytopathogens, such as fungi and oomycetes, secrete effector proteins to establish successful interactions with their plant hosts. In contrast with oomycetes, little is known about effector functions in true fungi. We used a bioinformatics pipeline to identify Blumeria effector candidates (BECs) from the obligate biotrophic barley powdery mildew pathogen, Blumeria graminis f. sp. hordei (Bgh). BEC1–BEC5 are expressed at different time points during barley infection. BEC1, BEC2 and BEC4 have orthologues in the Arabidopsis thaliana‐infecting powdery mildew fungus Golovinomyces orontii. Arabidopsis lines stably expressing the G. orontii BEC2 orthologue, GoEC2, are more susceptible to infection with the non‐adapted fungus Erysiphe pisi, suggesting that GoEC2 contributes to powdery mildew virulence. For BEC3 and BEC4, we identified thiopurine methyltransferase, a ubiquitin‐conjugating enzyme, and an ADP ribosylation factor‐GTPase‐activating protein (ARF‐GAP) as potential host targets. Arabidopsis knockout lines of the respective HvARF‐GAP orthologue (AtAGD5) allowed higher entry levels of E. pisi, but exhibited elevated resistance to the oomycete Hyaloperonospora arabidopsidis. We hypothesize that ARF‐GAP proteins are conserved targets of powdery and downy mildew effectors, and we speculate that BEC4 might interfere with defence‐associated host vesicle trafficking.     

Production and Dispersal of Conidia of Peronospora pisi on Pea Leaves

The number of crops of conidiophores and conidia of Peronospora pisi produced on a single lesion on leaflets of pea (Pisum sativum L.) was determined both in vitro and in vivo by artificial inoculation. Only two crops were produced in vitro whereas five crops were discerned under in vivo conditions. There was a marked difference in the size of conidiophores and conidia formed under the above two conditions. Temperature had a marked effect on the penetration of pea leaflets by conidial germ tubes of P. pisi. The pathogen penetrated the leaf tissues at 12-14°C in 8.0-8.5 h whereas more time (9.5-16.5 h) was required for penetration at higher temperatures (15-18°C). Use of systemic fungicides has been suggested to control downy mildew of pea because of its capacity to produce more than one crop of propagules on the same lesion. Maximum spore discharge in P. pisi was observed from 9.00 to 15.00 hours. However, presence of light, high temperature, lack of moisture on leaf surface and wind velocity affected spore discharge.     

Evidence for Resistance-inducing Compounds in Conidia of Erysiphe graminis f.sp. hordei

Preparations of Erysiphe graminis f.sp. hordei conidia were spray-applied to the first leaf of barley plants which were subsequently challenge inoculated with virulent powdery mildew. The powdery mildew reducing effect of the preparations was assessed by scoring the outcome of the challenge inoculation. Homogenates of ungerminated conidia, germinated conidia, and methanol-water extracts of germinated conidia reduced the number of powdery mildew colonies. Cell wall fragments from ungerminated conidia, germinated conidia, and conidial germination fluid obtained from conidia germinated in aqueous suspension did not reduce the number of powdery mildew colonies. Microsconical analysis of the infection course following challenge inoculation indicated that the powdery mildew reducing effect is due partly to induced resistance.     

Molecular mapping of pea powdery mildew resistance gene <Emphasis Type="Italic">er2</Emphasis> to pea linkage group III

Powdery mildew caused by Erysiphe pisi D.C. is one of the most serious diseases that inflict heavy losses to pea crop world-wide. Identification of resistance sources and their incorporation into susceptible cultivars remains the most effective method of controlling the disease. The present study investigated the resistance phenotype, inheritance, and genomic location of gene(s) controlling resistance to powdery mildew in pea genotype ‘JI2480’. The powdery mildew resistance in ‘JI2480’ appeared to be a spatial phenomenon showing expression only in leaf tissues. By segregation analysis of an F₂ progeny of cross ‘Lincoln/JI2480’, the leaf resistance of ‘JI2480’ was shown to be controlled by a single recessive gene, presumed to be er2. Through linkage analysis of 111 resistant F₂ progeny plants with simple sequence repeat (SSR) and random amplified polymorphic DNA (RAPD) markers adopted from the published linkage maps, the er2 gene was localized on pea linkage group III (LGIII). The assignment of er2 to LGIII, a position different from that reported for er1, has resolved the long standing controversy in the literature regarding the existence and genomic location of er2 gene. A RAPD marker OPX-17_1400, exhibiting cis phase linkage (2.6 cM) to er2 was successfully converted to a sequence characterized amplified region (SCAR) marker, ScX17_1400. The SCAR marker ScX17_1400 will ensure speedy and precise introgression of er2 into susceptible cultivars by permitting selection of er2 heterozygotes amongst BC _n F₁s without progeny tests and resistance screening.     

