Domain unfolding plays a role in superfibronectin formation

Superfibronectin (sFN) is a fibronectin (FN) aggregate that is formed by mixing FN with anastellin, a fragment of the first type III domain of FN. However, the mechanism of this aggregation has not been clear. In this study, we found that anastellin co-precipitated with FN in a ratio of approximately 4:1, anastellin:FN monomer. The primary binding site for anastellin was in the segment (III)1-3, which bound three molecules of anastellin and was able to form a precipitate without the rest of the FN molecule. Anastellin binding to (III)3 caused a conformational change in that domain that exposed a cryptic thermolysin-sensitive site. An additional anastellin binds to (III)11, where it enhances thermolysin digestion of (III)11. An engineered disulfide bond in (III)3 inhibited both aggregation and protease digestion, suggesting that the stability of (III)3 is a key factor in sFN formation. We propose a three-step model for sFN formation: 1) FN-III domains spontaneously unfold and refold; 2) anastellin binds to an unfolded domain, preventing its refolding and leaving it with exposed hydrophobic surfaces and beta-sheet edges; and 3) these exposed elements bind to similar exposed elements on other molecules, leading to aggregation. The model is consistent with our observation that the kinetics of aggregation are first order, with a reaction time of 500-700 s. Similar mechanisms may contribute to the assembly of the native FN matrix.     

SLLISWD Sequence in the 10FNIII Domain Initiates Fibronectin Fibrillogenesis

Fibronectin (FN) assembly into extracellular matrix is tightly regulated and essential to embryogenesis and wound healing. FN fibrillogenesis is initiated by cytoskeleton-derived tensional forces transmitted across transmembrane integrins onto RGD binding sequences within the tenth FN type III (10FNIII) domains. These forces unfold 10FNIII to expose cryptic FN assembly sites; however, a specific sequence has not been identified in 10FNIII. Our past steered molecular dynamics simulations modeling 10FNIII unfolding by force at its RGD loop predicted a mechanical intermediate with a solvent-exposed N terminus spanning the A and B β-strands. Here, we experimentally confirm that the predicted 23-residue cryptic peptide 1 (CP1) initiates FN multimerization, which is mediated by interactions with 10FNIII that expose hydrophobic surfaces that support 8-anilino-1-napthalenesulfonic acid binding. Localization of multimerization activity to the C terminus led to the discovery of a minimal 7-amino acid “multimerization sequence” (SLLISWD), which induces polymerization of FN and the clotting protein fibrinogen in addition to enhancing FN fibrillogenesis in fibroblasts. A point mutation at Trp-6 that reduces exposure of hydrophobic sites for 8-anilino-1-napthalenesulfonic acid binding and β-structure formation inhibits FN multimerization and prevents physiological cell-based FN assembly in culture. We propose a model for cell-mediated fibrillogenesis whereby cell traction force initiates a cascade of intermolecular exchange starting with the unfolding of 10FNIII to expose the multimerization sequence, which interacts with strand B of another 10FNIII domain via a Trp-mediated β-strand exchange to stabilize a partially unfolded intermediate that propagates FN self-assembly.     

Ligation of the fibrin-binding domain by β-strand addition is sufficient for expansion of soluble fibronectin

How fibronectin (FN) converts from a compact plasma protein to a fibrillar component of extracellular matrix is not understood. "Functional upstream domain" (FUD), a polypeptide based on F1 adhesin of Streptococcus pyogenes, binds by anti-parallel β-strand addition to discontinuous sets of N-terminal FN type I modules, (2-5)FNI of the fibrin-binding domain and (8-9)FNI of the gelatin-binding domain. Such binding blocks assembly of FN. To learn whether ligation of (2-5)FNI, (8-9)FNI, or the two sets in combination is important for inhibition, we tested "high affinity downstream domain" (HADD), which binds by β-strand addition to the continuous set of FNI modules, (1-5)FNI, comprising the fibrin-binding domain. HADD and FUD were similarly active in blocking fibronectin assembly. Binding of HADD or FUD to soluble plasma FN exposed the epitope to monoclonal antibody mAbIII-10 in the tenth FN type III module ((10)FNIII) and caused expansion of FN as assessed by dynamic light scattering. Soluble N-terminal constructs truncated after (9)FNI or (3)FNIII competed better than soluble FN for binding of FUD or HADD to adsorbed FN, indicating that interactions involving type III modules more C-terminal than (3)FNIII limit β-strand addition to (1-5)FNI within intact soluble FN. Preincubation of FN with mAbIII-10 or heparin modestly increased binding to HADD or FUD. Thus, ligation of FNIII modules involved in binding of integrins and glycosaminoglycans, (10)FNIII and (12-14)FNIII, increases accessibility of (1-5)FNI. Allosteric loss of constraining interactions among (1-5)FNI, (10)FNIII, and (12-14)FNIII likely enables assembly of FN into extracellular fibrils.     

