Immobilisation of laccase on Eupergit supports and its application for the removal of endocrine disrupting chemicals in a packed-bed reactor

Laccase from Myceliophthora thermophila was covalently immobilised on Eupergit C and Eupergit C 250L yielding specific activities of up to 17 and 80 U/g, respectively. Due to its superior activity, Eupergit C 250L was chosen for further research. The somewhat lower catalytic efficiency (based on the ratio between the turnover number and the Michaelis constant, k_cat/K_M) of the immobilised enzyme in comparison with that of the free enzyme was balanced by its increased stability and broader operational window related to temperature and pH. The feasibility of the immobilised laccase was tested by using a packed bed reactor (PBR) operating in consecutive cycles for the removal of Acid Green 27 dye as model substrate. High degrees of elimination were achieved (88, 79, 69 and 57% in 4 consecutive cycles), while the levels of adsorption on the support varied from 18 to 6%, proving that dye removal took place mainly due to the action of the enzyme. Finally, a continuous PBR with the solid biocatalyst was applied for the treatment of a solution containing the following endocrine disrupting chemicals: estrone (E1), 17β-estradiol (E2) and 17α-ethinylestradiol (EE2). At steady-state operation, E1 was degraded by 65% and E2 and EE2 were removed up to 80% and only limited adsorption of these compounds on the support, between 12 and 22%, was detected. In addition, a 79% decrease in estrogenic activity was detected in the effluent of the enzymatic reactor while only 14% was attained by inactivated laccase.     

Sequential reactors for the removal of endocrine disrupting chemicals by laccase immobilized onto fumed silica microparticles

Abstract

The main objective of this study is the evaluation of the capability of laccase from Myceliophthora thermophila immobilized on fumed silica microparticles (fsMP) for the removal of endocrine disrupting chemicals (EDCs) in two enzymatic reactor configurations. This type of support can also be magnetized to allow the straightforward separation of the biocatalyst under a magnetic field. The support exhibited excellent biocompatibility with the enzyme, superior tolerance to pH and temperature as well as improved stability in comparison with the free enzyme, even in the presence of organic solvents and enzyme inhibitors. The technical feasibility of the removal of EDCs by immobilized laccase was assessed in two types of enzymatic reactors operated in sequential mode: a membrane reactor using fsMP-laccase and a reactor with magnetic separation using magnetized fsMP-laccase. The extent of transformation for the target compounds: bisphenol A (BPA) and 17β-estradiol (E2) was high and comparable to free laccase in both systems (up to 80%). The possibility of reusing the immobilized enzyme, especially for magnetized supports, offers an interesting approach in the development of enzyme based processes for the biotransformation of emerging pollutants.     

A comparison of entrapped and covalently bonded laccase: Study of its leakage,reusability, and the catalytic efficiency in TEMPO-mediated glycerol oxidation

This article presents the comparison for reusability and leakage between entrapped and covalently bonded laccase and their performances towards the selective oxidation of glycerol. The reusability of immobilized laccase enzyme was studied by reacting a batch of immobilized laccase with ABTS for 15 cycles. The investigation of the leakage of immobilized laccase was carried out by storing the immobilized laccase in acetate buffer solution for 32 days. The data show that the retained enzyme activities of entrapped and covalently bonded enzyme after being reused for eight cycles were well above 60% and the leakages after storing for a month in the acetate buffer at 4?°C were well below 15%. The entrapped laccase coupled with TEMPO was found to perform better and gave a two-fold higher yield of glyceraldehyde and glyceric acid in the selective oxidation of glycerol compared to covalently bonded laccase. Hence, physical entrapment of laccase would be a suitable immobilization method in the laccase-mediated selective oxidation of glycerol.     

