Construction of shuttle vectors useful for transforming Clostridium acetobutylicum

The symbiotic plasmid (pSym) DNA present in bacteroids of strain RCR1001 of Rhizobium leguminosarum biovar viceae has been compared qualitatively and quantitatively with that present in free living bacteria by hybridization experiments with appropriate probes. A decrease in the relative amount of pSym DNA was observed in bacteroids as compared to bacteria. No rearrangements of the symbiotically expressed pSym borne genes were detected in bacteroids.     

Construction of a sequenced Clostridium perfringens-Escherichia coli shuttle plasmid.

A new Clostridium perfringens-Escherichia coli shuttle plasmid has been constructed and its complete DNA sequence compiled. The vector, pJIR418, contains the replication regions from the C. perfringens replicon pIP404 and the E. coli vector pUC18. The multiple cloning site and lacZ' gene from pUC18 are also present, which means that X-gal screening can be used to select recombinants in E. coli. Both chloramphenicol and erythromycin resistance can be selected in C. perfringens and E. coli since pJIR418 carries the C. perfringens catP and ermBP genes. Insertional inactivation of either the catP or ermBP genes can also be used to directly screen recombinants in both organisms. The versatility of pJIR418 and its applicability for the cloning of toxin genes from C. perfringens have been demonstrated by the manipulation of a cloned gene encoding the production of phospholipase C.     

Isolation of a single-stranded plasmid from Clostridium acetobutylicum NCIB 6444.

The cryptic plasmid pDM6 was isolated from late exponential-phase cells of Clostridium acetobutylicum NCIB 6444 by either alkaline lysis or electroporation. The application of high voltage during electroporation resulted in higher DNA yield than did the alkaline lysis procedure. However, electroporation-induced plasmid release generated high amounts of single-stranded DNA compared with the alkaline lysis procedure, which generated both double-stranded DNA (monomer and dimer forms) and single-stranded DNA.     

Isolation of a single-stranded plasmid from Clostridium acetobutylicum NCIB 6444

The cryptic plasmid pDM6 was isolated from late exponential-phase cells of Clostridium acetobutylicum NCIB 6444 by either alkaline lysis or electroporation. The application of high voltage during electroporation resulted in higher DNA yield than did the alkaline lysis procedure. However, electroporation-induced plasmid release generated high amounts of single-stranded DNA compared with the alkaline lysis procedure, which generated both double-stranded DNA (monomer and dimer forms) and single-stranded DNA.     

Sequence and properties of pIM13, a macrolide-lincosamide-streptogramin B resistance plasmid from Bacillus subtilis.

We initiated a study of pIM13, a multicopy, macrolide-lincosamide-streptogramin B (MLS) plasmid first isolated from a strain of Bacillus subtilis and described by Mahler and Halvorson (J. Gen. Microbiol. 120:259-263, 1980). The copy number of this plasmid was about 200 in B. subtilis and 30 in Staphylococcus aureus. The MLS resistance determinant of pIM13 was shown to be highly homologous to ermC, an inducible element on the S. aureus plasmid pE194. The product of the pIM13 determinant was similar in size to that of ermC and immunologically cross-reactive with it. The MLS resistance of pIM13 was expressed constitutively. The complete base sequence of pIM13 is presented. The plasmid consisted of 2,246 base pairs and contained two open reading frames that specified products identified in minicell extracts. One was a protein of 16,000 molecular weight, possibly required for replication. The second was the 29,000-molecular-weight MLS resistance methylase. The regulatory region responsible for ermC inducibility was missing from pIM13, explaining its constitutivity. The remainder of the pIM13 MLS determinant was nearly identical to ermC. The ends of the region of homology between pIM13 and pE194 were associated with hyphenated dyad symmetries. A segment partially homologous to one of these termini on pIM13 and also associated with a dyad was found in pUB110 near the end of a region of homology between that plasmid and pBC16. The entire sequence of pIM13 was highly homologous to that of pE5, an inducible MLS resistance plasmid from S. aureus that differs from pIM13 in copy control.     

