Construction of an improved amperometric acrylamide biosensor based on hemoglobin immobilized onto carboxylated multi-walled carbon nanotubes/iron oxide nanoparticles/chitosan composite film

A method is described for construction of an improved amperometric acrylamide biosensor based on covalent immobilization of hemoglobin (Hb) onto nanocomposite of carboxylated multi-walled carbon nanotubes (cMWCNT) and iron oxide nanoparticles (Fe₃O₄NPs) electrodeposited onto Au electrode through chitosan (CHIT) film. The Hb/cMWCNT-Fe₃O₄NP/CHIT/Au electrode was characterized by scanning electron microscopy, Fourier transform infra-red spectroscopy, electrochemical impedance spectroscopy, and differential pulse voltammetry at different stages of its construction. The biosensor was based on interaction between acrylamide and Hb, which led to decrease in the electroactivity of Hb, i.e., current generated during its reversible conversion [Fe(II)/Fe(III)]. The biosensor showed optimum response within 8 s at pH 5.0 and 30 °C. The linear working range for acrylamide was 3–90 nM, with a detection limit of 0.02 nM and sensitivity of 36.9 μA/nM/cm². The biosensor was evaluated and employed for determination of acrylamide in potato crisps.     

Nano-Au/cMWCNT Modified <Emphasis Type="Italic">speB</Emphasis> Gene Specific Amperometric Sensor for Rapidly Detecting <Emphasis Type="Italic">Streptococcus pyogenes</Emphasis> causing Rheumatic Heart Disease

A specific 5′ NH₂ labeled DNA probe of speB gene was immobilized onto the gold nanoparticles/carboxylated multi walled carbon nanotubes (Nano-Au/cMWCNT) screen printed electrode using EDC/NHS cross linking chemistry. This was followed by hybridization with 0.5–50 ng/6 µl of single stranded genomic DNA Streptococcus pyogenes infected patient throat swab samples. Electrochemical amperometric assay was deciphered by using cyclic voltammetry (CV) with methylene blue a redox indicator. The sensor had a sensitivity of 104.7 µA cm^?2 ng^?1 using CV with a R² of 0.907 and 0.01 ng/6 µl as the limit of detection (LOD). The modified electrode surface morphology was characterized using scanning electron microscopy. The stability of the electrode was seen at 4 °C for 180 days having 6% loss in the initial current. The sensor is speB gene specific and can detect the pathogen within 30 min.     

Voltammetric detection of anti-HIV replication drug based on novel nanocomposite gold-nanoparticle–CaCO<Subscript>3</Subscript> hybrid material

A novel bionanocomposite, horse radish peroxidase- gold-nanoparticle–Calcium carbonate (HRP-AuNPs-CaCO₃), hybrid material was encapsulated by silica sol on a glassy carbon electrode (GCE). The fabricated modified electrode was used as a novel voltammetric sensor for electrochemical sensing of anti-HIV replication drug i.e. deferiprone. The surface morphology of the modified electrode was characterized by scanning electron microscopy (SEM). Results obtained from the voltammetric measurements show that HRP-AuNPs-CaCO₃ modified GCE offers a selective and sensitive electrochemical sensor for the determination of deferiprone. Under experimental conditions, the proposed voltammetric sensor has a linear response range from 0.01 to 10,000 μM with a detection limit of 0.01 μM. Furthermore, the fabricated sensor was successfully applied to determine deferiprone level in spiked urine and serum samples.     

Development of electrochemical sulfite biosensor based on SOX/PBNPs/PPY modified Au electrode

A sulfite oxidase (SO_X) (EC 1.8.3.1) purified from Syzygium cumini leaves was immobilized onto Prussian blue nanoparticles/polypyrrole (PBNPs/PPY) nanocomposite film electrodeposited onto the surface of gold (Au) electrode. An electrochemical sulfite biosensor was fabricated using SO_X/PBNPs/PPY/Au electrode as working electrode, Ag/AgCl as standard electrode and Pt wire as auxiliary electrode connected through a potentiostat. The working electrode was characterized by Fourier Transform infrared (FTIR) spectroscopy, cyclic voltammetry (CV), scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS) at different stages of its construction. The biosensor showed optimum response within 2 s, when operated at 20 mV s⁻¹ in 0.1 M Tris–HCl buffer, pH 8.0 and at 30 °C. Linear range and minimum detection limit were 0.5–1000 μM and 0.1 μM (S/N = 3) respectively. The sensor was evaluated with 95.0% recovery of added sulfite in red wine samples and 1.9% and 3.3% within and between batch coefficients of variation respectively. There was a good correlation (r = 0.96) between red wine samples sulfite value by standard DTNB method and the present method. The sensor was employed for determination of sulfite level in red, white and rose wine samples. The enzyme electrode was used 300 times over a period of 4 months, when stored at 4 °C.     

