Futile attempts to differentiate provide molecular evidence for individual differences within a population of cells during cellular reprogramming

A cryptic plasmid from Arthrobacter rhombi PRH1, designated as pPRH, was sequenced and characterized. It was 5000 bp in length with a G+C content of 66 mol%. The plasmid pPRH was predicted to encode six putative open reading frames (ORFs), in which ORF2 and ORF3 formed the minimal replicon of plasmid pPRH and shared 55-61% and 60-69% homology, respectively, with the RepA and RepB proteins of reported rhodococcal plasmids. Sequence analysis revealed a typical ColE2-type ori located 45 bp upstream of the gene repA. Sequence and phylogenetic analysis led to the conclusion that pPRH is a representative of a novel group of pAL5000 subfamily of ColE2 family plasmids. Three shuttle vectors pRMU824, pRMU824Km and pRMU824Tc, encoding chloramphenicol resistance, were constructed. The latter two harboured additional antibiotic resistance genes kan and tet, respectively. All vectors successfully replicated in Escherichia coli, Arthrobacter and Rhodococcus spp. The vector pRMU824Km was employed for functional screening of 2-hydroxypyridine catabolism encoding genes from Arthrobacter sp. PY22. Sequence analysis of the cloned 6-kb DNA fragment revealed eight putative ORFs, among which hpyB gene encoded a putative monooxygenase.     

Functional analysis of pAL5000, a plasmid from Mycobacterium fortuitum: construction of a "mini" mycobacterium-Escherichia coli shuttle vector

Functional domains of pAL5000 were determined by gene disruption and deletion analysis. Of the five plasmid open reading frames (ORFs), ORF1 to ORF5, and a putative origin of replication previously identified (J. Rauzier, J. Moniz-Pereira, and B. Gicquel-Sanzey, Gene 71:315-321), two of the ORFs (ORF3 and ORF4) were deemed dispensable for plasmid replication. A "mini" mycobacterium-Escherichia coli shuttle plasmid applicable for general recombinant DNA studies in mycobacteria was constructed by using the gene for Kanr (Tn903) as a selective marker. Heterologous expression of the gene for Kanr was confirmed by Western blotting (immunoblotting) analysis.     

Transposition-induced structural instability of Escherichia coli-mycobacteria shuttle vectors

Escherichia coli-mycobacteria shuttle vectors, derived from pAL5000 (a mycobacterial plasmid) and pUC19, were frequently found to undergo structural alterations due to transposition of IS1096, a Mycobacterium smegmatis transposable element, at a cluster of sites located within a small region of 60 bp, immediately upstream of a kanamycin resistance gene present in these vectors. The structural alterations led to deletion of large regions of the vector which, in several cases, were found to extend into the ORF2 (RepB) coding sequences of the pAL5000 replication region without affecting its replication capability. This suggests that the entire ORF2 coding sequences of the pAL5000 replication region may not be essential for replication of pAL5000-derived vectors. The deletion derivatives, which contain the minimal sequences required for replication and selection in mycobacteria, were found to be structurally stable and therefore these could be potentially used as stable vector systems for the transformation of mycobacteria.     

Functional analysis of pAL5000 plasmid in Mycobacterium fortuitum.

Four of the five open reading frames (ORFs) present in Myobacterium fortuitum pAL5000 plasmid (ORF1, ORF3, ORF4, and ORF5) are dispensable for replication in M. fortuitum. However, two additional ORFs (ORF1 and ORF5) were necessary for replication in a Myobacterium smegmatis heterologous host containing an efficient plasmid transformation mutation.     

Molecular characterization of a DNA fragment carrying the basic replicon of pTUC100, the natural plasmid encoding the peptide antibiotic microcin J25 system

The Escherichia coli plasmid pTUC100 encodes production of, and immunity to, the peptide antibiotic microcin J25. In the present study, an approximately 8-kb fragment immediately adjacent to the previously sequenced microcin region was isolated and its DNA sequence was determined. The main features of the newly characterized region are: (i) a basic replicon which is almost identical to that of the RepFIIA plasmid R100; (ii) two ORFs with 96% identity to two ORFs of unknown function on pO157, a large plasmid harbored by enterohemorragic E. coli, and a large ORF which does not show significant homology to any other reported nucleotide or protein sequence; and (iii) two intact insertion sequences, IS1294 and IS1. Sequence analysis, as well as that of the G+C content of both the 8-kb fragment and the previously sequenced microcin locus, lead us to propose that plasmid pTUC100 is a composite structure assembled from DNA elements from various sources.     

