Significantly improved esterase activity of Trichosporon brassicae cells for ketoprofen resolution by 2-propanol treatment

The kinetic resolution of racemic ketoprofen was carried out by enantioselective hydrolysis of ketoprofen ethyl ester using intact cells of Trichosporon brassicae CGMCC0574 as a biocatalyst. After the yeast cells were pretreated by 2 vol.% of 2-propanol for 10 h, the esterase activity on the (S)-ketoprofen ester increased dramatically, by a factor of ca. 310% without reducing the enantioselectivity of enzymatic resolution.     

Catalytic performance of a highly enantioselective (R)-ester hydrolase from a new isolate Acinetobacter sp. CGMCC 0789

A highly enantioselective (R)-ester hydrolase was partially purified from a newly isolated bacterium, Acinetobacter sp. CGMCC 0789, whose resting cells exhibited a highly enantioselective activity toward the acetate of (4R)-hydroxy-3-methyl-2-(2-propynyl)- cyclopent-2-enone (R-HMPC). The optimum pH and temperature of the partially purified enzyme were 8.0 and 60 °C, respectively. The enantioselectivity of the crude enzyme was increased by 1.2-fold from 16 to 20 when the reaction temperature was raised from 30 to 60 °C. The activity of the crude enzyme was enhanced by 4.1-fold and the enantioselectivity (E-value) was markedly enhanced by 4.3-fold from 16 to 68 upon addition of a cationic detergent, benzethonium chloride [(diisobutyl phenoxyethoxyethyl) dimethyl benzylammoniom chloride]. The hydrolysis of 52 mM (R,S)-HMPC acetate to (R)-HMPC was completed within 8 h, with optical purity of 91.4% ee_p and conversion of 49%.     

Resolution of N-(2-ethyl-6-methylphenyl) alanine catalyzed by Lipase B from Candida antarctica

A biotransformation process has been developed for the production of (S)-N-(2-ethyl-6-methylphenyl) alanine by enantioselective hydrolysis of racemic methyl ester in the presence of Candida antarctica lipase B (CAL-B). However, the enantioselectivity of CAL-B towards the resolution is not high enough to obtain enantiomerically pure product. In order to improve the enantioselectivity of the enzyme, the effects of surfactants on CAL-B-catalyzed hydrolysis were tested. The results suggest that surfactants can influence the microenvironment of the enzyme, and the addition of Tween-80, in particular, to the reaction medium markedly enhanced the selectivity of CAL-B towards the substrate used, with the enantiomeric ratio (E-value) increasing from 11.3 to 60.1.     

Lipase-catalyzed kinetic resolutions of racemic β- and γ-thiolactones

Several racemic β- and γ-thiolactones were synthesized and kinetic resolutions of them were executed using lipases. While a lipase from Pseudomonas cepacia (PCL) showed the highest enantioselectivity for (S)-form (>99% ee_S at 53% conversion, E > 100) in the kinetic resolution of racemic -methyl-β-propiothiolactone (rac-MPTL), it showed no hydrolysis activity in the kinetic resolution of -benzyl--methyl-β-propiothiolactone (rac-BMPTL), suggesting that the changes in the size of alkyl group from rac-MPTL to rac-BMPTL leads to lower hydrolysis activity and enantioselectivity. In contrast, racemic γ-butyrothiolactones were hydrolyzed by several lipases with low enantioselectivity, whereas a lipase from Candida antarctica (CAL) showed moderate enantioselectivity for (S)-form (>99% ee_S at 76% conversion, E = 11) in the kinetic resolution of racemic -methyl-γ-butyrothiolactone (rac-MBTL). Computer-aided molecular modeling was also performed to investigate the enantioselectivites and activities of PCL toward β-propiothiolactones. The computer modeling results suggest that the alkyl side chains of β-propiothiolactones and γ-butyrothiolactones interact with amino acid residues around hydrophobic crevice, which affects the activity of PCL.     

Biochemical properties and potential applications of an organic solvent-tolerant lipase isolated from Serratia marcescens ECU1010

An extracellular lipase was purified to homogeneity with a purification factor of 5.5-fold from a bacterial strain Serratia marcescens ECU1010. The purified lipase is a dimer with two homologous subunits, of which the molecular mass is 65 kDa, and the pI is 4.2. The pH and temperature optima were shown to be pH 8.0 and 45 °C, respectively. Among p-nitrophenyl esters of fatty acids with varied chain length, the lipase showed the maximum activity on p-nitrophenyl myristate (C₁₄). The lipase was activated by some surfactants such as Gum Arabic, polyvinyl alcohol (PVA) and Pg350me, but not by Ca²⁺. The enzyme displayed pretty high stability in many water miscible and immiscible solvents. This is a unique property of the enzyme which makes it extremely suitable for chemo-enzymatic applications in non-aqueous phase organic synthesis including enantiomeric resolution. Several typical chiral compounds were tested for kinetic resolution with this lipase, consequently giving excellent enantioselectivities (E = 83 >100) for glycidyl butyrate (GB), 4-hydroxy-3-methyl-2-(2-propenyl)-2-cyclopenten-1-one acetate (HMPCA), naproxen methyl ester (NME) and trans-3-(4′-methoxyphenyl) glycidic acid methyl ester (MPGM).     

