Studies on agenesis in the permanent dentition

Tooth dimensions in 104 males and females with agenesis of one or more permanent teeth, other than third molars, have been examined. The amounts of size reduction from normal in mesiodistal and buccolingual tooth diameters appear to be independent. Also some apparent differences from normal tooth size variability were noted. Interestingly, first molars and canines, both considered to be stable components of the dentition, showed significant variability in tooth size. In addition the incidence of individual tooth agenesis within this sample was noted and maxillary lateral incisor was most frequently absent in both sexes.     

Sexual dimorphism in crown units of mandibular deciduous and permanent molars in Australian Aborigines.

Sexual differences in the crown units of mandibular molars were investigated in Australian Aborigines. The first and second deciduous molars (dm1 and dm2), and first to third permanent molars (M1, M2 and M3) were measured on dental casts using a sliding caliper. Measurements of tooth crowns included overall mesiodistal and buccolingual diameters, as well as the mesiodistal and buccolingual diameters of the trigonid and talonid. Percentage dimorphism values were greater in the talonid dimensions than the trigonid, indicating that sex differences tend to be larger in the later-developing crown units. Sex differences in mesiodistal diameters increased from dm1 to M2 but decreased for M3, the tooth that showed the least dimorphism of all the molars. This result seems to be due to the marked variability in size of the M3 between individuals.     

Reduction of maxillary molars in Homo sapiens sapiens: a different perspective.

Crown and cusp areas, and buccolingual and mesiodistal diameters of maxillary molars of complete upper tooth rows (30 males, 30 females) were analysed in order to quantify changes in size and shape from the first to the third molar. Uni- and multivariate analyses revealed the mesial cusps, in particular the protocone (mesiolingual cusp), to be more stable than the other cusps. Although there is a gradient in size from the first to third molar, shape changes were found to be marked. Overall, the findings are in keeping with the field theory and the hypotheses of environmental constraints on later developing teeth. However, not all of the results could be entirely explained by these concepts. Functional aspects seem to account for the relative stability of the protocone and the buccolingual crown diameter. It appears that this functional complex is relatively stable despite the overall reduction of tooth size, which is probably secondary to processes occurring in the jaws and the cranium. This finding may have implications for studies on tooth reduction between populations of different time periods.     

Secular trend in tooth size in urban Chinese assessed from two-generation family data

Environmental improvements can lead to greater size of skeletodental structures as the population comes closer to expressing its genetic growth potential. Such secular trends have been documented in many human settings, especially for increased stature and faster tempos of growth. The present study is based on 185 same-sex parent-offspring pairs of data for maximum buccolingual crown diameters of the permanent teeth from a cohort in Beijing, China, where parents experienced much of their development during and after World War II with the deprivations of the changing regime. Their offspring enjoyed the relative stability of the established Communist system, where nutrition and stability were much improved. There were significant increases in buccolingual diameters of the premolars and molars in the offspring. Increase for premolars and molars was about 1%, but larger in females than males (1.6% vs. 0.5%). Opposite changes occurred in the incisors and canines (i.e., larger parental dimensions), but we contend that these are an age-related artifact brought on by greater passive eruption of older individuals' teeth that exposes a broader portion of the crown at the gingival margin. The secular trend in crown size coincides with other research in contemporary China, disclosing increases in body size and faster tempos of growth as health and nutrition continue to improve.     

Crown dimensions of deciduous teeth from pre-Columbian Peru

The mean mesiodistal and buccolingual diameters are presented for the deciduous teeth from Pre-Columbian Peru. Generally, the deciduous teeth from Pre-Columbian Peru are larger in most dimensions than the deciduous teeth of modern populations of European descent and smaller than those of modern Australian aboriginals. Differences in crown dimensions between the Pre-Columbian Peruvian deciduous teeth and those from Prehistoric Inamgaon and Mesolithic Europe are inconsistent. However, the maxillary and mandibular second molars are larger in the Peruvian population while the incisors are smaller. Since comparative data for prehistoric deciduous teeth are rare, this paper adds valuable data to the growing literature on deciduous crown dimensions.     