Comparative analysis on the membrane proteome of Clostridium acetobutylicum wild type strain and its butanol-tolerant mutant

The solventogenic bacterium Clostridium acetobutylicum is the most important species of Clostridium used in the fermentation industry. However, the intolerance to butanol hampers the efficient production of solvents. Butanol toxicity has been attributed to the chaotropic effect on the cell membrane, but the knowledge on the effect of butanol on membrane associated proteins is quite limited. Using 2-DE combined with MALDI-TOF MS/MS and 1-DE integrated with LC-MS/MS, 341 proteins in the membrane fractions of cell lysate were identified, thus establishing the first comprehensive membrane proteome of C. acetobutylicum. The identified proteins are mainly involved in transport, cellular membrane/wall machinery, formation of surface coat and flagella, and energy metabolism. Comparative analysis on the membrane proteomes of the wild type strain DSM 1731 and its butanol-tolerant mutant Rh8 revealed 73 differentially expressed proteins. Hierarchical clustering analysis suggested that mutant Rh8 may have evolved a more stabilized membrane structure, and have developed a cost-efficient energy metabolism strategy, to cope with the butanol challenge. This comparative membrane proteomics study, together with our previous published work on comparative cytoplasmic proteomics, allows us to obtain a systemic understanding of the effect of butanol on cellular physiology of C. acetobutylicum.     

Characterisation of a transposon-induced pleiotropic mutant of Clostridium acetobutylicum P262

Transposon-induced metronidazole resistance was used as a selection system for the isolation of Clostridium acetobutylicum P262 mutants with altered electron transport pathways. The metronidazole resistant transconjugant of interest, mutant 3R, displayed resistance to DNA damaging agents, UV and bleomycin, and harboured a single transposon insertion within a structural gene, designated sum(susceptibility to metronidazole). The sum gene encoded a 334 amino-acid protein, with 36% identity and 57-58% similarity at the amino acid level to two archaebacterial protein sequences which appear to represent a class of uncharacterised reductase enzymes. Physiological studies of mutant 3R revealed a number of pleiotropic characteristics which included enhanced autolysin activity, increased motility, impaired clostridial cell formation, and resistance to the toxic tripeptide analogue, bialaphos. The introduction of the sum gene in multiple copies on a plasmid vector into the related strain Clostridium beijerinckii NCIMB 8052, resulted in inhibition of cell division, motility and autolysin activity. The sum gene appears to be a member of a new subgroup of activases with reducing activity, which may control a regulon affecting different stationary phase processes such as clostridial differentiation and sporulation in C. acetobutylicum P262. The metronidazole resistant phenotype of the sum mutant can be attributed to an increased capacity for DNA repair.     

Transformation of Clostridium perfringens L forms with shuttle plasmid DNA.

L-form (L-phase) cultures of Clostridium perfringens were tested for their transformability with plasmid DNA. Three L-form strains were transformable, but one, strain L-13, was superior to the others. This strain was easily and reproducibly transformed with previously described shuttle vectors which were derived from either C. perfringens or Escherichia coli. Strain L-13 was transformable by a variety of methods, and a new micromethod worked well under both aerobic and anaerobic conditions. The maximal number of transformants was attained after strain L-13 was exposed for 4 h to the transforming DNA and polyethylene glycol. Viable counts determined in tubes of semisolid brain heart infusion medium containing 10% sucrose, with or without 2 micrograms of tetracycline per ml, showed a transformation rate of 3.9 X 10(-5) (transformants per viable cells).     

Electroporation of, plasmid isolation from and plasmid conservation in Clostridium acetobutylicum DSM 792

Procedures have been developed allowing recombinant DNA work with Clostridium acetobutylicum DSM 792. Electroporation was used to introduce plasmid DNA into exponentially growing clostridial cells and 6 × 10² transformants/μg DNA could be obtained at a time constant of 5.5 ms, 1.8 kV, 50 μF, and 600 Ω. The method also allowed the taxonomic group IV strain NI-4082 to be transformed (10¹ transformants/μg DNA). Plasmid preparation from recombinant clostridia was optimal when a modification of the alkaline lysis method was employed. It was also important to use cells from the mid-logarithmic growth phase. Recombinant strains could be easily preserved as spore suspensions; under all conditions tested plasmids were maintained. Received: 17 March 1998 / Received revision: 17 August 1998 / Accepted: 26 August 1998     

Development of a new shuttle plasmid system for Escherichia coli and Clostridium perfringens.