Influence of Phytohormones on Development of Conidial Inoculum of Causative Agents of the Phlox and Barley Powdery Mildew

We studied the role of phytohormones: zeatin, kinetin, and abscisic acid, in the regulation of development of the conidial inoculum of Erysiphe cichoracearumDC. f. phlogisJacz. and E. graminisDC. f. hordeiMarchal. When the pathogen conidia were in direct contact with phytohormones, the intensity of their germination significantly increased. In the presence of cytokinins, the amount of normal appressoria decreased and that of abnormal growth tubes increased. On the phlox leaves treated with cytokinins, the intensity of germination of the conidia increased, as compared to the control, while abscisic acid exerted the opposite effect. The treatment of barley leaves with cytokinins did not affect markedly the development of conidial inoculum, as compared to the control, while abscisic acid significantly decreased the intensity of germination of the conidia. On the leaves of different Phloxspecies, the degree of germination of the conidial negative correlated with their resistance against the powdery mildew. The role of cytokinins in pathogenesis of biotrophic fungi is discussed.     

Identification and validation of RAPD and SCAR markers linked to the gene <Emphasis Type="Italic">Er3</Emphasis> conferring resistance to <Emphasis Type="Italic">Erysiphe pisi</Emphasis> DC in pea

Three genes, er1, er2 and Er3, conferring resistance to powdery mildew (Erysiphe pisi) in pea have been described so far. Because single gene-controlled resistance tends to be overcome by evolution of pathogen virulence, accumulation of several resistance genes into a single cultivar should enhance the durability of the resistance. Molecular markers linked to genes controlling resistance to E. pisi may facilitate gene pyramiding in pea breeding programs. Molecular markers linked to er1 and er2 are available. In the present study, molecular markers linked to Er3 have been obtained. A segregating F₂ population derived from the cross between a breeding line carrying the Er3 gene, and the susceptible cultivar ‘Messire’ was developed and genotyped. Bulk Segregant Analysis (BSA) was used to identify Random Amplified Polymorphic DNA (RAPD) markers linked to Er3. Four RAPD markers linked in coupling phase (OPW04_637, OPC04_640, OPF14_1103, and OPAH06_539) and two in repulsion phase (OPAB01_874 and OPAG05_1240), were identified. Two of these, flanking Er3, were converted to Sequence Characterized Amplified Region (SCAR) markers. The SCAR marker SCW4₆₃₇ co-segregated with the resistant gene, allowing the detection of all the resistant individuals. The SCAR marker SCAB1₈₇₄, in repulsion phase with Er3, was located at 2.8 cM from the gene and, in combination with SCW4₆₃₇, was capable to distinguish homozygous resistant individuals from heterozygous with a high efficiency. In addition, the validation for polymorphism in different genetic backgrounds and advanced breeding material confirmed the utility of both markers in marker-assisted selection.     

Biochemical Investigations of Sclerotial Exudates of Sclerotium rolfsii and their Antifungal Activity

Exudates from sclerotia of two Sclerotium rolfsii isolates (one causing collar rot in Cicer arietinum, isolate VC971, and the other leaf spots in Rauvolfia serpentina, isolate VL016) were assayed for their antifungal activity against 26 fungi consisting of plant parasites as well as saprophytes. Spore germination of all the test fungi was affected by the exudates reaching 100% in some cases. Foliar spray with exudates of isolate VL016 significantly reduced disease incidence of balsam (Impatiens balsamina) powdery mildew caused by Erysiphe cichoracearum and pea (Pisum sativum) powdery mildew caused by Erysiphe pisi, under field conditions. Characterization of exudates from 25 isolates of S. rolfsii revealed pH ranging from 3.8 to 5.3 and colour from light yellow to deep yellow. Among the phenolic acids found in the exudates were tannic, gallic, caffeic, vanillic, ferulic, chlorogenic and cinnamic acids. Oxalic acid was also found in varied amounts. Among the phenolic acids, ferulic acid was found to be present at high concentration in exudates of most isolates (3.9–153.4 μg/ml). The antioxidant properties of phenolics, which generally inhibit fungal morphogenesis including spore germination along with the antifungal nature of some phenolics are chiefly attributed to the inhibitory effect of sclerotial exudates of S. rolfsii. Additionally, both the isolates VC971 and VL016 showed almost similar antifungal activities despite they are of different origin and thereby demonstrate the antifungal nature of sclerotial exudates.     

