Muscle‐induced loading as an important source of variation in craniofacial skeletal shape

The shape of the craniofacial skeleton is constantly changing through ontogeny and reflects a balance between developmental patterning and mechanical‐load‐induced remodeling. Muscles are a major contributor to producing the mechanical environment that is crucial for “normal” skull development. Here, we use an F₅ hybrid population of Lake Malawi cichlids to characterize the strength and types of associations between craniofacial bones and muscles. We focus on four bones/bone complexes, with different developmental origins, alongside four muscles with distinct functions. We used micro‐computed tomography to extract 3D information on bones and muscles. 3D geometric morphometrics and volumetric measurements were used to characterize bone and muscle shape, respectively. Linear regressions were performed to test for associations between bone shape and muscle volume. We identified three types of associations between muscles and bones: weak, strong direct (i.e., muscles insert directly onto bone), and strong indirect (i.e., bone is influenced by muscles without a direct connection). In addition, we show that although the shape of some bones is relatively robust to muscle‐induced mechanical stimulus, others appear to be highly sensitive to muscular input. Our results imply that the roles for muscular input on skeletal shape extend beyond specific points of origin or insertion and hold significant potential to influence broader patterns of craniofacial geometry. Thus, changes in the loading environment, either as a normal course of ontogeny or if an organism is exposed to a novel environment, may have pronounced effects on skeletal shape via near and far‐ranging effects of muscular loading.     

The influence of experimental deformation on craniofacial development in rats

Cranial deformation was produced experimentally in rats 8 to 40 days old for the purpose of studying the rotation of the craniofacial bones and the modification of the growth rates of the functional cranial components. One hundred and twenty four skulls (65 males and 59 females) were employed, classified as: deformed , deformed-hydrocephalic, sham-operated and controls. A midsagittal diagram was drawn for each skull and the angle subtended by each bone with respect to the vestibular plane was measured. Growth indices were worked out for both the neural skull and the facial skull. Deformation altered the rotation of the parietal, interparietal and basisphenoidal bones and restricted the rotation of the fronto-ethmo-facial complex. Alteration of the longitudinal growth rates of the dorsal and basilar components of the neurocranium and the splanchnocranium produced the persistence of the klinorynchal state.     

Early Lens Ablation Causes Dramatic Long-Term Effects on the Shape of Bones in the Craniofacial Skeleton of Astyanax mexicanus

The Mexican tetra, Astyanax mexicanus, exists as two morphs of a single species, a sighted surface morph and a blind cavefish. In addition to eye regression, cavefish have an increased number of taste buds, maxillary teeth and have an altered craniofacial skeleton compared to the sighted morph. We investigated the effect the lens has on the development of the surrounding skeleton, by ablating the lens at different time points during ontogeny. This unique long-term study sheds light on how early embryonic manipulations on the eye can affect the shape of the adult skull more than a year later, and the developmental window during which time these effects occur. The effects of lens ablation were analyzed by whole-mount bone staining, immunohistochemisty and landmark based morphometric analyzes. Our results indicate that lens ablation has the greatest impact on the skeleton when it is ablated at one day post fertilisation (dpf) compared to at four dpf. Morphometric analyzes indicate that there is a statistically significant difference in the shape of the supraorbital bone and suborbital bones four through six. These bones expand into the eye orbit exhibiting plasticity in their shape. Interestingly, the number of caudal teeth on the lower jaw is also affected by lens ablation. In contrast, the shape of the calvariae, the length of the mandible, and the number of mandibular taste buds are unaltered by lens removal. We demonstrate the plasticity of some craniofacial elements and the stability of others in the skull. Furthermore, this study highlights interactions present between sensory systems during early development and sheds light on the cavefish phenotype.     