We constructed a 7.9-kilobase-pair recombinant shuttle plasmid, designated pHR106, by combining desired segments of three plasmids: an Escherichia coli plasmid (pSL100) which provides a multiple cloning site, a Clostridium perfringens plasmid (pJU122) which provides a clostridial origin of replication, and an E. coli plasmid (pJIR62) which provides an E. coli origin of replication, an ampicillin resistance gene, and a chloramphenicol resistance gene of clostridial origin. The shuttle plasmid transformed E. coli HB101 with a frequency of 1 transformant per 10(4) viable cells and C. perfringens L-phase strain L-13 with a frequency of approximately 1 transformant per 10(6) viable cells. Because of the set of unique cloning sites and the chloramphenicol resistance marker, this shuttle plasmid should be particularly useful for studies of gene regulation and for enzyme production with C. perfringens.     

Stable shuttle vectors for Neisseria gonorrhoeae, Haemophilus spp. and other bacteria based on a single origin of replication

An origin of replication (ori) was obtained from a naturally occurring beta-lactamase-producing plasmid isolated from Neisseria gonorrhoeae and used to construct shuttle vectors capable of replicating in N. gonorrhoeae, Haemophilus ducreyi, Haemophilus influenzae and Escherichia coli. Using the gonococcal proAB genes, we complemented proline-requiring N. gonorrhoeae F62 and E. coli HB101 in trans. The first demonstration of the expression of the green fluorescent protein (GFP) in either N. gonorrhoeae or H. ducreyi was shown using this vector, indicating that GFP may be a useful tool in the analysis of these organisms. This is the first report of a gonococcal vector based on a broad host range, genetically defined ori, and should facilitate the molecular analysis of gonococcal and Haemophilus genes.     

Stable Escherichia coli-Clostridium acetobutylicum shuttle vector for secretion of murine tumor necrosis factor alpha.

Recombinant plasmids were constructed to secrete mouse tumor necrosis factor alpha (mTNF-alpha) from Clostridium acetobutylicum. The shuttle plasmids contained the clostridial endo-beta1, 4-glucanase (eglA) promoter and signal sequence that was fused in frame to the mTNF-alpha cDNA. The construction was first tested in Escherichia coli and then introduced in C. acetobutylicum DSM792 by electroporation. Controls confirmed the presence and stability of the recombinant plasmids in this organism. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis and an in vitro cytotoxic assay were used to monitor expression and secretion of mTNF-alpha during growth. Significant levels of biologically active mTNF-alpha were measured in both lysates and supernatants. The present report deals with investigations on the elaboration of a gene transfer system for cancer treatment using anaerobic bacteria.     

Effects of butanol on Clostridium acetobutylicum.

The internal pH of Clostridium acetobutylicum was determined at various stages during the growth of the organism. Even in the presence of significant quantities of acetic, butyric, and lactic acids, an internal pH of 6.2 was maintained. Experiments using N,N'-dicyclohexylcarbodiimide indicated that a functioning H+-ATPase is necessary for internal pH control. Butanol, one of the end products of the fermentation, had numerous harmful effects on C. acetobutylicum. At a concentration high enough to inhibit growth, butanol destroyed the ability of the cell to maintain internal pH, lowered the intracellular level of ATP, and inhibited glucose uptake. Experiments done at two different external pH values suggested that the butanol-mediated decrease in ATP concentration was independent of the drop in internal pH. Glucose uptake was not affected by arsenate, suggesting that uptake was not ATP dependent. The effects of butanol on C. acetobutylicum are complex, inhibiting several interrelated membrane processes.     

Stable inheritance of plasmid R1 requires two different loci.

The largest EcoRI fragment from plasmid R1 mediates a stability phenotype which is required to ensure the stable inheritance of this low-copy-number plasmid. When covalently linked to small, unstable R1 derivatives, this fragment makes the plasmids as stable as the wild-type R1 plasmid. A genetic analysis showed that two independently acting stabilization functions are encoded by this EcoRI fragment, both of which have the potential of partial stabilization of mini-R1 plasmids. The two loci are located at opposite ends of the fragment. Stabilization was also obtained by inserting these regions in unrelated, unstable plasmids from the p15 group. One of the two functions was very efficient in stabilizing such foreign replicons. Besides the stability phenotype, these genes exert incompatibility in an allele-specific manner. The stability functions do not seem to interfere seriously with the copy number of the plasmid.     

The genes for butanol and acetone formation in Clostridium acetobutylicum ATCC 824 reside on a large plasmid whose loss leads to degeneration of the strain.

