Evidence for functional laccases in the acidophilic ascomycete Hortaea acidophila and isolation of laccase-specific gene fragments

Hortaea acidophila is a pigmented, yeast-like ascomycete that is able to grow at a pH as low as 0.6. This study presents evidence that H. acidophila possesses at least two functional laccases that seem to be involved in melanin synthesis. This evidence is supported by PCR amplification of laccase-specific gene fragments by using primers derived from conserved copper-binding-regions and by Southern Blot analysis. Due to their low pH optimum the laccases may be of special interest for biotechnological use.     

Purification, characterization, molecular cloning, and expression of two laccase genes from the white rot basidiomycete Trametes villosa.

Two laccases have been purified to apparent electrophoretic homogeneity from the extracellular medium of a 2,5-xylidine-induced culture of the white rot basidiomycete Trametes villosa (Polyporus pinsitus or Coriolus pinsitus). These proteins are dimeric, consisting of two subunits of 63 kDa as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, and have typical blue laccase spectral properties. Under nondenaturing conditions, the two purified laccases have different pIs; purified laccase forms 1 and 3 have pIs of 3.5 and 6 to 6.5, respectively. A third purified laccase form 2 has the same N terminus as that of laccase form 3, but its pI is in the range of 5 to 6. The laccases have optimal activity at pH 5 to 5.5 and pH < or = 2.7 with syringaldazine and ABTS [2,2'-azinobis-(3-ethylbenzthiazoline-6-sulfonic acid)] as substrates, respectively. The genes lcc1 and lcc2 coding for the two purified laccases (forms 1 and 3) have been cloned, and their nucleotide sequences have been determined. The genes for lcc1 and lcc2 have 8 and 10 introns, respectively. The predicted proteins are 79% identical at the amino acid level. From Northern (RNA) blots containing total RNA from both induced and uninduced cultures, expression of lcc1 is highly induced, while the expression of lcc2 appears to be constitutive. Lcc1 has been expressed in Aspergillus oryzae, and the purified recombinant protein has the same pI, spectral properties, stability, and pH profiles as the purified native protein.     

Novel thermotolerant laccases produced by the white-rot fungus <Emphasis Type="Italic">Physisporinus rivulosus</Emphasis>

The white-rot basidiomycete Physisporinus rivulosus strain T241i is highly selective for degradation of softwood lignin, which makes this fungus suitable for biopulping. In order to promote laccase production, P. rivulosus was cultivated in nutrient-nitrogen sufficient liquid media containing either charcoal or spruce sawdust as supplements. Two laccases with distinct pI values, Lac-3.5 and Lac-4.8, were purified from peptone-spruce sawdust-charcoal cultures of P. rivulosus. Both laccases showed thermal stability at up to 60°C. Lac-4.8 was thermally activated at 50°C. Surprisingly, both laccases displayed atypically low pH optima (pH 3.0–3.5) in oxidation of the commonly used laccase substrates syringaldazine (4-hydroxy-3,5-dimethoxybenzaldehyde azine), 2,6-dimethoxyphenol and guaiacol (2-methoxyphenol). Steady-state kinetic measurements pointed to unusually low affinity to guaiacol at low pH, whereas the kinetic constants for the methoxyphenols and ABTS were within the ranges reported for other fungal laccases. The combination of thermotolerance with low pH optima for methoxylated phenol substrates suggests that the two P. rivulosus T241i laccases possess potential for use in biotechnological applications.     

High redox potential laccases from the ligninolytic fungi Pycnoporus coccineus and Pycnoporus sanguineus suitable for white biotechnology: from gene cloning to enzyme characterization and applications

