Surface-enhanced Raman and steady fluorescence study of interaction between antitumoral drug 9-aminoacridine and trypsin-like protease related to metastasis processes, guanidinobenzoatase

Fluorescence spectroscopy and surface-enhanced Raman spectroscopy (SERS) were applied to study the interaction of the antitumoral drug 9-aminoacridine (9AA) with a trypsin-like protease guanidinobenzoatase (GB) extracted from a mouse Erlich tumor. As a consequence of this interaction, a strong 9AA exciplex emission was detected in the emission fluorescence spectra at certain drug and enzyme concentrations. A SERS study was accomplished on silver colloids at several excitation wavelengths in order to obtain more information about the interaction mechanism. The results derived from Raman spectroscopy indicated that 9AA in the amino monomeric form may interact with the enzyme by means of two different bonds: an ionic bond with a negatively charged amino acid and a ring stacking interaction with an aromatic residue placed in the catalytic site of GB. This interaction mechanism was responsible for a strong exciplex emission detected at a longer wavelength than the expected value of the normal fluorescence emission. Moreover, the GB concentration dependence of the interaction suggested that the drug was sensitive to the quaternary structure of the enzyme.     

Interaction of the antitumor drug 9-aminoacridine with guanidinobenzoatase studied by spectroscopic methods: a possible tumor marker probe based on the fluorescence exciplex emission

Fluorescence spectroscopy, surface-enhanced Raman spectroscopy (SERS), and analytical centrifugation are applied in this work to study the interaction of the antitumor drug 9-aminoacridine (9AA) with a trypsin-like protease, guanidinobenzoatase (GB), extracted from an Erlich tumor. As a consequence of this interaction, a strong 9AA exciplex emission can be detected at a certain drug and enzyme concentration. The 9AA exciplex emission was also studied for 9AA interacting with others serin proteases: alpha-chymotrypsin, trypsin, and penicillin G-acylase (PGA), as well as with bovine serum albumin (BSA) in order to obtain information about the active center of GB. We have found that the exciplex 9AA emission may be induced by a ring-stacking interaction between the monomeric drug, under the amino form, and an aromatic residue placed in the catalytic site of the protein. The results derived from Raman spectroscopy corroborate this interaction mechanism, as demonstrated by the existence of typical protonated amino 9AA marker bands as well as an important modification of the ring vibrations, thus indicating the existence of an interaction through ring stacking. The analytical centrifugation technique was applied to study the GB association in aqueous solution, demonstrating that the 9AA/GB interaction depends on the enzyme quaternary structure. An interaction of 9AA with an associate form of GB, which may be the actual enzyme active form, is suggested.     

Interaction of Fibrinogen with Dextran Sulfate

Interactions of fibrinogen with dextran sulfate, dextran, and carboxymethyl cellulose were investigated by turbidity measurement, chemical analysis, and electrophoresis. Dextran sulfate and fibrinogen combined even in the physiological pH region where both of them have negative net charges, and formed a precipitate and soluble complex. Since no complex formation was observed in the case of dextran, it seems that the electrostatic force plays a part in complex formation. However, sodium carboxymethyl cellulose which carries -COO^- groups did not combine with fibrinogen. Therefore, it is considered that there is a specificity for the interaction among ionized groups. Further, temperature and molecular size of dextran sulfate influenced the interaction to a large extent. It is concluded from these facts that other intermolecular binding forces should be taken into consideration in addition to the electrostatic force.     

Lipid-DNA and lipid-polyelectrolyte mesophases: structure and exchange kinetics.

Cationic lipid-DNA complexes are used as gene transfer vehicles in molecular biology and potentially in human gene therapy. In recent synchrotron X-ray scattering studies the molecular structure of such self-assembling aggregates was elucidated. A rich polymorphism of lamellar, hexagonal, lamellar-columnar and micellar mesophases was found. In this article we describe composite phases of cationic lipid mixed with hyaluronic acid and dextran sulfate which likewise form intercalated lamellar complexes. Heterogeneous phases of lipid/dextran sulfate mixed with lipid/DNA exhibit macroscopic phase separation. When dextran sulfate is added to preformed cationic lipid DNA complexes the latter are dissolved in favor of the lipid-polyelectrolyte phases. We investigated the kinetics of the DNA replacement by dextran sulfate. The experiments are intended to mimic the interaction of cationic lipid gene delivery complexes with highly charged extracellular matrix components.     