Degeneration is the process whereby Clostridium acetobutylicum ATCC 824 loses the capacity to produce acetone and butanol after repeated vegetative transfers or in continuous culture. Two degenerate mutants (M5 and DG1) of C. acetobutylicum ATCC 824 do not contain the four genes (ctfA, ctfB, adc, and aad) for acetone and butanol formation. Strain ATCC 824 contains a 210-kb plasmid (pSOL1) which is absent in M5 and DG1. pSOL1 carries the four acetone and butanol formation genes. A restriction map of pSOL1 was constructed by using ApaI, SmaI, SstII, and NarI digestions. M5 and DG1 could be complemented for acetone and butanol formation by expressing the corresponding genes (ctfA, ctfB, and adc for acetone; aad for butanol) on the plasmid. Degeneration of this strain thus appears to be the result of pSOL1 loss.     

Transformation of Clostridium perfringens L forms with shuttle plasmid DNA

L-form (L-phase) cultures of Clostridium perfringens were tested for their transformability with plasmid DNA. Three L-form strains were transformable, but one, strain L-13, was superior to the others. This strain was easily and reproducibly transformed with previously described shuttle vectors which were derived from either C. perfringens or Escherichia coli. Strain L-13 was transformable by a variety of methods, and a new micromethod worked well under both aerobic and anaerobic conditions. The maximal number of transformants was attained after strain L-13 was exposed for 4 h to the transforming DNA and polyethylene glycol. Viable counts determined in tubes of semisolid brain heart infusion medium containing 10% sucrose, with or without 2 micrograms of tetracycline per ml, showed a transformation rate of 3.9 X 10(-5) (transformants per viable cells).     

Transformation of members of the genus Haloarcula with shuttle vectors based on Halobacterium halobium and Haloferax volcanii plasmid replicons.

We have stably transformed both Haloarcula vallismortis and Haloarcula hispanica with the halobacterium-Escherichia coli shuttle vectors pWL102 (based on the Haloferax volcanii pHV2 replicon) and pUBP2 (based on the Halobacterium halobium pHH1 replicon). Haloferax volcanii, Halobacterium halobium, and Haloarcula vailismortis are equally distant from one another and span the phylogenetic depth of the halophilic Archaea; thus, these vectors may be generally useful for the halophiles. Both Haloarcula vallismortis and Haloarcula hispanica exhibit previously unreported complex life cycles and are therefore significant as genetically approachable models of cellular differentiation within the Archaea.     

CAC2634-disrupted mutant of Clostridium acetobutylicum can be electrotransformed in air

Aims: To simplify the electrotransformation process of Clostridium acetobutylicum, which currently needs to be performed in an anaerobic chamber, thus laborious and time‐consuming. Methods and Results: The CAC2634 gene encoding PerR is a known peroxide regulon repressor in Cl. acetobutylicum. CAC2634 in a previously constructed Restriction–Modification system deficient Cl. acetobutylicum mutant SMB009 was disrupted using ClosTron method. The resulted mutant SMB012 can be electrotransformed in air with an efficiency of 1·2–3·1 × 10³ transformants μg^?1 DNA. Conclusions: We demonstrated that the disruption of CAC2634 in Cl. acetobutylicum enables its electrotransformation in air. Significance and Impact of the Study: The electrotransformation process of Cl. acetobutylicum could be significantly simplified, especially when operating multiple electrotransformations.     

Construction of new shuttle plasmid vectors for Escherichia coli-Bacteroides transgeneric cloning

Abstract An Escherichia coli-Bacteroides shuttle vehicle (pKBF367-1) was constructed by combining the pBR322 derivative pKC7 (5.9 kb) with [1] a 4.6 kb cryptic plasmid from Bacteroides fragilis ; and [2] the 4.2 kb Eco RI-B fragment of the B. fragilis plasmid pBFTM10. This latter component allowed selection of clindamycin-resistant transconjugants upon helper plasmid-mediated transfer to a recipient strain of Bacteroides distasonis . To improve the potential of pKBF367-1 (14.7 kb) as cloning vector, successive deletions generated derivatives of 12.8, 10.5 and 9.3 kb, which were still able to replicate in B. distasonis 419. These bifunctional vectors were successfully employed to introduce transposon Tn 501 (Hg^r) into B. distasonis 419, but expression of mercury resistance was not observed. This plasmid vehicles series may be useful for cloning Bacteroides genes in E. coli and studying their expression in a heterologous Bacteroides strain.