Electrospun PLGA�Csilk fibroin�Ccollagen nanofibrous scaffolds for nerve tissue engineering

Electrospun nanofibrous scaffolds varying different materials are fabricated for tissue engineering. PLGA, silk fibroin, and collagen-derived scaffolds have been proved on good biocompatibility with neurons. However, no systematic studies have been performed to examine the PLGA-silk fibroin-collagen (PLGA-SF-COL) biocomposite fiber matrices for nerve tissue engineering. In this study, different weight ratio PLGA-SF-COL (50:25:25, 30:35:35) scaffolds were produced via electrospinning. The physical and mechanical properties were tested. The average fiber diameter ranged from 280 + 26 to 168 + 21 nm with high porosity and hydrophilicity; the tensile strength was 1.76 ± 0.32 and 1.25 ± 0.20 Mpa, respectively. The results demonstrated that electrospinning polymer blending is a simple and effective approach for fabricating novel biocomposite nanofibrous scaffolds. The properties of the scaffolds can be strongly influenced by the concentration of collagen and silk fibroin in the biocomposite. To assay the cytocompatibility, Schwann cells were seeded on the scaffolds; cell attachment, growth morphology, and proliferation were studied. SEM and MTT results confirmed that PLGA-SF-COL scaffolds particularly the one that contains 50% PLGA, 25% silk fibroin, and 25% collagen is more suitable for nerve tissue engineering compared to PLGA nanofibrous scaffolds.     

Hydrophilic gelatin and hyaluronic acid-treated PLGA scaffolds for cartilage tissue engineering

Tissue engineering provides a new strategy for repairing damaged cartilage. Surface and mechanical properties of scaffolds play important roles in inducing cell growth.?Aim: The aim of this study was to fabricate and characterize PLGA and gelatin/hyaluronic acid-treated PLGA (PLGA-GH) sponge scaffolds for articular cartilage tissue engineering. Methods: The PLGA-GH scaffolds were cross-linked with gelatin and hyaluronic acid. Primary chondrocytes isolated from porcine articular cartilages were used to assess cell compatibility. The characteristic PLGA-GH scaffold was higher in water uptake ratio and degradation rate within 42 days than the PLGA scaffold. Results: The mean compressive moduli of PLGA and PLGA-GH scaffolds were 1.72±0.50 MPa and 1.86±0.90 MPa, respectively. The cell attachment ratio, proliferation, and extracellular matrix secretion on PLGA-GH scaffolds are superior to those of PLGA scaffolds. Conclusions: In our study, PLGA-GH scaffolds exhibited improvements in cell biocompatibility, cell proliferation, extracellular matrix synthesis, and appropriate mechanical and structural properties for potential engineering cartilage applications.     

A biomimetic tubular scaffold with spatially designed nanofibers of protein/PDS® bio‐blends

Electrospun tubular conduit (4 mm inner diameter) based on blends of polydioxanone (PDS II®) and proteins such as gelatin and elastin having a spatially designed trilayer structure was prepared for arterial scaffolds. SEM analysis of scaffolds showed random nanofibrous morphology and well‐interconnected pore network. Due to protein blending, the fiber diameter was reduced from 800–950 nm range to 300–500 nm range. Fourier‐transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) results confirmed the blended composition and crystallinity of fibers. Pure PDS scaffold under hydrated state exhibited a tensile strength of 5.61 ± 0.42 MPa and a modulus of 17.11 ± 1.13 MPa with a failure strain of 216.7 ± 13%. The blending of PDS with elastin and gelatin has decreased the tensile properties. A trilayer tubular scaffold was fabricated by sequential electrospinning of blends of elastin/gelatin, PDS/elastin/gelatin, and PDS/gelatin (EG/PEG/PG) to mimic the complex matrix structure of native arteries. Under hydrated state, the trilayer conduit exhibited tensile properties (tensile strength of 1.77 ± 0.2 MPa and elastic modulus of 5.74 ± 3 MPa with a failure strain of 75.08 ± 10%) comparable to those of native arteries. In vitro degradation studies for up to 30 days showed about 40% mass loss and increase in crystallinity due to the removal of proteins and “cleavage‐induced crystallization” of PDS. Biotechnol. Bioeng. 2009; 104: 1025–1033. © 2009 Wiley Periodicals, Inc.     