Intercusp relationships of the permanent maxillary first and second molars in American whites

Much of a human molar's morphology is concentrated on its occlusal surface. In view of embryologists' recent attention on the determination of crown morphology by enamel knots that initiate cusp formation, we were interested in the arrangement of cusp apices in the definitive tooth. Computer-assisted image analysis was used to measure intercusp distances and angles on permanent maxillary M1 and M2 in a sample of 160 contemporary North American whites. The intent was to generate normative data and to compare the size and variability gradients from M1 to M2. There is little sexual dimorphism in intercusp distances or angles, even though the conventional mesiodistal (MD) and buccolingual (BL) crown size is 2.0% and 4.0% larger in males, respectively, in these same teeth. Dimensions decreased in size and increased in variability from M1 to M2, but differentially. Cusps of the trigon were more stable between teeth, especially the paracone-protocone relationship. Principal components analysis on the six M1 distances disclosed only one eigenvalue above 1.0, indicating that overall crown size itself is the paramount controlling factor in this tooth that almost invariably exhibits a hypocone. In contrast, four components were extracted from among the 12 angular cusp relationships in M1. These axes of variation may prove useful in studies of intergroup differences. A shape difference occurs in M2, depending on whether the hypocone is present; when absent, the metacone is moved lingually, creating more of an isosceles arrangement for the cusps of the trigon. Statistically, correlations are low between occlusal intercusp relationships and conventional crown diameters measured at the margins of the crowns that form later. Weak statistical dependence between cusp relationships and traditional MD and BL diameters suggest that separate stage- and location-specific molecular signals control these different parts (and different stages) of crown formation.     

Alternative dental measurements: proposals and relationships with other measurements

Most archaeological and fossil teeth are heavily worn, and this greatly limits the usefulness of tooth crown diameter measurements, as they are usually defined at the widest points of the crown. There are alternatives, particularly measurements at the cervix of the tooth, where the crown joints the root, and measurements along a diagonal axis in molars, that are much less affected by wear. These would allow a wider range of specimens to be included, e.g., in the study of dental reduction in Upper Palaeolithic and Mesolithic Homo sapiens. In addition, they would allow the little-worn teeth of children to be compared directly with well-worn teeth in adults. These alternatives, however, have been little used, and as yet there have not been any studies of the repeatability with which they can be measured, or of the extent to which they are related to the more usual crown diameters. The present study is based on a group of unworn teeth, where direct comparisons could be made between the alternative measurements, which are not much affected by wear, with the usual crown diameters, which are very much affected. In an interobserver-error study of this material, cervical and diagonal measurements could be recorded as reliably as the usual crown diameters. The buccolingual cervical measurement was strongly correlated with the normal bucclingual crown diameter in all teeth, whereas the mesiodistal cervical measurement was highly correlated with the normal mesiodistal crown diameter in incisors and canines, but less so in premolars and molars. The molar diagonal measurements showed high correlations with all other measurements. Crown areas (robustness index) calculated from the usual diameters were strongly correlated with crown areas calculated from cervical measurements, and crown areas calculated from molar diagonals were strongly correlated with both other areas. Despite the long usage of the more usual maximum crown diameters, the alternative dental measurements could be measured just as reliably, could record similar information about tooth crown size, and would be better measures for the worn dentitions seen in archaeological and fossil material.     

Phenotypic selection on the dentition in a Late Archaic population of Ohio

Significant phenotypic selection acting on the buccolingual diameters of the permanent first and second molars is established for a Late Archaic population in Ohio. Directional selection appears to be acting on an index that increases the size of the maxillary first (UM1) and mandibular second (LM2) molars and decreases the size of the maxillary second (UM2) and mandibular first (LM1) molars. Variance selection is fundamentally disruptive but results in a more integrated (highly correlated) set of characteristics in the after-selection sample.     