Increased enantioselectivity in the enzymatic hydrolysis of amino acid esters in the ionic liquid 1-butyl-3-methyl-imidazolium tetrafluoroborate

The initial rate and enantioselectivity of enzymatic asymmetric hydrolysis of amino acid esters were examined in methylimidazolium-based ionic liquids with anions including tetrafluoroborate, chloride, bromide and bisulfate and in typical organic solvents. Papain displayed much higher enantioselectivity but lower activity in phosphate buffer solution of 1-butyl-3-methylimidazolium tetrafluoroborate BMIM·BF₄ than in other media tested (i.e. E=100, V ₀=0.21 mM min^-1 in BMIM·BF₄, E=2, V ₀=0.43 mM min^-1 in phosphate buffer, E=14-92, V ₀=0.22-0.25 mM min^-1 in organic solvents for D,L-phenylglycine methyl ester). The influence of BMIM·BF₄ on enzyme activity and enantioselectivity also varied with the substrate and the enzyme used. All of the enzymes assayed showed no activity or low enantioselectivity in the ILs with anions including chloride, bromide and bisulfate.     

Isolation of an esterase-producing Trichosporon brassicae and its catalytic performance in kinetic resolution of ketoprofen

A yeast strain CGMCC 0574, identified as Trichosporon brassicae, was selected from 92 strains for its high (S) selectivity in the hydrolysis of ketoprofen ethyl ester. The effective strains of the microorganisms were isolated from soil samples with the ester as the sole carbon source. The ethyl ester proved to be the best substrate for resolution of ketoprofen among several ketoprofen esters examined. The resting cells of CGMCC 0574 could catalyze the hydrolysis of ketoprofen ethyl ester with an enantiomeric ratio of 44.9, giving (S)-ketoprofen an enantiomeric excess of 91.5% at 42% conversion.     

Modulation of Mucor miehei lipase properties via directed immobilization on different hetero-functional epoxy resins: Hydrolytic resolution of (R,S)-2-butyroyl-2-phenylacetic acid

Purified lipase from Mucor miehei (MML) has been covalently immobilized on different epoxy resins (standard hydrophobic epoxy resins, epoxy-ethylenediamine, epoxy-iminodiacetic acid, epoxy-copper chelates) and adsorbed via interfacial activation on octadecyl-Sepabeads support (fully coated with very hydrophobic octadecyl groups). These immobilized enzyme preparations were used under slightly different conditions (temperature ranging from 4 to 25 °C and pH values from 5 to 7) in the hydrolytic resolution of (R,S)-2-butyroyl-2-phenylacetic acid.

Different catalytic properties (activity, specificity, enantioselectivity) were found depending on the particular support used. For example, the epoxy-iminodiacetic acid-Sepabeads gave the most active preparation at pH 7 while, at pH 5, the ethylenediamine-Sepabeads was superior.

More interestingly, the enantiomeric ratio (E) also depends strongly on the immobilized preparation and the conditions employed. Thus, the octadecyl-MML preparation was the only immobilized enzyme derivative which exhibited enantioselectivity towards R isomer (with E values ranging from 5 at 4 °C and pH 7 to 1.2 at pH 5 and 25 °C).

The other immobilized preparations, in contrast, were S selective. Immobilization on iminodiacetic acid-Sepabeads afforded the catalyst with the highest enantioselectivity (E=59 under optimum conditions).     