Self-assembly of elastin-based peptides into the ECM: the importance of integrins and the elastin binding protein in elastic fiber assembly

The formation of a suitable extracellular matrix (ECM) that promotes cell adhesion, organization, and proliferation is essential within biomaterial scaffolds for tissue engineering applications. In this work, short elastin mimetic peptide sequences, EM-19 and EM-23, were engineered to mimic the active motifs of human elastin in hopes that they can stimulate ECM development in synthetic polymer scaffolds. Each peptide was incubated with human aortic smooth muscle cells (SMCs) and elastin and desmosine production were quantified after 48 h. EM-19 inhibited elastin production through competitive binding phenomena with the elastin binding protein (EBP), whereas EM-23, which contains an RGDS domain, induces recovery of elastin production at higher concentrations, alluding to a higher binding affinity for the integrins than for the EBP and the involvement of integrins in elastin production. Colocalization of each peptide with the elastin matrix was confirmed using immunofluorescent techniques. Our data suggest that with appropriate cell-binding motifs, we can simulate the cross-linking of tropoelastin into the developing elastin matrix using short peptide sequences. The potential for increased cell adhesion and the incorporation of elastin chains into tissue engineering scaffolds make these peptides attractive bioactive moieties that can easily be incorporated into synthetic biomaterials to induce ECM formation.     

Use of monocyte/endothelial cell co-cultures (in vitro) and a subcutaneous implant mouse model (in vivo) to evaluate a degradable polar hydrophobic ionic polyurethane

Potential benefits of co-culturing monocytes (MC) with vascular smooth muscle cells have been reported on for tissue engineering applications with a degradable, polar, hydrophobic, and ionic polyurethane (D-PHI). Since the interaction of MC and endothelial cells (EC) within the blood vessel endothelium is also a process of wound repair it was of interest to investigate their function when cultured on the synthetic D-PHI materials, prior to considering the materials' use in vascular engineering. The co-culture (MC/EC) in vitro studies were carried out on films in 96 well plates and porous scaffold disks were prepared for implant studies in an in vivo subcutaneous mouse model. After 7 days in culture, the MC/EC condition was equal to EC growth but had lower esterase activity (a measure of degradative potential), no pro-inflammatory TNF-α and a relatively high anti-inflammatory IL-10 release while the ECs maintained their functional marker CD31. After explantation of the porous scaffolds, a live/dead stain showed that the cells infiltrating the scaffolds were viable and histological stains (May-Grunwald, Trichrome) demonstrated tissue in growth and extracellular matrix synthesis. Lysates from the implant scaffolds analyzed with a cytokine antibody array showed decreased pro-inflammatory cytokines (IL-6, TNF-α, GM-CSF), increased anti-inflammatory cytokines (IL-10, IL-13, TNF-RI), and increased chemotactic cytokines (MCP-1, MCP-5, RANTES). The low foreign body response elicited by D-PHI when implanted in vivo supported the in vitro studies (EC and MC co-culture), demonstrating that D-PHI promoted EC growth along with an anti-inflammatory MC, further demonstrating its potential as a tissue engineering scaffold for vascular applications.     

Pulmonary arterial smooth muscle cells modulate cytokine- and LPS-induced cytotoxicity in endothelial cells

Cytokines and lipopolysaccharide (LPS) are known to be injurious to vascular endothelial cells (ECs), but the influence of adjacent vascular smooth muscle cells (SMCs) on this injury is unknown. Exposure of cultured rat (RPMECs) or human (HPMECs) pulmonary microvascular ECs on tissue culture plastic to a mixture of cytokines (interleukin-1beta, tumor necrosis factor-alpha, and interferon-gamma) and LPS (cytomix) resulted in a significant increase in (51)Cr release to 35-40%. When unstimulated RPMECs were cocultured with cytomix-pretreated rat pulmonary microvascular SMCs (RPMSMCs) there was an increase in (51)Cr release to 8.4%, which was nitric oxide dependent. However, when RPMECs or HPMECs were stimulated in direct contact with their respective SMCs, rather than a further increase in cytomix-induced injury (e.g., >35-40%), (51)Cr release decreased to <10%. This cytoprotection was fully reproduced with fixed RPMSMCs, and partially reproduced by plating HPMECs on gelatin. These data show that the direct toxicity of a cytokine and endotoxin mixture on cultured ECs can be reduced by contact with vascular smooth muscle.     