Human fibronectin and MMP-2 collagen binding domains compete for collagen binding sites and modify cellular activation of MMP-2.

The region of fibronectin (FN) surrounding the two type II modules of FN binds type I collagen. However, little is known about interactions of this collagen binding domain with other collagen types or extracellular matrix molecules. Among several expressed recombinant (r) human FN fragments from the collagen binding region of FN, only rI6-I7, which included the two type II modules and both flanking type I modules, bound any of several tested collagens. The rI6-I7 interacted specifically with both native and denatured forms of types I and III collagen as well as denatured types II, IV, V and X collagen with apparent K(d) values of 0.2-3.7 x 10(-7) M. Reduction with DTT disrupted the binding to gelatin verifying the functional requirement for intact disulfide bonds. The FN fragments showed a weak, but not physiologically important, binding to heparin, and did not bind elastin or laminin. The broad, but selective range of ligand interactions by rI6-I7 mirrored our prior observations for the collagen binding domain (rCBD) from matrix metalloproteinase-2 (MMP-2) [J. Biol. Chem. 270 (1995) 11555]. Subsequent experiments showed competition between rI6-I7 and rCBD for binding to gelatin indicating that their binding sites on this extracellular matrix molecule are identical or closely positioned. Two collagen binding domain fragments supported cell attachment by a beta1-integrin-dependent mechanism although neither protein contains an Arg-Gly-Asp recognition sequence. Furthermore, activation of MMP-2 and MMP-9 was greatly reduced for HT1080 fibrosarcoma cells cultured on either of the fibronectin fragments compared to full-length FN. These observations imply that the biological activities of FN in the extracellular matrix may involve interactions with a broad range of collagen types, and that exposure to pathologically-generated FN fragments may substantially alter cell behavior and regulation.     

Urea-induced sequential unfolding of fibronectin: a fluorescence spectroscopy and circular dichroism study

Fibronectin (FN) is an extracellular matrix (ECM) protein found soluble in corporal fluids or as an insoluble fibrillar component incorporated in the ECM. This phenomenon implicates structural changes that expose FN binding sites and activate the protein to promote intermolecular interactions with other FN. We have investigated, using fluorescence and circular dichroism spectroscopy, the unfolding process of human fibronectin induced by urea in different ionic strength conditions. At any ionic strength, the equilibrium unfolding data are well described by a four-state equilibrium model N <= => I(1) <= =>I(2) <= => U. Fitting this model to experimental values, we have determined the free energy change for the different steps. We found that the N <= => I(1) transition corresponds to a free energy of 10.5 +/- 0.4 kcal/mol. Comparable values of free energy change are generally associated with a partial unfolding of the type III domain. For the I(1) <= => I(2) transition, the free energy change is 7.6 +/- 0.4 kcal/mol at low ionic strength but is twice as low at high ionic strength. This result is consistent with observations indicating that the complete unfolding of the type III domain from partially unfolded forms necessitates about 5 kcal/mol. The third step, I(2) <= => U, which leads to the complete unfolding of fibronectin, corresponds to a free energy change of 14.4 +/- 0.9 kcal/mol at low ionic strength whereas this energy is again twice as low under high ionic strength conditions. This hierarchical unfolding of fibronectin, as well as the stability of the different intermediates controlled by ionic strength demonstrated here, could be important for the understanding of activation of the matrix assembly.     