Preparation and characterization of cross-linked laccase aggregates and their application to the elimination of endocrine disrupting chemicals

Laccase from the white rot fungus Coriolopsis polyzona was immobilized for the first time through the formation of cross-linked enzyme aggregates (CLEAs). Laccase CLEAs were produced by using 1000g of polyethylene glycol per liter of enzyme solution as precipitant and 200muM of glutaraldehyde as a cross-linking agent. These CLEAs had a laccase activity of 148Ug(-1) and an activity recovery of 60.2% when using 2,2'-azino-bis-(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) as substrate. CLEAs formed by co-aggregation with bovine serum albumin (BSA) as a stabilizer showed lower laccase activity and affinity for ABTS than those without BSA. The CLEAs co-aggregated with BSA showed higher residual activity against a protease, NaN(3), EDTA, methanol and acetone. The thermoresistance was higher for CLEAs than for free laccase and also higher for CLEAs co-aggregated with BSA than for simple CLEAs when tested at a pH of 3 and a temperature of 40 degrees C. Finally, laccase CLEAs were tested for their capacity to eliminate the known or suspected endocrine disrupting chemicals (EDCs) nonylphenol, bisphenol A and triclosan in a fluidized bed reactor. A 100-ml reactor with 0.5mg of laccase CLEAs operated continuously at a hydraulic retention time of 150min at room temperature and pH 5 could remove all three EDCs from a 5mgl(-1) solution.     

Immobilization of laccase from the white rot fungus Coriolopsis polyzona and use of the immobilized biocatalyst for the continuous elimination of endocrine disrupting chemicals

Laccase from the white rot fungus strain Coriolopsis polyzona was immobilized covalently on the diatomaceous earth support Celite^® R-633 using different strategies. A first methodology involved the sequential activation of the support surface with γ-aminopropyltriethoxysilane followed by the reaction of the functionalized surface with glutaraldehyde (GLU) or glyoxal (GLY) and the immobilization of laccase on the activated surface. Another strategy tested the simultaneous internal cross-linking of the protein with GLU or GLY and the immobilization of the laccase on the silanized surface. Finally, these two strategies were modified to test the impact of the concomitant addition of bovine serum albumin (BSA) as a stabilizing agent during the immobilization steps. The highest laccase activity and the greatest degree of activity recovery (tested using 2,2′-azino-bis-(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) as the substrate) were achieved by the sequential immobilization procedure using GLU as the cross-linking agent. The solid catalysts featuring internal cross-linking of the protein showed significantly higher stability against several denaturants. The Michaelis–Menten kinetic parameters with respect to ABTS revealed a higher affinity for this substrate in the case of the sequential procedure compared to the simultaneous approach. The biocatalyst formed using GLU in the sequential procedure was applied in a packed bed reactor for the continuous treatment of 5 mg l⁻¹ solutions of the endocrine disrupting chemicals (EDCs) nonylphenol (NP), bisphenol A (BPA) and triclosan (TCS) through repeated batch treatments. All of these EDCs could be eliminated at a contact time of less than 200 min by using, respectively, 3.75 units (U) of laccase activity for BPA and TCS and 1.88 U for NP. These performances of elimination were maintained over five consecutive treatment cycles using the same biocatalyst. This system could also remove these EDCs from 100 mg l⁻¹ solutions. The Michaelis–Menten kinetic parameters with respect to these chemicals showed a decreasing affinity of the solid biocatalyst for NP, TCS and BPA in that order.     

Laccase-poly(lactic-co-glycolic acid) (PLGA) nanofiber: highly stable, reusable, and efficacious for the transformation of diclofenac

Nanobiocatalysis has received growing attention for use in commercial applications. We investigated the efficiency, stability, and reusability of laccase-poly(lactic-co-glycolic acid) (PLGA) nanofiber for diclofenac transformation. NH stretching vibrations (3400-3500 cm(-1) and 1560 cm(-1)) in FT-IR spectra confirmed immobilization of laccase on PLGA nanofibers. The relative activity of immobilized laccase was 82% that of free laccase. Immobilized laccase had better storage, pH, and thermal stability than free laccase. The immobilized laccase produced complete diclofenac transformation in three reuse cycles, which was extended to 6 cycles in the presence of syringaldehyde. Results suggest that laccase-PLGA nanofiber may be useful for removing diclofenac from aqueous sources and has potential for other commercial applications.     