Collagen type IV-specific tripeptides for selective adhesion of endothelial and smooth muscle cells

Controlling the balance of endothelial cells (ECs) and smooth muscle cells (SMCs) in blood vessels is critically important to minimize the risk associated with vascular implants. Extracellular matrix (ECM) plays a key role in controlling the cellular balance, suggesting a promising source of cell-selective peptides. To obtain EC- or SMC-selective peptides, we start by highlighting sequence differences found among ECM molecules as enriched targets for cell-selective peptides. We explored the EC- or SMC-selective performance of tripeptides that are specifically enriched only in collagen type IV, but not in types I, II, III, and V. Collagen type IV was chosen since it is the major ECM in the basement membrane of blood vessels, which separates ECs and SMCs. Among 114 collagen type IV-derived tripeptides pre-screened from in silico analysis, 22 peptides (19%) were found to promote cell-selective adhesion, as determined by peptide array. One of the best performing EC-selective peptides (Cys-Ala-Gly (CAG)) was mixed into an electrospun fine-fiber, a vascular graft material, for practical application. Compared to unmodified fiber, the CAG containing fiber surface was found to enhance adhesion of ECs (+190%) while limiting SMCs (-20%). These results are not only consistent with the hypothesis of ECM as a source of cell selective peptides, but also suggest a new genre of EC- or SMC-selective peptides for tissue engineering applications. Collectively, these findings favorably support the screening approach used to discover new peptides for these purposes.     

Inhibition of capillary endothelial cell growth by pericytes and smooth muscle cells

Morphological studies of developing capillaries and observations of alterations in capillaries associated with pathologic neovascularization indicate that pericytes may act as suppressors of endothelial cell (EC) growth. We have developed systems that enable us to investigate this possibility in vitro. Two models were used: a co-culture system that allowed direct contact between pericytes and ECs and a co-culture system that prevented physical contact but allowed diffusion of soluble factors. For these studies, co-cultures were established between bovine capillary ECs and the following growth-arrested cells (hereafter referred to as modulating cells): pericytes, smooth muscle cells (SMCs), fibroblasts, epithelial cells, and 3T3 cells. The modulating cell type was growth arrested by treatment with mitomycin C before co-culture with ECs. In experiments where cells were co-cultured directly, the effect of co-culture on EC growth was determined by comparing the mean number of cells in the co-cultures to the mean for each cell type (EC and modulating cell) cultured separately. Since pericytes and other modulating cells were growth arrested, any cell number change in co-cultures was due to EC growth. In the co-cultures, pericytes inhibited all EC proliferation throughout the 14-d time course; similar levels of EC inhibition were observed in SMC-EC co-cultures. Co-culture of ECs with fibroblasts, epithelial cells, and 3T3 cells significantly stimulated EC growth over the same time course (30-192% as compared to EC cultured alone). To determine if cell contact was required for inhibition, cells were co-cultured using Millicell chambers (Millipore Corp., Bedford, MA), which separated the cell types by 1-2 mm but allowed the exchange of diffusible materials. There was no inhibition of EC proliferation by pericytes or SMCs in this co-culture system. The influence of the cell ratios on observed inhibition was assessed by co-culturing the cells at EC/pericyte ratios of 1:1, 2:1, 5:1, 10:1, and 20:1. Comparable levels of EC inhibition were observed at ratios from 1:1 to 10:1. When the cells were co-cultured at a ratio of 20 ECs to 1 pericyte, inhibition of EC growth at 3 d was similar to that observed at other ratios. However, at higher ratios, the inhibition diminished so that by the end of the time course the co-cultured ECs were growing at the same rate as the controls. These results suggest that pericytes and SMCs can modulate EC growth by a mechanism that requires contact or proximity. We postulate that similar interactions may operate to modulate vascular growth in vivo.     

内皮细胞生长状态对血管平滑肌细胞增生迁移的影响

实验通过建立细胞共培养体系,探讨内皮细胞生长状态对血管平滑肌细胞增生迁移的影响及机制。检测指标包括~3H-TdR掺入、细胞周期、细胞迁移计数和α-SM-actin mRNA表达。结果显示,融合生长内皮使平滑肌细胞~3H-TdR掺入量明显降低,增加平滑肌细胞停留在G_0/G_1期的比例,上调平滑肌细胞α-SM-actin mRNA表达;而对数生长内皮细胞使平滑肌细胞~3H-TdR掺入量明显升高,促进平滑肌细胞由 G_0/G_1期进入G_2/M和S期,下调平滑肌细胞α-SM-actin mRNA表达。对照组平滑肌细胞在基础状态下存在少量迁移,对数增殖内皮细胞组平滑肌迁移数比对照组增高约4倍(P<0.01),而融合生长内皮细胞组平滑肌迁移数仅为对照组的0.5倍(P<0.05)。结果提示内皮细胞生长状态不同,对平滑肌细胞生物学特性的影响也不同,增殖期内皮明显促进平滑肌细胞增生迁移、下调平滑肌细胞α-SM-actin mRNA表达。     