Circadian methane oxidation in the root zone of rice plants

In the root zone of rice plants aerobic methanotrophic bacteria catalyze the oxidation of CH₄ to CO₂, thereby reducing CH₄ emissions from paddy soils to the atmosphere. However, methods for in situ quantification of microbial processes in paddy soils are scarce. Here we adapted the push–pull tracer-test (PPT) method to quantify CH₄ oxidation in the root zone of potted rice plants. During a PPT, a test solution containing CH₄ ± O₂ as reactant(s), Cl^? and Ar as nonreactive tracers, and BES as an inhibitor of CH₄ production was injected into the root zone at different times throughout the circadian cycle (daytime, early nighttime, late nighttime). After a 2-h incubation phase, the test solution/pore-water mixture was extracted from the same location and rates of CH₄ oxidation were calculated from the ratio of measured reactant and nonreactive tracer concentrations. In separate rice pots, O₂ concentrations in the vicinity of rice roots were measured throughout the circadian cycle using a fiber-optic sensor. Results indicated highly variable CH₄ oxidation rates following a circadian pattern. Mean rates at daytime and early nighttime varied from 62 up to 451 μmol l^?1 h^?1, whereas at late nighttime CH₄ oxidation rates were low, ranging from 13 to 37 μmol l^?1 h^?1. Similarly, daytime O₂ concentration in the vicinity of rice roots increased to up to 250% air saturation, while nighttime O₂ concentration dropped to below detection (<0.15% air saturation). Our results suggest a functional link between root-zone CH₄ oxidation and photosynthetic O₂ supply.     

Fabrication of an amperometric d-amino acid biosensor based on nickel hexacyanoferrate polypyrrole hybrid film deposited on glassy carbon electrode

A nickel hexacyanoferrate polypyrrole film was synthesized through an electrochemical two-step methodology leading to a very stable and homogenous robust hybrid film. A highly sensitive, specific and rapid amperometric d-amino acid biosensor was constructed by immobilizing d-amino acid oxidase on this film deposited over the surface of a glassy carbon electrode. The modified electrode was characterized by scanning electron microscopy, electrochemical impedance spectroscopy and Fourier transform infrared spectrophotometry. The biosensor showed optimum response within 1 s, when operated at 50 mV s^?1 in 0.01 M Tris HCl buffer, pH 7.0 at 30 °C. The biosensor exhibited excellent sensitivity with a detection limit of 1.5 µM (S/N = 3) for d-amino acids and wider linear range, 20–500 µM. Analytical recovery of added d-alanine (5 and 10 mM) in serum samples was 98.00 and 98.80 %, respectively. Within-batch and between-batch coefficients of variation in serum samples were 1.36 and 2.77 %, respectively. The enzyme electrode was used more than 50 times over 2 months, when stored at 4 °C. The proposed modified electrode exhibited sufficient mechanical and electrochemical stability and high sensitivity compared to earlier electrochemical d-amino acid biosensors. Interference by ascorbic acid and uric acid, the main interfering species in the biological samples, was negligible.     

Immobilization of lysine oxidase on a gold–platinum nanoparticles modified Au electrode for detection of lysine

A commercial lysine oxidase (LyOx) from Trichoderma viride was immobilized covalently onto gold nanoparticles (AuNPs) and platinum nanoparticles (PtNPs) electrodeposited onto Au electrode using 3-aminopropyltriethoxy silane (3-APTES) and glutaraldehyde cross linking chemistry. A lysine biosensor was fabricated using LyOx/3-APTES/AuNPs-PtNPs/Au electrode as a working electrode, Ag/AgCl (3 M KCl) as standard electrode and Pt wire as auxiliary electrode connected through a potentiostat. The enzyme electrode was characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The cumulative effect of AuNPs and PtNPs showed excellent electrocatalytic activity at low applied potential for detection of H₂O₂, a product of LyOx reaction. The sensor showed its optimum response within 4 s, when polarized at 0.2 V vs. Ag/AgCl in 0.1 M phosphate buffer, pH 7.5 at 30 °C. The linear range and detection limit of the sensor were 1.0–600 μM and 1.0 μM (S/N = 3), respectively. Biosensor measured lysine level in sera, milk and amino acid tablet, which correlated well with those by standard HPLC method. The enzyme electrode lost 50% of its initial activity after 200 uses over a period of 4 months.     