How does dextran sulfate prevent heat induced aggregation of protein? The mechanism and its limitation as aggregation inhibitor

The effect of dextran sulfate on protein aggregation was investigated to provide the clues of its biochemical mechanism. The interaction between dextran sulfate and BSA varied with the pH values of the solution, which led to the different extent of aggregation prevention by dextran sulfate. Light scattering data with thermal scan showed that dextran sulfate suppressed BSA aggregation at pH 5.1 and pH 6.2, while it had no effect at pH 7.5. Isothermal titration calorimetric analysis suggested that the pH dependency of the role of dextran sulfate on BSA aggregation would be related to the difference in the mode of BSA-dextran sulfate complex formation. Isothermal titration calorimetric analysis at pH 6.2 indicated that dextran sulfate did not bind to native BSA at this pH, but interacted with partially unfolded BSA. While stabilizing native form of protein by the complex formation has been suggested as the suitable mechanism of preventing aggregation, our observation of conformational changes by circular dichroism spectroscopy showed that strong electrostatic interaction between dextran sulfate and BSA rather facilitated the denaturation of BSA. Combining the data from isothermal titration calorimetry, circular dichroism, and dynamic light scattering, we found that the complex formation of the intermediate state of denatured BSA with dextran sulfate is a prerequisite to suppress the aggregation by preventing further oligomerization/aggregation process of denatured protein.     

Conformations and interactions of excited states. II. Polystyrene, polypeptides, and proteins

Previous fluorescence and phosphorescence studies of aromatic model compounds have been extended to polymers: “atactic” and isotactic polystyrene, seven aromatic poly-(amino acids), and two proteins. We have confirmed previous observations that both forms of polystyrene exhibit strong excimer fluorescence emission at room temperature but not at 77°K. Of the poly(amino acids) (all observed in helix-supporting solvents), poly-L -phenylalanine, poly(α-benzyl-L -aspartic acid), and poly-1-benzyl-L -histidine likewise show excimer emission at room temperature but not at 77°K., while poly-L -tyrosine, poly-L -tryptophan, poly(γ-benzyl-L -glutamic acid), and poly-S-benzyl-L -cysteine exhibit no excimer emission at either temperature. The aromatic residues of bovine serum albumin exhibit only “normal” fluorescence, but, lysozyme appears to be unique among proteins in showing excimer-like tryptophan emission in the native state; its luminescence becomes “normal” upon denaturation. It appears very probable that none of these polymers has a ground-state conformation in which the aromatic groups have face-to-face orientations appropriate for excimer interaction. It is concluded that at room temperature absorption of light can cause local “melting” of regular (usually helical) structures and thus, in some polymers, permit the attainment of a face-to-face arrangement of aromatic rings within the radiative lifetime of their excited singlet states. In certain other polymers (for reasons not clear at present), and in all polymers at 77°K., this does not occur. This concept is extended to provide a bettor basis for understanding the mechanism of formation of the photodimer of thy mine in irradiated DNA.     

Local anesthetic-induced microscopic and mesoscopic effects in micelles. A fluorescence,spin label and SAXS study

The interaction of the local anesthetic tetracaine (TTC) with anionic sodium lauryl sulfate (SLS) and zwitterionic 3-(N-hexadecyl-N,N-dimethylammonio)propanesulfonate (HPS) micelles was investigated by fluorescence, spin labeling EPR and small angle X-ray scattering (SAXS). Fluorescence pH titrations allowed the choice of adequate pHs for the EPR and SAXS experiments, where either charged or uncharged TTC would be present. The data also indicated that the anesthetic is located in a less polar environment than its charged counterpart in both micellar systems. EPR spectra evidenced that both anesthetic forms increased molecular organization within the SLS micelle, the cationic form exerting a more pronounced effect. The SAXS data showed that protonated TTC causes an increase in the SLS polar shell thickness, hydration number, and aggregation number, whereas the micellar features are not altered upon incorporation of the uncharged drug. The combined results suggest that the electrostatic interaction between charged TTC and SLS, and the intercalation of the drug in the micellar polar region induce a change in molecular packing with a decrease in the mean cross-sectional area, not observed when the neutral drug sinks more deeply into the micellar hydrophobic domain. In the case of HPS micelles, the EPR spectral changes were small for the charged anesthetic and the SAXS data did not evidence any change in micellar structure, suggesting that this species protrudes more into the aqueous phase due to the lack of electrostatic attractive forces in this system.     