担载b-FGF的PLGA微球复合明胶支架的体外释放研究

目的:研究担载碱性成纤维细胞生长因子(b-FGF)微球复合明胶支架的外形特征、孔径、孔隙率及体外释放动力学,以期构建具有缓释功能、高孔隙率的担载细胞因子的新型复合明胶支架。方法:本文利用冷冻相分离法和S/O/W法先将b-FGF水溶液包裹于PLGA微球中,然后埋置于明胶溶液中制备为多孔复合明胶支架。分别对微球的形态和复合明胶支架的基本形态、孔径、孔隙率进行表征,通过Elisa法测定b-FGF在复合明胶支架中的体外释放行为。结果:制备成形态良好的三维复合明胶支架,其孔隙率为82.90%±1.45%,孔径范围为150~300μm,复合明胶支架中b-FGF在体外缓慢释放20余天。结论:担载蛋白微球复合明胶支架不仅满足组织工程支架的要求,还能有效缓释细胞因子,为细胞和组织生长提供良好的微环境,为进一步应用于组织工程领域提供了可能。     

Cyclic mechanical strain regulates the development of engineered smooth muscle tissue.

We show that the appropriate combinations of mechanical stimuli and polymeric scaffolds can enhance the mechanical properties of engineered tissues. The mechanical properties of tissues engineered from cells and polymer scaffolds are significantly lower than the native tissues they replace. We hypothesized that application of mechanical stimuli to engineered tissues would alter their mechanical properties. Smooth muscle tissue was engineered on two different polymeric scaffolds and subjected to cyclic mechanical strain. Short-term application of strain increased proliferation of smooth muscle cells (SMCs) and expression of collagen and elastin, but only when SMCs were adherent to specific scaffolds. Long-term application of cyclic strain upregulated elastin and collagen gene expression and led to increased organization in tissues. This resulted in more than an order of magnitude increase in the mechanical properties of the tissues.     

Smooth muscle cell rigidity and extracellular matrix organization influence endothelial cell spreading and adhesion formation in coculture

Efforts to develop functional tissue-engineered blood vessels have focused on improving the strength and mechanical properties of the vessel wall, while the functional status of the endothelium within these vessels has received less attention. Endothelial cell (EC) function is influenced by interactions between its basal surface and the underlying extracellular matrix. In this study, we utilized a coculture model of a tissue-engineered blood vessel to evaluate EC attachment, spreading, and adhesion formation to the extracellular matrix on the surface of quiescent smooth muscle cells (SMCs). ECs attached to and spread on SMCs primarily through the alpha(5)beta(1)-integrin complex, whereas ECs used either alpha(5)beta(1)- or alpha(v)beta(3)-integrin to spread on fibronectin (FN) adsorbed to plastic. ECs in coculture lacked focal adhesions, but EC alpha(5)beta(1)-integrin bound to fibrillar FN on the SMC surface, promoting rapid fibrillar adhesion formation. As assessed by both Western blot analysis and quantitative real-time RT-PCR, coculture suppressed the expression of focal adhesion proteins and mRNA, whereas tensin protein and mRNA expression were elevated. When attached to polyacrylamide gels with similar elastic moduli as SMCs, focal adhesion formation and the rate of cell spreading increased relative to ECs in coculture. Thus, the elastic properties are only one factor contributing to EC spreading and focal adhesion formation in coculture. The results suggest that the softness of the SMCs and the fibrillar organization of FN inhibit focal adhesions and reduce cell spreading while promoting fibrillar adhesion formation. These changes in the type of adhesions may alter EC signaling pathways in tissue-engineered blood vessels.     