Biocatalytic resolution of nitro-substituted phenoxypropylene oxides with Trichosporon loubierii epoxide hydrolase and prediction of their enantiopurity variation with reaction time

Biocatalytic resolution of 3-(2′-nitrophenoxy)propylene oxide (1a), 3-(3′-nitrophenoxy)propylene oxide (1b) and 3-(4′-nitrophenoxy)propylene oxide (1c) were exploited by using lyophilized cells of yeast Trichosporon loubierii ECU1040 with epoxide hydrolase (EH) activity, which preferentially hydrolyzes (S)-enantiomers of the epoxides (1a–c), yielding (S)-diols and (R)-epoxides. The activity increased as the nitro group in the phenyl ring was shifted from 4′-position (1c) to 2′-position (1a). When the substrate concentration of 1a was increased from 10 to 80 mM, the E-value increased at first, until reaching a peak at 40 mM, and then decreased at higher concentrations (>40 mM). The optically active epoxide (R)-1a was prepared at gram-scale (97% ee, 41% yield). Furthermore, a simple method was developed to predict the enantiomeric excess of substrate (ee_s) at any time of the whole reaction course based on the ee_s value determined at a certain reaction time at a relatively lower substrate concentration. This will be helpful for terminating the reaction at a proper time to get both higher optical purity and higher yield of the remaining epoxides.     

Preparation of S-( )-ketoprofen by coupling the enantioselective hydrolysis of ketoprofen methyl ester with the photo-oxidation of methanol

A novel method for preparation of S-(+)-ketoprofen is presented involving coupling enantioselective hydrolysis of ketoprofen methyl ester catalyzed by a surfactant-coated-lipase with the photo-oxidation of methanol in a water-saturated organic solvent. The effect of photocatalytic conversion of methanol into water and carbon dioxide on the hydrolysis of ketoprofen methyl ester and the stability of the enzyme was investigated. The photo-oxidation of methanol shifted the equilibrium of the hydrolysis toward the formation of ketoprofen, increasing the equilibrium conversion ratio and improving the enantioselectivity. Because the surfactant-coated lipase and ketoprofen methyl ester dissolved in the organic solvent and ketoprofen was absorbed on the TiO₂ photocatalyst particles, the separation procedures could be simplified and the stability of the enzyme was increased.     

酵母脂肪酶分子进化及催化合成(S)-1,4-苯并二口恶烷*

Objective: 1,4-Benzodioxane is an important chiral intermediate for antihypertensive (Proroxan and Doxazosin), antidepressant (MCK-242) and other drugs, and it displays a broad spectrum of applications in the pharmaceutical field. Currently, in spite of high-yield advantage of chemical synthesis, there are some problems of environmental pollution and low production safety. Using lipase to catalyze synthesis of 1,4-benzodioxane provides a new pathway of green synthesis of 1,4-benzodioxane. However, natural enzymes face the dilemma of poor enantioselectivity. Therefore, molecular evolution was performed on Candida antarctica lipase B, and a technical route for the catalytic synthesis of 1,4-benzodioxane was established. Methods: Firstly, the key amino acid residues involved in substrate binding and conversion in the active center of Candida antarctica lipase B were analyzed, and saturation mutagenesis libraries on the interaction sites were constructed. Improved mutants with high efficiency and high enantioselectivity were then obtained using HPLC detection. Furthermore, catalytic synthesis conditions of mutant D223N/A225K were systematically optimized. Results: The results indicated that the mutants mainly derived from the pairwise site D223/A225 (such as D223N/A225K and D223G/A225W) were biased towards the synthesis of (S)-isoforms, while most of the mutants derived from the pairwise site E188/I189 (such as E188D/I189M) showed a bias for the synthesis of (R)-isoforms. Compared with WT, the ee_s value of the best mutant D223N/A225K to synthesize (S)-1,4-benzodioxane was increased from 11.9% to 29.3%. After systematic optimization of the reaction conditions, an ee_s value of (93.9±0.16)% and a conversion rate of (47.5±2.33)% were achieved using mutant D223N/A225K to catalyze kinetic resolution of methyl (R,S)-2,3-dihydro-1,4-benzodioxin-2-carboxylate in n-butanol/phosphate buffered saline (20∶80, V/V) biphasic solvent at 37℃ for 50 min. Conclusion: An efficient kinetic resolution of methyl (R,S)-2,3-dihydro-1,4-benzodioxin-2-carboxylate was successfully achieved by molecular evolution and optimization of conditions, which provides a new example for the creation of new enzymes by protein engineering technology, and also provides a theoretical and technical foundation for the efficient synthesis of (S)-1,4-benzodioxane molecules by enzymatic methods.     

Kinetic and modelling studies on the lipase catalysed enantioselective esterification of (±)-perillyl alcohol

Several lipases were kinetically studied with the aim to exploit their enantioselectivity in the esterification of (S)-(−) and (R)-(+)-perillyl alcohol with decanoic acid. Most of the lipases studied exhibited stereopreference towards the R-enantiomer with apparent E-values from 3.8 to 0.6, calculated as the initial esterification rates ratio for the individual enantiomers. In an attempt to interpret the structural basis of enantioselectivity, modelling studies were performed with two of these lipases, Candida cylindracea lipase (CcL) and Pseudomonas cepacia lipase (PcL) based on their previously determined X-ray crystal structures. The results derived from modelling studies confirm their stereopreferences towards the R-enantiomer, since increased conformational energy of the S-ester was found compared to the R-ester.     