Extended binding site on fibronectin for the functional upstream domain of protein F1 of Streptococcus pyogenes

The 49-residue functional upstream domain (FUD) of Streptococcus pyogenes F1 adhesin interacts with fibronectin (FN) in a heretofore unknown manner that prevents assembly of a FN matrix. Biotinylated FUD (b-FUD) bound to adsorbed FN or its recombinant N-terminal 70-kDa fibrin- and gelatin-binding fragment (70K). Binding was blocked by FN or 70K, but not by fibrin- or gelatin-binding subfragments of 70K. Isothermal titration calorimetry showed that FUD binds with K(d) values of 5.2 and 59 nM to soluble 70K and FN, respectively. We tested sets of FUD mutants and epitope-mapped monoclonal antibodies (mAbs) for ability to compete with b-FUD for binding to FN or to block FN assembly by cultured fibroblasts. Deletions or alanine substitutions throughout FUD caused loss of both activities. mAb 4D1 to the (2)FNI module had little effect, whereas mAb 7D5 to the (4)FNI module in the fibrin-binding region, 5C3 to the (9)FNI module in the gelatin-binding region, or L8 to the G-strand of (1)FNIII module adjacent to (9)FNI caused loss of binding of b-FUD to FN and decreased FN assembly. Conversely, FUD blocked binding of 7D5, 5C3, or L8, but not of 4D1, to FN. Circular dichroism indicated that FUD binds to 70K by β-strand addition, a possibility supported by modeling based on crystal structures of peptides bound to (2)FNI-(5)FNI of the fibrin-binding domain and (8)FNI-(9)FNI of the gelatin-binding domain. Thus, the interaction likely involves an extensive anti-parallel β-zipper in which FUD interacts with the E-strands of (2)FNI-(5)FNI and (8)FNI-(9)FNI.     

A novel fibronectin binding site required for fibronectin fibril growth during matrix assembly

Fibronectin (FN) assembly into a fibrillar extracellular matrix is a stepwise process requiring participation from multiple FN domains. Fibril formation is regulated in part by segments within the first seven type III repeats (III1-7). To define the specific function(s) of this region, recombinant FNs (recFNs) containing an overlapping set of deletions were tested for the ability to assemble into fibrils. Surprisingly, recFN lacking type III repeat III1 (FNDeltaIII1), which contains a cryptic FN binding site and has been suggested to be essential for fibril assembly, formed a matrix identical in all respects to a native FN matrix. Similarly, displacement of the cell binding domain in repeats III9-10 to a position close to the NH2-terminal assembly domain, as well as a large deletion spanning repeats III4-7, had no effect on assembly. In contrast, two deletions that included repeat III2, DeltaIII1-2 and DeltaIII2-5, caused significant reductions in fibril elongation, although binding of FN to the cell surface and initiation of assembly still proceeded. Using individual repeats in binding assays, we show that III2 but not III1 contains an FN binding site. Thus, these results pinpoint repeat III2 as an important module for FN-FN interactions during fibril growth.     

Role of the Disulfide Bond in Prion Protein Amyloid Formation: A Thermodynamic and Kinetic Analysis

Prion diseases are associated with the structural conversion of prion protein (PrP) to a β-sheet-rich aggregate, PrP^Sc. Previous studies have indicated that a reduction of the disulfide bond linking C179 and C214 of PrP yields an amyloidlike β-rich aggregate in vitro. To gain mechanistic insights into the reduction-induced aggregation, here I characterized how disulfide bond reduction modulates the protein folding/misfolding landscape of PrP, by examining 1) the equilibrium stabilities of the native (N) and aggregated states relative to the unfolded (U) state, 2) the transition barrier separating the U and aggregated states, and 3) the final structure of amyloidlike misfolded aggregates. Kinetic and thermodynamic experiments revealed that disulfide bond reduction decreases the equilibrium stabilities of both the N and aggregated states by ～3 kcal/mol, without changing either the amyloidlike aggregate structure, at least at the secondary structural level, or the transition barrier of aggregation. Therefore, disulfide bond reduction modulates the protein folding/misfolding landscape by entropically stabilizing disordered states, including the U and transition state of aggregation. This also indicates that the equilibrium stability of the N state, but not the transition barrier of aggregation, is the dominant factor determining the reduction-induced aggregation of PrP.     

