Removal of heavy metals from stainless steel effluents by waste biomass from Brazilian alcoholic beverage production

The capacity of waste biomasses from sugar-cane aguardente, a traditional Brazilian spirit, for metal biosorption was assessed. Free biomass and biomass immobilized onto chitin and Dowex (ion-exchange resin) were utilized to remove chromium, iron and nickel from both synthetic solutions and stainless steel effluents. The best performance in terms of metal sorbed was observed in with free biomass, with the following adsorption capacity: 70% chromium, 50% iron and 20% nickel at pH 4.0.     

Removal of heavy metals from aqueous solution using Rhizopus delemar mycelia in free and polyurethane-bound form

This study assesses the ability of mycelia of Rhizopus delemar (both free and immobilized on polyurethane foam) to remove heavy metals from single-ion solutions as well as from a mixture of them. All experiments were conducted using 0.5-5 mm solutions of CuSO4 x 5H2O, CoCl2-6H2O and FeSO4 7H2O. Mycelia immobilized on polyurethane foam cells showed some times increase in uptake compared with that of free cells. Metal ions accumulation from a mixed solution was decreased slightly for cobalt and iron and considerable for copper ions. Heavy metal uptake was examined in the immobilized column experiments and more than 92% heavy metal removal (mg heavy metals removed/mg heavy metals added) from a mixed solution was achieved during the 5 cycles. During these experiments, the dry weight of the immobilized cells was decreased by only 2%. These results showed that immobilized mycelia of Rhizopus delemar can be used repeatedly for removal of heavy metals from aqueous solutions.     

Biosorption of heavy metals by Bacillus thuringiensis strain OSM29 originating from industrial effluent contaminated north Indian soil

The study was navigated to examine the metal biosorbing ability of bacterial strain OSM29 recovered from rhizosphere of cauliflower grown in soil irrigated consistently with industrial effluents. The metal tolerant bacterial strain OSM29 was identified as Bacillus thuringiensis following 16S rRNA gene sequence analysis. In the presence of the varying concentrations (25–150 mgl⁻¹) of heavy metals, such as cadmium, chromium, copper, lead and nickel, the B. thuringiensis strain OSM29 showed an obvious metal removing potential. The effect of certain physico-chemical factors such as pH, initial metal concentration, and contact time on biosorption was also assessed. The optimum pH for nickel and chromium removal was 7, while for cadmium, copper and lead, it was 6. The optimal contact time was 30 min. for each metal at 32 ± 2 °C by strain OSM29. The biosorption capacity of the strain OSM29 for the metallic ions was highest for Ni (94%) which was followed by Cu (91.8%), while the lowest sorption by bacterial biomass was recorded for Cd (87%) at 25 mgl⁻¹ initial metal ion concentration. The regression coefficients obtained for heavy metals from the Freundlich and Langmuir models were significant. The surface chemical functional groups of B. thuringiensis biomass identified by Fourier transform infrared (FTIR) were amino, carboxyl, hydroxyl, and carbonyl groups, which may be involved in the biosorption of heavy metals. The biosorption ability of B. thuringiensis OSM29 varied with metals and was pH and metal concentration dependent. The biosorption of each metal was fairly rapid which could be an advantage for large scale treatment of contaminated sites.     

Metal tolerance and biosorption potential of filamentous fungi isolated from metal contaminated agricultural soil

