Developing tools for investigating the multiple roles of ethylene: identification and mapping genes for ethylene biosynthesis and reception in barley

The plant hormone ethylene is important to many plant processes from germination through senescence, including responses to in vitro growth and plant regeneration. Knowledge of the number and function of genes that are involved in ethylene biosynthesis and reception is necessary to determine the role of specific genes within gene families known to influence ethylene biosynthesis and other aspects of ethylene function in plants. Our objective was built on previous studies that have established the critical role of ethylene in the in vitro response of barley (Hordeum vulgare L.), and that have identified ethylene-related QTL in the barley genome. In this study, we have identified the locations of genes in the barley 1-aminocyclopropane-1-carboxylic acid (ACC) synthase (ACS), ACC oxidase (ACO), and ethylene receptor (ETR) gene families. Specific primers for PCR amplification of each gene were developed and used to map these genes in the Oregon Wolf Barley mapping population. Five ACS, 8 ACO, and 7 ETR genes were identified and mapped to six of the barley chromosomes. Gene locations were syntenous to the orthologs in rice except for two that mapped to chromosome 6H. Gene duplication was evident for ACO genes on chromosomes 5H and 6H. Gene-specific primers will be useful for determining expression of each gene under various environmental conditions, including in vitro environments, to better understand the role of ethylene. Of the six known QTL for green plant regeneration in barley, three were located near the genes mapped in this study.     

Agroinfiltration is a versatile tool that facilitates comparative analyses of Avr9/Cf-9-induced and Avr4/Cf-4-induced necrosis

The avirulence genes Avr9 and Avr4 from the fungal tomato pathogen Cladosporium fulvum encode extracellular proteins that elicit a hypersensitive response when injected into leaves of tomato plants carrying the matching resistance genes, Cf-9 and Cf-4, respectively. We successfully expressed both Avr9 and Avr4 genes in tobacco with the Agrobacterium tumefaciens transient transformation assay (agroinfiltration). In addition, we expressed the matching resistance genes, Cf-9 and Cf-4, through agroinfiltration. By combining transient Cf gene expression with either transgenic plants expressing one of the gene partners, Potato virus X (PVX)-mediated Avr gene expression, or elicitor injections, we demonstrated that agroinfiltration is a reliable and versatile tool to study Avr/Cf-mediated recognition. Significantly, agroinfiltration can be used to quantify and compare Avr/Cf-induced responses. Comparison of different Avr/Cf-interactions within one tobacco leaf showed that Avr9/Cf-9-induced necrosis developed slower than necrosis induced by Avr4/Cf-4. Quantitative analysis demonstrated that this temporal difference was due to a difference in Avr gene activities. Transient expression of matching Avr/Cf gene pairs in a number of plant families indicated that the signal transduction pathway required for Avr/Cf-induced responses is conserved within solanaceous species. Most non-solanaceous species did not develop specific Avr/Cf-induced responses. However, co-expression of the Avr4/Cf-4 gene pair in lettuce resulted in necrosis, providing the first proof that a resistance (R) gene can function in a different plant family.     

Gene expression analysis of monospecies Salmonella typhimurium biofilms using differential fluorescence induction

Bacterial biofilm formation is an important cause of environmental persistence of food-borne pathogens, such as Salmonella Typhimurium. As the ensemble of bacterial cells within a biofilm represents different physiological states, even for monospecies biofilms, gene expression patterns in these multicellular assemblages show a high degree of heterogeneity. This heterogeneity might mask differential gene expression that occurs only in subpopulations of the entire biofilm population when using methods that average expression output. In an attempt to address this problem and to refine expression analysis in biofilm studies, we used the Differential Fluorescence Induction (DFI) technique to gain more insight in S. Typhimurium biofilm gene expression. Using this single cell approach, we were able to identify 26 genetic loci showing biofilm specific increased expression. For a selected number of identified genes, we confirmed the DFI results by the construction of defined promoter fusions, measurement of relative gene expression levels and construction of mutants. Overall, we have shown for the first time that the DFI technique can be used in biofilm research. The fact that this analysis revealed genes that have not been linked with Salmonella biofilm formation in previous studies using different approaches illustrates that no single technique, in casu biofilm formation, is able to identify all genes related to a given phenotype.     

Systematic approaches to using the FOX hunting system to identify useful rice genes

Ectopic gene expression, or the gain-of-function approach, has the advantage that once the function of a gene is known the gene can be transferred to many different plants by transformation. We previously reported a method, called FOX hunting, that involves ectopic expression of Arabidopsis full-length cDNAs in Arabidopsis to systematically generate gain-of-function mutants. This technology is most beneficial for generating a heterologous gene resource for analysis of useful plant gene functions. As an initial model we generated more than 23 000 independent Arabidopsis transgenic lines that expressed rice fl-cDNAs (Rice FOX Arabidopsis lines). The short generation time and rapid and efficient transformation frequency of Arabidopsis enabled the functions of the rice genes to be analyzed rapidly. We screened rice FOX Arabidopsis lines for alterations in morphology, photosynthesis, element accumulation, pigment accumulation, hormone profiles, secondary metabolites, pathogen resistance, salt tolerance, UV signaling, high light tolerance, and heat stress tolerance. Some of the mutant phenotypes displayed by rice FOX Arabidopsis lines resulted from the expression of rice genes that had no homologs in Arabidopsis . This result demonstrated that rice fl-cDNAs could be used to introduce new gene functions in Arabidopsis. Furthermore, these findings showed that rice gene function could be analyzed by employing Arabidopsis as a heterologous host. This technology provides a framework for the analysis of plant gene function in a heterologous host and of plant improvement by using heterologous gene resources.     