Covalent immobilization of pure isoenzymes from lipase of Candida rugosa

Covalent immobilization of pure lipases A and B from Candida rugosa on agarose and silica is described. The immobilization increases the half-life of the biocatalysts ( ) with respect to the native pure lipases ( ). The percentage immobilization of lipases A and B is similar in both supports (33–40%). The remaining activity of the biocatalysts immobilized on agarose (70–75%) is greater than that of the enzymatic derivatives immobilized on SiO₂ (40–50%). The surface area and the hydrophobic/hydrophilic properties of the support control the lipase activity of these derivatives. The thermal stability of the immobilized lipase A derivatives is greater than that of lipase B derivatives. The nature of the support influences the thermal deactivation profile of the immobilized derivatives. The immobilization in agarose (hydrophilic support) gives biocatalysts that show a greater initial specific reaction rate than the biocatalysts immobilized in SiO₂ (hydrophobic support) using the hydrolysis of the esters of (R) or (S) 2-chloropropanoic and of (R,S) 2-phenylpropanoic acids as the reaction test. The enzymatic derivatives are active for at least 196 h under hydrolysis conditions. The stereospecificity of the native and the immobilized enzymes is the same.     

Enantioselective lipase-catalyzed kinetic resolution of N-(2-ethyl-6-methylphenyl)alanine

The enzyme (BSL2), a highly active lipase expressed from newly constructed strain of Bacillus subtilis BSL2, is used in the kinetic resolution of N-(2-ethyl-6-methylphenyl)alanine from the corresponding racemic methyl ester. Reaction conditions are optimized to enhance the enantioselectivity. The effects of various racemic alkyl esters, substrate concentration, operating temperature, pH of the aqueous medium and organic solvents on activity and enantioselectivity of BSL2 for kinetic resolution are also studied. A high enantiomeric ratio (E = 60.7) is reached in diisopropyl ether/water (10%, v/v) and the enantioselectivity is about 22-fold higher than that in pure buffered aqueous solution. The results show that the reaction medium greatly influences BSL2 reaction and its enantioselectivity in the hydrolysis of racemic methyl ester.     

Lipase-catalyzed enantioselective hydrolysis of methyl 2-fluoro-2-arylpropionates in water-saturated isooctane

Lipases from Candida rugosa, Candida antartica B and Carica papaya are employed as the biocatalyst for the hydrolytic resolution of methyl 2-fluoro-2-arylpropionates in water-saturated isooctane, in which excellent to good enantioselectivity without the formation of byproducts is obtained for the papaya lipase when using (R,S)-2-fluoronaproxen methyl ester (1) and methyl (R,S)-2-fluoro-2-(4-methoxyphenyl)propionate (2), but not methyl (R,S)-2-fluoro-2-(naphth-1-yl)propionate (3) as the substrates. The thermodynamic analysis indicates that the enantiomer discrimination for the papaya lipase is driven by the difference in activation enthalpy for compound 1, 2 or (R,S)-naproxen methyl ester (4). The kinetic analysis also demonstrates that in comparison with (S)-4, the insertion of the 2-fluorine moiety in (R)-1 has increased k₂, but not K_m, and consequently the lipase activity.     

Resolution of 1,3-dioxolane derivatives using the lipase from an Acinetobacter junii SY-01

Acinetobacter junii SY-01 producing a lipase enantioselectively hydrolyzing 1,3-dioxolane derivatives was isolated from water sludge sample and the effect of solvent, acyl donor, vinyl acetate concentration, substrate concentration, operating temperature and immobilization on activity and enantioselectivity was studied for the resolution of 1,3-dioxolane derivatives through transesterification reaction using a lipase from the isolated strain. Best selectivity was obtained at lower substrate concentration (3–5 mM), higher vinyl acetate concentration (500–1000 mM) and lower temperature (30–40 °C) in the reaction mixture. Lipase immobilized onto Accurel MP-1000 (micro-porous polypropylene) gave the best results and the reactivity was about 29-fold higher than the free enzyme without the decrease of enantioselectivity. Resolution of 1,3-dioxolane derivatives was carried out in flask scale containing 100 ml solvents using the lipase immobilized onto Accurel MP-1000. In this reaction, the yield and enantiomeric excess of the remaining (2R, 4S)-alcohol were 31.2% and 98.2%, respectively. This result suggests that it can be used as an alternative method, compared to the present synthetic method, for the production of optically pure (2R, 4S)-itraconazole.     