Heavy metal analysis of agricultural field soil receiving long-term (>20 years) application of municipal and industrial wastewater showed two- to five-fold accumulation of certain heavy metals as compared to untreated soil. Metal-resistant fungi isolated from wastewater-treated soil belonged to genera Aspergillus, Penicillium, Alternaria, Geotrichum, Fusarium, Rhizopus, Monilia and Trichoderma. Minimum inhibitory concentrations (MIC) for Cd, Ni, Cr, Cu, and Co were determined. The MIC ranged from 0.2 to 5 mg ml(-1) for Cd, followed by Ni (0.1-4 mg ml(-1)), Cr (0.3-7 mg ml(-1)), Cu (0.6-9 mg ml(-1)) and for Co (0.1-5 mg ml(-1)) depending on the isolate. Aspergillus and Rhizopus isolates were tested for their metal biosorption potential for Cr and Cd in vitro. Biosorption experiments were conducted with initial metal concentrations of 2, 4, 6 and 8 mM with a contact time of 4 h and wet fungal biomass (1-5 g) at 25 degrees C. Maximum biosorption of Cr and Cd ions was found at 6 mM initial metal concentration. Aspergillus sp.1 accumulated 1.20 mg of Cr and 2.72 mg of Cd per gram of biomass. Accumulation of these two metals by very tolerant Aspergillus sp.2 isolate was at par with relatively less tolerant Aspergillus sp.1 isolate. Rhizopus sp. accumulated 4.33 mg of Cr and 2.72 mg of Cd per g of biomass. The findings indicated promising biosorption of cadmium and chromium by the Rhizopus and Aspergillus spp. from aqueous solution. There is little, if any, correlation between metal tolerance and biosorption properties of the test fungi.     

Pseudomonas aeruginosa immobilized multiwalled carbon nanotubes as biosorbent for heavy metal ions

Pseudomonas aeruginosa immobilized multiwalled carbon nanotubes has been used as biosorbent for the solid phase extraction of some heavy metal ions in environmental samples. Cobalt(II), cadmium(II), lead(II), manganese(II), chromium(III) and nickel(II) ions have been selected as analytes for the presented study, due to their important negative and positive roles in human life. In order to investigate quantitative biosorption conditions of the analytes, the influences of pH of the aqueous solution, eluent type, eluent volume, samples volume, etc. were examined. The effects of alkaline, earth alkaline and some transitions metals on the biosorption of analyte ions on P. aeruginosa immobilized multiwalled carbon nanotubes were also investigated. The presented biosorption procedure was applied to the determination of analytes in tomato leaves, bovine liver, boiled wheat, canned fish, black tea, lichen and natural water samples.     

Biosorption of Ni, Cr and Cd by metal tolerant Aspergillus niger and Penicillium sp. using single and multi-metal solution

Fungi including Aspergillus and Penicillium, resistant to Ni2+, Cd2+, and Cr6+ were isolated from soil receiving long-term application of municipal wastewater mix with untreated industrial effluents of Aligarh, India. Metal tolerance in term of minimum inhibitory concentration (MIC) was 125-550 microg/ml for Cd, 300-850 microg/ml for Ni and 300-600 microg/ml for Cr against test fungi. Two isolates, Aspergillus niger and Penicillium sp. were tested for their Cr, Ni and Cd biosorption potential using alkali treated, dried and powdered mycelium. Biosorption experiment was conducted in 100 ml of solution at three initial metal concentrations i.e., 2, 4 and 6 mM with contact time (18 hr) and pretreated fungal biomass (0.1g) at 25 degrees C. Biosorption of all metals was found higher at 4 mM initial metal concentration as compared to biosorption at 2 and 6 mM concentrations. At 4 mM initial metal concentration, chromium biosorption was 18.05 and 19.3 mg/g of Aspergillus and Penicillium biomasses, respectively. Similarly, biosorption of Cd and Ni ions was also maximum at 4 mM initial metal concentration by Aspergillus (19.4 mg/g for Cd and 25.05 mg/g of biomass for Ni) and Penicillium (18.6 mg/g for Cd and 17.9 mg/g of biomass for Ni). In general, biosorption of metal was influenced by initial metal concentration and type of the test fungi. The results indicated that fungi of metal contaminated soil have high level of metal tolerance and biosorption properties.     