Pea powdery mildew <Emphasis Type="Italic">er1</Emphasis> resistance is associated to loss-of-function mutations at a <Emphasis Type="Italic">MLO</Emphasis> homologous locus

The powdery mildew disease affects several crop species and is also one of the major threats for pea (Pisum sativum L.) cultivation all over the world. The recessive gene er1, first described over 60 years ago, is well known in pea breeding, as it still maintains its efficiency as a powdery mildew resistance source. Genetic and phytopathological features of er1 resistance are similar to those of barley, Arabidopsis, and tomato mlo powdery mildew resistance, which is caused by the loss of function of specific members of the MLO gene family. Here, we describe the obtainment of a novel er1 resistant line by experimental mutagenesis with the alkylating agent diethyl sulfate. This line was found to carry a single nucleotide polymorphism in the PsMLO1 gene sequence, predicted to result in premature termination of translation and a non-functional protein. A cleaved amplified polymorphic sequence (CAPS) marker was developed on the mutation site and shown to be fully co-segregating with resistance in F₂ individuals. Sequencing of PsMLO1 from three powdery mildew resistant cultivars also revealed the presence of loss-of-function mutations. Taken together, results reported in this study strongly indicate the identity between er1 and mlo resistances and are expected to be of great breeding importance for the development of resistant cultivars via marker-assisted selection.     

Inheritance of powdery mildew (Erysiphe polygoni DC) resistance in mungbean (Vigna radiata L. Wilczek)

Detached mungbean (Vigna radiata L.Wilczek) leaves were inoculated with a conidial suspension of a local isolate (TI-1) of the powdery mildew pathogen (Erysiphe polygoni DC) under controlled environment conditions. Based on the latent period and severity of the infection, a rating scale of 0–5 was used to classify the host pathogen interactions. Reactions 0, 1 and 2 were considered resistant and referred to as R0, R1 and R2 while 3, 4 and 5 were classified as susceptible (S). RUM lines (resistant to powdery mildew) and their derivatives are crossed with several susceptible (reaction types 3–5) genotypes and the inheritance of the resistance was studied in the F₁, F₂ and F₃ generations. The results showed that powdery mildew resistance in mungbean is governed by two dominant genes designated as Pm-1 and Pm-2. When both Pm-1 and Pm-2 were present, an R0 reaction was observed after inoculation with TI-1. The resistant reaction was R1 when only Pm-1 was present and R2 in the presence of Pm-2. In the absence of both Pm-1 and Pm-2, susceptible reactions 3, 4 and 5 were observed.     

Conidia of the tomato powdery mildew <Emphasis Type="Italic">Oidium neolycopersici</Emphasis> initiate germ tubes at a predetermined site

The emergence of germ tubes from the conidia of powdery mildew fungi is the first morphological event of the infection process, preceding appressoria formation, peg penetration and primary haustoria formation. Germination patterns of the conidia are specific in powdery mildew fungi and therefore considered useful for identification. In the present study, we examined conidial germination of the tomato powdery mildew Oidium neolycopersici KTP-01 in order to clarify whether germ tube emergence site in KTP-01 conidia is determined by the first contact of the conidia to leaves (as found for the conidia of barley powdery mildew), or alternatively is predetermined and is unrelated to contact stimulus. Highly germinative conidia of KTP-01 were collected from conidial pseudochains on conidiophores in colonies on tomato leaves using two methods involving an electrostatic spore attractor and a blower. In the electrostatic spore attraction method, the conidia were attracted to the electrified insulator probe of the spore collector—this being the first contact stimulus for the conidia. In addition, the blowing method was used as a model of natural infection; pseudochain conidia were transferred to detached leaves by air (1 m/s) from a blower. Thus, landing on the leaves was the first contact for the conidia. Furthermore, conidia were also blown onto an artificial membrane (Parafilm-coated glass slides forming a hydrophobic surface) or solidified agar plates in Petri dishes (hydrophilic surface). Eventually, almost all conidia on the probe and on tomato leaves or artificial hydrophobic and hydrophilic surfaces synchronously germinated within 6 h of incubation, indicating that the first contact of the conidia with any of the aforementioned substrata was an effective germination induction signal. Germ tube emergence sites were exclusively subterminal on the conidia. Moreover, the germ tubes emerged without any relation to the sites touched first on the conidia. Thus, the present study strongly indicates that conidia of O. neolycopersici produce germ tubes at a predetermined site.     