Biomimetic oxidase sensor based on functionalized surface of carbon nanotubes and iron prophyrins for catechol detection

A novel and highly stable biomimetic oxidase sensor system was designed for catehol detection. FePP used as biomimetic horseradish peroxidase (HRP) was immobilized onto modified multi-walled carbon nanotubes (MWCNTs). Functional groups such as –OH, –NH₂ and –COOH were introduced onto the surface of MWCNTs to provide biomimetic microenvironment for iron porphyrins (FePP). Stable biomimetic enzyme electrode has been developed to detect catechol as a simple, economical and efficient method. At optimal condition, the detection limit of OH-MWCNTs/FePP/Nafion was 3.754 × 10^− 6 M. After stored at − 4 °C for 35 days, the oxidation current value still maintained 98.3% of initial activity. In repetitive nature test, relative standard deviation (RSD) of oxidation current remained within 1.0% after ten consecutive measurements in the same concentration of catechol solution, while most of reported oxidase sensor was within 2.0% under the same condition.

     

Hydrogen peroxide sensor based on Prussian blue electrodeposited on (3-mercaptopropyl)-trimethoxysilane polymer-modified gold electrode

A hydrogen peroxide (H₂O₂) sensor was developed by electrodepositing Prussian blue (PB) on a gold electrode modified with (3-mercaptopropyl)-trimethoxysilane (MPS) polymer. The characterization of the self-assembled electrode was investigated by cyclic voltammetry and electrochemical impedance spectroscopy. The results of electrochemical experiments showed that such constructed sensor had a favorable catalytic ability to reduce H₂O₂. The MPS film on the modified gold electrode greatly enhanced the pH-adaptive range of PB. Large surface-to-volume ratio property of double-layer 2d-network MPS-modified PB electrode enabled stable and highly sensitive performance of the non-enzymatic H₂O₂ sensor. The linear range of H₂O₂ determined is from 2.0 × 10⁻⁶ to 2.0 × 10⁻⁴ mol L⁻¹ with a correlation coefficient of 0.9991 and a detection limit for H₂O₂ of 1.8 × 10⁻⁶ mol L⁻¹. The influences of the potentially interfering substances on the determination of H₂O₂ were investigated. This modified electrode exhibits a good selectivity and high sensitivity with satisfactory results.     

High Performance Flexible Supercapacitor Electrodes Composed of Ultralarge Graphene Sheets and Vanadium Dioxide

Little is known regarding the effect of the graphene lateral size on the electrochemical performance of hybrid graphene electrode. This work examines the electrochemical performance of a flexible hybrid supercapacitor electrode composed of ultralarge graphene oxide (UGO; mean lateral size of 47 ± 22 μm) and vanadium dioxide (VO₂) nanobelts, referring to a reference electrode composed of small scale graphene oxide (SGO; mean lateral size of 0.8 ± 0.5 μm) and VO₂.Thermal treatment converts UGO/VO₂ and SGO/VO₂ to URGO/VO₂ (denoted VURGO) and SRGO/VO₂ (denoted VSRGO) electrodes, respectively. The sheet resistance of the VURGO film (0.57 ± 0.03 kΩ sq.^–1) was two orders of magnitude lower than that of the VSRGO (55.74 ± 9.35 kΩ sq.^–1). The VURGO hybrid electrode showed a specific capacitance of 769 F g^?1, which was significantly better than the corresponding values for the VSRGO electrode (385 F/g). These results support the notion that the use of ultralarge graphene sheets (≈22 500 μm²) lowers the intersheet resistance due to the presence of fewer intersheet tunneling barriers. This article highlights the potential utility of URGO (as a conductive support) in hybrid electrode containing VO₂ nanobelts for high performance flexible hybrid supercapacitor.     