Utilization of cross‐linked laccase aggregates in a perfusion basket reactor for the continuous elimination of endocrine‐disrupting chemicals

A perfusion basket reactor (BR) was developed for the continuous utilization of insolubilized laccase as cross‐linked enzyme aggregates (CLEAs). The BR consisted of an unbaffled basket made of a metallic filtration module filled with CLEAs and continuously agitated by a 3‐blade marine propeller. The agitation conditions influenced both the apparent laccase activity in the reactor and the stability of the biocatalyst. Optimal laccase activity was obtained at a rotational speed of 12.5 rps and the highest stability was reached at speeds of 1.7 rps or lower. The activity and stability of the biocatalyst were affected drastically upon the appearance of vortices in the reaction medium. This reactor was used for the continuous elimination of the endocrine disrupting chemicals (EDCs) nonylphenol (NP), bisphenol A (BPA), and triclosan (TCS). Optimization of EDC elimination by laccase CLEAs as a function of temperature and pH was achieved by response surface methodology using a central composite factorial design. The optimal conditions of pH and temperature were, respectively, 4.8 and 40.3°C for the elimination of p353NP (a branched isomer of NP), 4.7 and 48.0°C for BPA, and 4.9 and 41.2°C for TCS. Finally, the BR was used for the continuous elimination of these EDCs from a 5 mg L^?1 aqueous solution using 1 mg of CLEAs at pH 5 and room temperature. Our results showed that at least 85% of these EDCs could be eliminated with a hydraulic retention time of 325 min. The performances of the BR were quite stable over a 7‐day period of continuous treatment. Furthermore, this system could eliminate the same EDCs from a 100 mg L^?1 solution. Finally, a mathematical model combining the Michaelis–Menten kinetics of the laccase CLEAs and the continuous stirred tank reactor behavior of the BR was developed to predict the elimination of these xenobiotics. Biotechnol. Bioeng. 2009;102: 1582–1592. © 2008 Wiley Periodicals, Inc.     

Biosensor for the determination of phenols based on cross-linked enzyme crystals (CLEC) of laccase

Cross-linked enzyme crystals (CLECs) are a versatile form of biocatalyst that can also be used for biosensor application. Laccase from Trametes versicolor (E.C.1.10.3.2) was crystallized, cross-linked and lyophilized with beta-cyclodextrin. The CLEC laccase was found to be highly active towards phenols like 2-amino phenol, guaiacol, catechol, pyrogallol, catechin and ABTS (non-phenolic). The CLEC laccase was embedded in 30% polyvinylpropylidone (PVP) gel and mounted into an electrode to make the sensor. The biosensor was used to detect the phenols in 50-1000 micromol concentration level. Phenols with lower molecular weight such as 2-amino phenol, catechol and pyrogallol gave a short response time where as the higher molecular weight substrates like catechin and ABTS had comparatively a long response time. The optimum pH of the analyte was 5.5-6.0 when catechol was used as substrate. The CLEC laccase retained good activity for over 3 months.     

Biocatalytic conversion of wheat bran hydrolysate using an immobilized GH43 beta-xylosidase

To investigate the concept of a xylosidase-based process for the continuous production of xylose from arabinoxylan-containing feedstocks, a beta-xylosidase from Bacillus halodurans C-125 was immobilized and deployed in packed bed reactor (PBR). Among the several immobilization methods tested, glutaraldehyde-mediated immobilization on chitosan was the best both in terms of immobilization and activity yields (91% and 72.9%, respectively). In batch experiments the immobilized enzyme hydrolyzed wheat bran hydrolysates quite efficiently, consuming nearly all xylobiose and xylotriose after 6h. Its reusability showed only a 50% decrease of its activity after 92h. Using the chitosan-immobilized beta-xylosidase in a PBR, xylose productivity was 7.2g xylose l(-1)h(-1) and the conversion factor was 0.55 (derived from initial xylose in the substrate). The operational stability of the PBR was good, because only 25% of productivity was lost after the treatment of three batches of substrate over a 72-h period.     

