Fine Structure Genetic and Physical Map of the Phage P22 Tail Protein Gene

Bacteriophage P22 which are incapable of making functional tail protein can be propagated by the addition of purified mature tail protein trimers to either liquid or solidified medium. This unique in vitro complementation condition has allowed us to isolate 74 absolute lethal tail protein mutants of P22 after hydroxylamine mutagenesis. These phage mutants have an absolute requirement for purified P22 tail protein to be present in a soft agar overlay in order to form plaques and do not grow on any nonsense suppressing strains of Salmonella typhimurium. In order to genetically map and physically locate these mutations we have constructed two complementary sets of fine structure deletion mapping strains using a collection of Tn1 insertions in gene 9, the structural gene for the tail protein. Fourteen bacteriophage P22 strains carrying unique Tn1 transposon insertions (Ap phage) in gene 9 have been crossed with Ap phage carrying Tn1 insertions in gene 20. Phage carrying deletions that arose from homologous recombination between the Tn1 elements were isolated as P22 lysogens. The deletion prophage were shown to be missing all genetic information bracketed by the parental Tn1 elements and thus form a set of deletions into gene 9 from the 5' end of the gene. From the frequency of production of these deletion phage the orientation of the Tn1 insertions in gene 9 could be deduced. The genetic end points of the deletions in gene 9 and thus the order of Tn1 insertions were determined by marker rescue experiments using the original Ap phage. The genetic end points of the deletions in gene 20 were determined in similar experiments using nonsense mutations in gene 20. To locate the physical end points of these deletions in gene 9, DNA containing the Tn1 element has been cloned from each of the original Ap phage into plasmids. The precise point of insertion of Tn1 into gene 9 was determined by restriction enzyme mapping and DNA sequencing of the relevant portions of each of these plasmids. In vitro deletion of different 3' gene 9 sequences in the plasmid clones was accomplished through the use of unique restriction endonuclease sites in Tn1. The resulting plasmids form a set of deletions extending into the 3' end of the gene which are complementary compared to the deletion lysogens.(ABSTRACT TRUNCATED AT 400 WORDS)     

DNA sequence analysis of Tn10 insertions: origin and role of 9 bp flanking repetitions during Tn10 translocation.

The sequences of insertions of the translocatable tetracycline-resistance element Tn10 into the repressor (cl) gene of bacteriophage lambda have been analyzed. Each insertion contains the same discrete set of Tn10 sequences flanked by a direct repetition of a 9 bp cl-gene sequence. The flanking repititions are generated by duplication of information present only in the target DNA molecule rather than by a Campbell-type recombination event between one 9 bp sequence on the target DNA and a second one provided on the incoming element. The repetitions do not contain genetic or structural information important for translocation. A genetically constructed Tn10 insertion which lacks flanking repetitions is fully functional in translocation to a new position. Tn10 insertions cluster at preferred positions along a target DNA (Kleckner et al., 1979). Sequence analysis shows that four independently isolated cl::Tn10 insertions occur at identical positions in the cl gene. We speculate that homology between Tn10 and its target, at some distance from the site of the actual recombination event, could be relevant to the preference of Tn10 for particular insertion sites.     

Translocation specificity of the Tn3 element: characterization of sites of multiple insertions

247 independent events involving insertion of the TN3 transposable element into a 4 kb constructed plasmid (pTU4) of partially known DNA sequence were studied by restriction endonuclease mapping, and 65 of these insertion sites were examined further by DNA sequence analysis. Our results show that the previously proposed regional specificity for Tn3 insertion is associated with a strong preference for AT-rich segments as insertion sites. Moreover, multiple insertions of the Tn3 occurred at certain AT-rich nucleotide positions, and 23 of 26 independent insertion events at a single nucleotide position were found to be in the same orientation. A region of the recipient plasmid showing major homology with the terminal 18 bp of Tn3 was identified in the vicinity of an 11 nucleotide segment that included three insertional hot spots and 36 independent insertions. Our results indicate that the site and orientation of insertion of Tn3 are at least partly determined by the primary nucleotide sequence of the recipient genome, and suggest that insertional hot spots may result from the combined effects of AT richness plus homology of the recipient genome with the terminal sequences of Tn3.     