Microalgal-luffa sponge immobilized disc: a new efficient biosorbent for the removal of Ni(II) from aqueous solution

AIMS: The aim was to develop a new, efficient and cost-effective biosorbent for the removal of heavy metals from aqueous solution. METHODS AND RESULTS: A new biosorbent was developed by immobilizing a unicellular green microalga Chlorella sorokiniana within luffa sponge discs and used for the removal of metal ions from aqueous solution. Microalgal-luffa sponge immobilized discs (MLIDs) removed Ni(II) very rapidly, with 97% of equilibrium loading being reached in 5 min. MLIDs were tested for their potential to remove Ni(II) from aqueous solution in fixed-bed column bioreactor. The regenerated MLIDs retained 92.9% of the initial binding capacity for Ni(II) up to five cycles of reuse. CONCLUSIONS: In this study for the first time, C. sorokiniana biomass immobilized within luffa sponge disc was successfully used as a metal biosorbent for the removal of Ni(II). It appears that MLIDs can be used as an effective biosorbent for efficient removal of Ni(II) or other metals from aqueous solution. SIGNIFICANCE AND IMPACT OF THE STUDY: MLIDs biosorption system was shown to have good biosorption properties with respect to Ni(II). Efficient metal removal ability of MLIDs, low cost and simplicity of the technique used for the preparation of MILDs could provide an attractive strategy for developing high-affinity biosorption system for heavy metal removal.     

Microbial biomass: an economical alternative for removal of heavy metals from waste water

Today indiscriminate and uncontrolled discharge of metal contaminated industrial effluents into the environment has become an issue of major concern. Heavy metals, being non-biodegradable and persistent, beyond a permissible concentration form unspecific compounds inside the cells thereby causing cellular toxicity. The only alternative to remove them from the wastewater is by immobilizing them. The conventional methods adopted earlier for this purpose included chemical precipitation, oxidation, reduction, filtration, electrochemical treatment, evaporation, adsorption and ion-exchange resins. These methods require high energy inputs especially when it refers to dilute solutions. Here microbial biomass offers an economical option for removing heavy metals by the phenomenon of biosorption. Non-living or dead biomass sequester metal(s) on their cell surface due to certain reactive groups available like carboxyl, amine, imidazole, phosphate, sulphydryl, sulfate and hydroxyl. The process can be made economical by procuring spent biomass from industry or naturally available bulk biomass. A batch or a continuous process of removal of heavy metals directly from effluents can be developed in a fixed bed reactor using the immobilized biomass. Further biosorption potential of the biomass can be improved by various physical and chemical treatments. The availability of variety of microbial biomass and their metal binding potential makes it a economical and sustainable option for developing effluent treatment process for removal and recovery of heavy metals.     

Biosorption of Heavy Metals from Wastewater by Biosolids

In a study where the removal of heavy metals from wastewater is the primary aim, the biosorption of heavy metals onto biosolids prepared as Pseudomonas aeruginosa immobilized onto granular activated carbon was investigated in batch and column systems. In the batch system, adsorption equilibriums of heavy metals were reached between 20 and 50 min, and the optimal dosage of biosolids was 0.3 g/L. The biosorption efficiencies were 84, 80, 79, 59 and 42 % for Cr(VI), Ni(II), Cu(II), Zn(II) and Cd(II) ions, respectively. The rate constants of biosorption and pore diffusion of heavy metals were 0.013–0.089 min^–1 and 0.026–0.690 min^–0.5. In the column systems, the biosorption efficiencies for all heavy metals increased up to 81–100 %. The affinity of biosorption for various metal ions towards biosolids was decreased in the order: Cr = Ni > Cu > Zn > Cd.     