Conjugation of laccase from the white rot fungus Trametes versicolor to chitosan and its utilization for the elimination of triclosan

A commercial laccase from Trametes versicolor was conjugated with biopolymer chitosan using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC) as the cross-linking agent. Laccase-chitosan conjugation strategies were tested using different molar ratios of glucosamine monomer/protein with different molar excess ratios of EDC relative to laccase. Immobilization techniques were developed to improve the stability against thermal and chemical denaturation, storage and reusability of this biocatalyst. The conjugation resulted in a solid biocatalyst with an apparent laccase activity of ±626 U/g, 12 and 60 folds higher in the conjugation efficiency of biocatalyst relative to the immobilized and free laccase activity respectively when compared with zero EDC/laccase ratio used in conjugation solution. The conjugated laccases formed successfully eliminated the emerging pollutant triclosan (TCS) from aqueous solutions, having a higher potential to transform TCS than free laccase. UPLC-QTOF results indicate the formation of TCS oligomers. Furthermore, they are the first evidence of direct dechlorination of TCS mediated by the oxidative action of laccases.     

Repeated batch and continuous operations for phosphatidylglycerol synthesis from phosphatidylcholine with immobilized phospholipase D

Summary The repeated batch and continuous operations for transphosphatidylation reaction were carried out for phosphatidylglycerol (PG) synthesis from phosphatidylcholine (PC) with the help of immobilized cabbage phospholipase D (PLD) in the presence of glycerol. The biphasic reaction system was used which included the aqueous phase containing immobilized PLD along with high concentrations of glycerol (30%–50%) and buffer, whereas the main part of substrate (PC) and products (mainly PG) formed were in the organic phase (diethyl ether).Octyl-Sepharose CL-4B having a hydrophobic octyl group was chosen for the PLD immobilization. Both immobilization yield and activity yield of immobilized enzyme were 100%. The effects of solvents, temperature and glycerol concentrations on the immobilized PLD were examined. Repeated batch conversion of PC (15 g/l) to PG was examined with the immobilized PLD in 30% glycerol. In all five batch cycles examined, 100% selectivity was obtained and there was no significant decrease in the fractional conversion of PC to PG (98%–99%) in the first three batch cycles. In the cases of a packed-bed reactor (PBR) and a continuous stirred-tank reactor (CSTR) used for continuous synthesis of PG with the immobilized PLD, the operational stabilities of the immobilized enzyme were almost the same (half life=14 h at 30°C) when purified PC was used, while in the case of partially purified PC in CSTR the half life increased more than five times.Abbreviations used PC phosphatidylcholine - PG phosphatidylglycerol - PA phosphatidic acid - PLD phospholipase D - PBR packed bed reactor - CSTR continuous stirred tank reactor Studies on enzymatic conversion of phospholipids (III)     

Immobilization of Laccase by Alginate–Chitosan Microcapsules and its Use in Dye Decolorization

Laccase is a ligninolytic enzyme that is widespread in white-rot fungi. Alginate–chitosan microcapsules prepared by an emulsification–internal gelation technique were used to immobilize laccase. Parameters of the immobilization process were optimized. Under the optimal immobilization conditions (2% sodium alginate, 2% CaCl₂, 0.3% chitosan and 1:8 ratio by volume of enzyme to alginate), the loading efficiency and immobilized yield of immobilized laccase were 88.12% and 46.93%, respectively. Laccase stability was increased after immobilization. Both the free and immobilized laccase alone showed a very low decolorization efficiency when Alizarin Red was selected for dye decolorization test. When 0.1 mM 2,2′-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) was added into the decolorization system, the decolorization efficiency increased significantly. Immobilized laccase retained 35.73% activity after three reaction cycles. The result demonstrated that immobilized laccase has potential application in dyestuff treatment.     