Powdery Mildew on Mulberry in Yunnan,China is Distinct from Other Phyllactinia spp. on Morus

The occurrence of an epidemic outbreak of a powdery mildew disease on mulberry in Yunnan province, China, is reported. Its symptoms are characteristic for powdery mildews and visible as white pathches covering the abaxial surfaces of leaves leading to chlorosis and necrosis. The pathogen is morphologically barely distinguishable from Phyllactinia moricola. However, it exhibits several new morphological characteristics which 2–3 conidia could be formed in short chains at the apex of the conidiophores and the conidia could produce two germ tubes in any position. Phylogenetic analyses of ITS sequences show that the pathogen has a close genetic relationship with P. moricola and Ph. broussonetiae‐kaempferi, two species on hosts belonging to family Moraceae. However, the ITS differences between Japanese sequences and the Chinese sequence derived from mulberry are greater than expected for a single species and suggest a cryptic species in China, but the present data are not sufficient for a final conclusion. Therefore, the Morus powdery mildew in Yunnan can currently only be classified as Phyllactinia sp. Morphological features, including conidial germination pattern of this powdery mildew are described in detail, and the local climatic conditions of the disease are analysed, which will provide the base for finding an effective method, including bio‐control, to control the disease under local conditions.     

Targeted destruction of fungal structures of Erysiphe trifoliorum on flat leaf surfaces of Marchantia polymorpha

In this study, we observed the germination behaviour of airborne conidia from powdery mildews that settle on thalloid surfaces. We inoculated thalli (flat, sheet‐like leaf tissues) and gemmae (small, flat, sheet‐like leaf tissues that propagate asexually via bud‐like structures) of the common liverwort (Marchantia polymorpha) with conidia from tomato powdery mildew (Oidium neolycopersici; KTP‐02) and red clover powdery mildew (Erysiphe trifoliorum; KRCP‐4N) and examined their germination and subsequent appressorium formation under a high‐fidelity digital microscope. Conidial bodies and germ tubes of the inoculated KRCP‐4N conidia were destroyed on both the thalli and gemmae. The destruction of these fungal structures was observed only for KRCP‐4N conidia inoculated onto M. polymorpha on both leaf surfaces. No differences in destruction of the KRCP‐4N fungal structures between thalli and gemmae were observed. At 4 h post‐inoculation, destruction of the germ tube tip was observed when it reached the gemmae leaf surface. At 6 h post‐inoculation, the conidial bodies and germ tubes were destroyed. In contrast, KTP‐02 conidia were not destroyed and formed normal, well‐lobed appressoria on the surface of M. polymorpha gemmae.     

Water Stress-Induced Changes in the Morphology of the Powdery Mildew, Leveillula taurica (Lèv.) Arn.

Water stress in Capsiucm annuum L., induced by means of polyethylene glycol influenced the length and branching frequency of conidiophores and conidial dimensions of the powdery mildew, Leveillula taurica (Lèv.) Arn. Conidiophore branching frequency and length as well as conidial length and width decreased with decreasing relative water content. The availability of water to host plants seems to have a direct effect on the growth vigour and development of the powdery mildew possibly is suggested that water stress may be imposed on host plants by the dry harmattan season resulting in reduced growth vigour of the powdery mildew. Morphology of powdery mildew developing under low water potential may be altered.     

Restriction fragment length polymorphism analysis of loci associated with disease resistance genes and developmental traits in Pisum sativum L.