The importance of craniofacial sutures in biomechanical finite element models of the domestic pig

Craniofacial sutures are a ubiquitous feature of the vertebrate skull. Previous experimental work has shown that bone strain magnitudes and orientations often vary when moving from one bone to another, across a craniofacial suture. This has led to the hypothesis that craniofacial sutures act to modify the strain environment of the skull, possibly as a mode of dissipating high stresses generated during feeding or impact. This study tests the hypothesis that the introduction of craniofacial sutures into finite element (FE) models of a modern domestic pig skull would improve model accuracy compared to a model without sutures. This allowed the mechanical effects of sutures to be assessed in isolation from other confounding variables. These models were also validated against strain gauge data collected from the same specimen ex vivo. The experimental strain data showed notable strain differences between adjacent bones, but this effect was generally not observed in either model. It was found that the inclusion of sutures in finite element models affected strain magnitudes, ratios, orientations and contour patterns, yet contrary to expectations, this did not improve the fit of the model to the experimental data, but resulted in a model that was less accurate. It is demonstrated that the presence or absence of sutures alone is not responsible for the inaccuracies in model strain, and is suggested that variations in local bone material properties, which were not accounted for by the FE models, could instead be responsible for the pattern of results.     

Growth of cranial synchondroses and sutures requires polycystin-1

In vertebrates, coordinated embryonic and postnatal growth of the craniofacial bones and the skull base is essential during the expansion of the rostrum and the brain. Identification of molecules that regulate skull growth is important for understanding the nature of craniofacial defects and for development of non-invasive biologically based diagnostics and therapies.Here we report on spatially restricted growth defects at the skull base and in craniofacial sutures of mice deficient for polycystin-1 (Pkd1). Mutant animals reveal a premature closure of both presphenoid and sphenooccipital synchondroses at the cranial base. Furthermore, knockout mice lacking Pkd1 in neural crest cells are characterized by impaired postnatal growth at the osteogenic fronts in craniofacial sutures that are subjected to tensile forces. Our data suggest that polycystin-1 is required for proliferation of subpopulations of cranial osteochondroprogenitor cells of both mesodermal and neural crest origin during skull growth. However, the Erk1/2 signalling pathway is up-regulated in the Pkd1-deficient skeletal tissue, similarly to that previously reported for polycystic kidney.     

In vivo impact of Dlx3 conditional inactivation in neural crest‐derived craniofacial bones

Mutations in DLX3 in humans lead to defects in craniofacial and appendicular bones, yet the in vivo activities related to Dlx3 function during normal skeletal development have not been fully elucidated. Here we used a conditional knockout approach to analyze the effects of neural crest deletion of Dlx3 on craniofacial bones development. At birth, mutant mice exhibit a normal overall positioning of the skull bones, but a change in the shape of the calvaria was observed. Molecular analysis of the genes affected in the frontal bones and mandibles from these mice identified several bone markers known to affect bone development, with a strong prediction for increased bone formation and mineralization in vivo. Interestingly, while a subset of these genes were similarly affected in frontal bones and mandibles (Sost, Mepe, Bglap, Alp, Ibsp, Agt), several genes, including Lect1 and Calca, were specifically affected in frontal bones. Consistent with these molecular alterations, cells isolated from the frontal bone of mutant mice exhibited increased differentiation and mineralization capacities ex vivo, supporting cell autonomous defects in neural crest cells. However, adult mutant animals exhibited decreased bone mineral density in both mandibles and calvaria, as well as a significant increase in bone porosity. Together, these observations suggest that mature osteoblasts in the adult respond to signals that regulate adult bone mass and remodeling. This study provides new downstream targets for Dlx3 in craniofacial bone, and gives additional evidence of the complex regulation of bone formation and homeostasis in the adult skeleton. J. Cell. Physiol. 228: 654–664, 2013. © 2012 Wiley Periodicals, Inc.     