Analysis of cytoskeletal and motility proteins in the sea urchin genome assembly

The sea urchin embryo is a classical model system for studying the role of the cytoskeleton in such events as fertilization, mitosis, cleavage, cell migration and gastrulation. We have conducted an analysis of gene models derived from the Strongylocentrotus purpuratus genome assembly and have gathered strong evidence for the existence of multiple gene families encoding cytoskeletal proteins and their regulators in sea urchin. While many cytoskeletal genes have been cloned from sea urchin with sequences already existing in public databases, genome analysis reveals a significantly higher degree of diversity within certain gene families. Furthermore, genes are described corresponding to homologs of cytoskeletal proteins not previously documented in sea urchins. To illustrate the varying degree of sequence diversity that exists within cytoskeletal gene families, we conducted an analysis of genes encoding actins, specific actin-binding proteins, myosins, tubulins, kinesins, dyneins, specific microtubule-associated proteins, and intermediate filaments. We conducted ontological analysis of select genes to better understand the relatedness of urchin cytoskeletal genes to those of other deuterostomes. We analyzed developmental expression (EST) data to confirm the existence of select gene models and to understand their differential expression during various stages of early development.     

Comparative genomics and gene expression analysis identifies BBS9, a new Bardet-Biedl syndrome gene

Bardet-Biedl syndrome (BBS) is an autosomal recessive, genetically heterogeneous, pleiotropic human disorder characterized by obesity, retinopathy, polydactyly, renal and cardiac malformations, learning disabilities, and hypogenitalism. Eight BBS genes representing all known mapped loci have been identified. Mutation analysis of the known BBS genes in BBS patients indicate that additional BBS genes exist and/or that unidentified mutations exist in the known genes. To identify new BBS genes, we performed homozygosity mapping of small, consanguineous BBS pedigrees, using moderately dense SNP arrays. A bioinformatics approach combining comparative genomic analysis and gene expression studies of a BBS-knockout mouse model was used to prioritize BBS candidate genes within the newly identified loci for mutation screening. By use of this strategy, parathyroid hormone-responsive gene B1 (B1) was found to be a novel BBS gene (BBS9), supported by the identification of homozygous mutations in BBS patients. The identification of BBS9 illustrates the power of using a combination of comparative genomic analysis, gene expression studies, and homozygosity mapping with SNP arrays in small, consanguineous families for the identification of rare autosomal recessive disorders. We also demonstrate that small, consanguineous families are useful in identifying intragenic deletions. This type of mutation is likely to be underreported because of the difficulty of deletion detection in the heterozygous state by the mutation screening methods that are used in many studies.     

Plant tagnology

Transposable elements have been used as an effective mutagen and as a tool to clone tagged genes. Insertion of a transposable element into a gene can lead to loss- or gain-of-function, changes in expression pattern, or can have no effect on gene function at all, depending on whether the insertion took place in coding or non-coding regions of the gene. Cloning transposable elements from different plant species has made them available as a tool for the isolation of tagged genes using homologous or heterologous tagging strategies. Based on these transposons, new elements have been engineered bearing reporter genes that can be used for expression analysis of the tagged gene, or resistance genes that can be used to select for knockout insertions. While many genes have been cloned using transposon tagging following traditional forward genetics strategies, gene cloning has ceased to be the rate-limiting step in the process of determining sequence–function relations in several important plant model species. Large-scale insertion mutagenesis and identification of insertion sites following a reverse genetics strategy appears to be the best method for unravelling the biological role of the thousands of genes with unknown functions identified by genome or expressed sequence tag (EST) sequencing projects. Here we review the progress in forward tagging technologies and discuss reverse genetics strategies and their applications in different model species.     