Effect of Polyelectrolytes on Catalytic Activity of Alcohol Dehydrogenase

Fluorescent and optical spectroscopy were used to study the interaction of alcohol dehydrogenase (ADH) with negatively charged polystyrene sulfonate (PSS) and dextran sulfate (DS), as well as positively charged poly(diallyldimethylammonium) (PDADMA). As found, DS and PDADMA did not affect the structural and catalytic enzyme properties. In contrast, PSS slightly decreased the protein self-fluorescence over 1 h of incubation, which is associated with partial destruction of its quaternary (globular) structure. Investigation of the ADH activity with and without PSS showed its dependency on the incubation time and the PSS presence. Sodium chloride (2.0 and 0.2 M) or ammonium sulfate (0.1 M) added to the reaction mixture did not completely protect the enzyme quaternary structure from the PSS action. However ammonium sulfate or 0.2 M sodium chloride stabilized the enzyme and partially inhibited the negative PSS effect.     

High‐throughput ion exchange purification of positively charged recombinant protein in the presence of negatively charged dextran sulfate

Product quality analyses are critical for developing cell line and bioprocess producing therapeutic proteins with desired critical product quality attributes. To facilitate these analyses, a high‐throughput small‐scale protein purification (SSP) is required to quickly purify many samples in parallel. Here we develop an SSP using ion exchange resins to purify a positively charged recombinant growth factor P1 in the presence of negatively charged dextran sulfate supplemented to improve the cell culture performance. The major challenge in this work is that the strong ionic interaction between P1 and dextran sulfate disrupts interaction between P1 and chromatography resins. To solve this problem, we develop a two‐step SSP using Q Sepharose Fast Flow (QFF) and SP Sepharose XL (SPXL) resins to purify P1. The overall yield of this two‐step SSP is 78%. Moreover, the SSP does not affect the critical product quality attributes. The SSP was critical for developing the cell line and process producing P1. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:516–520, 2014     

RhoA-derived peptide dimers share mechanistic properties with other polyanionic inhibitors of respiratory syncytial virus (RSV), including disruption of viral attachment and dependence on RSV G

Large polyanionic molecules, such as sulfated polysaccharides (including soluble heparin and dextran sulfate), synthetic polyanionic polymers, and negatively charged proteins, have been shown to broadly inhibit several enveloped viruses. We recently reported the antiviral activity of a peptide derived from amino acids 77 to 95 of a potential binding partner of respiratory syncytial virus F protein (RSV F), the GTPase RhoA. A subsequent study with a truncated peptide (amino acids 80 to 94) revealed that optimal antiviral activity required dimerization via intermolecular disulfide bonds. We report here that the net negative charge of this peptide is also a determining factor for its antiviral activity and that it, like other polyanions, inhibits virus attachment. In a flow cytometry-based binding assay, peptide 80-94, heparin, and dextran sulfate inhibited the attachment of virus to cells at 4 degrees C at the same effective concentrations at which they prevent viral infectivity. Interestingly, time-of-addition experiments revealed that peptide 80-94 and soluble heparin were also able to inhibit the infectivity of a virus that had been prebound to cells at 4 degrees C, as had previously been shown for dextran sulfate, suggesting a potential role for postattachment effects of polyanions on RSV entry. Neutralization experiments with recombinant viruses showed that the antiviral activities of peptide 80-94 and dextran sulfate were diminished in the absence of the RSV attachment glycoprotein (G). Taken together, these data indicate that the antiviral activity of RhoA-derived peptides is functionally similar to that of other polyanions, is dependent on RSV G, and does not specifically relate to a protein-protein interaction between F and RhoA.     