The effect of rigid fixation on growth of the neurocranium

The effects on skull growth of plating the coronal suture and frontal bone were studied in New Zealand White rabbits. Three-dimensional coordinate landmarks were digitized and analyzed to determine the differences in form between operated and unoperated animals using Euclidian distance matrix analysis. This method compares sets of interlandmark distances in three dimensions and was used to demonstrate changes induced by plating. We interpret these changes in morphology to be the result of differences in growth between the operated and unoperated groups. Periosteal elevation alone (n = 6) resulted in a minimal local growth increase. Coronal suture plating (n = 8) resulted in local growth restriction with contralateral and adjacent size increases. Frontal bone plating (n = 6) without crossing a suture line also resulted in local growth restriction and adjacent bone size increases. The timing of intervention in relation to the completion of bone growth may explain the magnitude of clinically apparent effects. Changes in bones adjacent to those directly manipulated may be an attempt to maintain a normal skull volume.     

Bone structure and the patterns of force transmission in the cat skull (Felis catus)

Projection microradiography was used to determine the density and orientation of the force transmitting structures, i.e., trabeculae and bone lying between approximately parallel vascular canals, within the bones of cat skulls. The organisation in the skulls was confirmed statistically for a total of ten cats. The results of the observations showed that within specific areas of the skull a high degree of structural orientation and an increased density of osseous structures was present. The distribution of these characters corresponded in contiguous bones such that a continuum of structural organisation was established between the alveolar region and the site of attachment of the temporalis and masseter muscles and the glenoid region. The patterns of force transmission during jaw closure were determined when a resistance was placed initially between the canines and then the carnassials. An analysis was first carried out on dry skulls using colophonium resin to determine the direction of the force distribution. The nature and the approximate magnitude of the forces were ascertained by replacing the resin with strain gauges. The basic similarities in the strain patterns recorded from the dry skulls and those from the ten anaesthetised cats in which strain gauges had been intra-vitally implanted, substantiated the recordings made on the dry skulls. Combination of the results from the three sets of experiments defined the patterns of force distribution in the cat skull during the closure of the mandible against a resistance. The results showed that: (1) the combined action of the temporalis and masseter muscles tended to reduce the overall strain in the skull bones, and that the deformations produced by the action of the masseter were greater than that exerted by the temporalis muscles; (2) during biting, whether the resistance was placed between the canines or carnassials, compressive forces predominated in the facial bones; (3) small movements observed between facial bones indicated the presence of a flexible component within the skull, thus allowing large forces to be exerted during biting without overstressing the facial bones; (4) the glenoid fossa is part of a force bearing joint; (5) forces generated during biting were resisted within the skull by forces of an opposite nature generated within the system, the incompressible nature of bone and by the effect of the soft tissues; (6) the nature and the magnitude of the strain altered when a resistance was placed at the canines and then at the carnassials; however, the pattern of force distribution within the skull remained the same; (7) there was a direct correspondence between the detailed structural organisation of the bones and the patterns of force distribution. This conclusion would appear to apply in general to mammalian skulls. The study also emphasises the importance, neglected hitherto, of carrying out a variety of experiments to determine the patterns of force distribution in bones. The Trajectorial Theory of bone organisation is discussed and, on the basis of the results obtained, a modified theory is proposed. This states that: the structural continuum is common to the compact and cancellous bone and comprises bony bars which are aligned in the optimum direction for the transmission of force to a region in the bone or bones where it is effectively resisted.     

Cell lineage in mammalian craniofacial mesenchyme

We have analysed the contributions of neural crest and mesoderm to mammalian craniofacial mesenchyme and its derivatives by cell lineage tracing experiments in mouse embryos, using the permanent genetic markers Wnt1-cre for neural crest and Mesp1-cre for mesoderm, combined with the Rosa26 reporter. At the end of neural crest cell migration (E9.5) the two patterns are reciprocal, with a mutual boundary just posterior to the eye. Mesodermal cells expressing endothelial markers (angioblasts) are found not to respect this boundary; they are associated with the migrating neural crest from the 5-somite stage, and by E9.5 they form a pre-endothelial meshwork throughout the cranial mesenchyme. Mesodermal cells of the myogenic lineage also migrate with neural crest cells, as the branchial arches form. By E17.5 the neural crest-mesoderm boundary in the subectodermal mesenchyme becomes out of register with that of the underlying skeletogenic layer, which is between the frontal and parietal bones. At E13.5 the primordia of these bones lie basolateral to the brain, extending towards the vertex of the skull during the following 4-5 days. We used DiI labelling of the bone primordia in ex-utero E13.5 embryos to distinguish between two possibilities for the origin of the frontal and parietal bones: (1) recruitment from adjacent connective tissue or (2) proliferation of the original primordia. The results clearly demonstrated that the bone primordia extend vertically by intrinsic growth, without detectable recruitment of adjacent mesenchymal cells.     