Aims: Exploitation of natural biodiversity in species Pycnoporus coccineus and Pycnoporus sanguineus to screen for a new generation of laccases with properties suitable for the lignin‐processing sector. Methods and Results: Thirty strains originating from subtropical and tropical environments, mainly isolated from fresh specimens collected in situ, were screened for laccase activity. On the basis of levels of enzyme activity and percentage of similarity between protein sequences, the laccases from strains BRFM 938, BRFM 66 and BRFM 902 were selected for purification and characterization. Each BRFM 938, BRFM 66 and BRFM 902 laccase gene encoded a predicted protein of 518 amino acids; the three deduced proteins showed 68·7–97·5% similarity with other Polyporale laccases. The three laccases (59·5–62·9 kDa with 7–10% carbohydrate content) had high redox potentials (0·72–0·75 V vs normal hydrogen electrode at pH 6), remained highly stable up to 75–78°C and at pH 5–7 mixtures, and were resistant to methyl and ethyl alcohols, acetonitrile and dimethylsulfoxide at concentrations as high as 50% (v/v). The best laccase‐1‐hydroxybenzotriazole systems permitted almost 100% of various polyphenolic dye decolourization and oxidation of adlerol and veratryl alcohol. Conclusions: The three laccases showed complementary biochemical features. BRFM 938 laccase had the highest thermo‐ and pH stability, catalytic efficiency towards 2,2′‐azino‐bis‐[3‐ethylthiazoline‐6‐sulfonate] and resistance to alcoholic solvents. BRFM 66 laccase had the highest rates of dye decolourization and oxidation of nonphenolic compounds. Significance and Impact of the Study: This study identified P. coccineus and P. sanguineus as outstanding producers of high redox potential laccases, easy to purify and scale‐up for industrial production. Three new laccases proved to be suitable models for white biotechnology processes and for further molecular breeding to create a new generation of tailor‐made enzymes.     

A chloride tolerant laccase from the plant pathogen ascomycete Botrytis aclada expressed at high levels in Pichia pastoris

Fungal laccases from basidiomycetous fungi are thoroughly investigated in respect of catalytic mechanism and industrial applications, but the number of reported and well characterized ascomycetous laccases is much smaller although they exhibit interesting catalytic properties. We report on a highly chloride tolerant laccase produced by the plant pathogen ascomycete Botrytis aclada, which was recombinantly expressed in Pichia pastoris with an extremely high yield and purified to homogeneity. In a fed-batch fermentation, 495 mg L⁻¹ of laccase was measured in the medium, which is the highest concentration obtained for a laccase by a yeast expression system. The recombinant B. aclada laccase has a typical molecular mass of 61,565 Da for the amino acid chain. The pI is approximately 2.4, a very low value for a laccase. Glycosyl residues attached to the recombinant protein make up for approximately 27% of the total protein mass. B. aclada laccase exhibits very low K_M values and high substrate turnover numbers for phenolic and non-phenolic substrates at acidic and near neutral pH. The enzyme's stability increases in the presence of chloride ions and, even more important, its substrate turnover is only weakly inhibited by chloride ions (I₅₀ = 1.4 M), which is in sharp contrast to most other described laccases. This high chloride tolerance is mandatory for some applications such as implantable biofuel cells and laccase catalyzed reactions, which suffer from the presence of chloride ions. The high expression yield permits fast and easy production for further basic and applied research.     

Laccase of Cyathus bulleri: structural, catalytic characterization and expression in Escherichia coli

Cyathus bulleri, a ligninolytic fungus, produces a single laccase the internal peptides (3) of which bear similarity to laccases of several white rot fungi. Comparison of the total amino acid composition of this laccase with several fungal laccases indicated dissimilarity in the proportion of some basic and hydrophobic amino acids. Analysis of the circular dichroism spectrum of the protein indicated 37% alpha-helical, 26% beta-sheet and 38% random coil content which differed significantly from that in the solved structures of other laccases, which contain higher beta-sheet structures. The critical role of the carboxylic group containing amino acids was demonstrated by determining the kinetic parameters at different pH and this was confirmed by the observation that a critical Asp is strongly conserved in both Ascomycete and Basidiomycete laccases. The enzyme was denatured in the presence of a number of denaturing agents and refolded back to functional state with copper. In the folding experiments under alkaline conditions, zinc could replace copper in restoring 100% of laccase activity indicating the non-essential role of copper in this laccase. The laccase was expressed in Escherichia coli by a modification of the ligation-anchored PCR approach making it the first fungal laccase to be expressed in a bacterial host. The laccase sequence was confirmed by way of analysis of a 435 bp sequence of the insert.     