Transgenic plants for enhanced biodegradation and phytoremediation of organic xenobiotics

Phytoremediation — the use of plants to clean up polluted soil and water resources — has received much attention in the last few years. Although plants have the inherent ability to detoxify xenobiotics, they generally lack the catabolic pathway for the complete degradation of these compounds compared to microorganisms. There are also concerns over the potential for the introduction of contaminants into the food chain. The question of how to dispose of plants that accumulate xenobiotics is also a serious concern. Hence the feasibility of phytoremediation as an approach to remediate environmental contamination is still somewhat in question. For these reasons, researchers have endeavored to engineer plants with genes that can bestow superior degradation abilities. A direct method for enhancing the efficacy of phytoremediation is to overexpress in plants the genes involved in metabolism, uptake, or transport of specific pollutants. Furthermore, the expression of suitable genes in root system enhances the rhizodegradation of highly recalcitrant compounds like PAHs, PCBs etc. Hence, the idea to amplify plant biodegradation of xenobiotics by genetic manipulation was developed, following a strategy similar to that used to develop transgenic crops. Genes from human, microbes, plants, and animals are being used successfully for this venture. The introduction of these genes can be readily achieved for many plant species using Agrobacterium tumefaciens-mediated plant transformation or direct DNA methods of gene transfer. One of the promising developments in transgenic technology is the insertion of multiple genes (for phase 1 metabolism (cytochrome P450s) and phase 2 metabolism (GSH, GT etc.) for the complete degradation of the xenobiotics within the plant system. In addition to the use of transgenic plants overexpressed with P450 and GST genes, various transgenic plants expressing bacterial genes can be used for the enhanced degradation and remediation of herbicides, explosives, PCBs etc. Another approach to enhancing phytoremediation ability is the construction of plants that secrete chemical degrading enzymes into the rhizosphere. Recent studies revealed that accelerated ethylene production in response to stress induced by contaminants is known to inhibit root growth and is considered as major limitation in improving phytoremediation efficiency. However, this can be overcome by the selective expression of bacterial ACC deaminase (which regulates ethylene levels in plants) in plants together with multiple genes for the different phases of xenobiotic degradation. This review examines the recent developments in use of transgenic-plants for the enhanced metabolism, degradation and phytoremediation of organic xenobiotics and its future directions.     

TILLING技术在植物功能基因组及育种中的应用

随着拟南芥、水稻等模式植物基因组测序计划的全面完成,数据库中大量的DNA序列需要进行功能注释,而用传统的正向遗传学进行基因克隆和近年来发展的反向遗传学（如插入突变、反义RNA、RNAi等技术）方法已不能适应基因组学的发展需求,因此,研发大规模、高通量的基因功能分析方法成为当务之急。TILLING技术（Targeting induced local lesions in genomes）就是在基因组生物学大背景下出现的一种全新的反向遗传学技术。TILLING技术的基本步骤是通过化学诱变方法产生一系列点突变,经过PCR扩增放大和变性复性过程产生异源双链DNA分子,再通过特异性酶切和双色电泳分析识别异源双链中错配碱基,从而检测出突变发生的准确位置。由于具有高通量、大规模、高灵敏度和自动化等特点,能够适应植物功能基因组学研究的要求,TILLING技术已经和即将在功能基因组领域发挥越来越重要的作用。TILLING技术应用于已测序完成的拟南芥和水稻中的突变位点检测并取得了巨大成功;TILLING技术应用于农作物的品种改良,可以帮助实现快速、定向改良作物的品种,同时由于TILLING采用的化学诱变技术与传统诱变育种并无二致,因此在作物改良中采用TILLING技术不存在外源基因转入引发的转基因作物（GMO）争论;由TILLING技术发展来的EcoTILLING技术,具有通量高、成本低、定位准确等优点,可以很好地进行多态性检测和研究基因的功能,已成为开展物种DNA多态性检测和不同物种演替进化研究的有力工具。本文简要介绍了TILLING的原理及操作步骤,讨论了TILLING技术的特点和优点及TILLING技术的应用前景。     

Clade classification of monolignol biosynthesis gene family members reveals target genes to decrease lignin in Lolium perenne

In monocots, lignin content has a strong impact on the digestibility of the cell wall fraction. Engineering lignin biosynthesis requires a profound knowledge of the role of paralogues in the multigene families that constitute the monolignol biosynthesis pathway. We applied a bioinformatics approach for genome‐wide identification of candidate genes in Lolium perenne that are likely to be involved in the biosynthesis of monolignols. More specifically, we performed functional subtyping of phylogenetic clades in four multigene families: 4CL, COMT, CAD and CCR. Essential residues were considered for functional clade delineation within these families. This classification was complemented with previously published experimental evidence on gene expression, gene function and enzymatic activity in closely related crops and model species. This allowed us to assign functions to novel identified L. perenne genes, and to assess functional redundancy among paralogues. We found that two 4CL paralogues, two COMT paralogues, three CCR paralogues and one CAD gene are prime targets for genetic studies to engineer developmentally regulated lignin in this species. Based on the delineation of sequence conservation between paralogues and a first analysis of allelic diversity, we discuss possibilities to further study the roles of these paralogues in lignin biosynthesis, including expression analysis, reverse genetics and forward genetics, such as association mapping. We propose criteria to prioritise paralogues within multigene families and certain SNPs within these genes for developing genotyping assays or increasing power in association mapping studies. Although L. perenne was the target of the analyses presented here, this functional subtyping of phylogenetic clades represents a valuable tool for studies investigating monolignol biosynthesis genes in other monocot species.