An F₂ population of pea (Pisum sativum L.) consisting of 174 plants was analysed by restriction fragment length polymorphism (RFLP) and random amplified polymorphic DNA (RAPD) techniques. Ascochyta pisi race C resistance, plant height, flowering earliness and number of nodes were measured in order to map the genes responsible for their variation. We have constructed a partial linkage map including 3 morphological character genes, 4 disease resistance genes, 56 RFLP loci, 4 microsatellite loci and 2 RAPD loci. Molecular markers linked to each resistance gene were found: Fusarium wilt (6 cM from Fw), powdery mildew (11 cM from er) and pea common Mosaic virus (15 cM from mo). QTLs (quantitative traits loci) for Ascochyta pisi race C resistance were mapped, with most of the variation explained by only three chromosomal regions. The QTL with the largest effect, on chromosome 4, was also mapped using a qualitative, Mendelian approach. Another QTL displayed a transgressive segregation, i.e. the parental line that was susceptible to Ascochyta blight had a resistance allele at this QTL. Analysis of correlations between developmental traits in terms of QTL effects and positions suggested a common genetic control of the number of nodes and earliness, and a loose relationship between these traits and height.     

Effects of Sunflower Oil on Tomato Powdery Mildew Caused by Oidium neolycopersici

When tomato leaves were sprayed with 0.1% emulsified canola oil, corn oil, grape seed oil, peanut oil, safflower oil, soya bean oil or sunflower oil, the severity of powdery mildew caused by Oidium neolycopersici was greatly reduced. Among these edible oils tested, sunflower oil was the most effective in the control of powdery mildew. When sprayed with 0.5% sunflower oil, powdery mildew on tomato leaves was reduced to a negligible level. Sunflower oil applied to halves of upper leaf surface did not induce resistance against the pathogen in the non‐treated halves. When applied to halves of lower leaf surface, it also failed to reduce the severity of powdery mildew on the upper leaf surface right above the treated area indicating that control of the powdery mildew by sunflower oil did not result from activation of host defence mechanisms. Scanning electron microscopy showed that control of powdery mildew with sunflower oil resulted mainly from the inhibition of conidial germination and suppression of mycelial growth of the pathogen.     

Detection and quantification of Erysiphe necator DNA in wine grapes and resultant must and juice

Powdery mildew of grapevines is difficult to assess visually at the weighbridge, particularly in large consignments of machine-harvested fruit. To facilitate accurate methods for the detection and quantification of the disease in grape samples obtained from both the vineyard and winery, we developed a DNA probe for the pathogen Erysiphe necator. The E. necator-specific 450 bp DNA fragment pEnA1, targets highly repetitive sequences and was isolated from a partial genomic library. In screening for species specificity, clone pEnA1 was used in slot-blot hybridization and detected E. necator DNA from grapes and resultant must and juice, but not from clarified juice and wine. The detection threshold was approximately 50 pg ofE. necator DNA per 100 ng total DNA of grape sample and was equivalent to 1–5 % of a grape bunch visually affected by powdery mildew. Disease severity, expressed as the percentage of surface area of a bunch with powdery mildew, and E. necator DNA content were highly correlated, r² = 0.955, P < 0.001. The DNA-based hybridization assay has the potential to predict the severity of powdery mildew in grape samples from the vineyard and in must and juice samples at the winery. The DNA sequence of clone pEnA1 was used to design species-specific primers, the results maintaining the same specificity patterns observed in the initial hybridization assays. The PCR-based assay was sensitive enough to detect approximately 1 pg DNA, being equivalent to 1 conidium per sample. This is the first report to date of the detection of all known phenetic groups of E. necator DNA and of the quantification of DNA from grape samples at the winery. Accurate information on the extent of powdery mildew contamination of grape lots would enable wineries to make more informed decisions about the use of fruit and must.     

新番茄粉孢菌Oidium neolycopersici生物学特性的研究

新番茄粉孢菌Oidium neolycopersici是近几年引起番茄白粉病的主要病原菌。在国内首次对该菌的生物学特性进行了研究。结果表明：新番茄粉孢菌分生孢子萌发的适宜温度范围为20－25℃,最适相对湿度范围为80%－100%,在水滴中不能萌发;该菌对光照条件和酸碱度的要求不严格,在pH3－12时其萌发率均能达到90%以上;在碳氮源利用方面,该菌分生孢子对各种碳源均能利用,以甘露糖和半乳糖效果最好;氮源以硝态氮（硝酸钾）为佳,铵态氮、有机态氮对其萌发有抑制作用;分生孢子萌发的致死温度为44℃ 10min。