Extra- and Intracellular Laccases of the Chestnut Blight Fungus, Cryphonectria parasitica

A double-stranded RNA virus of the chestnut blight pathogen, Cryphonectria parasitica, has been shown previously to reduce accumulation of mRNAs of extracellular laccase (laccase A) produced by this fungus. Both extra- and intracellular laccases have been detected after growth of the fungus in liquid culture. In addition to cellular localization, the two laccases are distinguishable by time of appearance during growth and electrophoretic mobility. Laccase A was purified from the culture filtrate by standard protein purification procedures. The enzyme was characterized as a glycoprotein with a molecular mass of approximately 77 kDa. Both laccase A and laccase B activities were significantly reduced in the hypovirulent (double-stranded RNA-infected) strain UEP1 compared with the isogenic virulent (double-stranded RNA-free) strain EP155/2.     

Laccase isoforms with unusual properties from the basidiomycete Steccherinum ochraceum strain 1833

Aims: To isolate and characterize the laccase isoforms from S. ochraceum 1833 – a new active producer of high extracellular laccase activity. Methods and Results: Three laccase isoforms (laccases I, II and III) with 57·5, 59·5 and 63 kDa molecular masses respectively were purified from S. ochraceum 1833 and in contrast to the known laccases had strongly pronounced absorption at 611 nm with molar extinction coefficients ranging from 7170 to 7830 mol^?1 l cm^?1. All isoforms showed maximal activity with ABTS at low pH (≤2) and temperatures in the range 70–80°C, were stable for long time of incubation at high temperature (60–80°C) and at pH values ranging from 2 to 6. Laccase II showed a higher activity and wider substrate specificity. N‐terminal amino acid sequence analysis of the purified laccase II (VQIGPVTDLH) showed 80% identity with the N‐terminal amino acid sequence of laccase from Lentinula edodes [Appl Microbiol Biotechnol 60 (2002) 327]. Conclusions: Elevated temperature optima, high thermo‐ and pH‐stabilities, the broad substrate specificity of the isoforms make the laccases from S. ochraceum 1833 a suitable model for biotechnological processes proceeding at high temperatures. Significance and Impact of the Study: For the first time, new basidiomycete strain S. ochraceum was reported as a producer of novel thermostable, pH stable, acidophilic laccases with unusual spectral properties.     

Novel enzymatic oxidation of Mn2+ to Mn3+ catalyzed by a fungal laccase.

Fungal laccases are extracellular multinuclear copper-containing oxidases that have been proposed to be involved in ligninolysis and degradation of xenobiotics. Here, we show that an electrophoretically homogenous laccase preparation from the white rot fungus Trametes versicolor oxidized Mn2+ to Mn3+ in the presence of Na-pyrophosphate, with a Km value of 186 microM and a Vmax value of 0.11 micromol/min/mg protein at the optimal pH (5.0) and a Na-pyrophosphate concentration of 100 mM. The oxidation of Mn2+ involved concomitant reduction of the laccase type 1 copper site as usual for laccase reactions, thus providing the first evidence that laccase may directly utilize Mn2+ as a substrate.     

芽胞杆菌漆酶的研究进展

芽胞杆菌漆酶具有耐高温、适宜碱性条件的特性,是细菌漆酶的典型代表,其潜在工业化应用价值极高。枯草芽胞杆菌的芽胞外衣蛋白CotA是目前研究得最深入的细菌漆酶,其三维结构及催化机理与其他漆酶类似,但其催化部位的结构与其他漆酶差异较大。同时,近年来科研工作者们还发现了很多其他类型的芽胞杆菌漆酶。本文从结构特征、催化特性、酶学性质和应用四个方面阐述芽胞杆菌漆酶的特点及近年来的最新研究进展,并对其前景进行展望。     

Laccase isoenzymes of Pleurotus eryngii: characterization, catalytic properties, and participation in activation of molecular oxygen and Mn2+ oxidation.