Specificity of Insertion by the Translocatable Tetracycline-Resistance Element Tn10

Genetic analysis of 131 independent transpositions of the tetracycline-resistance element Tn10 from a single site in phage P22 into the histidine operon of Salmonella typhimurium reveals that Tn10 insertions are not randomly distributed along this chromosomal target. The insertions occur in 22 different "clusters"; insertions within each cluster are very tightly linked in recombination tests. Tn10 insertions are not evenly distributed among the identified clusters. The existence of these clusters suggests that this chromosomal target contains particular genetic signals that guide Tn10 to particular preferred positions for insertion. Insertions within each cluster occur in both orientations with roughly equal frequency.--The relationship among different insertions within each cluster has been examined. The resolution of genetic mapping places an upper limit of about 50 basepairs on the distance between different insertions within a cluster. Different insertions within a cluster usually have the same reversion frequency; however, heterogeneity in reversion frequency has been detected in at least two clusters. For most clusters, the available data are consistent with the simple possibility that all insertions within a cluster are at identical positions; however, the data do not exclude other possibilities.     

Analysis of insertions of the determinant of drug resistance to kanamycin and chloramphenicol into bacteriophage lambda att80

The insertion sites of elements Tn9 and Tn601 which determine chloramphenicol and kanamycin resistance have been detected restriction analysis. The functioning of transposons i.e. their stability or instability, has been found to influence the specificity of their insertions into the genome of lambda att80 bacteriophage. During transposition from stable integration sites both transposons are inserted into the regions of the lambda att80 bacteriophage genome, definite for each transposon. However, during transposition from the site of unstable integration both determinants of drug resistance are inserted into different regions of the phage genome.     

Characteristic features of the structure of co-integrating plasmids and simple insertions formed during transposition of the IS1 element in transposon Tn9'

Earlier we have studied unstable dissociating IS1/Tn9'-mediated cointegrates between the plasmids pDK57 (pBR322::Tn9') and pRP3.1, a deletion derivative of RP1, and two types of such cointegrates containing three and four copies of IS1 were revealed. In the present paper we studied the structure of stable IS1/Tn9'-mediates cointegrates and simple insertions formed by interaction between the plasmids pDK57 and pRP3.1 in the E. coli recA- cells. It was shown, that the stable cointegrates were formed by insertion of pDK57 in different loci of pRP3.1 and these cointegrates contain three copies of IS1, i.e. one copy of IS1 and a copy of Tn9' at the junction of the two replicons. The cointegrates are formed predominantly due to the activity of the left copy of Tn9', which occupies a proximal position in regard to the promoter of the cat gene. It was found that the integration of pDK57 into the kan gene region of pRP3.1 leading to the formation of the KmS cointegrates occurs only in one of the two possible orientations. Meanwhile the insertions of the transposon Tn9' into the kan region of pRP3.1 leading to simple insertions occurs in the orientation opposite to the orientation of the transposon in the KmS cointegrates. It is proposed that simple insertions are not the products of direct transposition of Tn9', but they are formed from unstable cointegrates under the action of IS1-specific resolvase.     

Complementation analysis of Agrobacterium tumefaciens Ti plasmid virB genes by use of a vir promoter expression vector: virB9, virB10, and virB11 are essential virulence genes.

The virB gene products of the Agrobacterium tumefaciens tumor-inducing (Ti) plasmid have been proposed to mediate T-DNA transport through the bacterial cell wall into plant cells. Previous genetic analysis of the approximately 9.5-kilobase-pair virB operon has been limited to transposon insertion mutagenesis. Due to the polarity of the transposon insertions, only the last gene in the operon, virB11, is known to provide an essential virulence function. We have now begun to assess the contribution of the other virB genes to virulence. First, several previously isolated Tn3-HoHo1 insertions in the 3' end of the virB operon were precisely mapped by nucleotide sequence analysis. Protein extracts from A. tumefaciens strains harboring these insertions on the Ti plasmid were subjected to immunostaining analysis with VirB4-, VirB10-, and VirB11-specific antisera to determine the effect of the insertion on virB gene expression. In this manner, avirulent mutants containing polar insertions in the virB9 and virB10 genes were identified. To carry out a complementation analysis with these virB mutants, expression vectors were constructed that allow cloned genes to be expressed from the virB promoter in A. tumefaciens. These plasmids were used to express combinations of the virB9, virB10, and virB11 genes in trans in the virB insertion mutants, thereby creating strains lacking only one of these three virB gene products. Virulence assays on Kalanchoe daigremontiana demonstrated that in addition to virB11, the virB9 and virB10 genes are required for tumorigenicity.     

