Theoretical and experimental studies of the radiative properties of matter at high energy densities and their application to the problems of inertial confinement fusion

The paper presents the results of theoretical and experimental studies of the radiative properties of plasmas produced by heating and compression of various materials to high energy densities. The specific features of the theoretical plasma model known as the ion model, which is used to calculate the radiative characteristics of plasmas of complex chemical composition, are discussed. The theoretical approach based on this model is applied to the plasma produced during the explosion of the X-pinch wires. The theoretical estimate of the radiation efficiency is compared with the experimental data on the total energy yield from an X-pinch made of two different wires (NiCr and Alloy 188). The radiative characteristics of (C12 H16 O8) and (C8 H12 O6) plasmas are calculated for the temperature diagnostics of plasmas produced from porous targets employed in inertial confinement fusion experiments with the use of laser radiation and heavy-ion beams.     

Current scaling for the radiative characteristics of a micropinch discharge

The absolute VUV and soft X-ray (hν > 100 eV) yield from a micropinch discharge is measured for a fixed current of 150 kA. The current scaling in the range of 30–250 kA is found for a number of the discharge parameters: the VUV and soft X-ray yield, the electron temperature, the effective temperature of suprathermal electrons, and the energy of bremsstrahlung emission from thermal electrons. The experimental data are in good agreement with the simulations performed by using the model of radiative collapse in fast Z-pinches in plasmas of high-Zelements.     

Procedure for visualization of carbonic materials in maxillofacial surgery by spiral computed tomography

The paper considers whether carbonic materials whose contrasting is achieved when they contain 8-12% of metallic boron power may be applied to restore bone defects of the facial skull. Implants of this composition were employed to operate on 4 patients with different defects of the facial skull. A three-projection of SCT image obtained in the "SOFT" mode was used as a way of registration. The results of the studies have indicated that the materials under study have X-ray contrast, a complete biological compatibility, and non-toxicity when they are used in clinical practice.     

Effect of feed gas composition of gas discharge plasmas on Bacillus pumilus spore mortality

AIMS: To investigate the effect of gas composition on the sensitivity of Bacillus pumilus spores to gas plasmas. METHODS AND RESULTS: Inert gas plasmas, oxygen-based plasmas and various moisturized air plasmas were used to inactivate B. pumilus spores in low gas pressure of 50 Pa. Although the treatment temperature did not exceed 55 degrees C when exciting these plasmas, spore survival varied widely depending on the composition of the gas feed. Higher spore mortality was acquired by inert gases of low molecular weight except for helium. The highest spore mortality (4.54log reduction) was obtained when air with a 0.05 molar fraction of water vapour was used as the plasma carrier gas. CONCLUSIONS: Water molecules in the plasma carrier gas play a significant role in inactivation of B. pumilus spores. SIGNIFICANCE AND IMPACT OF THE STUDY: This strong inactivation may occur through hydroxyl free radicals generated from the moisturized air plasma.     

Phase transition in superdense hydrogen and deuterium

Results are presented from numerical simulations of the thermodynamic properties of superdense hydrogen and deuterium plasmas by the Monte Carlo method and from calculations by a multicomponent chemical model. The results obtained reveal the anomalous behavior of the thermodynamic functions and composition of molecular gas plasmas in the submegabar and megabar pressure ranges. Such behavior is interpreted as a dissociative phase transition. The results of calculations by the chemical model are compared with the experimental data on the equation of state and conductivity of hydrogen and deuterium plasmas.     

Preliminary research on body composition measurement using X-ray phase contrast imaging

Body composition measurement is of cardinal significance for medical and clinical applications. Currently, the dual-energy X-ray absorptiometry (DEXA) technique is widely applied for this measurement. In this study, we present a novel measurement method using the absorption and phase information obtained simultaneously from the X-ray grating-based interferometer (XGI). Rather than requiring two projection data sets with different X-ray energy spectra, with the proposed method, both the areal densities of the bone and the surrounding soft tissue can be acquired utilizing one projection data set. By using a human body phantom constructed to validate the proposed method, experimental results have shown that the compositions can be calculated with an improved accuracy comparing to the dual energy method, especially for the soft tissue measurement. Since the proposed method can be easily implemented on current XGI setup, it will greatly extend the applications of the XGI, and meanwhile has the potential to be an alternative to DEXA for human body composition measurement.     

Acoustic levitation: recent developments and emerging opportunities in biomaterials research

Containerless sample environments (levitation) are useful for study of nucleation, supercooling, and vitrification and for synthesis of new materials, often with non-equilibrium structures. Elimination of extrinsic nucleation by container walls extends access to supercooled and supersaturated liquids under high-purity conditions. Acoustic levitation is well suited to the study of liquids including aqueous solutions, organics, soft materials, polymers, and pharmaceuticals at around room temperature. This article briefly reviews recent developments and applications of acoustic levitation in materials R&D. Examples of experiments yielding amorphous pharmaceutical materials are presented. The implementation and results of experiments on supercooled and supersaturated liquids using an acoustic levitator at a high-energy X-ray beamline are described.     