Influence of food restriction during gestation on craniofacial growth of the weanling rat

Holtzman rats were subjected to food restriction during gestation or lactation, or both periods (overall stress). At weaning, male pup skulls were measured and female brains and cranial masticatory muscles were weighed and a neuromuscular index was calculated. It was found that gestational protein-calorie malnutrition (PCM) without suckling restoration accounted for about 30% of the growth delay observed under overall stress. That effect disappeared after a normal suckling restoration. Under the same conditions of maternal food restriction in both periods, growth delay in the offspring was greater during lactation than gestation. As in lactation, craniofacial changes during gestational restriction were due to an adjustive response of bone growth to PCM. This response seemed to accrue from an altered relationship between the growth of the brain-less sensitive and highly restorable-and the growth of the masticatory muscles-more sensitive and less restorable. Some degree of delay in orthocephalization would be the skeletal outcome of such adjustive neuromuscular response.     

Autoradiographic localization of osteogenin binding sites in cartilage and bone during rat embryonic development

Osteogenin, a novel bone differentiation factor isolated from bone, has been recently purified and the amino acid sequence determined. Osteogenin in conjunction with a collagenous bone matrix substratum induces cartilage and bone formation in vivo. In order to understand the developmental role of osteogenin during cartilage and bone morphogenesis we examined the binding and distribution of iodinated osteogenin in developing rat embryos. Whole embryo tissue sections were made from 11, 12, 13, 15, 18, and 20 day fetuses. The specific binding of osteogenin at different stages of rat embryonic development was determined by autoradiography. Maximal binding was observed in mesodermal tissues such as cartilage, bone, perichondrium, and periosteum. During Days 11-15, peak binding was localized to perichondrium during limb and vertebral morphogenesis. By Day 18 periosteum exhibited the highest concentration of autoradiographic grains. Osteogenin was also localized in developing membranous bones of the calvarium and other craniofacial bones. Considerably less binding was observed, in decreasing order, in muscle, liver, spleen, skin, brain, heart, kidney, and intestine. The observed maximal binding during skeletal morphogenesis implies a developmental role for osteogenin.     

Structural Constraints in the Evolution of the Tetrapod Skull Complexity: Williston’s Law Revisited Using Network Models

Ever since the appearance of the first land vertebrates, the skull has undergone a simplification by loss and fusion of bones in all major groups. This well-documented evolutionary trend is known as “Williston’s Law”. Both loss and fusion of bones are developmental events that generate, at large evolutionary scales, a net reduction in the number of skull bones. We reassess this evolutionary trend by analyzing the patterns of skull organization captured in network models in which nodes represent bones and links represent suture joints. We also evaluate the compensatory process of anisomerism (bone specialization) suggested to occur as a result of this reduction by quantifying the heterogeneity and the ratio of unpaired bones in real skulls. Finally, we perform simulations to test the differential effect of bone losses in skull evolution. We show that the reduction in bone number during evolution is accompanied by a trend toward a more complex organization, rather than toward simplification. Our results indicate that the processes by which bones are lost or fused during development are central to explain the evolution of the morphology of the skull. Our simulations suggest that the evolutionary trend of increasing morphological complexity can be caused as a result of a structural constraint, the systematic loss of less connected bones during development.     