High Sensitivity in Ni-Based SPR Sensor of Blue Phosphorene/Transition Metal Dichalcogenides Hybrid Nanostructure

In the present work, a novel surface plasmon resonance (SPR) sensor consisting of the nickel (Ni) film with hybrid structure of blue phosphorene (BlueP)/transition metal dichalcogenides (TMDCs) is reported. By optimizing the thickness of Ni layer and BlueP/TMDCs, the maximum sensitivity with 270°/RIU for the Ni-BlueP/WS₂ is achieved. Use of BlueP/TMDCs layer facilitates the sensitivity due to its high electron concentration, high mobility, optical, and electronic properties. Compared with the conventional Ni-based SPR sensor, the sensitivity of the proposed one is enhanced up to ~ 60.7%. We hope that the SPR sensor has potential application prospects in chemical detection, medical diagnostic, optical sensing, etc. due to its high sensitivity.

     

Electrochemical behaviors of amino acids at multiwall carbon nanotubes and Cu2O modified carbon paste electrode

A carbon paste electrode modified with multiwall carbon nanotubes and copper(I) oxide (MWCNT-Cu₂O CPME) was fabricated, and the electrochemical behaviors of 19 kinds of natural amino acids at this modified electrode were studied. The experimental results showed that the various kinds of amino acids without any derivatization displayed obvious oxidation current responses at the modified electrode. It was also found that the current response values of amino acids were dependent mainly on pH values of buffer solutions. The phenomenon could be explained by the fact that the amino acids suffered complexation or electrocatalytic oxidation processes under different pH values. Six kinds of amino acids (arginine, tryptophan, histidine, threonine, serine, and tyrosine), which performed high-oxidation current responses in alkaline buffers, were selected to be detected simultaneously by capillary zone electrophoresis coupled with amperometric detection (CZE-AD). These amino acids could be perfectly separated within 20 min, and their detection limits were as low as 10⁻⁷ or 10⁻⁸ mol L⁻¹ magnitude (signal/noise ratio = 3). The above results demonstrated that MWCNT-Cu₂O CPME could be successfully employed as an electrochemical sensor for amino acids with some advantages of convenient preparation, high sensitivity, and good repeatability.     

Nafion/lead nitroprusside nanoparticles modified carbon ceramic electrode as a novel amperometric sensor for l-cysteine

This work describes the electrochemical and electrocatalytic properties of carbon ceramic electrode (CCE) modified with lead nitroprusside (PbNP) nanoparticles as a new electrocatalyst material. The structure of deposited film on the CCE was characterized by energy dispersive X-ray (EDX), Fourier transform infrared (FTIR), and scanning electron microscopy (SEM). The cyclic voltammogram (CV) of the PbNP modified CCE showed two well-defined redox couples due to [Fe(CN)₅NO]³⁻/[Fe(CN)₅NO]²⁻ and Pb^IV/Pb^II redox reactions. The modified electrode showed electrocatalytic activity toward the oxidation of l-cysteine and was used as an amperometric sensor. Also, to reduce the fouling effect of l-cysteine and its oxidation products on the modified electrode, a thin film of Nafion was coated on the electrode surface. The sensor response was linearly changed with l-cysteine concentration in the range of 1 × 10⁻⁶ to 6.72 × 10⁻⁵ mol L⁻¹ with a detection limit (signal/noise ratio [S/N] = 3) of 0.46 μM. The sensor sensitivity was 0.17 μA (μM)⁻¹, and some important advantages such as simple preparation, fast response, good stability, interference-free signals, antifouling properties, and reproducibility of the sensor for amperometric determination of l-cysteine were achieved.     

An amperometric uric acid biosensor based on multiwalled carbon nanotube-gold nanoparticle composite

An amperometric uric acid biosensor was fabricated by immobilizing uricase (EC 1.7.3.3) onto gold nanoparticle (AuNP)/multiwalled carbon nanotube (MWCNT) layer deposited on Au electrode via carbodiimide linkage. Determination of uric acid was performed by oxidation of enzymically generated H₂O₂ at 0.4 V. The sensor showed optimal response within 7 s at 40 °C in 50 mM Tris–HCl buffer (pH 7.5). The linear working range of the biosensor was 0.01–0.8 mM. The limit of detection (LOD) was 0.01 mM. The sensor measured uric acid levels in serum of healthy individuals and persons suffering from gout. The analytical recoveries of the added uric acid, 10 and 20 mg L^–1, were 98.0% and 96.5%, respectively. Within- and between-batch coefficients of variation were less than 5.6% and less than 4.7%, respectively. A good correlation (r = 0.998) was obtained between serum uric acid values by the standard enzymic colorimetric method and the current method. A number of serum substances had practically no interference. The sensor was used in more than 200 assays and had a storage life of 120 days at 4 °C.     