Soft X-ray-induced decomposition of amino acids: an XPS, mass spectrometry, and NEXAFS study

Decomposition of five amino acids, alanine, serine, cysteine, aspartic acid, and asparagine, under irradiation with soft X rays (magnesium Kalpha X-ray source) in ultra-high vacuum was studied by means of X-ray photoelectron spectrometry (XPS) and mass spectrometry. A comparative analysis of changes in XPS line shapes, stoichiometry and residual gas composition indicates that the molecules decompose by several pathways. Dehydration, decarboxylation, decarbonylation, deamination and desulfurization of pristine molecules accompanied by desorption of H2, H2O, CO2, NH3 and H2S are observed with rates depending on the specific amino acid. NEXAFS spectra of cysteine at the carbon, oxygen and nitrogen K-shell and sulfur L2,3 edges complement the XPS and mass spectrometry data and show that the exposure of the sample to an intense soft X-ray synchrotron beam results in the formation of C-C and C-N double and triple bonds. Qualitatively, the amino acids studied can be arranged in the following ascending order of radiation stability: serine相似文献   

Potential applications of natural origin polymer-based systems in soft tissue regeneration

Despite the many advances in tissue engineering approaches, scientists still face significant challenges in trying to repair and replace soft tissues. Nature-inspired routes involving the creation of polymer-based systems of natural origins constitute an interesting alternative route to produce novel materials. The interest in these materials comes from the possibility of constructing multi-component systems that can be manipulated by composition allowing one to mimic the tissue environment required for the cellular regeneration of soft tissues. For this purpose, factors such as the design, choice, and compatibility of the polymers are considered to be key factors for successful strategies in soft tissue regeneration. More recently, polysaccharide-protein based systems have being increasingly studied and proposed for the treatment of soft tissues. The characteristics, properties, and compatibility of the resulting materials investigated in the last 10 years, as well as commercially available matrices or those currently under investigation are the subject matter of this review.     

Effective Method for Increasing the Peak SXR Power in Experiments on Implosion of Nested Arrays of Mixed Composition

Plasma Physics Reports - The paper presents the results of experiments with the compression of the plasma of double multiwire arrays of mixed composition and the generation of powerful soft X-ray...     

Spatiotemporal behavior of X-ray emission above 20 keV from a Z-pinch produced by wire-array implosion

Results are presented from experimental studies of hard X-ray (HXR) emission in the photon energy range above 20 keV from dense radiating Z-pinch plasmas. The work is aimed at revealing the nature of fast-electron (electron beam) generation during the implosion of cylindrical and conical wire arrays in the Angara-5-1 facility at currents of up to 3 MA. It is found that the plasma implosion zippering caused by the inclination of wires affects the parameters of the HXR pulse emitted during the implosion of a conical array. It is shown that HXR emission correlates well with the decay of the plasma column near the cathode in the stagnation phase. HXR images of the pinch are produced by the bremsstrahlung of fast electrons generated during plasma column decay and interacting with plasma ions and the anode target. It is found that the use of conical arrays makes it possible to control the direction of plasma implosion zippering and the spatiotemporal and energy parameters of the pinch X-ray emission, in particular the X-ray yield. For wire array with diameters of 12 mm and linear masses of 200–400 μg/cm, the current of the fast electron beam is 20 kA and its energy is 60 J, which is about 1/500 of the energy of the main soft X-ray pulse.     

Elemental analysis of uncultured magnetotactic bacteria exposed to heavy metals

Natural enrichments of magnetotactic bacteria were used to study the sites where heavy metals accumulate in uncultured bacteria. Most bacteria obtained by magnetic concentration from these enrichments contained, in addition to the magnetosomes, large phosphorus-rich granules in the cytoplasm. Metal (Zn, Mn, Sr, Cd, Al, Cr, and Pb) chlorides were added independently to the enrichments, and after 24 h, the elemental composition of the phosphorus-rich granules, magnetosomes, and "soft parts" (cytoplasm plus cell envelope) of whole bacteria was analyzed by energy-dispersive X-ray analysis on a transmission electron microscope. All bacteria contained Mn and Sr in the phosphorus-rich granules; some of them presented Mn peaks also in the soft parts. Zinc accumulation was variable and was found mainly in the phosphorus-rich granules, but also in the soft part of some bacteria. Some analyzed bacteria presented Zn peaks only in the soft parts, and some of them did not present Zn in any structure. Cadmium and Al were found only in the granules of some bacteria. Chromium was found in the soft parts of some bacteria. Lead was not detected in any bacteria. We concluded that the phosphorus-rich granules are major sites for metal accumulation by these bacteria. No conclusive results for magnetosomes were obtained because of the limitations of the analytical techniques particularly when used for whole cell analysis.     