Effect of oppositely charged polymer and dissolution medium on swelling, erosion, and drug release from chitosan matrices

The purpose of this research was to investigate the potential use of anionick-carrageenan and nonionic hydroxypropyl-methylcellulose (HPMC, K4) to improve the matrix integrity of directly compressed chitosan tablets containing naproxen sodium, an anionic drug. The influence of buffer pH and drug:polymer ratio on the water uptake, matrix erosion, and drug release were studied. The rapid release of naproxen sodium was seen from matrices containing 100% chitosan due to loss in the matrix cohesiveness; whereas, it was relatively slow for matrices containing optimum concentration ofk-carrageenan. In-situ interaction between oppositely charged moieties resulted in the formation of polyelectrolyte complexes with stoichiometric charge ratios of unity. Fourier transform in frared (FTIR) spectroscopy and powder x-ray diffraction (PXRD) data confirmed the importance of ionic bonds in polyelectrolyte complexation. The ionic interactions between polymers were absent in matrices containing HPMC and the integrity of tablets was improved owing to the presence of viscous gel barrier. The reasons for retarded release of naproxen sodium from the chitosan matrices at different pH include poor aqueous solubility of drug, the formation of a rate-limiting polymer gel barrier along the periphery of matrices, the interaction of naproxen sodium with protonated amino, groups of chitosan, and the interaction of ionized amino groups of chitosan with ionized sulfate groups ofk-carrageenan. Published: June 15, 2007     

Preparation of solid dispersions of nonsteroidal anti-inflammatory drugs with acrylic polymers and studies on mechanisms of drug-polymer interactions

This work studied the mechanisms of interaction between Eudragit RS100 (RS) and RL100 (RL) polymers with 3 nonsteroidal anti-inflammatory drugs: diflunisal (DIF), flurbiprofen (FLU), and piroxicam (PIR). Solid dispersions of polymers and drugs at different weight ratios were prepared by coevaporation of their ethanol solutions. The resulting coevaporates were characterized in the solid state (Fourier-transformed infrared spectroscopy (FT-IR) IR, differential scanning calorimetry, powder-x-ray diffractometry) as well as by studying the in vitro drug release in a gastroenteric environment. Absorption tests from drug solutions to the solid polymers were also performed to better explain the mechanism of interactions between them. The preparative conditions did not induce changes in the crystalline state of the drugs (amorphization or polymorphic change). Drugs strongly interacted with the ammonium groups present in polymers, giving an electrostatic interaction that reinforced the mere physical dispersion of drug molecules within polymer networks. Such interactions are related to the chemical structure of the drugs and to their dissociated or undissociated state. The dispersion of drugs in the polymer matrices strongly influenced their dissolution rate, which appeared slower and more gradual than those of the pure drugs, when polymer ratios were increased. RL coevaporates usually displayed higher dissolution rates. The kinetic evaluation of the dissolution profile, however, suggested that both the drug solubility in the external medium and its diffusion capacity within the polymer network are involved. In the sorption experiments, RL showed a greater adsorptive capacity than RS, in relation to the greater number of quaternary ammonium functions, which behave as activity sites for the electrostatic interactions. In the presence of Tris-HCl buffer (pH 7.4), drug adsorption was reduced, as a consequence of the competition of the chloride ions with drug anions for the polymer binding sites. In general, DIF and FLU displayed a similar interaction with RS and RL active sites; PIR's was different. The different molecular structures of these agents can justify such findings. The presence of a carboxyl group (instead of another dissociable acidic moiety, like the hydroxy-enolic one in the PIR molecule) could help explain the strong interaction with RS and RL polymers' quaternary ammonium centers. Preliminary studies like ours are important in helping develop better forecasting and increasing the understanding of the incorporation/release behavior of drugs from particulate delivery systems that can be made from these polymers.     

Binding of octa-plus porphyrazines to DNA

We present a preliminary report of the interaction of octacationic N-methyl-pyridyl metalloporphyrazines, M=Cu(II) (Cupz⁺⁸) and Zn(II) (Znpz⁺⁸), with calf thymus DNA. These were monitored by electronic absorption spectroscopy, and in the case of Znpz⁺⁸, also by emission spectroscopy. These studies show that both the Cupz⁺⁸ and Znpz⁺⁸ interact strongly with DNA, and at sufficient concentrations induce a highly colored precipitate. The spectrum of Cupz⁺⁸ red-shifts as DNA is added, which is interpreted as indicative of π stacking of the charged macrocycle as it binds electrostatically to the outside of the DNA duplex. The spectrum of Znpz⁺⁸ does not shift, indicative of simple electrostatic surface binding. The absence of stacking may be related to the presence of an axial metal-ion ligand for Znpz⁺⁸, presumably 1120, while the metal ion of Cupz⁺⁸ is four-coordinate.     