Sensing photosynthetic herbicides in an electrochemical flow cell

Specific inhibitory reactions of herbicides with photosynthetic reaction centers bound to working electrodes were monitored in a conventional electrochemical cell and a newly designed microfluidic electrochemical flow cell. In both cases, the bacterial reaction centers were bound to a transparent conductive metal oxide, indium-tin-oxide, electrode through carbon nanotubes. In the conventional cell, photocurrent densities of up to a few μA/cm² could be measured routinely. The photocurrent could be blocked by the photosynthetic inhibitor terbutryn (I ₅₀ = 0.38 ± 0.14 μM) and o-phenanthroline (I ₅₀ = 63.9 ± 12.2 μM). The microfluidic flow cell device enabled us to reduce the sample volume and to simplify the electrode arrangement. The useful area of the electrodes remained the same (ca. 2 cm²), similar to the classical electrochemical cell; however, the size of the cell was reduced considerably. The microfluidic flow control enabled us monitoring in real time the binding/unbinding of the inhibitor and cofactor molecules at the secondary quinone site.     

A nanocomposite/crude extract enzyme-based xanthine biosensor

A novel amperometric biosensor for xanthine was developed based on covalent immobilization of crude xanthine oxidase (XOD) extracted from bovine milk onto a hybrid nanocomposite film via glutaraldehyde. Toward the preparation of the film, a stable colloids solution of core–shell Fe₃O₄/polyaniline nanoparticles (PANI/Fe₃O₄ NPs) was dispersed in solution containing chitosan (CHT) and H₂PtCl₆ and electrodeposited over the surface of a carbon paste electrode (CPE) in one step. Scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectrophotometry, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) were used for characterization of the electrode surface. The developed biosensor (XOD/CHT/Pt NPs/PANI/Fe₃O₄/CPE) was employed for determination of xanthine based on amperometric detection of hydrogen peroxide (H₂O₂) reduction at –0.35 V (vs. Ag/AgCl). The biosensor exhibited a fast response time to xanthine within 8 s and a linear working concentration range from 0.2 to 36.0 μM (R² = 0.997) with a detection limit of 0.1 μM (signal/noise [S/N] = 3). The sensitivity of the biosensor was 13.58 μA μM⁻¹ cm⁻². The apparent Michaelis–Menten (K_m) value for xanthine was found to be 4.7 μM. The fabricated biosensor was successfully applied for measurement of fish and chicken meat freshness, which was in agreement with the standard method at the 95% confidence level.     

ELECTROCHEMICAL CYSTEINE DETERMINATION IN SERUM SAMPLES BY Hg THIN FILM SENSOR

Cysteine is a nonessential aminoacid, meaning that cysteine can be made in the human body. It is one of the few amino acids that contain sulfur. This allows cysteine to bond in a special way and maintain the structures of proteins in the body. Cysteine strengthens the protective lining of the stomach and intestines, which may help prevent damage caused by aspirin and similar drugs. In addition, cysteine may play an important role in the communication between immune system cells.

In this study, glassy carbon electrodes modified with mercury (Hg) were used as working electrode. Mercury thin film on glassy carbon electrode was deposited by holding the electrode potential at ?0.7 V; the measurement period for the coating process was 2 minutes. pH and temperature effects on the electrode response were carried out by working at different pHs and temperatures. The calibration graph for cysteine was drawn in the range of 5–120 μM cysteine. Repeatability and interferences studies were investigated. GSH had an interference effect of about 13% of cysteine response. Finally, the sensor was applied to real samples for cysteine determination and the method was validated by Ellman's reagent.     