Phase-contrast imaging for body composition measurement

PurposeIn this paper, we propose a novel method for human body composition measurement, especially for the bone mineral density (BMD) measurement. The proposed method, using the absorption and differential phase information retrieved from X-ray grating-based interferometer (XGBI) to measure the BMD, has potential to replace dual-energy X-ray absorptiometry (DEXA), which is currently widely used for body composition measurement.MethodsThe DEXA method employs two absorption images acquired at two different X-ray spectra (high energy and low energy) to calculate the human body composition. In this paper, a new method to calculate BMD using a single X-ray measurement is proposed. XGBI is a relatively new X-ray technique that provides absorption, phase and scattering information simultaneously using a single X-ray spectrum. With the absorption and differential phase information retrieved from XGBI, BMD can be measured using only one single X-ray spectrum. Numerical simulations are performed with a body phantom of bone (Cortical, ICRU-44) surrounded by soft tissue (Soft, ICRU-44). BMD is calculated with both the DEXA method and the proposed method.ResultsResults show that BMD can be measured accurately with the proposed method; moreover, better signal-to-noise ratio (SNR) is obtained compared to DEXA.ConclusionWith the proposed method, BMD can be measured with XGBI setup. Further, the proposed method can be realized using current X-ray phase-contrast imaging (XPCI) apparatus without any hardware modification, suggesting that this technique can be a promising supplementary function to current XPCI equipment.     

Engineering soft nanostructured functional materials via orthogonal chemistry

Nanostructured amphiphilic block copolymers, graft copolymers, polymeric thermally responsive molecular brushes and polymer stars are only few examples of macromolecular architectures accessible either via controlled/living radical polymerization (CLRP) techniques or the combination of CLRP mechanisms with efficient post-polymerization routes including click chemistry. Precise control over the composition, molecular weight and functionalities is a prerequisite for soft polymeric materials to self-organize into ordered morphologies. This contribution describes novel orthogonal chemical routes for the synthesis of macromolecular architectures and self-assembly of functional soft polymeric materials. Emerging potential applications of well-defined block and graft copolymers are outlined as well.     

Mitochondrial matrix granules in soft tissues : I. Elemental composition by X-ray microanalysis

The elemental composition of individual matrix granules in mitochondria of rat brown fat, mouse gall bladder and guinea pig kidney has been examined by X-ray microanalysis. The matrix granules showed a similar elemental composition that was strongly dependent upon the method of sample preparation. Low-temperature oxygen plasma microincineration or wavelength-dispersive X-ray spectrometers were used to demonstrate the presence of phosphorus in matrix granules of osmium tetroxide-fixed specimens. Matrix granule osmiophilia was retained in glutaraldehyde-fixed brown fat only if exposure to polar organic solvents was avoided during subsequent steps, e.g. by cryosectioning. As normally prepared, matrix granules lack detectable calcium but had bound this at detectable levels after fixation in osmium tetroxide, but not glutaraldehyde, supplemented with 5 mM Ca²⁺. The results demonstrate that mitochondrial matrix granules of normal soft tissues are not calcium phosphate deposits and contain phospholipids, apparently as a major constituent. Thus they provide evidence against the hypothesis that matrix granules are primarily involved in mitochondrial calcium sequestration and, indirectly, for the hypothesis that the granules may be related to inner membrane assembly.     

Muscle-driven finite element simulation of human foot movements

This paper describes a finite element scheme for realistic muscle-driven simulation of human foot movements. The scheme is used to simulate human ankle plantar flexion. A three-dimensional anatomically detailed finite element model of human foot and lower leg is developed and the idea of generating natural foot movement based entirely on the contraction of the plantar flexor muscles is used. The bones, ligaments, articular cartilage, muscles, tendons, as well as the rest soft tissues of human foot and lower leg are included in the model. A realistic three-dimensional continuum constitutive model that describes the biomechanical behaviour of muscles and tendons is used. Both the active and passive properties of muscle tissue are accounted for. The materials for bones and ligaments are considered as homogeneous, isotropic and linearly elastic, whereas the articular cartilage and the rest soft tissues (mainly fat) are defined as hyperelastic materials. The model is used to estimate muscle tissue deformations as well as stresses and strains that develop in the lower leg muscles during plantar flexion of the ankle. Stresses and strains that develop in Achilles tendon during such a movement are also investigated.     