Two laccase isoenzymes produced by Pleurotus eryngii were purified to electrophoretic homogeneity (42- and 43-fold) with an overall yield of 56.3%. Laccases I and II from this fungus are monomeric glycoproteins with 7 and 1% carbohydrate content, molecular masses (by sodium dodecyl sulfate-polyacrylamide gel electrophoresis) of 65 and 61 kDa, and pIs of 4.1 and 4.2, respectively. The highest rate of 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) oxidation for laccase I was reached at 65 degrees C and pH 4, and that for laccase II was reached at 55 degrees C and pH 3.5. Both isoenzymes are stable at high pH, retaining 60 to 70% activity after 24 h from pH 8 to 12. Their amino acid compositions and N-terminal sequences were determined, the latter strongly differing from those of laccases of other basidiomycetes. Antibodies against laccase I reacted with laccase II, as well as with laccases from Pleurotus ostreatus, Pleurotus pulmonarius, and Pleurotus floridanus. Different hydroxy- and methoxy-substituted phenols and aromatic amines were oxidized by the two laccase isoenzymes from P. eryngii, and the influence of the nature, number, and disposition of aromatic-ring substituents on kinetic constants is discussed. Although both isoenzymes presented similar substrate affinities, the maximum rates of reactions catalyzed by laccase I were higher than those of laccase II. In reactions with hydroquinones, semiquinones produced by laccase isoenzymes were in part converted into quinones via autoxidation. The superoxide anion radical produced in the latter reaction dismutated, producing hydrogen peroxide. In the presence of manganous ion, the superoxide union was reduced to hydrogen peroxide with the concomitant production of manganic ion. These results confirmed that laccase in the presence of hydroquinones can participate in the production of both reduced oxygen species and manganic ions.     

Heterologous expression and structural characterization of two low pH laccases from a biopulping white-rot fungus Physisporinus rivulosus

The lignin-degrading, biopulping white-rot fungus Physisporinus rivulosus secretes several laccases of distinct features such as thermostability, extremely low pH optima and thermal activation for oxidation of phenolic substrates. Here we describe the cloning, heterologous expression and structural and enzymatic characterisation of two previously undescribed P. rivulosus laccases. The laccase cDNAs were expressed in the methylotrophic yeast Pichia pastoris either with the native or with Saccharomyces cerevisiae α-factor signal peptide. The specific activity of rLac1 and rLac2 was 5 and 0.3 μkat/μg, respectively. However, mutation of the last amino acid in the rLac2 increased the specific laccase activity by over 50-fold. The recombinant rLac1 and rLac2 enzymes demonstrated low pH optima with both 2,6-dimethoxyphenol (2,6-DMP) and 2,2′-azino-bis(3-ethylbenzathiazoline-6-sulfonate). Both recombinant laccases showed moderate thermotolerance and thermal activation at +60 °C was detected with rLac1. By homology modelling, it was deduced that Lac1 and Lac2 enzymes demonstrate structural similarity with the Trametes versicolor and Trametes trogii laccase crystal structures. Comparison of the protein architecture at the reducing substrate-binding pocket near the T1-Cu site indicated the presence of five amino acid substitutions in the structural models of Lac1 and Lac2. These data add up to our previous reports on laccase production by P. rivulosus during biopulping and growth on Norway spruce. Heterologous expression of the novel Lac1 and Lac2 isoenzymes in P. pastoris enables the detailed study of their properties and the evaluation of their potential as oxidative biocatalysts for conversion of wood lignin, lignin-like compounds and soil-polluting xenobiotics.     

Screening for novel laccase-producing microbes

AIMS: To discover novel laccases potential for industrial applications. METHODS AND RESULTS: Fungi were cultivated on solid media containing indicator compounds that enabled the detection of laccases as specific colour reactions. The indicators used were Remazol Brilliant Blue R (RBBR), Poly R-478, guaiacol and tannic acid. The screening work resulted in isolation of 26 positive fungal strains. Liquid cultivations of positive strains confirmed that four efficient laccase producers were found in the screening. Biochemical characteristics of the four novel laccases were typical for fungal laccases in terms of molecular weight, pH optima and pI. The laccases showed good thermal stability at 60 degrees C. CONCLUSIONS: Plate-test screening based on polymeric dye compounds, guaiacol and tannic acid is an efficient way to discover novel laccase producers. The results indicated that screening for laccase activity can be performed with guaiacol and RBBR or Poly R-478. SIGNIFICANCE AND IMPACT OF THE STUDY: Laccases have many potential industrial applications including textile dye decolourization, delignification of pulp and effluent detoxification. It is essential to find novel, efficient enzymes to further develop these applications. This study showed that relatively simple plate test screening method can be used for discovery of novel laccases.     