Analysis of the 7.6-kb cryptic plasmid pNC500 from <Emphasis Type="Italic">Rhodococcus rhodochrous</Emphasis> B-276 and construction of <Emphasis Type="Italic">Rhodococcus</Emphasis>–<Emphasis Type="Italic">E. coli</Emphasis> shuttle vector

Four circular cryptic plasmids were detected from propene-degrading Rhodococcus rhodochrous (formerly Nocardia corallina) B-276 and the smallest 7.6-kb plasmid, named pNC500 was used to construct Rhodococcus–E. coli shuttle vector, pNC5403. Sequence analysis of pNC500 revealed that the plasmid contains eight potential ORFs, namely 1 through 8. The deduced amino acid sequences for ORFs 3, 4, 6, and 7 show homology with those of Rep A, Rep B, DNA methyl-transferase (M.XamI), and restriction nuclease (R.XamI), respectively. The region responsible for replication in the potent oil-desulfurization bacterium, Rhodococcus opacus T09 was determined as 3.7 kb-XbaI/BalI fragment which contains ORFs 3 and 4, while no transformants were obtained when ORF 4 was partially deleted, suggesting that both are required for its replication. Alignment of the predicted amino acid sequences revealed that ORFs 3 and 4 were DNA binding protein and DNA primase, respectively. A compatibility test with pAL5000-related plasmid vector, pRHK1, which contains pRC4, revealed that pNC5403 was compatible with pRHK1 suggesting that each replication origin would be different. ORFs 3 and 4 containing a pNC5403 derivative, pN5DXB, was stably maintained for over 80 generations in the absence of antibiotic selective conditions.     

A stable Escherichia coli-mycobacteria shuttle vector 'pSO246' in Mycobacterium bovis BCG

Abstract The most widely used plasmid vector system in mycobacteria is based on pAL5000 from Mycobacterium fortuitum . The derivatives of the pAL5000-based shuttle vectors between Escherichia coli and mycobacteria, which we have utilized to secrete recombinant antigens, were generated. The stability of the vectors was assessed in Mycobacterium bovis BCG (BCG). The plasmid vector pSO246 was stable in BCG for at least 50 generations.     

Identification and sequence analysis of the replication region of the phage resistance plasmid pCI528 from Lactococcus lactis subsp. cremoris UC503

Abstract The replication region of the phage resistance plasmid pCI528 from Lactococcus lactis subsp. cremoris UC503 was localised to within a 10-kb Hin dIII restriction fragment. A 6.3-kb Bgl II- Hin dIII subclone of this fragment, cloned into a replication probe vector, allowed replication in Lactococcus but not in Bacillus or Lactobacillus . Sequence analysis revealed an ORF of 1152 bp preceded by a putative ori region containing a 22-bp sequence tandemly repeated three and three-quarter times, a second smaller direct repeat and two inverted repeats. Extensive homology was observed with the well characterised replication region of the small cryptic plasmid pCI305 (Hayes, F., Vos, P., Fitzgerald, G.F., de Vos, W. and Daly, C. Plasmid 25, 16–26).     

Analysis of the DNA sequence, gene expression, origin of replication and modular structure of the Lactococcus lactis lytic bacteriophage sk1

Bacteriophage sk1 is a small isometric-headed lytic phage belonging to the 936 species. It infects Lactococcus lactis , a commonly used dairy starter organism. Nucleotide sequence data analysis indicated that the sk1 genome is 28 451 nucleotides long and contains 54 open reading frames (ORFs) of 30 or more codons, interspersed with three large intergenic regions. The nucleotide sequence of several of the sk1 ORFs demonstrated significant levels of identity to genes (many encoding proteins of unknown function) in other lactococcal phages of both small isometric-headed and prolate-headed morphotype. Based on this identity and predicted peptide structures, sk1 genes for the terminase, major structural protein and DNA polymerase have been putatively identified. Genes encoding holin and lysin were also identified, subcloned into an Escherichia coli expression vector, and their function demonstrated in vivo . The sk1 origin of replication was located by identifying sk1 DNA fragments able to support the maintenance in L. lactis of a plasmid lacking a functional Gram-positive ori . The minimal fragment conferring replication origin function contained a number of direct repeats and 179 codons of ORF47. Although no similarity between phage sk1 and coliphage λ at the nucleotide or amino acid sequence level was observed, an alignment of the sk1 late region ORFs with the λ structural and packaging genes revealed a striking correspondence in both ORF length and isoelectric point of the ORF product. It is proposed that this correspondence is indicative of a strong conservation in gene order within these otherwise unrelated isometric-headed phages that can be used to predict the functions of the sk1 gene products.     