Activation of heme oxygenase-1 by laminar shear stress ameliorates high glucose-induced endothelial cell and smooth muscle cell dysfunction

High glucose (HG)-induced endothelial cell (EC) and smooth muscle cell (SMC) dysfunction is critical in diabetes-associated atherosclerosis. However, the roles of heme oxygenase-1 (HO-1), a stress-response protein, in hemodynamic force-generated shear stress and HG-induced metabolic stress remain unclear. This investigation examined the cellular effects and mechanisms of HO-1 under physiologically high shear stress (HSS) in HG-treated ECs and adjacent SMCs. We found that exposure of human aortic ECs to HSS significantly increased HO-1 expression; however, this upregulation appeared to be independent of adenosine monophosphate-activated protein kinase, a regulator of HO-1. Furthermore, HSS inhibited the expression of HG-induced intercellular adhesion molecule-1, vascular cell adhesion molecule-1, and reactive oxygen species (ROS) production in ECs. In an EC/SMC co-culture, compared with static conditions, subjecting ECs close to SMCs to HSS and HG significantly suppressed SMC proliferation while increasing the expression of physiological contractile phenotype markers, such as α-smooth muscle actin and serum response factor. Moreover, HSS and HG decreased the expression of vimentin, an atherogenic synthetic phenotypic marker, in SMCs. Transfecting ECs with HO-1-specific small interfering (si)RNA reversed HSS inhibition on HG-induced inflammation and ROS production in ECs. Similarly, reversed HSS inhibition on HG-induced proliferation and synthetic phenotype formation were observed in co-cultured SMCs. Our findings provide insights into the mechanisms underlying EC-SMC interplay during HG-induced metabolic stress. Strategies to promote HSS in the vessel wall, such as continuous exercise, or the development of HO-1 analogs and mimics of the HSS effect, could provide an effective approach for preventing and treating diabetes-related atherosclerotic vascular complications.     

Conjugation of heparin into carboxylated pullulan derivatives as an extracellular matrix for endothelial cell culture

A carboxylated pullulan, for use as a structural material for a number of tissue engineering applications, was synthesized and conjugated with heparin. By immobilization of heparin to pullulan, endothelial cells (ECs) attached on the heparin-conjugated pullulan were more aggregated than when attached to other pullulan derivatives. Attachments were 50, 45, 49, and 90% for a polystyrene dish, pullulan acetate, carboxylated pullulan, and heparin-conjugated pullulan, respectively. Heparin-conjugated pullulan inhibited the proliferation of smooth muscle cells (SMCs) in vitro. Heparin-conjugated pullulan material can thus be used for the proliferation of vascular ECs and to inhibit the proliferation of SMCs.     

Construction of vascular tissues with macro-porous nano-fibrous scaffolds and smooth muscle cells enriched from differentiated embryonic stem cells

Vascular smooth muscle cells (SMCs) have been broadly used for constructing tissue-engineered blood vessels. However, the availability of mature SMCs from donors or patients is very limited. Derivation of SMCs by differentiating embryonic stem cells (ESCs) has been reported, but not widely utilized in vascular tissue engineering due to low induction efficiency and, hence, low SMC purity. To address these problems, SMCs were enriched from retinoic acid induced mouse ESCs with LacZ genetic labeling under the control of SM22α promoter as the positive sorting marker in the present study. The sorted SMCs were characterized and then cultured on three-dimensional macro-porous nano-fibrous scaffolds in vitro or implanted subcutaneously into nude mice after being seeded on the scaffolds. Our data showed that the LacZ staining, which reflected the corresponding SMC marker SM22α expression level, was efficient as a positive selection marker to dramatically enrich SMCs and eliminate other cell types. After the sorted cells were seeded into the three-dimensional nano-fibrous scaffolds, continuous retinoic acid treatment further enhanced the SMC marker gene expression level while inhibited pluripotent maker gene expression level during the in vitro culture. Meanwhile, after being implanted subcutaneously into nude mice, the implanted cells maintained the positive LacZ staining within the constructs and no teratoma formation was observed. In conclusion, our results demonstrated the potential of SMCs derived from ESCs as a promising cell source for therapeutic vascular tissue engineering and disease model applications.     

Scaffolds for engineering smooth muscle under cyclic mechanical strain conditions

Cyclic mechanical strain has been demonstrated to enhance the development and function of engineered smooth muscle (SM) tissues, but appropriate scaffolds for engineering tissues under conditions of cyclic strain are currently lacking. These scaffolds must display elastic behavior, and be capable of inducing an appropriate smooth muscle cell (SMC) phenotype in response to mechanical signals. In this study, we have characterized several scaffold types commonly utilized in tissue engineering applications in order to select scaffolds that exhibit elastic properties under appropriate cyclic strain conditions. The ability of the scaffolds to promote an appropriate SMC phenotype in engineered SM tissues under cyclic strain conditions was subsequently analyzed. Poly(L-lactic acid)-bonded polyglycolide fiber-based scaffolds and type I collagen sponges exhibited partially elastic mechanical properties under cyclic strain conditions, although the synthetic polymer scaffolds demonstrated significant permanent deformation after extended times of cyclic strain application. SM tissues engineered with type I collagen sponges subjected to cyclic strain were found to contain more elastin than control tissues, and the SMCs in these tissues exhibited a contractile phenotype. In contrast, SMCs in control tissues exhibited a structure more consistent with the nondifferentiated, synthetic phenotype. These studies indicate the appropriate choice of a scaffold for engineering tissues in a mechanically dynamic environment is dependent on the time frame of the mechanical stimulation, and elastic scaffolds allow for mechanically directed control of cell phenotype in engineered tissues.     

