The origin of transfer (oriT) of the conjugative plasmid R46: characterization by deletion analysis and DNA sequencing

Summary The origin of transfer (oriT) is the sequence within which conjugal transfer of plasmid DNA is initiated, and is absolutely required in cis for plasmid mobilization. We have cloned oriT from the 52 kb IncN plasmid R46 on a 600 bp fragment, and mapped the limits of the relevant sequence by deletion analysis and transposon mutagenesis. The nucleotide sequence of the oriT region contains 13 direct repeats of an 11 bp consensus sequence, 3 different pairs of 10 bp inverted repeats, and a segment that is extremely A-T rich. The direct repeats are within a region required for high frequency transfer and their sequence is such that their periodic alignment along the helix may induce curvature of the DNA. Analysis of Tn1725 insertions within the sequenced fragment of R46 revealed that, unlike most other transposons, transposition of Tn1725 can cause target sequence duplications of three different sizes.     

Nucleotide sequence and functional properties of DNA encoding incompatibility in the broad host-range plasmid R1162

Summary A 370 base pair (bp) fragment of R1162 DNA encoding the incompatibility determinant has been cloned and sequenced. The DNA is located between 6.1 and 6.5 on the R1162 map, near the origin of replication. The sequence contains three perfectly conserved 20 bp direct repeats, with 11 bp of this sequence repeated a fourth time. The direct repeat unit shows some homology with that of another, unrelated broad host-range plasmid, RK2. The cloned DNA has two other properties: it lowers the copy number of R1162 when cloned into this plasmid, and it is required in cis for replication of R1162 satellite plasmids.     

Control of replication of the broad host range plasmid RSF1010: The incompatibility determinant consists of directly repeated DNA sequences

Summary A 500 bp DNA fragment located in the vicinity of the origin of replication of plasmid RSF1010 was cloned into the plasmid vector pBR322 and shown to exhibit incompatibility against parental RSF1010. The rightmost region of this fragment contains three perfect 20 pb direct repeats and a fourth half-repeat of 11 bp, as shown by DNA sequencing. Delection of the four repeats from the cloned fragment resulted in complete loss of incompatibility whereas partial deletion of the repeated sequence resulted in a concurrent decrease in the expression of incompatibility. We conclude that the incompatibility determinant of RSF1010 is defined by the four repeats and also that the incompatibility expressed is not very strong, since the presence of about 1.5 times as many copies of the repeated sequence as are normally in a cell does not cause a total switch off of RSF1010 replication, but only a 40% reduction in the rate of replication.Abbreviations kb kilobase pairs - bp base pairs - Km^r, Tc^r resistance to kanamycin and tetracycline, respectively     

Novel post-replicative DNA modification in Streptomyces: analysis of the preferred modification site of plasmid pIJ101.

Both Streptomyces lividans and Streptomyces avermitilis have the ability to site specifically modify their DNA, rendering it susceptible to in vitro Tris-dependent double-strand cleavage. We have cloned a 160 bp fragment containing the preferred modification site of plasmid pIJ101 and, employing an in vitro primer extension assay, determined that the modifications occur at guanine residues on either strand separated by 3 bp. These guanines are located within a 6 bp palindromic 'core' sequence. A cloned copy of a 35 bp region of the plasmid containing this core sequence was not recognized by the modifying activity in vivo. To further investigate the nature of the site specificity a set of deletion mutants of the 160 bp sequence were analysed. This revealed that a substantial portion of this sequence is essential for authentic modification. The essential region contains three 13 bp direct repeats, the central one containing the core sequence, while the left-hand and right-hand copies overlap two potential stem-loop structures. Deletion of either left- or right-hand repeat structures abolishes modification within the core sequence, although the left-hand deletion resulted in modification at a secondary site within the right-hand direct repeat. These data support a post-replicative mechanism of modification, underlined by the observation that the modifications are not detected in single-stranded plasmid replication intermediates.     