Enzymatic resolution of (R, S)-Naproxen in water-saturated ionic liquid

A water-saturated ionic liquid has been exploited for resolution of (R, S)-Naproxen by lipase-catalyzed hydrolysis to enhance the conversion and facilitate product recovery. From the enantioselectivity and activity of lipase, water-saturated [bmim]PF₆ (1-butyl-3-methylimidazolium hexafluorophosphate) was selected as the best reaction medium. To prevent the dissolution of lipase in the ionic liquid, a weakly polar, amorphous multiporous silica YWG-C₆H₅ was used as a support for immobilization. The production of (S)-Naproxen was initially performed in a batch reactor containing 20 mL of substrate solution. After 72 h reaction, 98.2% enantiomeric excess of the (S)-Naproxen was obtained with 28.3% hydrolysis conversion. The unconventional solvent properties of ionic liquids have been exploited in reaction medium recycling, product recovery and water recruiting schemes. In a repetitive batch reaction system, the immobilized lipase could be repeatedly used for 5 times with only a slight reduction in reaction conversion.     

Microfluidic separation of (S)-ibuprofen using enzymatic reaction

This study was investigated for the enantioselective separation of (S)-ibuprofen using the ionic liquid in the microfluidic device. A stable and thin ionic liquid flow (ILF) was made by controlling the flow rate of the ILF in the microfluidic channel. In addition, coupling lipase as a biocatalyst with the ILF based on the microfluidic device showed the facilitative and selective transport of (S)-ibuprofen across the ILF, indicating successful optical resolution of a racemic mixture. Subsequently, the enantioselectivity was evaluated in the transport ratio (η) of (R)- and (S)-ibuprofen, the optical resolution ratio () and enantiomeric excess of (S)-ibuprofen (ee_S).     

Biocatalyst engineering exerts a dramatic effect on selectivity of hydrolysis catalyzed by immobilized lipases in aqueous medium

It has been found that enantioselectivity of lipases is strongly modified when their immobilization is performed by involving different areas of the enzyme surface, by promoting a different degree of multipoint covalent immobilization or by creating different environments surrounding different enzyme areas. Moreover, selectivity of some immobilized enzyme molecules was much more modulated by the experimental conditions than other derivatives. Thus, some immobilized derivatives of Candida rugosa (CRL) and C. antarctica-B (CABL) lipases are hardly enantioselective in the hydrolysis of chiral esters of (R,S)-mandelic acid under standard conditions (pH 7.0 and 25°C) (E<2). However, other derivatives of the same enzymes exhibited a very good enantioselectivity under nonstandard conditions. For example, CRL adsorbed on PEI-coated supports showed a very high enantio-preference towards S-isomer (E=200) at pH 5. On the other hand, CABL adsorbed on octyl-agarose showed an interesting enantio-preference towards the R-isomer (E=25) at pH 5 and 4°C. These biotransformations are catalyzed by isolated lipase molecules acting on fully soluble substrates and in the absence of interfacial activation against external hydrophobic interfaces. Under these conditions, lipase catalysis may be associated to important conformational changes that can be strongly modulated via biocatalyst and biotransformation engineering. In this way, selective biotransformations catalyzed by immobilized lipases in macro-aqueous systems can be easily modulated by designing different immobilized derivatives and reaction conditions.     

Lipase-catalyzed production of optically active (S)-flurbiprofen in aqueous phase reaction system containing chiral succinyl β-cyclodextrin

The lipase-catalyzed production of optically active (S)-flurbiprofen was carried out in a dispersion reaction-system induced by chiral succinyl β-cyclodextrin (suβ-CD). The optimal reaction conditions were 500 mM (R,S)-flurbiprofen ethyl ester ((R,S)-FEE), 600 units of Candida rugosa lipase per 1 mmol of (R,S)-FEE, and 1000 mM suβ-CD at 37 °C for 72 h. An extremely high enantiomeric excess of 0.98 and conversion yield of 0.48 were achieved in the dispersed aqueous phase reaction system containing chiral suβ-CD added as a dispenser and chiral selector. The inclusion complex formability of the immiscible substrate (S)- and (R)-form of FEE with suβ-CD was compared using a phase-solubility diagram, DSC, and ¹H NMR. (S)-Isomer formed a more stable and selective inclusion complex with chiral suβ-CD. It was hydrolyzed much more selectively by lipase from C. rugosa, due to the selective structural modification through inclusion complexation with chiral suβ-CD.