Transposition of Tn916 in the four replicons of the Butyrivibrio proteoclasticus B316(T) genome

The rumen bacterium Butyrivibrio proteoclasticus B316(T) has a 4.4-Mb genome composed of four replicons (approximately 3.55 Mb, 361, 302 and 186 kb). Mutagenesis of B316(T) was performed with the broad host-range conjugative transposon Tn916 to screen for functionally important characteristics. The insertion sites of 123 mutants containing a single copy of Tn916 were identified and corresponded to 53 different insertion points, of which 18 (34.0%), representing 39 mutants (31.7%), were in ORFs and 12 were where transposition occurred in both directions (top and bottom DNA strand). Up to eight mutants from several independent conjugation experiments were found to have the same integration site. Although transposition occurred in all four replicons, the number of specific insertion sites, transposition frequency and the average intertransposon distance between insertions varied between the four replicons. In silico analysis of the 53 insertion sites was used to model a target consensus sequence for Tn916 integration into B316(T) . A search of the B316(T) genome using the modelled target consensus sequence (up to two mismatches) identified 39 theoretical Tn916 insertion sites (19 coding, 20 noncoding), of which nine corresponded to Tn916 insertions identified in B316(T) mutants during our conjugation experiments.     

Tn5053 family transposons are res site hunters sensing plasmidal res sites occupied by cognate resolvases

DNA sequence database search revealed that most of Tn5053/Tn402 family transposons inserted into natural plasmids were located in putative res regions upstream of genes encoding various resolvase-like proteins. Some of these resolvase genes belonged to Tn3 family transposons and were closely related to the tnpR genes of Tn1721 and a recently detected Tn5044. Using recombinant plasmids containing fragments of Tn1721 or Tn5044 as targets in transposition experiments, we have demonstrated that Tn5053 displays striking insertional preference for the res regions of these transposons: more than 70% of Tn5053 insertion events occur in clusters inside the target res regions, while most remaining insertion events occur no further than 200 base pairs away from both sides of the res regions. We demonstrate that Tn5053 insertions (both into and outside a res region of the target plasmid) require the presence of a functional cognate resolvase gene either in cis or in trans. To our knowledge, this is the first case when a site-specific recombination system outside a transposon has been shown to be involved in transposition.     

Insertion of a transposon for chloramphenicol resistance into bacteriophage Mu.

We have isolated mutants of bacteriophage Mu carrying the X mutations caused by the insertion of cam (Tn9), a transposon for chloramphenicol resistance. The Mu X cam mutants were obtained by selecting for heat-resistant survivors of a Mucts62, P1cam dilysogen. Like the previously described X mutants, Mu X cam mutants are defective prophages which can be excised from the host DNA at a frequency of 10(-5) to 10(-7) per cell. Tn9 insertions in Mu X cam mutants are located within 5000 base pairs of the left end of Mu DNA in a region that controls early replication functions of Mu. There is one EcoRI cleavage site in Tn9. The Tn9 transposon itself can be excised precisely from the Mu X cam mutants to generate wild type Mu. In most Mu X cam mutants, precise excision of Tn9 occurs at a low frequency (10(-6) per cell), whereas in some, the frequency is higher (10(-4) per cell). Mu X cam prophages can replicate after induction with the help of wild type Mu. The lysates containing Mu X cam particles, however, fail to transduce chloramphenicol resistance at a high frequency; Mu X cam mutants apparently have a cis dominant defect in integration.     

Genetic analysis in Salmonella typhimurium with a small collection of randomly spaced insertions of transposon Tn10 delta 16 delta 17

We report the isolation of a group of 279 Salmonella typhimurium strains carrying randomly spaced insertions of the minitransposon Tn10 delta 16 delta 17 and describe the use of these strains to facilitate genetic analysis. The insertions were isolated initially in individual recombinant lambda clones from a genomic library. Individual insertions were then moved into the S. typhimurium chromosome, where the distribution of insertion sites relative to standard genetic markers was analyzed in a series of transductional crosses. Since a different, randomly chosen clone was used to generate each insertion, the distribution of insertion positions should have been as random as the cloning events leading to the formation of the library. In agreement with this expectation, most S. typhimurium markers tested were cotransducible with one or more of these Tn10 delta 16 delta 17 insertions. We expect that most new mutations will be quickly classified and mapped by determination of the pattern of cotransduction with this set of insertions. This use is illustrated by the analysis of a group of lac operon fusions regulated by anaerobiosis. We also describe several other applications that should make this collection a useful new tool in S. typhimurium genetics.     