Altered rate of fibronectin matrix assembly by deletion of the first type III repeats

The assembly of fibronectin (FN) into a fibrillar matrix is a complex stepwise process that involves binding to integrin receptors as well as interactions between FN molecules. To follow the progression of matrix formation and determine the stages during which specific domains function, we have developed cell lines that lack an endogenous FN matrix but will form fibrils when provided with exogenous FN. Recombinant FNs (recFN) containing deletions of either the RGD cell- binding sequence (RGD-) or the first type III repeats (FN delta III1-7) including the III1 FN binding site were generated with the baculovirus insect cell expression system. After addition to cells, recFN matrix assembly was monitored by indirect immunofluorescence and by insolubility in the detergent deoxycholate (DOC). In the absence of any native FN, FN delta III1-7 was assembled into fibrils and was converted into DOC-insoluble matrix. This process could be inhibited by the amino- terminal 70 kD fragment of FN, showing that FN delta III1-7 follows an assembly pathway similar to FN. The progression of FN delta III1-7 assembly differed from native FN in that the recFN became DOC-insoluble more quickly. In contrast, RGD- recFNs were not formed into fibrils except when added in combination with native FN. These results show that the RGD sequence is essential for the initiation step but fibrils can form independently of the III1-7 modules. The altered rate of FN delta III1-7 assembly suggests that one function of the missing repeats might be to modulate an early stage of matrix formation.     

Local unfolding of Cu, Zn superoxide dismutase monomer determines the morphology of fibrillar aggregates

Aggregation of Cu, Zn superoxide dismutase (SOD1) is often found in amyotrophic lateral sclerosis patients. The fibrillar aggregates formed by wild type and various disease-associated mutants have recently been found to have distinct cores and morphologies. Previous computational and experimental studies of wild-type SOD1 suggest that the apo-monomer, highly aggregation prone, displays substantial local unfolding dynamics. The residual folded structure of locally unfolded apoSOD1 corresponds to peptide segments forming the aggregation core as identified by a combination of proteolysis and mass spectroscopy. Therefore, we hypothesize that the destabilization of apoSOD1 caused by various mutations leads to distinct local unfolding dynamics. The partially unfolded structure, exposing the hydrophobic core and backbone hydrogen bond donors and acceptors, is prone to aggregate. The peptide segments in the residual folded structures form the "building block" for aggregation, which in turn determines the morphology of the aggregates. To test this hypothesis, we apply a multiscale simulation approach to study the aggregation of three typical SOD1 variants: wild type, G37R, and I149T. Each of these SOD1 variants has distinct peptide segments forming the core structure and features different aggregate morphologies. We perform atomistic molecular dynamics simulations to study the conformational dynamics of apoSOD1 monomer and coarse-grained molecular dynamics simulations to study the aggregation of partially unfolded SOD1 monomers. Our computational studies of monomer local unfolding and the aggregation of different SOD1 variants are consistent with experiments, supporting the hypothesis of the formation of aggregation "building blocks" via apo-monomer local unfolding as the mechanism of SOD1 fibrillar aggregation.     

Probing the folded state of fibronectin type III domains in stretched fibrils by measuring buried cysteine accessibility

Fibronectin (FN) is an extracellular matrix protein that is assembled into fibrils by cells during tissue morphogenesis and wound healing. FN matrix fibrils are highly elastic, but the mechanism of elasticity has been debated: it may be achieved by mechanical unfolding of FN-III domains or by a conformational change of the molecule without domain unfolding. Here, we investigate the folded state of FN-III domains in FN fibrils by measuring the accessibility of buried cysteines. Four of the 15 FN-III domains (III-2, -3, -9, and -11) appear to unfold in both stretched fibrils and in solution, suggesting that these domains spontaneously open and close even in the absence of tension. Two FN-III domains (III-6 and -12) appear to unfold only in fibrils and not in solution. These results suggest that domain unfolding can at best contribute partially to the 4-fold extensibility of fibronectin fibrils.     

Steered molecular dynamics studies of titin I1 domain unfolding

The cardiac muscle protein titin, responsible for developing passive elasticity and extensibility of muscle, possesses about 40 immunoglobulin-like (Ig) domains in its I-band region. Atomic force microscopy (AFM) and steered molecular dynamics (SMD) have been successfully combined to investigate the reversible unfolding of individual Ig domains. However, previous SMD studies of titin I-band modules have been restricted to I27, the only structurally known Ig domain from the distal region of the titin I-band. In this paper we report SMD simulations unfolding I1, the first structurally available Ig domain from the proximal region of the titin I-band. The simulations are carried out with a view toward upcoming atomic force microscopy experiments. Both constant velocity and constant force stretching have been employed to model mechanical unfolding of oxidized I1, which has a disulfide bond bridging beta-strands C and E, as well as reduced I1, in which the disulfide bridge is absent. The simulations reveal that I1 is protected against external stress mainly through six interstrand hydrogen bonds between its A and B beta-strands. The disulfide bond enhances the mechanical stability of oxidized I1 domains by restricting the rupture of backbone hydrogen bonds between the A'- and G-strands. The disulfide bond also limits the maximum extension of I1 to approximately 220 A. Comparison of the unfolding pathways of I1 and I27 are provided and implications to AFM experiments are discussed.     