Purification of a novel extracellular laccase from solid-state culture of the edible mushroom <Emphasis Type="Italic">Lentinula edodes</Emphasis>

The laccases (EC 1.10.3.2) secreted into solid-state culture by Lentinula edodes were analyzed. The fungus secreted at least two laccases in the solid-state culture. One laccase was purified to a homogeneous preparation using anion-exchange, hydrophobic, and size-exclusion chromatography. SDS-PAGE analysis showed that the purified laccase, Lcc6, was a monomeric protein of 58.5 kDa. The optimum pH for enzyme activity was about 3.5, and the laccase was most active at 40°C. The N-terminal amino acid sequence of Lcc6 did not correspond to the sequence of Lcc1, which was previously purified from L. edodes. Lcc6 had decolorization activity to some chemical dyes.     

Kraft pulp biobleaching and mediated oxidation of a nonphenolic substrate by laccase from Streptomyces cyaneus CECT 3335

A new laccase (EC 1.10.3.2) produced by Streptomyces cyaneus CECT 3335 in liquid media containing soya flour (20 g per liter) was purified to homogeneity. The physicochemical, catalytic, and spectral characteristics of this enzyme, as well as its suitability for biobleaching of eucalyptus kraft pulps, were assessed. The purified laccase had a molecular mass of 75 kDa and an isoelectric point of 5.6, and its optimal pH and temperature were 4.5 and 70 degrees C, respectively. The activity was strongly enhanced in the presence of Cu(2+), Mn(2+), and Mg(2+) and was completely inhibited by EDTA and sodium azide. The purified laccase exhibited high levels of activity against 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS) and 2,6-dimethoxyphenol and no activity against tyrosine. The UV-visible spectrum of the purified laccase was the typical spectrum of the blue laccases, with an absorption peak at 600 nm and a shoulder around 330 to 340 nm. The ability of the purified laccase to oxidize a nonphenolic compound, such as veratryl alcohol, in the presence of ABTS opens up new possibilities for the use of bacterial laccases in the pulp and paper industry. We demonstrated that application of the laccase from S. cyaneus in the presence of ABTS to biobleaching of eucalyptus kraft pulps resulted in a significant decrease in the kappa number (2.3 U) and an important increase in the brightness (2.2%, as determined by the International Standard Organization test) of pulps, showing the suitability of laccases produced by streptomycetes for industrial purposes.     

Purification and characterisation of a novel laccase from the ascomycete Melanocarpus albomyces

A novel laccase from the ascomycete Melanocarpus albomyces was purified and characterised. The enzyme was purified using anion exchange chromatography, hydrophobic interaction chromatography and gel filtration, and the purified laccase was biochemically characterised. It had activity towards typical substrates of laccases including 2,2'-azinobis-(3-ethylbenzthiazoline-6-sulphonate), dimethoxyphenol, guaiacol, and syringaldazine. The laccase showed good thermostability and it had a pH optimum at neutral pH, both unusual properties for most known fungal laccases. The activity of the laccase from M. albomyces was highest at 60-70 degrees C. With guaiacol and syringaldazine the pH optima were rather broad: 5-7.5 and 6-7, respectively. It retained 50% of its activity after 5 h incubation at 60 degrees C. The molecular weight of the laccase was about 80 kDa and the isoelectric point 4.0. The ultraviolet-visible absorption and electron paramagnetic resonance spectra of the purified laccase indicated that the typical three types of copper were present.     