Electrospun tecophilic/gelatin nanofibers with potential for small diameter blood vessel tissue engineering

Tissue engineering techniques particularly using electrospun scaffolds have been intensively used in recent years for the development of small diameter vascular grafts. However, the development of a completely successful scaffold that fulfills multiple requirements to guarantee complete vascular regeneration remains challenging. In this study, a hydrophilic and compliant polyurethane namely Tecophilic (TP) blended with gelatin (gel) at a weight ratio of 70:30 (TP(70)/gel(30)) was electrospun to fabricate a tubular composite scaffold with biomechanical properties closely simulating those of native blood vessels. Hydrophilic properties of the composite scaffold induced non‐thrombogenicity while the incorporation of gelatin molecules within the scaffold greatly improved the capacity of the scaffold to serve as an adhesive substrate for vascular smooth muscle cells (SMCs), in comparison to pure TP. Preservation of the contractile phenotype of SMCs seeded on electrospun TP(70)/gel(30) was yet another promising feature of this scaffold. The nanostructured TP(70)/gel(30) demonstrated potential feasibility toward functioning as a vascular graft. © 2014 Wiley Periodicals, Inc. Biopolymers 101: 1165–1180, 2014.     

DNA microarray study on gene expression profiles in co-cultured endothelial and smooth muscle cells in response to 4- and 24-h shear stress

Shear stress, a major hemodynamic force acting on the vessel wall, plays an important role in physiological processes such as cell growth, differentiation, remodelling, metabolism, morphology, and gene expression. We investigated the effect of shear stress on gene expression profiles in co-cultured vascular endothelial cells (ECs) and smooth muscle cells (SMCs). Human aortic ECs were cultured as a confluent monolayer on top of confluent human aortic SMCs, and the EC side of the co-culture was exposed to a laminar shear stress of 12 dyn/cm² for 4 or 24 h. After shearing, the ECs and SMCs were separated and RNA was extracted from the cells. The RNA samples were labelled and hybridized with cDNA array slides that contained 8694 genes. Statistical analysis showed that shear stress caused the differential expression (p ≤ 0.05) of a total of 1151 genes in ECs and SMCs. In the co-cultured ECs, shear stress caused the up-regulation of 403 genes and down-regulation of 470. In the co-cultured SMCs, shear stress caused the up-regulation of 152 genes and down-regulation of 126 genes. These results provide new information on the gene expression profile and its potential functional consequences in co-cultured ECs and SMCs exposed to a physiological level of laminar shear stress. Although the effects of shear stress on gene expression in monocultured and co-cultured EC are generally similar, the response of some genes to shear stress is opposite between these two types of culture (e.g., ICAM-1 is up-regulated in monoculture and down-regulated in co-culture), which strongly indicates that EC–SMC interactions affect EC responses to shear stress.     

Oxidized alginate-cross-linked alginate/gelatin hydrogel fibers for fabricating tubular constructs with layered smooth muscle cells and endothelial cells in collagen gels

Hydrogel fibers that possessed a cell-adhesive surface and were degradable via enzymatic reactions were developed for fabricating tubular constructs with smooth muscle cell (SMC) and endothelial cell (EC) layers, similar to native blood vessels, in collagen gels. The fibers were prepared by soaking hydrogel fibers prepared from a solution of sodium alginate and gelatin containing bovine ECs (BECs) in medium containing oxidized alginate (AO). BECs soaked in 8.0% (w/v) AO showed no reduction in viability within 3 h of soaking. Furthermore, mouse SMCs (MSMCs) adhered and proliferated on the AO-cross-linked hydrogels. Based on these results, we prepared AO-cross-linked hydrogel fibers containing BECs, covered their surface with MSMCs, and embedded them in collagen gels. We then degraded the fibers using alginate lyase to obtain channels in the collagen gels. Histological analysis of the released ECs using a specific fluorescent dye revealed the formation of tubular structures with layered BECs and MSMCs.