Site-specific deletion at the replication origin of the antibiotic resistance factor R1

Summary The recombinant plasmid pRK101 carrying the complete replication origin of the antibiotic resistance factor R1 suffers frequently a deletion of 218 base pairs, removing parts or all of the origin sequence. This deletion seems to occur always when the Pst-E fragment carrying the replication origin is inserted into the cloning vector pBR322 in an orientation where the direction of R1 replication is the same as that of the vector plasmid and frequently when it is inserted in the opposite direction. DNA sequence analysis around the junction site generated by the deletion in three independently isolated deletion mutants reveals that the deletion occurs at a specific site, namely the end of a 22 bp sequence which is repeated almost identically at the other end of a segment of 197 bp. During the deletion one repeat unit is removed whereas the other is retained. The DNA sequence included by the two repeats contains high symmetric structures, i.e. inverted repeats, direct repeats and palindromes which may represent regulatory sites of the origin.     

Cloning and sequence analysis of linear plasmid telomeres of the bacterium Borrelia burgdorferi

Borrelia burgdorferi, the Lyme disease agent, has double-stranded linear plasmids with covalently closed ends. DNA at the ends, or telomeres, of two linear plasmids of B. burgdorferi strain B31 was examined. Telomeric sequences from both ends of a 16 kb linear plasmid and from one end of a 49 kb linear plasmid were cloned and sequenced. An 18 bp AT-rich inverted repeat was found at each end of the 16 kb linear plasmid. The sequences of the two ends of this plasmid were different beyond these short inverted terminal repeats. The cloned end of the 49 kb linear plasmid had sequence identity with one end of the 16 kb linear plasmid. The end sequence common to both plasmids contained a series of phased, short direct repeats and a 52 bp palindrome adjacent to a highly AT-rich region. These findings indicate that Borrelia linear plasmid telomeres have structural features different from those of other known replicons.     

The nucleotide sequence for the replication region of pVS40, a lactococcal food grade cloning vector

The replication region of a limited host range lactococcal vector, pVS40, was located within a 2359 bp Eco RI- Cla I fragment. Within this fragment a sequence for a 1197 bp reading frame coding for a 46 826 Da protein together with a putative ribosomal binding site and the -10 and -35 promoter regions could be detected. Immediately upstream from the promoter were three complete and one nearly complete successive direct repeats (TATAGCGTATGAAAAAACTGTG), suggesting an origin of replication. The protein has considerable homologies to certain lactococcal plasmid replication proteins.     

Nucleotide sequence of the region of the origin of replication of the broad host range plasmid RK2

Summary A DNA sequence cosisting of 617 base pairs (bp) from the region of the origin of replication of the broad-host range plasmid RK2 has been determined. Included within this sequence is a 393 bp HpaII restriction fragment that provides a functional origin or replication when other essential RK2 specified functions are provided in trans. Also contained in this sequence is a region, distinguished functionally from the replication origin, which is involved in the expression of inc ₂ incompatibility, i.e., the ability of derivatives of RK2 to eliminate a resident RK2 plasmid. The 617 bp sequence includes eight 17 base pair direct repeats with 5 located within the region required for a functional replication origin and 3 within the region involved in inc ₂ incompatibility. In addition, a 40 bp region rich in A-T followed by a 60 bp stretch having a high G+C content is present. Deletion evidence indicates that the A-T rich and possibly the G+C regions are required for a functional replication origin. Based on the evidence contained in this and the preceding paper (Thomas et al. 1980 b) a model will be presented for the involvement of these specific sequences in the initiation of RK2 DNA replication, plasmid maintenance and plasmid incompatibility.     

DNA from the A6S/2 crown gall tumor contains scrambled Ti-plasmid sequences near its junctions with plant DNA

The A6S/2 tumor incited on tobacco by Agrobacterium tumefaciens harboring the octopine-type A6 Ti plasmid contains one insert of Ti-plasmid sequences (the T DNA). This 13 kb insert is derived from a colinear sequence in the Ti plasmid (the T region) and becomes attached to plant DNA in the nucleus of the host cell. We have determined the DNA sequence encompassing the left end of the T region of the A6 Ti plasmid and the corresponding portion of the A6S/2 T DNA. The two sequences are identical for at least 806 bp. To the left of the divergence point, the tumor contains five partially overlapping sequences that are direct or inverted repeats of sequences to the right of the divergence point. The Ti plasmid contains only the right member of each of these repeats. We have also performed heteroduplex studies that indicate that this T DNA has a 520 bp inverted repeat of an internal sequence at the right end near its junction with plant DNA. The repeated sequences near the ends of the T DNA resemble the repeats of adenovirus type 12 sequences found near its junction with host DNA. We discuss data suggesting that the 23 bp to the immediate right of the divergence point of the A6 left junction form a site important in some step in the transfer of T-region DNA from the bacteria to the plant.     