Muscle-driven finite element simulation of human foot movements

This paper describes a finite element scheme for realistic muscle-driven simulation of human foot movements. The scheme is used to simulate human ankle plantar flexion. A three-dimensional anatomically detailed finite element model of human foot and lower leg is developed and the idea of generating natural foot movement based entirely on the contraction of the plantar flexor muscles is used. The bones, ligaments, articular cartilage, muscles, tendons, as well as the rest soft tissues of human foot and lower leg are included in the model. A realistic three-dimensional continuum constitutive model that describes the biomechanical behaviour of muscles and tendons is used. Both the active and passive properties of muscle tissue are accounted for. The materials for bones and ligaments are considered as homogeneous, isotropic and linearly elastic, whereas the articular cartilage and the rest soft tissues (mainly fat) are defined as hyperelastic materials. The model is used to estimate muscle tissue deformations as well as stresses and strains that develop in the lower leg muscles during plantar flexion of the ankle. Stresses and strains that develop in Achilles tendon during such a movement are also investigated.     

Symmetric multilayer megampere X-pinch

Raising the power of X-ray emission from an X-pinch by increasing the pinch current to the megampere level requires the corresponding increase in the initial linear mass of the load. This can be achieved by increasing either the number of wires or their diameter. In both cases, special measures should be undertaken to prevent the formation of a complicated configuration with an uncontrolled spatial structure in the region of wire crossing, because such a structure breaks the symmetry of the neck formed in the crossing region, destabilizes plasma formation, and degrades X-ray generation. To improve the symmetry of the wire crossing region, X-pinch configurations with a regular multilayer arrangement of wires in this region were proposed and implemented. The results of experiments with various symmetric X-pinch configurations on the COBRA facility at currents of ∼1MA are presented. It is shown that an X-pinch with a symmetric crossing region consisting of several layers of wires made of different materials can be successfully used in megampere facilities. The most efficient combinations of wires in symmetric multilayer X-pinches are found in which only one hot spot forms and that are characterized by a high and stable soft X-ray yield.     

Regional body composition changes in women after 6 months of periodized physical training.

Data are lacking regarding regional morphological changes among women after prolonged physical training. This study employed dual-energy X-ray absorptiometry to assess changes in whole body and regional (i.e., trunk, legs, arms) fat mass, lean mass, and bone mineral content body composition adaptations in 31 healthy women pre-, mid-, and post-6 mo of periodized physical training. These results were compared with those of 1) a control group of women who had not undergone the training program and were assessed pre- and post-6 mo and 2) a group of 18 men that was tested only once. Additionally, magnetic resonance imaging was used to assess changes in muscle morphology of the thigh in a subset of 11 members of the training group. Physical training consisted of a combination of aerobic and resistance exercise in which the subjects engaged for 5 days/wk for 24 wk. Overall, the training group experienced a 2.2% decrease, a 10% decrease, and a 2.2% increase for body mass, fat mass, and soft tissue lean mass, respectively. No changes in bone mineral content were detected. The women had less of their soft tissue lean mass distributed in their arms than did the men, both before and after the women were trained. Novel to this study were the striking differences in the responses in the tissue composition of the arms (31% loss in fat mass but no change in lean mass) compared with the legs (5.5% gain in lean mass but no change in fat mass). There was a 12% fat loss in the trunk with no change in soft tissue lean mass. Dual-energy X-ray absorptiometry and magnetic resonance imaging fat mass measurements showed good agreement (r = 0. 72-0.92); their lean mass measurements were similar as well, showing approximately 5.5% increases in leg lean tissue. These findings show the importance of considering regional body composition changes, rather than whole body changes alone when assessing the effects of a periodized physical training program.     

Complex plasmas IV: Theoretical approaches to complex plasmas and their application

This paper completes a series of reviews devoted to the physics of complex plasmas, in which one of the components (dust) is in a crystalline or liquid state, while the others (electron, ions, and neutral atoms) are in a gaseous state. This review is devoted to the theoretical approaches used to describe complex plasmas so far. The main theoretical developments have been concentrated in the gaseous and weakly nonideal states of complex plasmas. Here, we describe the achievements in the new kinetic and new hydrodynamic approaches to complex plasmas. At present, only generalizations of the van der Waals approach for complex plasmas have been used to describe phase transitions and plasma condensation in complex plasmas. Here, criteria for transitions are described and compared with the existing experimental observations. Theoretical and numerical results for nonlinear structures, such as dust layers, dust voids, dust sheaths, and dust convective vortices, obtained by solving the stationary balance equations, are also discussed and compared with state-of-the-art experiments. At present, experiments in this field are progressing very fast, while theory is not advancing at the same rate of development. To further develop new theoretical models, one can use the elementary physical processes in complex plasmas described in the previous parts of the review. However, the detailed comparison of theory and experiments also needs more detailed experimental diagnostics of the phenomena observed. In the concluding part of our review, the trends in experiment and theory, as well as some existing applications, including industrial, environmental, and astrophysical ones, are described.