Purification and characterization of two laccase isoenzymes from a ligninolytic fungus Trametes gallica

Constant laccase activities were detected in culture supernatant of newly isolated basidiomycete Trametes gallica. Tryptone and glucose have great effects on the production of laccase. Two laccase isoenzymes (Lac I and Lac II) produced by T. gallica were purified to homogeneity (51- and 50-fold, respectively) by gel filtration chromatography, anion exchange chromatography, and improved native PAGE, with an overall yield of 24.8%. Lac I and Lac II from this fungus are glycoproteins with 3.6% and 4% carbohydrate content, the same molecular masses (by SDS-PAGE) of 60 kDa, and the pI of 3.1 and 3.0, respectively. Native gel electrophoresis indicates that the two laccases have different migration ratios. Lac I and Lac II have the same optimal pH of 3.0 on 2,6-dimethoxyphenol (DMP), pH 2.2 on 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), and of pH 4.0 on guaiacol. The highest rate of ABTS oxidation for both laccases was reached at 70 degrees C. Both laccases are stable from pH 6 to 9, retaining 88-90% activity after 24 hr incubation, and show good stability when incubated at temperatures lower than 40 degrees C. The Km values of Lac I for ABTS, DMP, and guaiacol are 0.118 x 10(-2), 0.420, and 0.405 mM, respectively; the Km values of Lac II for ABTS, DMP, and guaiacol are 0.086 x 10(-2), 0.41, and 0.40 mM, respectively. Their N-terminal sequences are determined and show strong similarity with those from other basidiomycetes. Graphite-furnace atomic absorption analysis revealed that both laccases have four copper atoms per protein molecule, but they have no type I copper signal at around 600 nm and a type III copper signal near 330 nm. Cyanide, azide, and halides completely inhibit the enzyme activity, whereas EDTA has less inhibition.     

Molecular docking and dynamics simulation analyses unraveling the differential enzymatic catalysis by plant and fungal laccases with respect to lignin biosynthesis and degradation

Laccase, widely distributed in bacteria, fungi, and plants, catalyzes the oxidation of wide range of compounds. With regards to one of the important physiological functions, plant laccases are considered to catalyze lignin biosynthesis while fungal laccases are considered for lignin degradation. The present study was undertaken to explain this dual function of laccases using in-silico molecular docking and dynamics simulation approaches. Modeling and superimposition analyses of one each representative of plant and fungal laccases, namely, Populus trichocarpa and Trametes versicolor, respectively, revealed low level of similarity in the folding of two laccases at 3D levels. Docking analyses revealed significantly higher binding efficiency for lignin model compounds, in proportion to their size, for fungal laccase as compared to that of plant laccase. Residues interacting with the model compounds at the respective enzyme active sites were found to be in conformity with their role in lignin biosynthesis and degradation. Molecular dynamics simulation analyses for the stability of docked complexes of plant and fungal laccases with lignin model compounds revealed that tetrameric lignin model compound remains attached to the active site of fungal laccase throughout the simulation period, while it protrudes outwards from the active site of plant laccase. Stability of these complexes was further analyzed on the basis of binding energy which revealed significantly higher stability of fungal laccase with tetrameric compound than that of plant. The overall data suggested a situation favorable for the degradation of lignin polymer by fungal laccase while its synthesis by plant laccase.     

Purification and characterization of a phenoloxidase (laccase) from the lignin-degrading basidiomycete PM1 (CECT 2971).

A new lignin-degrading basidiomycete, strain PM1 (= CECT 2971), was isolated from the wastewater of a paper factory. The major ligninolytic activity detected in the basidiomycete PM1 culture supernatant was a phenoloxidase (laccase). This activity was produced constitutively in defined or complex media and appeared as two protein bands in native gel electrophoresis preparations. No enzyme induction was found after treatment with certain potential laccase inducers. Laccase I was purified to homogeneity by gel filtration chromatography, anion-exchange chromatography, and hydrophobicity chromatography. The enzyme is a monomeric glycoprotein containing 6.5% carbohydrate and having a molecular weight of 64,000. It has an isoelectric point of 3.6, it is stable in a pH range from 3 to 9, and its optimum pH is 4.5. The laccase optimal reaction temperature is 80 degrees C, the laccase is stable for 1 h at 60 degrees C, and its activity increases with temperature. Spectroscopic analysis revealed that the enzyme has four bound copper atoms, a type I copper, a type II copper, and a type III binuclear copper. The amino-terminal sequence of the protein is very similar to the amino-terminal sequences of laccases from Coriolus hirsutus and Phlebia radiata.