Biodiesel production using Aspergillus niger as a whole‐cell biocatalyst in a packed‐bed reactor

Enzymatic lipase transesterification of palm oil to biodiesel in a packed‐bed reactor (PBR) using a novel strain of the fungus Aspergillus niger, immobilized within polyurethane biomass support particles (BSPs), was investigated. A three‐step addition of methanol was used to reduce lipase inhibition by immiscible methanol. The influence of water content and PBR flow rate was investigated. FAME yield was enhanced with an increase of PBR flow rate in the range of 0.15–30 L h^?1, where inefficient mixing of the reaction mixture at lower flow rates resulted in low conversion rates i.e. 69% after 72‐h reaction. Adding the third mole equivalent of methanol resulted in lipase inhibition due to methanol migration into the accumulated glycerol layer. Glutaraldehyde (GA) solution (0.5 vol.%) was used to stabilize lipase activity, which led to a high FAME yield (>90%) in the PBR after 72‐h of reaction time at a flow rate of 15 L h^?1, and a water content of 15%. Moreover, a high conversion rate (>85%) was maintained after four palm oil batch conversion cycles in the PBR. In contrast, lipase activity of non‐GA‐treated cells decreased with each PBR batch cycle, where only 70% FAME was produced after the forth PBR cycle. Transesterification of palm oil in a PBR system using BSPs‐immobilized A. niger as a whole‐cell biocatalyst is a viable process for enzymatic biodiesel production.     

Comparison of two continuous fungal bioreactors for posttreatment of anaerobically pretreated weak black liquor from kraft pulp mills

The purpose of this work was to evaluate and compare two continuous systems of posttreatment of anaerobically pretreated weak black liquor (WBL). The first system consisted of a packed bed reactor (PBR) with Trametes versicolor (Tv) immobilized on wood cubes of holm oak (biocubes). The second system was a fluidized bed reactor (FBR) with Lentinus edodes (Le) immobilized on wood cubes of holm oak. The reactors operated for 65 days at a hydraulic retention time (HRT) of 5 days, at 28 degrees C, with continuous aeration. Response variables monitored were conventional and specific, unit, net removal efficiency (eta and eta(sun), respectively) of chemical oxygen demand (COD), color, and ligninoids, and enzymatic activities of manganese peroxidase (MnP), lignin peroxidase (LiP), laccase (Lac) and proteases. The PBR showed an average color eta superior to that of the FBR (52.42 +/- 21.78% and 25.34 +/- 14.38% for PBR and FBR, respectively); removals of COD and ligninoids presented a similar pattern to that of color. Lac activity was significantly larger in PBR than in FBR. Activity of MnP in PBR was higher than that of the FBR (0.004 and 0.002 U MnP/mL, respectively). This difference could be ascribed to the different fungi present in each bioreactor. LiP activity was very low in both reactors. Average value of proteases was almost double in the FBR as compared with PBR (0.472 and 0.209 U Proteases/mL, respectively). During the last 2 weeks of operation, biocubes in the FBR experienced a significant loss of the attached Le biomass, probably by attrition. This and higher protease activity in the FBR could explain the lower pollutant removals achieved in the FBR. Overall, PBR with immobilized Tv showed a better performance than the FBR with Le for the posttreatment of the recalcitrant anaerobic effluent. Extended and sustained pollutant removal (65 days) was achieved in the PBR, although more research is needed to evaluate bioreactor performance at shorter hydraulic retention times.     

Immobilization of Acetobacter sp. CCTCC M209061 for efficient asymmetric reduction of ketones and biocatalyst recycling