Identification and characterization of an active plasmid partition mechanism for the novel Lactococcus lactis plasmid pCI2000

The replication region of the lactococcal plasmid pCI2000 was subcloned and analyzed. The nucleotide sequence of one 5.6-kb EcoRI fragment which was capable of supporting replication when cloned on a replication probe vector revealed the presence of seven putative open reading frames (ORFs). One ORF exhibited significant homology to several replication proteins from plasmids considered to replicate via a theta mode. Deletion analysis showed that this ORF, designated repA, is indeed required for replication. The results also suggest that the origin of replication is located outside repA. Upstream and divergently transcribed from repA, an ORF that showed significant (48 to 64%) homology to a number of proteins that are required for faithful segregation of chromosomal or plasmid DNA of gram-negative bacteria was identified. Gene interruption and transcomplementation experiments showed that this ORF, designated parA, is required for stable inheritance of pCI2000 and is active in trans. This is the first example of such a partitioning mechanism for plasmids in gram-positive bacteria.     

Sequence analysis of the plasmid pColG from the Escherichia coli strain CA46

The complete 4715 nucleotide sequence of the plasmid pColG from the Escherichia coli strain CA46, which was originally assumed to code for colicin G activity, has been determined. Based on the nucleotide sequence homology of the 1828bp replication region, with an average G+C content of 48%, pColG was classified as a ColE1-like plasmid. Computer assisted analysis of the remaining 2887bp nucleotide sequence with an average G+C content of 34% revealed three putative OFRs. To find out whether one or all of the three ORFs code for a possible bacteriocin, a DNA fragment encompassing these ORFs has been cloned and the recombinant colonies tested for bacteriocin production. None of the colonies had an inhibitory activity against E. coli strains DH5, HB101 and MC4100. The assumption that the plasmid pColG from the E. coli strain CA46 codes for a bacteriocin thus could not be confirmed.     

Cloning and sequencing of plasmid pLC494 isolated from human intestinal Lactobacillus casei: construction of an Escherichia coli-Lactobacillus shuttle vector

The complete nucleotide sequence of plasmid pLC494 isolated from Lactobacillus casei L-49 was determined. Plasmid pLC494 is an 8846-bp long circular molecule with a G+C content of 41.5%. Two putative open reading frames, ORF4 (282 amino acids) and ORF5 (169 amino acids), were identified as replication proteins A and B that revealed 100 and 99% similarity, respectively, with the replication proteins of plasmid pLA103 from Lactobacillus acidophilus TK8912. Upstream of ORF4 were the four repeat regions (three perfect 22-bp repeats and one imperfect motif), a putative ribosome binding site, a -10 region, and a -35 region. The shuttle vector pJLE4942 (5318 bp) was constructed using repA from pLC494, a multiple cloning site, ColE1 ori, the ori of gram-negative bacteria from vector pUC19, and the chloramphenicol resistance gene from pJIR418 as a selection marker. Transformation of several lactic acid bacteria with the vector pJLE4942 indicated that this vector might be useful as a genetic tool for the intestinal lactobacilli.     

Characterization of a novel plasmid from extremely halophilic Archaea: nucleotide sequence and function analysis

We determined the complete nucleotide sequence of the 16341 bp plasmid pHH205 of the extremely halophilic archaeon Halobacterium salinarum J7. The plasmid has a G+C content of 61.1%. A number of direct and inverted repeat sequences were found in pHH205, while no insertion sequences were found. Thirty-eight large open reading frames (ORFs) were identified in both strands, and most of them had no significant similarities to known proteins. A putative protein encoded by ORF31 showed 20-41% homology to some hypothetical proteins, which are annotated in several archaeal genome databases as predicted nucleic acid-binding proteins containing PIN domain. Sequence analysis using the GC skew procedure predicted a possible origin of replication. A 4.8 kb PvuII-SnaBI fragment containing both this region and ORF31 was shown to be able to restore replicate of pWL102, a replicon-deficient plasmid in Haloferax volcanii and in H. salinarum R1. Several methods failed to completely cure H. salinarum J7 of pHH205, suggesting that the plasmid probably played an important role in the growth and metabolism of the host. Our work describes a novel haloarchaeal replicon, which may be useful in the construction of cloning and shuttle vectors.     