Graphene‐amplified electrogenerated chemiluminescence of CdTe quantum dots for H2O2 sensing

Electrogenerated chemiluminescence (ECL) of thiol‐capped CdTe quantum dots (QDs) in aqueous solution was greatly enhanced by PDDA‐protected graphene (P‐GR) film that were used for the sensitive detection of H₂O₂. When the potential was cycled between 0 and ?2.3 V, two ECL peaks were observed at ?1.1 (ECL‐1) and ?1.4 V (ECL‐2) in pH 11.0, 0.1 M phosphate buffer solution (PBS), respectively. The electron‐transfer reaction between individual electrochemically‐reduced CdTe nanocrystal species and oxidant coreactants (H₂O₂ or reduced dissolved oxygen) led to the production of ECL‐1. While mass nanocrystals packed densely in the film were reduced electrochemically, assembly of reduced nanocrystal species reacted with coreactants to produce an ECL‐2 signal. ECL‐1 showed higher sensitivity for the detection of H₂O₂ concentrations than that of ECL‐2. Further, P‐GR film not only enhanced ECL intensity of CdTe QDs but also decreased its onset potential. Thus, a novel CdTe QDs ECL sensor was developed for sensing H₂O₂. Light intensity was linearly proportional to the concentration of H₂O₂ between 1.0 × 10^?5 and 2.0 x 10^‐7 mol L^?1 with a detection limit of 9.8 x 10^?8 mol L^?1. The P‐GR thin‐film modified glassy carbon electrode (GCE) displayed acceptable reproducibility and long‐term stability. Copyright © 2012 John Wiley & Sons, Ltd.     

Interactions between N application rate, CH4 oxidation and N2O production in soil

Here we report on a controlled environment experiment in which we applied ¹³C- and ¹⁵N-enrichment approaches to quantify methane oxidation rates and source partition N₂O production in a silt loam soil following application of NH₄NO₃, enabling us to look for potential interactions between methane oxidation and nitrifier-N₂O production. ¹⁵N-N₂O, ¹⁴⁺¹⁵N-N₂O and CO₂ fluxes and mineral N concentrations were measured over a 23-day period after application of NH₄NO₃ (5 at.% excess ¹⁵N) at rates of 0, 5, 10, 20, 30 and 40 g N m^?2 to a silt loam soil. Change in ^12/13C-CH₄ concentrations (as indicative of ¹³C-CH₄ oxidation rates) and production of ¹³C-CO₂ were monitored over the first 72 h after addition of 1.7 ??l ¹³C-CH₄ l^?1 (10 at.% excess ¹³C) to these N treatments. Oxidation of applied ¹³C-CH₄ was slower in the 5, 10, 20 and 30 g N m^?2 (5 at.% excess ¹⁵N) treatments (0.24?C0.32 ??g ¹³C-CH₄ l^?1 day^?1) than in the control (0.40 ??g ¹³C-CH₄ l^?1 day^?1), suggesting that these N loadings inhibited oxidation. N₂O production was raised after N addition, and in the 10, 20 and 30 g N m^?2 treatments nitrification was the predominant source of N₂O accounting for 61, 83 and 57% of the total ¹⁵N-N₂O produced, respectively. Our results point towards the possibility of methylotrophs switching function to oxidise ammonia in the presence of N, which may result in greater atmospheric loading of both CH₄ and N₂O.     

Process contribution evaluation for COD removal and energy production from molasses wastewater in a BioH<Subscript>2</Subscript>–BioCH<Subscript>4</Subscript>–MFC-integrated system

In this study, a three-stage-integrated process using the hydrogenic process (BioH₂), methanogenic process (BioCH₄), and a microbial fuel cell (MFC) was operated using molasses wastewater. The contribution of individual processes to chemical oxygen demand (COD) removal and energy production was evaluated. The three-stage integration system was operated at molasses of 20 g-COD L^?1, and each process achieved hydrogen production rate of 1.1 ± 0.24 L-H₂ L^?1 day^?1, methane production rate of 311 ± 18.94 mL-CH₄ L^?1 day^?1, and production rate per electrode surface area of 10.8 ± 1.4 g m^?2 day^?1. The three-stage integration system generated energy production of 32.32 kJ g-COD^?1 and achieved COD removal of 98 %. The contribution of BioH₂, BioCH₄, and the MFC reactor was 20.8, 72.2, and, 7.0 % of the total COD removal, and 18.7, 81.2, and 0.16 % of the total energy production, respectively. The continuous stirred-tank reactor BioH₂ at HRT of 1 day, up-flow anaerobic sludge blanket BioCH₄ at HRT of 2 days, and MFC reactor at HRT of 3 days were decided in 1:2:3 ratios of working volume under hydraulic retention time consideration. This integration system can be applied to various configurations depending on target wastewater inputs, and it is expected to enhance energy recovery and reduce environmental impact of the final effluent.