Embryonic development of Python sebae - I: Staging criteria and macroscopic skeletal morphogenesis of the head and limbs

This study explores the post-ovipositional craniofacial development of the African Rock Python (Python sebae). We first describe a staging system based on external characteristics and next use whole-mount skeletal staining supplemented with Computed tomography (CT) scanning to examine skeletal development. Our results show that python embryos are in early stages of organogenesis at the time of laying, with separate facial prominences and pharyngeal clefts still visible. Limb buds are also visible. By 11 days (stage 3), the chondrocranium is nearly fully formed; however, few intramembranous bones can be detected. One week later (stage 4), many of the intramembranous upper and lower jaw bones are visible but the calvaria are not present. Skeletal elements in the limbs also begin to form. Between stages 4 (day 18) and 7 (day 44), the complete set of intramembranous bones in the jaws and calvaria develops. Hindlimb development does not progress beyond stage 6 (33 days) and remains rudimentary throughout adult life. In contrast to other reptiles, there are two rows of teeth in the upper jaw. The outer tooth row is attached to the maxillary and premaxillary bones, whereas the inner row is attached to the pterygoid and palatine bones. Erupted teeth can be seen in whole-mount stage 10 specimens and are present in an unerupted, mineralized state at stage 7. Micro-CT analysis reveals that all the young membranous bones can be recognized even out of the context of the skull. These data demonstrate intrinsic patterning of the intramembranous bones, even though they form without a cartilaginous template. In addition, intramembranous bone morphology is established prior to muscle function, which can influence bone shape through differential force application. After careful staging, we conclude that python skeletal development occurs slowly enough to observe in good detail the early stages of craniofacial skeletogenesis. Thus, reptilian animal models will offer unique opportunities for understanding the early influences that contribute to perinatal bone shape.     

Skeletogenic Fate of Zebrafish Cranial and Trunk Neural Crest

The neural crest (NC) is a major contributor to the vertebrate craniofacial skeleton, detailed in model organisms through embryological and genetic approaches, most notably in chick and mouse. Despite many similarities between these rather distant species, there are also distinct differences in the contribution of the NC, particularly to the calvariae of the skull. Lack of information about other vertebrate groups precludes an understanding of the evolutionary significance of these differences. Study of zebrafish craniofacial development has contributed substantially to understanding of cartilage and bone formation in teleosts, but there is currently little information on NC contribution to the zebrafish skeleton. Here, we employ a two–transgene system based on Cre recombinase to genetically label NC in the zebrafish. We demonstrate NC contribution to cells in the cranial ganglia and peripheral nervous system known to be NC–derived, as well as to a subset of myocardial cells. The indelible labeling also enables us to determine NC contribution to late–forming bones, including the calvariae. We confirm suspected NC origin of cartilage and bones of the viscerocranium, including cartilages such as the hyosymplectic and its replacement bones (hymandibula and symplectic) and membranous bones such as the opercle. The cleithrum develops at the border of NC and mesoderm, and as an ancestral component of the pectoral girdle was predicted to be a hybrid bone composed of both NC and mesoderm tissues. However, we find no evidence of a NC contribution to the cleithrum. Similarly, in the vault of the skull, the parietal bones and the caudal portion of the frontal bones show no evidence of NC contribution. We also determine a NC origin for caudal fin lepidotrichia; the presumption is that these are derived from trunk NC, demonstrating that these cells have the ability to form bone during normal vertebrate development.     

A tale of two cities: The genetic mechanisms governing calvarial bone development

The skull bones must grow in a coordinated, three‐dimensional manner to coalesce and form the head and face. Mammalian skull bones have a dual embryonic origin from cranial neural crest cells (CNCC) and paraxial mesoderm (PM) and ossify through intramembranous ossification. The calvarial bones, the bones of the cranium which cover the brain, are derived from the supraorbital arch (SOA) region mesenchyme. The SOA is the site of frontal and parietal bone morphogenesis and primary center of ossification. The objective of this review is to frame our current in vivo understanding of the morphogenesis of the calvarial bones and the gene networks regulating calvarial bone initiation in the SOA mesenchyme.     