ABSTRACT: BACKGROUND: The bacterium Acetobacter sp. CCTCC M209061 is a promising whole-cell biocatalyst with exclusive anti-Prelog stereoselectivity for the reduction of prochiral ketones that can be used to make valuable chiral alcohols such as (R)-4-(trimethylsilyl)-3-butyn-2-ol. Although it has promising catalytic properties, its stability and reusability are relatively poor compared to other biocatalysts. Hence, we explored various materials for immobilizing the active cells, in order to improve the operational stability of biocatalyst. RESULTS: It was found that Ca-alginate give the best immobilized biocatalyst, which was then coated with chitosan to further improve its mechanical strength and swelling-resistance properties. Conditions were optimized for formation of reusable immobilized beads which can be used for repeated batch asymmetric reduction of 4[prime]-chloroacetophenone. The optimized immobilized biocatalyst was very promising, with a specific activity of 85% that of the free-cell biocatalyst (34.66 mumol/min/g dw of cells for immobilized catalyst vs 40.54 mumol/min/g for free cells in the asymmetric reduction of 4[prime]-chloroacetophenone). The immobilized cells showed better thermal stability, pH stability, solvent tolerance and storability compared with free cells. After 25 cycles reaction, the immobilized beads still retained >50% catalytic activity, which was 3.5 times higher than degree of retention of activity by free cells reused in a similar way. The cells could be recultured in the beads to regain full activity and perform a further 25 cycles of the reduction reaction. The external mass transfer resistances were negligible as deduced from Damkohler modulus Da < <1, and internal mass transfer restriction affected the reduction action but was not the principal rate-controlling step according to effectiveness factors eta < 1 and Thiele modulus 0.3<[empty set] <1. CONCLUSIONS: Ca-alginate coated with chitosan is a highly effective material for immobilization of Acetobacter sp. CCTCC M209061 cells for repeated use in the asymmetric reduction of ketones. Only a small cost in terms of the slightly lower catalytic activity compared to free cells could give highly practicable immobilized biocatalyst.     

Stereoselective nitrile hydrolysis by immobilized whole-cell biocatalyst

The present work attempts to deal with the stability and reusability aspect of nitrilase from Alcaligenes faecalis for the production of (R)-(-)-mandelic acid. Four entrapment matrixes were screened to search for a suitable support, and alginate was found to have significant process advantages over its other counterparts. Thermodynamic analysis allowed us to account for decreased enantioselectivity (E) as a result of immobilization. The system was also characterized based on the Thiele modulus (phi). Efficient reusability of the biocatalyst up to 35 batches was achieved by immobilization as compared to 9 batches for free cells, and cross-linking extended it further to 40 batches. Finally, synthetic utility of the immobilized biocatalyst was demonstrated on a preparative scale to produce 640 g of (R)-(-)-mandelic acid with 97% enantiomeric excess (ee).     

Comparative studies on immobilized laccase behaviour in packed-bed and batch reactors

Extracellular laccase produced by the wood-rotting fungus Cerrena unicolor was immobilized covalently via glutaraldehyde to cellulose-based carrier Granocel. Laccase was partially purified by membrane concentration and diafiltration followed by precipitation with acetone. Five-fold increase in the measured activity of immobilized enzyme was obtained when six times purer laccase was used for immobilization. For the best preparation, with very high activity of 2053 U per 1 mL of the carrier, thermal- and pH-stability, and activity profiles were determined. Experiments carried out in a batch reactor showed that k_cat/K_m for immobilized enzyme (0.65) is three times lower than the value obtained for the native laccase (2.19) whereas k_cat/K_m estimated from continuous reactor (1.50) is notably closer to that for the native enzyme. Continuous process probably reflects more precisely kinetics of the reaction accompanied by simultaneous product precipitation on the carrier’s surface. Operational stability of immobilized laccase was tested in continuous mode operation with ABTS, guaiacol and trichlorophenol as substrates and showed that packed-bed reactor is unprofitable system for laccase immobilized on Granocel carrier due to the high bed compaction. However, excellent stability of the preparation was noted under 20 successive runs in the well mixed tank reactor and better ability towards trichlorophenol biotransformation was observed in the case of immobilized laccase.     