Multi-metal biosorption and bioaccumulation by Exiguobacterium sp. ZM-2

The present work deals with the biosorption performance of dried and non-growing biomasses of Exiguobacterium sp. ZM-2, isolated from soil contaminated with tannery effluents, for the removal of Cd²⁺, Ni²⁺, Cu²⁺, and Zn²⁺ from aqueous solution. The metal concentrations studied were 25 mg/l, 50 mg/l, 100 mg/l, 150 mg/l and 200 mg/l. The effect of solution pH and contact time was also studied. The biosorption capacity was significantly altered by pH of the solution. The removal of metal ions was conspicuously rapid; most of the total sorption occurred within 30 min. The sorption data have been analyzed and fitted to the Langmuir and Freundlich isotherm models. The highest Q_max value was found for the biosorption of Cd²⁺ at 43.5 mg/g in the presence of the non-growing biomass. Recovery of metals (Cd²⁺, Zn²⁺, Cu²⁺ and Ni²⁺) was found to be better when dried biomass was used in comparison to non-growing biomass. Metal removal through bioaccumulation was determined by growing the bacterial strain in nutrient broth amended with different concentrations of metal ions. This multi-metal resistant isolate could be employed for the removal of heavy metals from spent industrial effluents before discharging them into the environment.     

Copper biosorption by Auricularia polytricha

AIMS: The objective of the present study was to determine the optimum conditions for copper (Cu) biosorption by Auricularia polytricha mycelium in view of its immobilization in polyvinyl alcohol (PVA). METHODS AND RESULTS: The adsorption of Cu(II) onto A. polytricha was studied in batch with respect to initial pH, temperature, adsorption time, initial metal ion and biomass concentration. At optimal adsorption conditions, biomass was immobilized in PVA in column and a biosorption capacity of about 90% was obtained. CONCLUSIONS: Auricularia polytricha strain could successfully be used as Cu biosorbent. SIGNIFICANCE AND IMPACT OF THE STUDY: The low cost and simplicity of the technique make it suitable for the detoxification of contaminated effluents before their environmental discharge.     

Impact of fluorides on the removal of heavy metals from an electroplating effluent using a flocculent brewer’s yeast strain of Saccharomyces cerevisiae

Abstract

Besides several toxic heavy metals, electroplating effluents can have in solution different cations and anions, which may influence heavy metals removal by the biomass. Among them, fluorides are commonly used in the electroplating industries and thus can be found in the respective wastewaters. In the present work, the effect of the presence of fluorides in the efficiency of chromium(III), copper(II) and nickel(II) removal, from an effluent, by heat-inactivated cells of a brewing flocculent strain of Saccharomyces cerevisiae was evaluated. The presence of fluorides severely decreased (>60%) the removal of chromium(III) by yeast biomass. This effect impaired the effective treatment of the effluent according to the US Environmental Protection Agency and the Portuguese law; conversely, a higher removal of copper(II) and nickel(II) was observed. This behaviour can be understood by metal speciation. In the presence of fluorides, chromium(III) was mainly complexed, becoming unavailable for yeast accumulation; this effect decreased the efficiency of chromium(III) removal. Thus, in the presence of fluorides, less chromium(III) is associated with biomass and consequently more yeast binding sites remain available for the uptake of other metals present in solution. This fact explains the increase of copper(II) and nickel(II) removal in the presence of fluorides.     

Biosorption of Chromium(VI) and Lead(II): Role of Spirulina platensis in the Treatment of Industrial Effluent

Biosorption is the process of removal of any chemical molecules by the treatment of biological material. Industrialization resulted in the discharge of various toxic heavy metals into water bodies, which poses serious health hazards to humans and animals. In the present study, live Spirulina platensis was used as a biosorbent for the removal of the heavy metals chromium (Cr(VI)) and lead (Pb(II)) from the aqueous samples. S. platensis were cultured in the presence of different concentrations of heavy metals. The growth of the algal cells was found to be decreased by 59% and 36% in media containing 50 ppm Cr(VI) and Pb(II), respectively. To assess the biosorption of heavy metals, at different time intervals, the spent culture media were used to detect Cr(VI) by atomic absorption spectroscopy method and Pb(II) by 4-(2-pyridylazo)resorcinol indicator method. Results suggested that there was a significant uptake of Cr(VI) and Pb(II) from the medium by S. platensis, with corresponding decrease of metals in the medium. When metal salt solutions or industrial effluent samples were passed through the column containing immobilized live S. platensis in calcium alginate beads, the concentration of Cr(VI) was found to be reduced drastically. The present study indicates the application of S. platensis for the bioremediation of heavy metals from the samples obtained from industrial effluents.     