Regulation of p38 MAP kinase by anastellin is independent of anastellin's effect on matrix fibronectin

Anastellin is an angiogenesis inhibitor derived from the first type III repeat of fibronectin (FN). Anastellin binds to fibronectin and promotes the polymerization of soluble fibronectin into a highly polymerized form termed superfibronectin. In addition, anastellin also causes remodeling of pre-existing fibronectin matrix and modulates cell signaling pathways in both endothelial cells and fibroblasts. In the present study, we address the relationship of anastellin's effects on fibronectin matrix to its effects on p38 MAP kinase (MAPK) activation. Using a mutant form of anastellin which binds to fibronectin matrix, but does not stimulate formation of superfibronectin, we demonstrate that the activation of p38 MAPK by anastellin is not dependent on the formation of superfibronectin. The mutant form of anastellin does stimulate matrix remodeling, but experiments using FN^?/? cells show that the effect of anastellin on p38-MAPK activation is completely independent of fibronectin. Anastellin was able to activate p38 MAPK on cells in suspension as well as on cells null for β1 integrins, suggesting that anastellin activity did not require ligation of integrins. These data suggest that the activation of p38 MAPK by anastellin is independent of anastellin's effects on fibronectin matrix organization.     

Increased aggregation propensity of IgG2 subclass over IgG1: Role of conformational changes and covalent character in isolated aggregates

Aggregation of human therapeutic antibodies represents a significant hurdle to product development. In a test across multiple antibodies, it was observed that IgG1 antibodies aggregated less, on average, than IgG2 antibodies under physiological pH and mildly elevated temperature. This phenomenon was also observed for IgG1 and IgG2 subclasses of anti‐streptavidin, which shared 95% sequence identity but varied in interchain disulfide connectivity. To investigate the structural and covalent changes associated with greater aggregation in IgG2 subclasses, soluble aggregates from the two forms of anti‐streptavidin were isolated and characterized. Sedimentation velocity analytical ultracentrifugation (SV‐AUC) measurements confirmed that the aggregates were present in solution, and revealed that the IgG1 aggregate was composed of a predominant species, whereas the IgG2 aggregate was heterogeneous. Tertiary structural changes accompanied antibody aggregation as evidenced by greater ANS (8‐Anilino‐1‐naphthalene sulfonic acid) binding to the aggregates over monomer, and differences in disulfide character and tryptophan environments between monomer, oligomer and aggregate species, as observed by near‐UV circular dichroism (CD). Differences between subclasses were observed in the secondary structural changes that accompanied aggregation, particularly in the intermolecular β‐sheet and turn structures between the monomer and aggregate species. Free thiol determination showed ～2.4‐fold lower quantity of free cysteines in the IgG1 subclass, consistent with the 2.4‐fold reduction in aggregation of the IgG1 form when compared with IgG2 under these conditions. These observations suggested an important role for disulfide bond formation, as well as secondary and tertiary structural transitions, during antibody aggregation. Such degradations may be minimized using appropriate formulation conditions.     