Preferential uptake of restriction fragments from a gonococcal cryptic plasmid by competent Neisseria gonorrhoeae

Factors involved in the specificity of DNA uptake by competent Neisseria gonorrhoeae were examined. Host-controlled modification did not affect uptake. Certain restriction fragments of the 4.2 kb gonococcal cryptic plasmid pFA1 and of the replicative form of the bacteriophage M13 were taken up in preference to others, independent of differences in fragment size. A 600 bp fragment from the 4.2 kb plasmid was cloned into pLES2, a gonococcal-Escherichia coli shuttle vector; the 600 bp fragment was taken up into a DNAase-I-resistant state in preference to the vector fragment. A second 370 bp fragment in pFA1 was also taken up preferentially. The 600 bp and 370 bp fragments share a 10 bp sequence, which is found in pFA1 only on fragments that were taken up readily. However, a fragment from M13 which was efficiently taken up did not contain this 10 bp sequence. In addition, this sequence was not sufficient to direct preferential DNA uptake by gonococci, since a recombinant plasmid containing this 10 bp sequence was not taken up appreciably better than the vector plasmid or another recombinant plasmid containing an unrelated 10 bp sequence. Sequence comparisons of the three restriction fragments which were preferentially taken up did not yield any consensus sequences greater than 7 bp. Although it is likely that efficient uptake of DNA by gonococci is determined by DNA structure, a single short sequence could not be found that accounted for specific uptake.     

Direct repeats of the F plasmid incC region express F incompatibility

The nucleotide sequence of the incompatibility region incC, located at 45.8--46.4 kb on the F plasmid map, was determined. This region consists of 543 bp and contains sufficient information to code for only two small polypeptides of 34 and 30 amino acids each. Deletion of the ATG start codons for these two polypeptides has no effect on expression of incC incompatibility. A prominent feature of this sequence is the presence of five 22 bp direct repeats. A 58 bp segment of the incC region that contains two of these direct repeats was inserted into plasmid pACYC184, which is compatible with the F plasmid. The pACYC184 plasmid containing the direct-repeat sequences now expresses incompatibility with the F'lac plasmid and replication-proficient derivatives of the mini-F plasmid.     

Identification and sequence analysis of the replication region of the phage resistance plasmid pCI528 from Lactococcus lactis subsp. cremoris UC503

Abstract The replication region of the phage resistance plasmid pCI528 from Lactococcus lactis subsp. cremoris UC503 was localised to within a 10-kb Hin dIII restriction fragment. A 6.3-kb Bgl II- Hin dIII subclone of this fragment, cloned into a replication probe vector, allowed replication in Lactococcus but not in Bacillus or Lactobacillus . Sequence analysis revealed an ORF of 1152 bp preceded by a putative ori region containing a 22-bp sequence tandemly repeated three and three-quarter times, a second smaller direct repeat and two inverted repeats. Extensive homology was observed with the well characterised replication region of the small cryptic plasmid pCI305 (Hayes, F., Vos, P., Fitzgerald, G.F., de Vos, W. and Daly, C. Plasmid 25, 16–26).     

Sequence analysis of the family of penicillinase-producing plasmids of Neisseria gonorrhoeae