基因工程菌大肠杆菌JM109富集废水中镍离子的研究

利用通过基因工程技术所构建的在细胞内同时表达出高特异性镍转运蛋白和金属硫蛋白的基因工程菌富集水体中的镍离子。菌体细胞对Ni²⁺的富集速率很快,富集过程满足Langmuir等温线模型。与原始宿主菌相比,经基因改造的基因工程菌不仅最大镍富集容量增加了5倍多,而且对pH值、离子强度的变化及其它共存重金属离子的影响都呈现出更强的适应性。相比而言,Na⁺、Ca²⁺、Cd²⁺、Pb²⁺的影响较小,但Mg²⁺、Hg²⁺和Cu²⁺所引起的负面效应较大。进一步的实验表明基因工程菌对Ni2+的富集行为不需要外加营养物质。     

Bioremediation of Heavy Metals in Liquid Media Through Fungi Isolated from Contaminated Sources

Wastewater particularly from electroplating, paint, leather, metal and tanning industries contain enormous amount of heavy metals. Microorganisms including fungi have been reported to exclude heavy metals from wastewater through bioaccumulation and biosorption at low cost and in eco-friendly way. An attempt was, therefore, made to isolate fungi from sites contaminated with heavy metals for higher tolerance and removal of heavy metals from wastewater. Seventy-six fungal isolates tolerant to heavy metals like Pb, Cd, Cr and Ni were isolated from sewage, sludge and industrial effluents containing heavy metals. Four fungi (Phanerochaete chrysosporium, Aspegillus awamori, Aspergillus flavus, Trichoderma viride) also were included in this study. The majority of the fungal isolates were able to tolerate up to 400 ppm concentration of Pb, Cd, Cr and Ni. The most heavy metal tolerant fungi were studied for removal of heavy metals from liquid media at 50 ppm concentration. Results indicated removal of substantial amount of heavy metals by some of the fungi. With respect to Pb, Cd, Cr and Ni, maximum uptake of 59.67, 16.25, 0.55, and 0.55 mg/g was observed by fungi Pb3 (Aspergillus terreus), Trichoderma viride, Cr8 (Trichoderma longibrachiatum), and isolate Ni27 (A. niger) respectively. This indicated the potential of these fungi as biosorbent for removal of heavy metals from wastewater and industrial effluents containing higher concentration of heavy metals.     

Biosorption of nickel (II) from effluent of electroplating industry by immobilized cells of Bacillus species

In this study, Ni (II) biosorption capacity of immobilized cells of Bacillus sp. was investigated. Biosorption of Ni (II) was carried out in batch experiments and the important environmental conditions were optimized. The uptake of metal was rapid, and equilibrium was attained within 270 min. Bacillus strains (ten cultures) were isolated from nickel electroplating effluent by heat shock method. These isolates were grown up in nutrient broth supplemented with Ni (II)(50 mg/L). The culture, exhibiting maximum biosorption capacity (q^max: 118 mg/g), was selected and labeled Bacillus Bio‐4. In order to develop an economical biosorption process cell mass of Bacillus, Bio‐4 was immobilized in Na‐alginate. It was concluded from the results that biosorption of nickel is highly dependent on the type of sorbent and experimental conditions employed. Our results demonstrate that 6.0 mg immobilized cells (18 mg cell biomass in 3.0 mL of 1% Na alginate) had a maximum biosorption capacity of 113 mg Ni(II) per liter of suspension at pH 8.0, 100 rpm and 25°C. The Ni (II) removal was estimated to be 97.4%.     