Fibronectin matrix assembly regulates alpha5beta1-mediated cell cohesion

Integrin-extracellular matrix (ECM) interactions in two-dimensional (2D) culture systems are widely studied (Goldstein and DiMilla, 2002. J Biomed. Mater. Res. 59, 665-675; Koo et al., 2002. J. Cell Sci. 115, 1423-1433). Less understood is the role of the ECM in promoting intercellular cohesion in three-dimensional (3D) environments. We have demonstrated that the alpha5beta1-integrin mediates strong intercellular cohesion of 3D cellular aggregates (Robinson et al., 2003. J. Cell Sci. 116, 377-386). To further investigate the mechanism of alpha5beta1-mediated cohesivity, we used a series of chimeric alpha5beta1-integrin-expressing cells cultured as multilayer cellular aggregates. In these cell lines, the alpha5 subunit cytoplasmic domain distal to the GFFKR sequence was truncated, replaced with that of the integrin alpha4, the integrin alpha2, or maintained intact. Using these cells, alpha5beta1-integrin-mediated cell aggregation, compaction and cohesion were determined and correlated with FN matrix assembly. The data presented demonstrate that cells cultured in the absence of external mechanical support can assemble a FN matrix that promotes integrin-mediated aggregate compaction and cohesion. Further, inhibition of FN matrix assembly blocks the intercellular associations required for compaction, resulting in cell dispersal. These results demonstrate that FN matrix assembly contributes significantly to tissue cohesion and represents an alternative mechanism for regulating tissue architecture.     

Dissimilarity in the reductive unfolding pathways of two ribonuclease homologues

Using DTT(red) as the reducing agent, the kinetics of the reductive unfolding of onconase, a frog ribonuclease, has been examined. An intermediate containing three disulfides, Ir, that is formed rapidly in the reductive pathway, is more resistant to further reduction than the parent molecule, indicating that the remaining disulfides in onconase are less accessible to DTT(red). Disulfide-bond mapping of Ir indicated that it is a single species lacking the (30-75) disulfide bond. The reductive unfolding pattern of onconase is consistent with an analysis of the exposed surface area of the cysteine sulfur atoms in the (30-75) disulfide bond, which reveals that these atoms are about four- and sevenfold, respectively, more exposed than those in the next two maximally exposed disulfides. By contrast, in the reductive unfolding of the homologue, RNase A, there are two intermediates, arising from the reduction of the (40-95) and (65-72) disulfide bonds, which takes place in parallel, and on a much longer time-scale, compared to the initial reduction of onconase; this behavior is consistent with the almost equally exposed surface areas of the cysteine sulfur atoms that form the (40-95) and (65-72) disulfide bonds in RNase A and the fourfold more exposed cysteine sulfur atoms of the (30-75) disulfide bond in onconase. Analysis and in silico mutation of the residues around the (40-95) disulfide bond in RNase A, which is analogous to the (30-75) disulfide bond of onconase, reveal that the side-chain of tyrosine 92 of RNase A, a highly conserved residue among mammalian pancreatic ribonucleases, lies atop the (40-95) disulfide bond, resulting in a shielding of the corresponding sulfur atoms from the solvent; such burial of the (30-75) sulfur atoms is absent from onconase, due to the replacement of Tyr92 by Arg73, which is situated away from the (30-75) disulfide bond and into the solvent, resulting in the large exposed surface-area of the cysteine sulfur atoms forming this bond. Removal of Tyr92 from RNase A resulted in the relatively rapid reduction of the mutant to form a single intermediate (des [40-95] Y92A), i.e. it resulted in an onconase-like reductive unfolding behavior. The reduction of the P93A mutant of RNase A proceeds through a single intermediate, the des [40-95] P93A species, as in onconase. Although mutation of Pro93 to Ala does not increase the exposed surface area of the (40-95) cysteine sulfur atoms, structural analysis of the mutant reveals that there is greater flexibility in the (40-95) disulfide bond compared to the (65-72) disulfide bond that may make the (40-95) disulfide bond much easier to expose, consistent with the reductive unfolding pathway and kinetics of P93A. Mutation of Tyr92 to Phe92 in RNase A has no effect on its reductive unfolding pathway, suggesting that the hydrogen bond between the hydroxyl group of Tyr92 and the carbonyl group of Lys37 has no impact on the local unfolding free energy required to expose the (40-95) disulfide bond. Thus, these data shed light on the differences between the reductive unfolding pathways of the two homologous proteins and provide a structural basis for the origin of this difference.     