The transposition properties of Tn2 in E. coli

We report the characterization of Tn2 transpositions into the chromosome and into an F' lacproB episome of E. coli. When Tn2 transposes into the chromosome a proportion of the insertions result in auxotrophy. These insertions can revert to prototrophs and lose ampicillin resistance concomitantly. However, Tn2 insertions in F' lacproB are often associated with deletions, and it seems probable that insertion and deletion occur simultaneously.     

Genetic analysis of transpositions in the lac region of Escherichia coli

The lac region of Escherichia coli, carried on an F′ lacproB episome, was used as a target for the transposition of several transposable elements. Tn9 shows a preferential integration (by a factor of 50) into a region extending from the end of the Z gene through the Y gene. Throughout the remainder of the lacI, Z and Y genes one other short region, located in the middle of the I gene, is favored for integration. Within these favored regions many different integration points are evident. Inspection of the DNA sequence for the I and Y genes, and parts of the Z gene, shows a strong correlation between A + T richness and regions of preferential integration. Tn5 insertions follow a similar pattern, although with less preference; whereas Tn10 insertions (provided by T. J. Foster), also favor the Y gene and the end of Z, but are distributed among fewer integration points. Most of the Tn3 insertions into the episome are accompanied by a nearby or adjacent deletion.     

Hfr formation directed by tn10

The transposable drug-resistance element, Tn10, can serve as a region of homology to direct the insertion of an F'ts114 lac plasmid into the chromosome of Salmonella typhimurium. Derivatives of F'ts114 lac were constructed that carry Tn10 insertions; these plasmids were transferred to strains having a Tn10 insertion in the chromosome. Under these circumstances, Hfr formation requires homologous recombination between plasmid-borne and chromosomal Tn10 elements. The process is dependent on recA function and on the presence of both Tn10 elements. All Hfr's isolated from a given merodiploid show the same direction of transfer. Depending on the orientation of Tn10 in the F' plasmid, Hfr's transferring in either direction can be obtained from any chromosomal Tn10 insertion. Since Tn10 insertions can be generated in any region of the chromosome, this method permits the isolation of Hfr's with either direction of transfer having their origin at almost any predetermined site. The Hfr's constructed by this method are sufficiently stable for standard genetic mapping crosses, and they have also been used to generate new F' plasmids. Implicit in the results above is the possibility of determining the orientation of any chromosomal Tn10 insertion by constructing an Hfr using a standard F' Tn10 plasmid and determining the direction of chromosome transfer. The general approaches described here are applicable to other transposable elements and other bacterial systems.     

Direct and crossover PCR amplification to facilitate Tn5supF-based sequencing of lambda phage clones.

The 264 bp mini-transposon Tn5supF was constructed to sequence DNAs cloned in phage lambda without extensive shotgun subcloning or primer walking. Unique sequences near each transposon end serve as primer binding sites, and a supF gene is used to select transposition to lambda. We describe here PCR methods that facilitate Tn5supF-based sequencing. In a first pass, insertions are mapped relative to the ends of the cloned fragment using pairs of primers specific for vector DNA next to the cloning site and for a Tn5supF end. Most insertions not mapped in this step are near the center of the cloned fragment or in the vector arms, and are then mapped relative to the two innermost insertions by 'crossover' PCR. This involves amplification from primers on different DNA molecules, and generates hybrid DNA products whose lengths correspond to the distances between the two insertions. We routinely amplified more than 6 kb in direct PCR and 3 kb in crossover PCR; at the limit we amplified up to approximately 10 kb in direct PCR and approximately 6 kb in crossover PCR, but not reproducibly. Crossover PCR products were also obtained with insertions separated by only 200 bp, indicating that no rare sites are needed to switch templates. PCR products were purified by adsorption and then elution from glass slurry, and sequenced directly. Ladders of more than 400 bp were obtained from primer sites on each DNA strand; 2 kb was read from crossover PCR products, and showed that they were amplified with fidelity. In conclusion, direct and crossover PCR methods expedite transposon insertion mapping, and yield templates for accurate sequencing of both DNA strands.     

Random insertion mutagenesis of the intracellular pathogen Rhodococcus equi using transposomes

The identification of virulence factors in Rhodococcus equi has been severely hampered by the lack of a method for in vivo random insertion mutagenesis. This study reports the use of transposomes to generate random insertions of a gene conferring kanamycin resistance into the genome of R. equi ATCC 33701. Southern hybridisation using the kanamycin resistance gene as probe showed that insertion of transposome is random. This was confirmed following nucleotide sequence analysis of the junction between the transposome and chromosomal DNA. The presence of a 9 bp duplication of the target sequence showed that random integration of the transposome was due to a bona fide Tn5 transposition event.