Carabelli's trait and tooth size of human maxillary first molars

Carabelli's trait is a morphological feature that can occur on the protocone of human maxillary molars. This study tests the hypothesis that Carabelli's trait is correlated statistically with the dimensions of the crown's four principal cusps or whether, as a cingular feature, the trait truly accretes onto an otherwise unaffected crown. Computer-assisted image analysis was used to measure the 6 intercusp distances and 12 angular relationships among cusp tips on the permanent first molar of 300 young adult American whites. Carabelli's complex was scored using an 8-grade ordinal scheme. Crown size was quantified in three ways, namely as 1) maximum mesiodistal and buccolingual diameters, 2) the 6 intercusp distances, and 3) the 12 angular cusp arrangements. There was no sex difference in the morphological expression of Carabelli's trait in this sample. Overall crown size and intercusp distances were significantly and progressively larger in molars with larger Carabelli's trait expressions. There are graded size responses between crown size (mesiodistal and buccolingual diameters), sizes of the four principal cusps, and morphological stage of Carabelli's complex, though the statistical relationships are appreciably stronger in males than females. Carabelli's trait occurs preferentially in larger molars. In contrast, angular (shape) relationships among cusp tips are not discernibly affected by trait size in either sex. There is the situation, then, that Carabelli's trait is developmentally correlated with crown size, but with no apparent alteration of cusp arrangements, suggesting that the increases are isometric across the occlusal table. Why the association is much weaker in females remains speculative, but these data provide yet another line of evidence that, within a population, tooth size is associated in a positive fashion with crown complexity.     

The dentition of the Indian Knoll skeletal population: odontometrics and cusp number.

Data on the permanent dentition of 153 individuals from the well known Indian Knoll skeletal population are presented. Mesiodistal and buccolingual measurements were taken with a Helios dial caliper. Cusp number of maxillary and mandibular molars are recorded. The Indian Knoll dentition is larger than many modern groups but smaller than Australoid or Mesolithic groups. With the exception of maxillary 12, males have larger teeth than females in both dimensions. The lower canine is the most dimorphic tooth. Through rank order correlation, an association was shown between the sexual dimorphism of the mesiodistal and buccolingual dimensions. Compared to modern groups, the Indian Knoll population displays a moderate degree of sexual dimorphism in tooth size. In general, the coefficients of variation were greater for the more distal teeth within morphological classes. Amounts of size variability did not differ significantly between the sexes; moreover, rank order correlations indicated that patterns of variability in both dimensions were similar for males and females. The predominant cusp number pattern for upper molars is 4-3-3 and for lowers 5-5(4)-5. No sex differences were shown for cusp occurrence or bilateral asymmetry in cusp number.     

Crown dimensions of deciduous teeth from prehistoric India

Mean mesiodistal and buccolingual diameters are presented for deciduous teeth from the important Chalcolithic site of Inamgaon (1400–700 B.C.), a prehistoric farming community on the Deccan Plateau of western India. The deciduous teeth from Inamgaon are consistently larger than deciduous teeth of modern populations of European descent and smaller than the deciduous teeth of modern Australian aboriginals. Comparative data for prehistoric deciduous teeth are rare, especially for populations of southern Asia. The deciduous teeth of Mesolithic Europeans are comparable in size to certain dimensions of the Inamgaon teeth, and a small sample of deciduous teeth from the Iron Age site of Pomparippu (Sri Lanka) exhibits larger anterior teeth and smaller molar teeth than does the sample from Inamgaon.     

Brief communication: correcting overestimation when determining two-dimensional occlusal area in human molars

The robustness index (RI) is determined by multiplying dental mesiodistal and buccolingual diameters, and is used to estimate occlusal area. However, because teeth are not rectangular its calculation consistently causes overestimations. Moreover, teeth, in particular molars, are not identically shaped so overestimations vary. The current study seeks to determine the extent to which overestimations are affected by tooth shape and to improve RI's efficacy. Initially, 120 molars were sorted into six shape groups, which were determined by hypocone/hypoconulid expression. Three maxillary and three mandibular shape groups were set using the Arizona State University Dental Anthropology System. ANOVA results determined that RI overestimations, which averaged around 20%, were not the same for each shape category. Maxillary molars with large hypocones and mandibular molars with no hypoconulids were overestimated significantly less than the other molar groups. Regression-based correction formulae were generated and applied to the original sample. These formulae far more precisely estimated tooth area than RI and there were no differences in estimation based upon tooth shape. A subsequent validation study of 24 additional molars was undertaken to test the formulae on teeth not from the original sample. Overestimation/underestimation averaged 0.5% and was about the same for each of the tooth shape groups. Finally, six new correction formulae were generated using all 144 molars. The correction formulae provide, what is termed here, an adjusted robustness index (ARI), and it is recommended that ARI is used in future studies of molar occlusal area.     