Green coconut fiber: a novel carrier for the immobilization of commercial laccase by covalent attachment for textile dyes decolourization

Commercial laccase formulation was immobilized on modified green coconut fiber silanized with 3-glycidoxypropyltrimethoxysilane, aiming to achieve a cheap and effective biocatalyst. Two different strategies were followed: one point (pH 7.0) and multipoint (pH 10.0) covalent attachment. The influence of immobilization time on enzymatic activity and the final reduction with sodium borohydride were evaluated. The highest activities were achieved after 2?h of contact time in all situations. Commercial laccase immobilized at pH 7.0 was found to have higher activity and higher affinity to the substrate. However, the immobilization by multipoint covalent attachment improved the biocatalyst thermal stability at 50?°C, when compared to soluble enzyme and to the immobilized enzyme at pH 7.0. The Schiff's bases reduction by sodium borohydride, in spite of causing a decrease in enzyme activity, showed to contribute to the increase of operational stability through bonds stabilization. Finally, these immobilized enzymes showed high efficiency in the continuous decolourization of reactive textile dyes. In the first cycle, the decolourization is mainly due to dyes adsorption on the support. However, when working in successive cycles, the adsorption capacity of the support decreases (saturation) and the enzymatic action increases, indicating the applicability of this biocatalyst for textile wastewater treatment.     

Laccase stabilization by covalent binding immobilization on activated polyvinyl alcohol carrier

AIMS: Attempts were made to immobilize laccase from Panus conchatus. METHODS AND RESULTS: The laccase was immobilized on carboxylated polyvinyl alcohol (PVA) activated by N-hydroxysuccinimide (N-HSI) in aqueous solution at different pHs, temperatures, and with different reaction times. An optimum condition for laccase immobilization is at pH 3.2, 40 degrees C and 12 h, respectively. Immobilization of laccase increased optimal pH for reaction with 2, 2'-azinobis (3-ethylbenzthiazoline-6-solfonate) (ABTS) and pH stability. Immobilized laccase proved to be reacted consecutively 17 times with only a 50% decrease on activity and be used in removal of 2,4,6-trichlorophenol (TCP). CONCLUSIONS: It was possible to immobilize the laccase on carboxylated polyvinyl alcohol by activation with N-hydroxysuccinimide in HAc-NaAc buffer. The immobilized laccase is both stable and reusable. SIGNIFICANCE IMPACT OF THE STUDY: The results indicate that this immobilized laccase can be used in the removal of poisonous effluent from pulp bleaching mills.     

Natural attenuation of endocrine-disrupting estrogens in an ecologically engineered treatment system (EETS) designed with floating, submerged and emergent macrophytes

Natural attenuation of estrogenic endocrine disrupting compounds (EDCs) such as estriol (E3, natural) and 17α-ethinylestradiol (EE2, synthetic) were evaluated in a designed ecologically engineered treatment system (EETS) along with domestic sewage. These two estrogens are the major contaminants of sewage and found to cause adverse effects on the endocrine system of humans and animals when exposed even in nanogram concentrations. The EETS consisted of three tanks containing diverse biota, viz., aquatic macrophytes, submerged plants, emergent plants, algae and bacteria present in the system mimic the natural cleansing functions of wetlands and help in the treatment of pollutants present in wastewater. During operation, 22 μg/l of E3 and EE2 were separately fed for 10 days each and operated in continuous mode (20 l/day). The floating macrophytes system (Tank 1) was more effective in removing estrogens [E3 - 61.77% (13.59 μg/l); EE2 - 69.09% (15.20 μg/l)] compared to the submerged-emergent macrophytes-based integrated system (Tank 2) [E3 - 16.58% (3.65 μg/l); EE2 - 18.52% (4.08 μg/l)] and submerged-rooted microphytes system (Tank 3) [E3 - 15.20%, (3.35 μg/l); EE2 - 7.72%, (1.70 μg/l)]. On the whole, EETS can effectively treat EDCs [E3 93.56% (20.59 μg/l); EE2 95.34% (20.97 μg/l)]. Removal of COD (68.06%), nitrates (60.02%) and turbidity (83.43%) was also observed simultaneously during EETS operation. The designed EETS is ecologically complex and mechanically simple and has very low energy consumption and function based on a natural cleansing mechanism (attenuation) with esthetic value.