Regulation of polyamine-responsive protein kinase by certain highly specific polyamines and charged carbohydrates

Polyamine-responsive protein kinase, a cyclic nucleotide-independent protein kinase from the cytosol of Morris hepatoma 3924A, was stimulated 8–9 fold by several different polymers of polylysine, polyornithine and random copolymers of lysine-alanine; spermidine; spermine, and mixture of spermine and spermidine stimulated 2, 3, and 5 fold, respectively. The protein kinase was not stimulated by poly-carboxybenzyl-lysine, random copolymer of lysine-tyrosine, polyhistidine, polymethionine, polyglutamic acid, polyaspartic acid, dipeptide (Lys-Lys), lysine, ornithine, and putresine. The polyamine stimulation of the protein kinase was prevented by certain specific charged carbohydrated: heparin, chondroitin sulfates A, B, and C, dextran sulfate and hyaluronic acid. It was not prevented by noncharged carbohydrates: dextran, glycogen, starch, sucrose, etc; or by sulfate salts: ammonium sulfate, potassium sulfate, sodium thiosulfate, etc. The inhibition was reversed by increased polylysine. Heparin was non-competitive inhibitor of Mg²⁺--ATP. It would appear that this enzyme is regulated by certain highly specific molecules with certain sizes and charges; plus charge is stimulatory, negative charge prevents the stimulation.     

Efficient DNA interrogation of SpCas9 governed by its electrostatic interaction with DNA beyond the PAM and protospacer

Streptococcus pyogenes Cas9 (SpCas9), a programmable RNA-guided DNA endonuclease, has been widely repurposed for biological and medical applications. Critical interactions between SpCas9 and DNA confer the high specificity of the enzyme in genome engineering. Here, we unveil that an essential SpCas9–DNA interaction located beyond the protospacer adjacent motif (PAM) is realized through electrostatic forces between four positively charged lysines among SpCas9 residues 1151–1156 and the negatively charged DNA backbone. Modulating this interaction by substituting lysines with amino acids that have distinct charges revealed a strong dependence of DNA target binding and cleavage activities of SpCas9 on the charge. Moreover, the SpCas9 mutants show markedly distinguishable DNA interaction sites beyond the PAM compared with wild-type SpCas9. Functionally, this interaction governs DNA sampling and participates in protospacer DNA unwinding during DNA interrogation. Overall, a mechanistic and functional understanding of this vital interaction explains how SpCas9 carries out efficient DNA interrogation.     

A new method for the generation of patterned protein films by encapsulation in arrays of thermally evaporated lipids

In this article we demonstrate a versatile method for the generation of patterned protein films by encapsulation in arrays of the lipids, octadecylamine (ODA, cationic), and arachidic acid (AA, anionic). A simple 2 x 2 array of ODA and AA was vacuum deposited on different substrates using appropriate masks. Thereafter, the enzymes pepsin and fungal protease as well as the heme-proteins cytochrome c and hemoglobin were encapsulated in the different elements of the array by sequential immersion (combined with judicious masking) of the array elements in the different protein solutions. The proteins are incorporated into the lipid elements by electrostatic interaction between charged amino acid residues on the protein surface and charged functional groups in the lipid matrix. This procedure leads to spatially distinct regions of the different proteins on one substrate and shows promise for single-chip multianalyte immunoassay/multiplex, high-throughput biosensor and catalysis applications. Fourier transform infrared spectroscopy (FTIR) was used to monitor the incorporation of the proteins in the different elements of the array as well as to ascertain whether intermixing of the proteins in a particular array element had occurred. The heme-protein composite regions were further characterized using UV-VIS spectroscopy.     

New Insights into the Translocation Route of Enrofloxacin and Its Metalloantibiotics

Probing drug/lipid interactions at the molecular level represents an important challenge in pharmaceutical research, drug discovery and membrane biophysics. Previous studies showed that enrofloxacin metalloantibiotic has potential as an antimicrobial agent candidate, since it exhibits antimicrobial effect comparable to that of free enrofloxacin but a different translocation route. These differences in uptake mechanism can be paramount in counteracting bacterial resistance. In view of lipids role in bacterial drug uptake, the interaction of these compounds with different Escherichia coli model membranes were studied by fluorescence spectroscopy. Partition coefficients determined showed that lipid/antibiotic interactions were sensitive to liposomes composition and that the metalloantibiotic had a higher partition than free enrofloxacin. These results corroborate the different mechanism of entry proposed and can be rationalized on the basis that an electrostatic interaction between the metalloantibiotic positively charged species, present at physiological pH, and the lipids negatively charged head groups clearly promotes the lipid/antimicrobial association.     