Sequence and analysis of pBM02, a novel RCR cryptic plasmid from Lactococcus lactis subsp cremoris P8-2-47

This paper reports the complete nucleotide sequence of the 3.85 kbp plasmid pBM02 from Lactococcus lactis subsp. cremoris P8-2-47. Analysis of the sequence predicted six ORFs larger than 25 amino acids. They all were transcribed from the same strand and organized in two functional cassettes: the replication region and a putative mobilization region. In the replication region, two ORFs specifying proteins homologous to others found in some classes of rolling circle-replicating plasmids were encountered (copG and repB). In fact, single-stranded DNA was detected as a replication intermediate of pBM02. copG and repB, together with some upstream sequences, formed part of the minimal replication unit of the plasmid. Interestingly, pBM02 shared a 212 bp stretch with plasmids of the pWV01 type, in which the whole single-strand origin of replication is included. In the mobilization region, an ORF coding for a mobilization-like protein was present, preceded by a putative oriT sequence homologous to that of plasmid pMV158. The replicon of pBM02 is of the wide-host range type, and functions in both Gram-positive and Gram-negative bacteria, including Lactobacillus casei, Lactobacillus plantarum, Bacillus subtilis, and Escherichia coli.     

The replication origin of pSC101: the nucleotide sequence and replication functions of the ori region

The nucleotide sequence of a 770-bp ori region of plasmid pSC101 is presented. The sequence shows homologies to some parts of Escherichia coli oriC and phage G4 ori. Several other features are an 80-bp A + T-rich region overlapping a part of the region homologous to oriC, three direct repeats of an 18-bp sequence adjacent to the A + T-rich region, a typical promoter sequence just upstream of the longest open reading frame (ORF) and a long inverted repeat sequence overlapping the putative promoter region. Analysis of successive deletions by BAL31 exonuclease demonstrated that one of the regions homologous to oriC along with the A + T-rich region are essential for autonomous replication of the plasmid. The three 18-bp repeats are responsible for incompatibility phenotype. The region containing the promoter-like sequence is required for expression of a trans-acting function.     

Complete nucleotide sequence of pAL5000, a plasmid from Mycobacterium fortuitum

We have determined the complete nucleotide sequence of pAL5000, a plasmid from Mycobacterium fortuitum; the plasmid contains 4837 bp with 65% G + C. Five open reading frames (ORF1 to ORF5) have been identified. A number of sequences corresponding to palindromes, repeats, a helix-turn-helix motif, a signal sequence and repetitive amino acid motifs can be identified. This sequence should facilitate the construction of vectors based on pAL5000 for transfer and expression studies in mycobacteria.     

Sequence analysis of a cryptic plasmid pCJ419 from Campylobacter jejuni and construction of an Escherichia coli-Campylobacter shuttle vector

A small cryptic plasmid, pCJ419, was identified in a human clinical isolate of Campylobacter jejuni, cloned and sequenced. pCJ419 is a circular molecule of 4013 bp with a G+C content of 27.1%. The products of four open reading frames (ORFs) share significant sequence similarity with putative proteins from known C. jejuni and Campylobacter coli plasmids. ORF-1 encodes a putative mobilisation protein (Mob). ORF-2 and ORF-3 encode proteins that have high identity to putative RepA and RepB proteins, respectively, of known C. jejuni and C. coli plasmids. ORF-4 encodes a protein that has high identity to a hypothetical protein of unknown function, Cjp32, previously described in a pVir plasmid of C. jejuni. Tandem repeating 22-bp sequences typical of a plasmid replication origin (ori) were identified upstream of the DNA sequences encoding putative replication initiation proteins. An Escherichia coli-Campylobacter shuttle cloning vector, pGU0202, was constructed using plasmid pMW2 that harbours a Campylobacter-derived kanamycin resistance gene [aph(3')-III]. The sequences encoding pCJ419 mob, RepA and RepB proteins were inserted upstream of aph(3')-III resulting in a stable construct of 6174 bp that was used to transform both E. coli and Campylobacter.     

The nucleotide sequence of the replication origin beta of the plasmid R6K

We h ave identified by molecular cloning a region of 283 base pairs of the HindIII 2 fragment of R6K which corresponds to the region of the replication origin beta. This 283 base-pair DNA fragment, when present contiguously with the structural gene for the replication initiation protein of R6K, encoded in the HindIII 9-15 and part of HindIII 2 restriction fragments, will support the replication of a plasmid chimera containing the pBR322 replicon in a pol Ats host at the nonpermissive temperature. The nucleotide sequence of the region of replication origin beta has been determined. The nucleotide sequence has some homology with the ori gamma region of R6K; it has a 15-base-pair homology with the replication origin of Escherichia coli.