The exact nature of the sequence differences between the medically important family of gonococcal penicillinase-producing plasmids has been ascertained. The entire DNA sequence of the Asia-type plasmid, pJD4, demonstrated that it is 7426 bp and contains two direct repeats (DR30) that are implicated in the formation of deletion variant plasmids, such as the Africa-type plasmid. We have identified putative DnaA and IHF binding sites, various open reading frames that are thought to specify functional proteins, and some important DNA sequences involved with conjugative transfer of gonococcal beta-lactamase plasmids. The deletion in the Africa-type plasmid is 1827 bp and one of the DR30 repeats is also missing. The deletion in the Rio-type plasmid and several Toronto-type plasmids was determined to be 2273 bp and the sequence spanning the deletion was identical irrespective of geographic or temporal origin. The &Ncirc;imes-type plasmid is an Africa-type plasmid and also contains an IS5 insertion sequence. Since IS5 has not been identified in gonococcal isolates, we suggest that this sequence may have been inserted after the original gonococcal plasmid was transformed into Escherichia coli. The New Zealand plasmid is an Asia-type plasmid that contains an endogenous tandem duplication of 1883 bp and the direct DR2 is implicated in this duplication. The nature of the defined truncation of Tn2 present in the various plasmids is also discussed.     

Nucleotide sequence definition of a major human repeated DNA, the Hind III 1.9 kb family

A human Hind III 1.9 kb repeated DNA fragment was isolated and cloned in pBR322. A cloned member that hybridized predominantly to the 1.9 kb Hind III band in a digest of whole human DNA was chosen for sequencing. It is an 1894 bp fragment that shows no significant internal repeats. Few pCG residues are observed in the sequence and there are numerous stop codons. Detailed sequence comparisons confirm this is a novel class of repeats that is not related to previously characterized human satellite DNAs or Alu sequences. At least a portion of the sequence described is conserved in evolution.     

The oriT region of the conjugative transfer system of plasmid pCU1 and specificity between it and the mob region of other N tra plasmids.

The oriT region of the conjugative IncN plasmid pCU1 has been localized to a 669-bp sequence extending from pCU1 coordinates 8.48 to 9.15 kb. The nucleotide sequence of this region was determined. The region is AT-rich (69% AT residues), with one 19-bp and one 81-bp sequence containing 79% or more AT residues. Prominent sequence features include one set of thirteen 11-bp direct repeats, a second set of two 14-bp direct repeats, six different inverted repeat sequences ranging from 6 to 10 bp in size, and two sequences showing 12 of 13 nucleotides identical to the consensus integration host factor binding sequence. Specificity between this oriT and mobilization (mob) functions encoded by the N tra system was demonstrated. This specificity is encoded by the region lying clockwise of the BglII site at coordinate 3.3 on the pCU1 map. Two N tra plasmids isolated in the preantibiotic era were unable to mobilize recombinant plasmids carrying the oriT region of pCU1 or to complement transposon Tn5 mutations in the mob region of the closely related plasmid pKM101.     

Identification of a methylase gene for erythromycin resistance within the sequence of a spontaneously deleting fragment of Corynebacterium diphtheriae plasmid pNG2

Abstract A 9.6 Mda Corynebacterium diphtheriae plasmid, pNG2, mediates inducible resistance to erythromycin and other macrolide-lincosamide-streptogramin B (MLS) antibiotics. Spontaneous deletion of a 1.2 Mda fragment of pNG2 leaves the derivative plasmid incapable of conferring MLS-resistance on its host. The pNG2 region containing this fragment was sequenced as were the regions flanking it. The fragment contained 1606 bp, was flanked by almost perfect 23 bp inverted repeats, and appeared to be excised precisely. It contained an open reading frame encoding a leader protein plus a protein which was similar in its amino acid sequence to the rRNA methylases produced by other erythromycin-resistant, Gram-positive bacteria. The C. diphtheriae gene was named erm Cd.     

DNA segments of the IncX plasmid R485 determining replication and incompatibility with plasmid R6K

The expression of incompatibility properties between the IncX plasmids R6K and R485 of Escherichia coli was examined. For small autonomously replicating derivatives of both plasmid elements, the requirements for incompatibility expression include a functional R485 replicon and an active R6K beta-origin region. Functional R6K alpha and gamma origins are not directly involved in incompatibility expression between R6K and R485. A trans-acting replication system was constructed for plasmid R485. It consists of a 3.2-(kb) DNA fragment of R485 that specifies a product(s) in trans which supports replication from an R485 origin plasmid. A minimal R485 origin region of 591 bp was derived utilizing this trans-acting replication system and the nucleotide sequence of this origin region determined. The most striking feature of the sequence is the presence of six tandem 22-bp nucleotide sequence direct repeats.