A novel aldehyde dextran sulfonate matrix for affinity biosensors

Aldehyde dextran sulfonate (ADS), a modified oligosaccharide polymer, was used to prepare a new matrix structure for affinity biosensors. The principal difference between the ADS matrix and similar structures developed previously results from presence of two active functional groups in the matrix, namely, aldehyde and sulfonate. These groups perform two different functions in the matrix. The aldehyde group is responsible for covalent bonding in the biomaterials, and the negatively charged sulfonate group provides electrostatic attraction of the positively charged biomolecules. By varying the ratio between the aldehyde and sulfonate groups in the matrix, one can control contributions from the two binding modes (covalent and electrostatic). A number of oligosaccharides, such as simple dextran, aldehyde dextran (AD), aldehyde dextran sulfonate (ADS) and aldehyde ethylcellulose (AEC), were used for preparation of matrix structures. The properties of the obtained matrices were analysed and compared. Surface plasmon resonance (SPR) was used as the main technique to characterize the matrix structures.     

Genetically engineered charge modifications to enhance protein separation in aqueous two-phase systems: Charge directed partitioning

This report continues or examination of the effect of genetically engineered charge modifications on the partitioning behavior of proteins in aqueous two-phase extration. The genetic modifications consisted of the fusion of charged peptide tails to beta-galactosidase and charge-change point mutations to T4 lysozyme. Our previous article examined the influence of these charge modifications on partitioning as a function of interfacial potential difference. In this study, we examined charge directed partitioning behavior in PEG/dextran systems containing small amounts of the charged polymers diethylaminoethyl-dextran (DEAE-dextran) or dextran sulfate. The best results were obtained when attractive forces between the protein and polymer were present. Nearly 100% of the beta-galactosidase, which carries a net negative charge, partitioned to the DEAE-dextran-rich phase regardless of whether the phase was dextran or PEG. In these cases, cloudiness of the protein-rich phases suggest that strong charge interactions resulted in protein/polymer aggregation, which may have contributed to the extreme partitioning. Unlike the potentialdriven partitioning reported previously, consistent partitioning trends were observed as a result of the fusion tails, with observed shifts in partition coefficient (K(p)) of up to 37-fold. However, these changes could not be solely attributed to charge-based interactions. Similarly, T4 lysozyme, carrying a net positive charge, partitioned to the dextran sulfate-containing phase, and displayed four- to sevenfold shifts in K(p) as a result of the point mutations. These shifts were two to four times stronger than those observed for potential driven partitioning. Little effect on partitioning was observed when the protein and polymer had the same charge, with the exception of beta-galactosidase with polyarginine tails. The high positive charge density of these tails provided for a localized interaction with the dextran sulfate, and resulted in 2- to 15-fold shifts in K(p). (c) 1995 John Wiley & Sons, Inc.     

II. Electrostatic effect in the aggregation of heat-denatured RNase A and implications for protein additive design

In the previous study (part I), heat-denatured RNase A aggregation was shown to depend on the solution pH. Interestingly, at pH 3.0, the protein did not aggregate even when exposed to 75 degrees C for 24 h. In this study, electrostatic repulsion was shown to be responsible for the absence of aggregates at that pH. While RNase A aggregation was prevented at the extremely acidic pH, this is not an environment conducive to maintaining protein function in general. Therefore, attempts were made to confer electrostatic repulsion near neutral pH. In this study, heat-denatured RNase A was mixed with charged polymers at pH 7.8 in an attempt to provide the protein with excess surface cations or anions. At 75 degrees C, SDS and dextran sulfate were successful in preventing RNase A aggregation, whereas their cationic, nonionic, and zwitterionic analogs did not do so. We believe that the SO3- groups present in both additives transformed the protein into polyanionic species, and this may have provided a sufficient level of electrostatic repulsion at pH 7.8 and 75 degrees C to prevent aggregation from proceeding.