Adrenocortical zonation factor 1 is a novel matricellular protein promoting integrin-mediated adhesion of adrenocortical and vascular smooth muscle cells

Expression of a previously cloned secretory protein named adrenocortical zonation factor 1 (AZ-1, also called Tin-ag-RP or lipocalin 7) is tightly linked with the zonal differentiation of adrenocortical cells. It is also present in vascular smooth muscle (VSM), although its function has remained unknown. In this study, the location of AZ-1 was specified to the basal laminae along adrenocortical sinusoidal capillaries and surrounding VSM cells in the arterial system, consistent with the fact that AZ-1 was extractable under denaturing conditions as a 52 kDa polypeptide. Purified recombinant AZ-1 exhibited abilities to bind to fibronectins via the first type III repeat (anastellin) and to collagens with affinities in submicromolar ranges. AZ-1 immobilized on substratum or bound to collagens or anastellin promoted adhesion and spreading of adrenocortical cells. Although VSM cells spread on AZ-1 slowly, AZ-1 bound to anastellin facilitated the spreading. The adhesion activity of AZ-1 was mediated by a subset of integrins, including alpha(1)beta(1), alpha(2)beta(1), and alpha(5)beta(1), in a cell type-specific manner. Collectively with the putative role of AZ-1 in the adrenocortical zonation, we propose that AZ-1 potentially regulates functions of adrenocortical and VSM cells by modulating cell-matrix interactions.     

An engineered disulfide bridge mimics the effect of calcium to protect neutral protease against local unfolding

The extreme thermal stabilization achieved by the introduction of a disulfide bond (G8C/N60C) into the cysteine-free wild-type-like mutant (pWT) of the neutral protease from Bacillus stearothermophilus[Mansfeld J, Vriend G, Dijkstra BW, Veltman OR, Van den Burg B, Venema G, Ulbrich-Hofmann R & Eijsink VG (1997) J Biol Chem272, 11152-11156] was attributed to the fixation of the loop region 56-69. In this study, the role of calcium ions in the guanidine hydrochloride (GdnHCl)-induced unfolding and autoproteolysis kinetics of pWT and G8C/N60C was analyzed by fluorescence spectroscopy, far-UV CD spectroscopy and SDS/PAGE. First-order rate constants (kobs) were evaluated by chevron plots (ln kobs vs. GdnHCl concentration). The kobs of unfolding showed a difference of nearly six orders of magnitude (DeltaDeltaG# = 33.5 kJ.mol(-1) at 25 degrees C) between calcium saturation (at 100 mM CaCl2) and complete removal of calcium ions (in the presence of 100 mM EDTA). Analysis of the protease variant W55F indicated that calcium binding-site III, situated in the critical region 56-69, determines the stability at calcium ion concentrations between 5 and 50 mM. In the chevron plots the disulfide bridge in G8C/N60C shows a similar effect compared with pWT as the addition of calcium ions, suggesting that the introduced disulfide bridge fixes the region (near calcium binding-site III) that is responsible for unfolding and subsequent autoproteolysis. Owing to the presence of the disulfide bridge, the DeltaDeltaG# is 13.2 kJ.mol(-1) at 25 degrees C and 5 mM CaCl2. Non-linear chevron plots reveal an intermediate in unfolding probably caused by local unfolding of the loop 56-69. The occurrence of this intermediate is prevented by calcium concentrations of > 5 mM, or the introduction of the disulfide bridge G8C/N60C.     

Extrinsic 33-kilodalton protein of spinach oxygen-evolving complexes: kinetic studies of folding and disulfide reduction

The 33-kDa protein is one of the three extrinsic proteins in the oxygen-evolving photosystem II complexes. The protein has one intrachain disulfide bond. On reduction of this disulfide bond, the protein was unfolded and lost its activity. On the basis of the unfolding equilibrium curve obtained by using guanidine hydrochloride, the free energy change of unfolding in the absence of guanidine hydrochloride was estimated to be 4.4 kcal/mol using the Tanford method [Tanford, C. (1970) Adv. Protein Chem. 24, 1-95] and 2.8 kcal/mol using the linear extrapolation method. The unfolding of the 33-kDa protein caused by reduction was explained in terms of the entropy change associated with reduction of the intrachain disulfide bond. The kinetics of the reduction of the disulfide bond using dithiothreitol were studied at various concentrations of guanidine hydrochloride at pH 7.5 and 25 degrees C. The disulfide bond was reduced even in the absence of guanidine hydrochloride. The unfolding and refolding kinetics of the 33-kDa protein using guanidine hydrochloride were also studied under the same conditions, and the results were compared with those for the reduction kinetics. It was shown that the reduction of the disulfide bond proceeds through a species in which the disulfide bond is exposed by local fluctuations.