Sources and Contamination of Heavy Metals in Sediments of Kabul River: The Role of Organic Matter in Metals Retention and Accumulation

In this study, sediment samples were collected from Kabul River (Pakistan) and analyzed for heavy metals including zinc (Zn), cadmium (Cd), chromium (Cr), nickel (Ni) and lead (Pb). The physico-chemical characteristics were also determined which are known to influence the metal accumulation within the sediment matrix. Heavy metal concentrations (mg kg^?1, dry weight basis) in the sediment were in the order of Zn > Cr > Ni > Pb > Cd. Heavy metal concentrations were found in moderately polluted category set by U. S. Environmental Protection Agency (USEPA). However, Cr and Ni concentrations exceeded the screening levels at the sites where a larger volume of industrial effluents enter into Kabul River. Higher concentrations of almost all the tested metals were detected at locations of greater industrial and sewage entry points. Sediment organic matter (OM) exhibited strong correlation with Pb (R² = 0.80), Ni (R² = 0.67) and Zn (R² = 0.46), indicating that OM plays a significant role in metal retention and accumulation. The findings of this study showed that Kabul River is reasonably contaminated with selected heavy metals released from anthropogenic sources. In the study area, sewage discharge was the major source of heavy metals including Zn and Pb, which were observed at locations where sewage effluents enter into the river.     

A comparative study on heavy metal biosorption characteristics of some algae

The biosorption of copper(II), nickel(II) and chromium(VI) from aqueous solutions on dried (Chlorella vulgaris, Scenedesmus obliquus and Synechocystis sp.) algae were tested under laboratory conditions as a function of pH, initial metal ion and biomass concentrations. Optimum adsorption pH values of copper(II), nickel(II) and chromium(VI) were determined as 5.0, 4.5 and 2.0. respectively, for all three algae. At the optimal conditions, metal ion uptake increased with initial metal ion concentration up to 250 mg l⁻¹. Experimental results also showed the influence of the alga concentration on the metal uptake for all the species. Both the Freundlich and Langmuir adsorption models were suitable for describing the short-term biosorption of copper(II), nickel(II) and chromium(VI) by all the algal species.     

Continuous itaconic acid production by immobilized biocatalysts.

The continuous itaconic acid production from sucrose with Aspergillus terreus TKK 200-5-3 mycelium immobilized on polyurethane foam cubes was optimized in column bioreactors using statistical experimental design and empirical modelling. The highest itaconic acid product concentration calculated on the basis of the obtained model was 15.8 g l-1 in the investigated experimental area, when sucrose concentration was 13.5%, aeration rate 150 ml min-1 and residence time 178 h. From sucrose with immobilized A. terreus TKK 200-5-3 mycelium itaconic acid production was stable for at least 4.5 months in continuous column bioreactors. In comparison, using glucose as substrate and immobilized A. terreus TKK 200-5-1 mycelium as biocatalyst similar stability was obtained with higher product concentration. The omission of copper sulphate from the production medium gave the highest itaconic acid product concentration (26 g l-1) from 9% glucose with 0.25% ammonium nitrate and 0.095% magnesium sulphate.     

Selective biosorption and recovery of Ruthenium from industrial effluents with Rhodopseudomonas palustris strains

This study demonstrated for the first time the possibility to remove and partially recover the Ruthenium contained in industrial effluents by using purple non sulfur bacteria (PNSB) as microbial biosorbents. Up to date, the biosorption was only claimed as possible tool for the removal of the platinum-group metals (PGM) but the biosorption of Ru was never experimentally investigated. The PNSBs tested have adsorbed around 40?mg?g (dry biomass)(-1) of the Ru contained in the real industrial effluents. At the end of the bioremoval experiments, the amount of Ru recovered from the biomass ranged from 42?% to 72?% of that adsorbed by PNSB, depending by the characteristics of the Ru effluent used. In any case, the use of microbial sorbents such as PNSB for the biosorption and recovery of Ru can be considered a way to reduce both the costs and the impact on the environment of the mining activities needed to obtain the increasing amounts of this rare and precious metal requested by the industrial activities related to its use.