Crown diameters of the deciduous teeth in Australian Aboriginals

Mesiodistal and buccolingual crown diameters were measured from dental casts representing the deciduous dentitions of 197 Aboriginal children from the Northern Territory of Australia. Double determination analysis indicated that the semi-automatic recording procedure used was reliable leading to observer errors of no practical significance. Tooth-size was greater in the male subjects but the sexual dimorphism was less marked than in the permanent teeth of the same subjects. The mandibular teeth were more uniform than maxillary with respect to buccolingual size relative to mesiodistal. Extremes of general tooth-size were more marked in the deciduous dentition than in the permanent as a consequence of the relatively large deciduous second molar which in Aboriginals approximates in size the permanent first molar of many other ethnic groups.     

Small tooth sizes in a nineteenth century South Carolina plantation slave series

Sub-Saharan African (and derived) populations typically exhibit larger mean tooth crown diameters than whites in spite of considerable population variability. We report on a 19th century series of American black slaves from a single cemetery near Charleston, South Carolina, that possessed notably smaller crown sizes. Analysis identifies a characteristic set of differences compared to caucasians, including retention of large maxillary lateral incisors and disproportionately large premolars and molars. Regression of principal components scores (derived from the mesiodistal diameters) on the sum of all diameters (used here as a measure of overall tooth mass) confirms a basic ethnic difference between black and white odontometrics: significantly more of the tooth mass is apportioned to the cheek teeth (premolars, molars) in blacks than whites. The difference (expressed as residuals from linear regression on tooth mass) holds for the several groups assessed here despite considerable intergroup variability in tooth sizes. Potential explanations for the notably small diameters of this plantation series are speculative, but may involve kin-based divergences and/or reflect the natural intergroup differences extant in the African slave sources.     

A differential environmental effect on human anterior tooth size

Factor-analytic studies of human tooth size routinely exhibit separate factors for the mesiodistal and buccolingual dimensions of anterior teeth but a single factor each for premolar and molar size. This observed independence within the anterior field is shown to be attributable to a much larger effect of environmental factors on the buccolingual vs. the mesiodistal diameters, a significant cause of which may be calculus accumulation hitherto unrecognized in the relevant literature. The heritability of dental dimensions is also discussed.     

Sexual dimorphism in modern human permanent teeth

On average, males possess larger tooth crowns than females in contemporary human populations, although the degree of dimorphism varies within different populations. In previous studies, different amounts of either enamel or dentine were implicated as the cause of this dimorphism. In this study, we attempt to determine the nature of sexual dimorphism in the crowns of permanent modern human teeth and to determine if two contrasting tooth types (permanent third molars and canines) show identical patterns of dimorphism in enamel and dentine distribution. We estimated the relative contributions of both enamel and dentine to total crown size, from buccolingual sections of teeth. Our sample consisted of a total of 144 mandibular permanent third molars and 25 permanent mandibular canines of known sex. We show that sexual dimorphism is likely due, in part, to the presence of relatively more dentine in the crowns of male teeth. However, whatever the underlying cause, dimorphism in both tooth root and tooth crown size should produce measurable dimorphism in tooth weight, though this has not been previously explored. Therefore, we provide some preliminary data that indicate the usefulness of wet tooth weight as a measure of sexual dimorphism. Both male permanent third molars and canines are significantly heavier than those of females. The weight dimorphism reported here for both classes of teeth may prove a useful finding for future forensic studies. In particular, weights of canines may be more useful as a means of sexing modern human skeletal material than linear or area measurements of teeth.     