The fate of the arachnoid villi in humans

Villi arachnoidales undergoes in the course of life changes in relation to the skull bones and sinuses. Our aim was to determine the relations of the villi arachnoidales to the skull bone and/or sinuses from the neonatal period to adults. The investigations were performed on collection of 50 disarticulated macerated skull bones from the new-born to 30 years of age and on 20 skulls from individuals in the life period from 30 to 80 years of age. Villi arachnoidales produced imprints on the skull bones in the shape of holes and/or furrows corresponding to different shape of the villi arachnoidales. These imprints appeared very early in the period when the bony sprouts of the large skull bones received a thin covering of compact bone, the future lamina vitrea. At that time villi arachnoidales had no connection with the dural sinuses but with the diploe and with the diploic veins. By agglomeration of the villi in larger and large formations, granula meningea, Pacchionian granulations, the contact to sinuses was realized by means of short channels. The structural changes of villi arachnoidales may produce thrombophlebitis and hydrocephalus externus, especially in children. The fate and the relations of the villi arachnoidales are therefore of great importance for neurologist, neurosurgeon and otorhinolaryngologist.     

Development and evolution of craniofacial patterning is mediated by eye-dependent and -independent processes in the cavefish Astyanax

We studied the development and evolution of craniofacial features in the teleost fish, Astyanax mexicanus. This species has an eyed surface dwelling form (surface fish) and many different cave dwelling forms (cavefish) with various degrees of reduced eyes and pigmentation. The craniofacial features we examined are the tooth-bearing maxillary bones, the nasal and antorbital bones, the circumorbital bones, and the opercular bones, all of which show evolutionary modifications in different cavefish populations. Manipulations of eye formation by transplantation of the embryonic lens, by lentectomy, or by removing the optic vesicle showed that eye-dependent and -independent processes change both the surface fish and cavefish craniofacial skeletons. The size of the olfactory pits, which the nasal and antorbital bones define, and the size and positioning of the circumorbital bones were found to correlate with eye development. For the six suborbital bones (SO1-6), the relationship with the developing eye appears to be due to ossification initiated from foci in the suborbital canal of cranial neuromasts, whose patterning is also highly correlated with the presence or absence of an eye. By contrast, we found that the number of maxillary teeth, the number of SO3 bone elements, the positioning of SO4-6 with respect to the opercular bone, and the shape of the opercular bone are not dependent on eye formation and vary among different cavefish populations. The results suggest that evolution of the cavefish craniofacial skeleton is controlled by multiple developmental events, some a direct consequence of eye degeneration and others unrelated to loss of the eye.     

Strain in the braincase and its sutures during function

The skull is distinguished from other parts of the skeleton by its composite construction. The sutures between bony elements provide for interstitial growth of the cranium, but at the same time they alter the transmission of stress and strain through the skull. Strain gages were bonded to the frontal and parietal bones of miniature pigs and across the interfrontal, interparietal and coronal sutures. Strains were recorded 1) during natural mastication in conjunction with electromyographic activity from the jaw muscles and 2) during stimulation of various cranial muscles in anesthetized animals. Vault sutures exhibited vastly higher strains than did the adjoining bones. Further, bone strain primarily reflected torsion of the braincase set up by asymmetrical muscle contraction; the tensile axis alternated between +45 degrees and -45 degrees depending on which diagonal masseter/temporalis pair was most active. However, suture strains were not related to overall torsion but instead were responses to local muscle actions. Only the coronal suture showed significant strain (tension) during jaw opening; this was caused by the contraction of neck muscles. All sutures showed strain during jaw closing, but polarity depended on the pattern of muscle usage. For example, masseter contraction tensed the coronal suture and the anterior part of the interfrontal suture, whereas the temporalis caused compression in these locations. Peak tensile strains were larger than peak compressive strains. Histology suggested that the skull is bent at the sutures, with the ectocranial surface tensed and the endocranial surface predominantly compressed. Collectively, these results indicate that skulls with patent sutures should be analyzed as complexes of independent parts rather than solid structures.