Reduced tooth size in 45,X (Turner syndrome) females

Mean values and variances of deciduous and permanent tooth dimensions were compared between 121 45,X (Turner syndrome) females and 171 control subjects to clarify the role of the X chromosome on dental development. Although deciduous molars tended to be smaller than normal in 45,X females, there was no evidence of a reduction in tooth size for deciduous anterior teeth. In the permanent dentition, all mesiodistal dimensions were significantly smaller in 45,X females but only some of the buccolingual dimensions were smaller. The findings for deciduous tooth-size may reflect a sampling effect related to the extremely high frequency of spontaneous abortion in 45,X individuals. Results for permanent teeth are consistent with the concept of a decrease in enamel thickness in 45,X females.     

Metric dental variation of major human populations

Mesiodistal and buccolingual crown diameters of all teeth recorded in 72 major human population groups and seven geographic groups were analyzed. The results obtained are fivefold. First, the largest teeth are found among Australians, followed by Melanesians, Micronesians, sub-Saharan Africans, and Native Americans. Philippine Negritos, Jomon/Ainu, and Western Eurasians have small teeth, while East/Southeast Asians and Polynesians are intermediate in overall tooth size. Second, in terms of odontometric shape factors, world extremes are Europeans, aboriginal New World populations, and to a lesser extent, Australians. Third, East/Southeast Asians share similar dental features with sub-Saharan Africans, and fall in the center of the phenetic space occupied by a wide array of samples. Fourth, the patterning of dental variation among major geographic populations is more or less consistent with those obtained from genetic and craniometric data. Fifth, once differences in population size between sub-Saharan Africa, Europe, South/West Asia, Australia, and Far East, and genetic drift are taken into consideration, the pattern of sub-Saharan African distinctiveness becomes more or less comparable to that based on genetic and craniometric data. As such, worldwide patterning of odontometric variation provides an additional avenue in the ongoing investigation of the origin(s) of anatomically modern humans.     

Family studies of tooth size factors in the permanent dentition.

Correlations between dimensions of the permanent teeth in Australian Aboriginals were studied by factor analysis to disclose the main sources of shared variability. Findings indicated that in both males and females most of the common variability in the tooth dimensions could be accounted for by factors representing mesiodistal size of anterior teeth, buccolingual size of anterior teeth, generalized size of the premolars and generalized size of the molars. Factor scores derived from the analysis were used to calculate intraclass correlations among brothers and among sisters. These correlations tended to be higher for the factors contributing most to the common variability indicating that the factors might represent fields under direct genetic control. There was no trend for intraclass correlations among siblings derived from multivariate scores to be consistently higher than those based on observed tooth dimensions. The main advantage to the user of factor analysis is the ability to interpret associations between interrelated variables more objectively than is possible by conventional correlation methods.     

Congenital defects of the upper lateral incisors: Multivariate analysis of measurements of the other teeth,the superior arch,head and face

The survey of a French male population allowed us to ascertain 75 propositi with one or two missing ULI, 59 propositi with one or two reduced ULI and 99 controls on whom measurements (mesiodistal and buccolingual diameters) of all teeth of the superior arch are available. Principal Component Analysis gave a first estimated principal component highly correlated with each of the dental measurements or arch measurements. This size factor was eliminated by observing the plane of the second and third principal components. Strikingly different clusters of MD diameters or BL diameters were observed for the controls, the propositi missing one or two of the ULI and the propositi with reduced ULI. For the controls, the arch length is correlated with the MD molar diameters and the MD incisor diameter, the arch width being isolated from the other measurements. For the propositi with missing ULI, among the dental measurements the MD and BL diameters cluster, the arch length is isolated as are the arch widths. For the propositi with reduced ULI, the arch length is closer to the dental measurements while the widths, especially the first one, are isolated. The best discriminant measurements are the diameters of the first premolars and the canine, the first arch width and the arch length. Among controls, the arch is narrowed and shorter for the propositi with absence and wider for the propositi with reduction. Teeth measurements are always smaller in propositi.